- 27 Jan, 2019 2 commits
-
-
Peter Rosin authored
The destination crtc rectangle is independent of source plane rotation. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-3-peda@axentia.se
-
Peter Rosin authored
Ouch, the driver rotates planes clockwise, which is simply not correct. Signed-off-by:
-
- 25 Jan, 2019 6 commits
-
-
Ville Syrjälä authored
We'll be wanting to send more than just infoframes over HDMI. So add an enum for other packet types. TODO: Maybe just include the infoframe types in the packet type enum and get rid of the infoframe type enum? v2: s/AUDIO_CP/ACP/ (Shashank) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Reviewed-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190110211445.24177-2-ville.syrjala@linux.intel.com
-
Chen-Yu Tsai authored
The A23's display pipeline is similar to the A33. Differences include: - Display backend supports larger layers, 8192x8192 instead of 2048x2048 - TCON has DMA input - There is no SAT module packed in the display backend Add support for the display pipeline and its components. As the MIPI DSI output device is not officially documented, and there are no A23 reference devices to test it, it is not covered by this patch. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-7-wens@csie.org
-
Chen-Yu Tsai authored
In some cases, such as running a new kernel with an old device tree that has the frontend disabled, the backend's matching frontend might be unavailable. When this happens, the layers should only declare support for formats that the backend support. This partially reverts commit 1c29d263 ("drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats") by bringing back sun4i_backend_layer_formats, and passing it to drm_universal_plane_init, while also dropping the modifiers list, in the event no frontend is available. Fixes: b636d3f9 ("drm/sun4i: frontend: Add support for the BGRX8888 input format") Fixes: 9afe52d5 ("drm/sun4i: frontend: Add support for semi-planar YUV input formats") Fixes: 8c8152bf ("drm/sun4i: frontend: Add support for planar YUV input formats") Fixes: b2ddf277 ("drm/sun4i: layer: Add tiled modifier support and helper") Signed-off-by:
-
Chen-Yu Tsai authored
We might want to use the backend pointer from DRM callbacks that get called within drm_universal_plane_init(), such as the .format_mod_supported callback. Move the assignment of the layer's backend pointer to right after the structure is allocated. Signed-off-by:
-
Chen-Yu Tsai authored
The display backend does not support BGRX8888. There is also no trace of this in the original list of supported formats before the commit b636d3f9 ("drm/sun4i: frontend: Add support for the BGRX8888 input format"). Nor do the backend configuration helpers handle this format. Remove BGRX8888 from list of supported formats by the backend. Fixes: 3d4265f8 ("drm/sun4i: backend: Add a helper and a list for supported formats") Signed-off-by:
-
Chen-Yu Tsai authored
The A23's display pipeline is similar to the A33. Differences include: - Display backend supports larger layers, 8192x8192 instead of 2048x2048 - TCON has DMA input - There is no SAT module packed in the display backend Add compatible strings for the display pipeline and its components. As the MIPI DSI output device is not officially documented, and there are no A23 reference devices to test it, it is not covered by this patch. Signed-off-by:
-
- 24 Jan, 2019 9 commits
-
-
Daniel Vetter authored
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by:
CK Hu <ck.hu@mediatek.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused rcar-du to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm x86 and arm allmodconfig. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-6-sam@ravnborg.org
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused cdns to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm x86 and arm allmodconfig. Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused arcgpu to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. List of include files sorted alphabetically. Build tested on arm x86 and arm allmodconfig. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused kirin to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. List of include files sorted alphabetically. Build tested on arm x86 allmodconfig using the following hack to the Kconfig file: | - depends on DRM && OF && ARM64 | + depends on DRM && OF && (ARM64 || (X86_64 && COMPILE_TEST)) Build failed on 32bit ARM - so the X86_64 hack was required. The COMPILE_TEST hack is not submitted as the preferred fix is something where we have coverage on 32bit ARM too. v2: - Sort list of include files Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused drm/stm to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm and x86 allmodconfig v2: - sort list of include files Signed-off-by:
