- 07 Dec, 2017 5 commits
-
-
Ching Huang authored
Replace constant ARCMSR_MAX_FREECCB_NUM by variable acb->maxFreeCCB that was received from firmware. Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Ching Huang authored
Update ARCMSR_MAX_OUTSTANDING_CMD and ARCMSR_MAX_FREECCB_NUM to 1024. Signed-off-by:
-
Ching Huang authored
Add code for ACB_ADAPTER_TYPE_E to support new adapter ARC-1884. Signed-off-by:
-
Ching Huang authored
Simplify arcmsr_iop_init function. Signed-off-by:
-
Ching Huang authored
Redefine ACB_ADAPTER_TYPE_A, _B, _C, _D and subsequent changes. Signed-off-by:
-
- 05 Dec, 2017 35 commits
-
-
Bryant G. Ly authored
Where applicable, changes pr_debug, pr_info, pr_err, etc. calls to the dev_* versions. This adds the DRC index of the device to the corresponding trace statement. Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Brad Warrum <bwarrum@us.ibm.com> Signed-off-by:
-
Colin Ian King authored
Remove one extraneous level of indentation on an assignment statement. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in error message text. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in error message text. Signed-off-by:
-
Michał Mirosław authored
KERN_CONT is now required for continued printks(). Add it. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
kwmad.kim@samsung.com authored
These would be used in the future in some specific drivers. Signed-off-by:
Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by:
-
Suganath Prabu S authored
No Functional change just cleanup. Removed variable requeue_event and made function as void. Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Romain Perier authored
The PCI pool API is deprecated. This commit replaces the PCI pool old API by the appropriate function with the DMA pool API. Signed-off-by:
Romain Perier <romain.perier@gmail.com> Signed-off-by:
-
Vasyl Gomonovych authored
Remove the duplicate copies of this simple function and use an open-coded version. drivers/scsi/fnic/fnic_debugfs.c:122:11-31: WARNING opportunity for simple_open, see also structure on line 223 Generated by: coccinelle/api/simple_open.cocci Signed-off-by:
Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by:
-
Li Dongyang authored
We are testing if there is a match with the ses device in a loop by calling ses_match_to_enclosure(), which will issue scsi receive diagnostics commands to the ses device for every device on the same host. On one of our boxes with 840 disks, it takes a long time to load the driver: [root@g1b-oss06 ~]# time modprobe ses real 40m48.247s user 0m0.001s sys 0m0.196s With the patch: [root@g1b-oss06 ~]# time modprobe ses real 0m17.915s user 0m0.008s sys 0m0.053s Note that we still need to refresh page 10 when we see a new disk to create the link. Signed-off-by:
Li Dongyang <dongyang.li@anu.edu.au> Tested-by:
Jason Ozolins <jason.ozolins@hpe.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array card_types on the stack but instead make it static and constify it. Makes the object code smaller by over 110 bytes: Before: text data bss dec hex filename 25625 5752 0 31377 7a91 drivers/scsi/wd719x.o After: text data bss dec hex filename 25447 5816 0 31263 7a1f drivers/scsi/wd719x.o (gcc version 7.2.0 x86_64) Signed-off-by:
-
Arnd Bergmann authored
There is no need to go through an intermediate timespec to convert to ktime_t when we just want a simple multiplication. This gets rid of one of the few users of jiffies_to_timespec, which I hope to remove as part of the y2038 cleanup. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Dan Carpenter authored
device->scsi3addr[] is an array, not a pointer, so it can't be NULL. I've removed the check. [mkp: fixed typo] Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
James Smart authored
Update the driver version to 11.4.0.5 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
The logic for sg_seg_cnt is a bit convoluted. This patch tries to clean up a couple of areas, especially around the +2 and +1 logic. This patch: - Cleans up the lpfc_sg_seg_cnt attribute to specify a real minimum rather than making the minimum be whatever the default is. - Removes the hardcoding of +2 (for the number of elements we use in a sgl for cmd iu and rsp iu) and +1 (an additional entry to compensate for nvme's reduction of io size based on a possible partial page) logic in sg list initialization. In the case where the +1 logic is referenced in host and target io checks, use the values set in the transport template as that value was properly set. There can certainly be more done in this area and it will be addressed in combined host/target driver effort. Signed-off-by:
-
James Smart authored
During driver unload, the driver may crash due to NULL pointers. The NULL pointers were due to the driver not protecting itself sufficiently during some of the teardown paths. Additionally, the driver was not waiting for and cleanup up nvme io resources. As such, the driver wasn't making the callbacks to the transport, stalling the transports association teardown. This patch waits for io clean up before tearding down and adds checks for possible NULL pointers. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
James Smart authored
When the driver is unloading, the nvme transport could be in the process of submitting new requests, will send abort requests to terminate associations, or may make LS-related requests. The driver's abort and request entry points currently is ignorant of the unloading state and is starting the requests even though the infrastructure to complete them continues to teardown. Change the entry points for new requests to check whether unloading and if so, reject the requests. Abort routines check unloading, and if so, noop the request. An abort is noop'd as the teardown paths are already aborting/terminating the io outstanding at the time the teardown initiated. Signed-off-by:
-
James Smart authored
The driver's interaction with the host nvme transport has been incorrect for a while. The driver did not wait for the unregister callbacks (waited only 5 jiffies). Thus the driver may remove objects that may be referenced by subsequent abort commands from the transport, and the actual unregister callback was effectively a noop. This was especially problematic if the driver was unloaded. The driver now waits for the unregister callbacks, as it should, before continuing with teardown. Signed-off-by:
-