-
Maxime Ripard authored
danvet needs a backmerge to ease the upcoming drmP.h rework Signed-off-by: -
Tetsuo Handa authored
syzbot is hitting a lockdep warning [1] because flush_work() is called without INIT_WORK() after kzalloc() at vkms_atomic_crtc_reset(). Commit 6c234fe3 ("drm/vkms: Implement CRC debugfs API") added INIT_WORK() to only vkms_atomic_crtc_duplicate_state() side. Assuming that lifecycle of crc_work is appropriately managed, fix this problem by adding INIT_WORK() to vkms_atomic_crtc_reset() side. [1] https://syzkaller.appspot.com/bug?id=a5954455fcfa51c29ca2ab55b203076337e1c770Reported-and-tested-by:
syzbot <syzbot+12f1b031b6da017e34f8@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- Unwind failure on pinning the gen7 PPGTT (Chris) - Fastset updates to make sure DRRS and PSR are properly enabled (Hans) - Header include clean-up (Brajeswar, Jani) - Improvements and clean-up on debugfs (Chris, Jani) - Avoid division by zero on CNL clocks setup (Xiao) - Restrict PSMI context load w/a to Haswell GT1 (Chris) - Remove HW semaphores for gen7 inter-engine sync (Chris) - Pull the render flush into breadcrumb emission (Chris) - i915_params copy and free helpers and other reorgs and docs (Jani) - Remove has_pooled_eu static initializer (Tvrtko) - Updates on kerneldoc (Chris) - Remove redundant trailing request flush (Chris) - ringbuffer irq seqno fixes and clean-up (Chris) - splitting off runtime device info and other clean-up around (Jani) - Selftests improvements (Chris, Daniele) - Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris) - Some improvements and fixes around GPU reset and GPU hang report (Chris) - Remove partial attempt to swizzle on pread/pwrite (Chris) - Return immediately if trylock fails for direct-reclaim (Chris) - Downgrade scare message for unknown HuC firmware (Jani) - ACPI / PMIC for MIPI / DSI (Hans) - Reduce i915_request_alloc retirement to local context (Chris) - Init per-engine WAs for all engines (Daniele) - drop DPF code for gen8+ (Daniele) - Guard error capture against unpinned vma (Chris) - Use mutex_lock_killable from inside the shrinker (Chris) - Removing pooling from struct_mutex from vmap shrinker (Chris) Signed-off-by:
Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA # Conflicts: # drivers/gpu/drm/i915/intel_dp.c # drivers/gpu/drm/i915/intel_drv.h From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
-
- 22 Jan, 2019 3 commits
-
-
Hsin-Yi, Wang authored
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare(). This also fixes some mode check and irq timeout issue in MTK dsi code. Since some dsi code (e.g. mtk_dsi) have following call trace: 1. drm_panel_disable(), which calls innolux_panel_disable() 2. switch to cmd mode 3. drm_panel_unprepare(), which calls innolux_panel_unprepare() However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare. Signed-off-by:
Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
-
Ville Syrjälä authored
Consult the I2C_M_STOP flag to determine whether to set the MOT bit or not. Makes it possible to send multiple messages in one go with stop+start generated between the messages (as opposed nothing or repstart depending on whether thr address/rw changed). Not sure anyone has actual use for this but figured I'd handle it since I started to look at that flag for MST remote i2c xfers. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Jani Nikula authored
We have a wrapper for a reason. Reviewed-by:
-
- 21 Jan, 2019 2 commits
-
-
Sam Ravnborg authored
Reversed logic when writing the original comment, now fixed. Fixes: e9eafcb5 ("drm: move drm_can_sleep() to drm_util.h") Reported-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check': drivers/gpu/drm/stm/ltdc.c:694:13: warning: variable 'src_y' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ ^ drivers/gpu/drm/stm/ltdc.c:694:6: warning: variable 'src_x' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 18 Jan, 2019 18 commits
-
-
Paul Kocialkowski authored
This adds the appropriate device-tree compatible for hooking frontend support for the A20. Since the hardware is very similar to the A10, it shares the same quirks (which were already introduced). Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
This adds the appropriate device-tree compatible and quirk data for hooking frontend support for the A20. It supports the FIR coefficients ready bit but not the access control bit. It also takes different phase values than the A33 for these coefficients. The compatible is already used in the A10 device-tree and already documented in the device-tree bindings. Signed-off-by:
-
Maxime Ripard authored
The FIR filters phase depend on the SoC, so let's move it to our quirks structure instead of removing them. Reviewed-by:
-
Maxime Ripard authored
The COEF_RDY bit isn't found in all the SoCs featuring some variant of the frontend. Add it to our quirks structure. Reviewed-by:
-
Maxime Ripard authored
The COEF_RDY bit is used to tell the hardware that new FIR filters coefficients have been written to the registers and that the hardware should take them into account starting next frame. Reviewed-by:
-
Maxime Ripard authored
The ACCESS_CTRL bit is not found on all the variants of the frontend, so let's introduce a structure that will hold whether or not we need to set it, and associate it with the compatible. This will be extended for further similar quirks later on. Reviewed-by:
-
Maxime Ripard authored
Unlike what is currently being done, the ACCESS_CTRL bit documentation asks that this bit should be set before modifying any register. The code in the BSP also does this, so make sure we do this as well. Reviewed-by:
-
Paul Kocialkowski authored
This is the final step to indicate to the core that our driver supports framebuffer modifiers. Signed-off-by:
-
Paul Kocialkowski authored
This introduces a list of supported modifiers for the driver, that includes the Allwinner tiled modifier, as well as a format_mod_supported callback. The callback uses both the backend and frontend helpers to indicate per-format modifier support (including for the linear modifier). Signed-off-by:
-
Paul Kocialkowski authored
This introduces a helper to check whether a frontend input format supports tiling mode. This helper is used when tiling is requested in the frontend format support helper. Only semiplanar and planar YUV formats are supported by the hardware. Signed-off-by:
-
Paul Kocialkowski authored
This introduces stride and offset configuration for the VPU tiling mode. Stride is calculated differently than it is for linear formats and an offset is calculated, for which new register definitions are introduced. Signed-off-by:
-
Paul Kocialkowski authored
This introduces the data input mode definitions for the tiled YUV mode, that are used in the input mode helper if tiling is requested. The modifier is passed to the helper from the framebuffer to determine if tiling is requested. Only semiplanar and planar YUV formats are supported for tiling mode. Signed-off-by:
-
Paul Kocialkowski authored
This introduces specific definitions for vendor Allwinner and its associated tiled format modifier. This modifier is used for the output format of the VPU, that can be imported directly with the display engine hardware supported by the sun4i-drm driver. Signed-off-by:
-
Paul Kocialkowski authored
Planar YUV formats come with 3 distinct planes, which requires configuring the frontend line stride and address registers for the third plane. Our hardware only supports the YUV planes order and in order to support formats with a YVU plane order, a helper is introduced to indicate whether to invert the address of the two chroma planes. Missing definitions for YUV411 and YUV444 input format configuration are also introduced as support is added for these formats. For the input sequence part, no configuration is required for planar YUV formats so zero is returned in that case. Signed-off-by:
-
Paul Kocialkowski authored
Semi-planar YUV formats use two distinct planes, one for luminance and one for chrominance. To add support for them, we need to configure the second line stride and buffer address registers to setup the second YUV plane. New definitions are introduced to configure the input format register for the YUV420 and YUV422 semi-planar formats. Signed-off-by:
-
Paul Kocialkowski authored
This introduces support for packed YUV formats with 4:2:2 sampling using the frontend. Definitions are introduced for the data format and pixel sequence input format register values. Signed-off-by:
-
Paul Kocialkowski authored
In prevision of adding support for YUV formats, set the YUV to RGB colorspace conversion coefficients if required and don't bypass the CSC engine when converting. The BT601 coefficients from the A33 BSP are copied over from the backend code. Because of module inter-dependency, we can't have the frontend use these coefficients from the backend directly. Signed-off-by:
-
Paul Kocialkowski authored
Both the backend and the frontend need the BT.601 CSC coefficients for YUV to RGB conversion. Since the backend has a dependency on the frontend (and not the other way round), move the coefficients there so that both can access them without having to duplicate them. Signed-off-by:
-