James Smart authored
The driver currently registers any remote port that has NVME support. It should only be registering target ports. Register only target ports. Signed-off-by:
-
James Smart authored
During RSCN storms, the driver does not rediscover some targets. The driver marks some RSCN as to be handled after the ones it's working on. The driver missed processing some deferred RSCN. Move where the driver checks for deferred RSCNs and initiate deferred RSCN handling if the flag was set. Also revise nport state within the RSCN confirm routine. Add some state data to a possible debug print to aid future debugging. Signed-off-by:
-
James Smart authored
pt2pt ndlp ref count prematurely goes to 0. There was reference removed that should only be removed if connected to a switch, not if in point-to-point mode. Add a mode check before the reference remove. Signed-off-by:
-
James Smart authored
The current default for async hw receive queues is 1, which presents issues under heavy load as number of queues influence the available async receive buffer limits. Raise the default to the either the current hw limit (16) or the number of hw qs configured (io channel value). Revise the attribute definition for mrq to better reflect what we do for hw queues. E.g. 0 means default to optimal (# of cpus), non-zero specifies a specific limit. Before this change, mrq=0 meant target mode was disabled. As 0 now has a different meaning, rework the if tests to use the better nvmet_support check. Signed-off-by:
-
James Smart authored
Display for lpfc/fnX/iDiag/queInfo isn't formatted perfectly. Corrected the format strings for the queue info debug messages. Signed-off-by:
-
James Smart authored
The driver does not respond to PLOGI from the direct attach target. The driver uses incorrect S_ID in CONFIG_LINK, after FLOGI completion Correct by issuing CONFIG_LINK with the correct S_ID after receiving the PLOGI from the target Signed-off-by:
-
James Smart authored
Raise the maximum NVME sg list size allowed to 256 elements. Signed-off-by:
-
James Smart authored
Performing an LS abort results in the following message being seen: 0603 Invalid CQ subtype 6: 00000300 22000002 ffff0016 d0050000 and the associated exchange is not properly freed. The code did not recognize the exchange type that was aborted, thus it was not properly handled. Correct by adding the NVME LS ELS type to the exchange types that are recognized. Signed-off-by:
-
James Smart authored
In test cases where an instance of the driver is detached and reattached, the driver will crash on reattachment. There is a compound if statement that will skip over the bar setup if the pci_resource_start call is not successful. The driver erroneously returns success to its bar setup in this scenario even though the bars aren't properly configured. Rework the offending code segment for proper initialization steps. If the pci_resource_start call fails, -ENOMEM is now returned. Sample stack: rport-5:0-10: blocked FC remote port time out: removing rport BUG: unable to handle kernel NULL pointer dereference at (null) ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] ... ... RIP: 0010:... ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] Call Trace: ... lpfc_sli4_post_sync_mbox+0x106/0x4d0 [lpfc] ... ? __alloc_pages_nodemask+0x176/0x420 ... ? __kmalloc+0x2e/0x230 ... lpfc_sli_issue_mbox_s4+0x533/0x720 [lpfc] ... ? mempool_alloc+0x69/0x170 ... ? dma_generic_alloc_coherent+0x8f/0x140 ... lpfc_sli_issue_mbox+0xf/0x20 [lpfc] ... lpfc_sli4_driver_resource_setup+0xa6f/0x1130 [lpfc] ... ? lpfc_pci_probe_one+0x23e/0x16f0 [lpfc] ... lpfc_pci_probe_one+0x445/0x16f0 [lpfc] ... local_pci_probe+0x45/0xa0 ... work_for_cpu_fn+0x14/0x20 ... process_one_work+0x17a/0x440 Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
James Smart authored
XRI_ABORTED_CQE completions were not being handled in the fast path. They were being queued and deferred to the lpfc worker thread for processing. This is an artifact of the driver design prior to moving queue processing out of the isr and into a workq element. Now that queue processing is already in a deferred context, remove this artifact and process them directly. Signed-off-by:
-
James Smart authored
Hardware queues are a fast staging area to push commands into the adapter. The adapter should drain them extremely quickly. However, under heavy io load, the host cpu is pushing commands faster than the drain rate of the adapter causing the driver to resource busy commands. Enlarge the hardware queue (wq & cq) to support a larger number of queue entries (4x the prior size) before backpressure. Enlarging the queue requires larger contiguous buffers (16k) per logical page for the hardware. This changed calling sequences that were expecting 4K page sizes that now must pass a parameter with the page sizes. It also required use of a new version of an adapter command that can vary the page size values. Signed-off-by:
-
James Smart authored
When the HBA is connected to a private loop, the driver reports FLOGI loop-open failure as functional error. This is an expected condition. Mark loop-open failure as a warning instead of error. Signed-off-by:
-
Colin Ian King authored
The pointer 'port' is being assigned but it is never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/scsi/bfa/bfad_attr.c:505:2: warning: Value stored to 'port' is never read. Signed-off-by:
-
Colin Ian King authored
Variable managed_request_id is being assigned but it is never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/scsi/aacraid/linit.c:706:5: warning: Value stored to 'managed_request_id' is never read Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc function name and comments in st.c::read_ns_show(): change us to ns to match the function name. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Correct another typo I20 to I2O. Signed-off-by:
-
Greg Kroah-Hartman authored
There is no need to #define the license of the driver, just put it in the MODULE_LICENSE() line directly as a text string. This allows tools that check that the module license matches the source code license to work properly, as there is no need to unwind the unneeded dereference, especially when the string is defined in a .h file far away from the .c file it is used in. Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Varun Prakash <varun@chelsio.com> Reported-by:
Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
