- 28 Jan, 2011 3 commits
-
-
Chuck Lever authored
On recent 2.6.38-rc kernels, connectathon basic test 6 fails on NFSv4 mounts of OpenSolaris with something like: > ./test6: readdir > ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.12' dir entry, pass 0 > ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.82' dir entry, pass 0 > ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.164' dir entry, pass 0 > ./test6: (/mnt/klimt/matisse.test) Test failed with 3 errors > basic tests failed > Tests failed, leaving /mnt/klimt mounted > [cel@matisse cthon04]$ I narrowed the problem down to nfs4_decode_dirent() reporting that the decode buffer had overflowed while decoding the entries for those missing files. verify_attr_len() assumes both it's pointer arguments reside on the same page. When these arguments point to locations on two different pages, verify_attr_len() can report false errors. This can happen now that a large NFSv4 readdir result can span pages. We have reasonably good checking in nfs4_decode_dirent() anyway, so it should be safe to simply remove the extra checking. At a guess, this was introduced by commit 6650239a, "NFS: Don't use vm_map_ram() in readdir". Cc: stable@kernel.org [2.6.37] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Make the decoding of NFSv4 directory entries slightly more efficient by: 1. Avoiding unnecessary byte swapping when checking XDR booleans, and 2. Not bumping "p" when its value will be immediately replaced by xdr_inline_decode() This commit makes nfs4_decode_dirent() consistent with similar logic in the other two decode_dirent() functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
There is no reason to be freeing the delegation cred in the rcu callback, and doing so is resulting in a lockdep complaint that rpc_credcache_lock is being called from both softirq and non-softirq contexts. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
- 26 Jan, 2011 1 commit
-
-
Andy Adamson authored
As stated in section 2.4 of RFC 5661, subsequent instances of the client need to present the same co_ownerid. Concatinate the client's IP dot address, host name, and the rpc_auth pseudoflavor to form the co_ownerid. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 Jan, 2011 10 commits
-
-
Trond Myklebust authored
If the call to nfs_wcc_update_inode() results in an attribute update, we need to ensure that the inode's attr_gencount gets bumped too, otherwise we are not protected against races with other GETATTR calls. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
What we really want to know is the ref count. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Always assign the cb_process_state nfs_client pointer so a processing error in cb_sequence after the nfs_client is found and referenced returns a non-NULL cb_process_state nfs_client and the matching nfs_put_client in nfs4_callback_compound dereferences the client. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The information required to find the nfs_client cooresponding to the incoming back channel request is contained in the NFS layer. Perform minimal checking in the RPC layer pg_authenticate method, and push more detailed checking into the NFS layer where the nfs_client can be found. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Nick Bowler <nbowler@elliptictech.com> reports: > We were just having some NFS server troubles, and my client machine > running 2.6.38-rc1+ (specifically, commit 2b1caf6e) crashed > hard (syslog output appended to this mail). > > I'm not sure what the exact timeline was or how to reproduce this, > but the server was rebooted during all this. Since I've never seen > this happen before, it is possibly a regression from previous kernel > releases. However, I recently updated my nfs-utils (on the client) to > version 1.2.3, so that might be related as well. [ BUG output redacted ] When done searching, the for_each_host loop in next_host_state() falls through and returns the final host on the host chain without bumping it's reference count. Since the host's ref count is only one at that point, releasing the host in nlm_host_rebooted() attempts to destroy the host prematurely, and therefore hits a BUG(). Likely, the original intent of the for_each_host behavior in next_host_state() was to handle the case when the host chain is empty. Searching the chain and finding no suitable host to return needs to be handled as well. Defensively restructure next_host_state() always to return NULL when the loop falls through. Introduced by commit b10e30f6 "lockd: reorganize nlm_host_rebooted". Cc: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
nfsacl_encode() allocates memory in certain cases. This of course is not guaranteed to work. Since commit 9f06c719 "SUNRPC: New xdr_streams XDR encoder API", the kernel's XDR encoders can't return a result indicating possibly a failure, so a memory allocation failure in nfsacl_encode() has become fatal (ie, the XDR code Oopses) in some cases. However, the allocated memory is a tiny fixed amount, on the order of 40-50 bytes. We can easily use a stack-allocated buffer for this, with only a wee bit of nose-holding. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up. The nfsacl_encode() and nfsacl_decode() functions return negative errno values, and each call site verifies that the returned value is not negative. Change the synopsis of both of these functions to reflect this usage. Document the synopsis and return values. Reported-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Milan Broz <mbroz@redhat.com> reports: > on today Linus' tree I get OOps if using nfs. > > server (2.6.36) exports dir: > /dir 172.16.1.0/24(rw,async,all_squash,no_subtree_check,anonuid=500,anongid=500) > > on client it is mounted in fstab > server:/dir /mnt/tst nfs rw,soft 0 0 > > and these commands OOpses it (simplified from a configure script): > > cd /dir > touch x > install x y > > [ 105.327701] ------------[ cut here ]------------ > [ 105.327979] kernel BUG at fs/nfs/nfs3xdr.c:1338! > [ 105.328075] invalid opcode: 0000 [#1] PREEMPT SMP > [ 105.328223] last sysfs file: /sys/devices/virtual/bdi/0:16/uevent > [ 105.328349] Modules linked in: usbcore dm_mod > [ 105.328553] > [ 105.328678] Pid: 3710, comm: install Not tainted 2.6.37+ #423 440BX Desktop Reference Platform/VMware Virtual Platform > [ 105.328853] EIP: 0060:[<c116c06c>] EFLAGS: 00010282 CPU: 0 > [ 105.329152] EIP is at nfs3_xdr_enc_setacl3args+0x61/0x98 > [ 105.329249] EAX: ffffffea EBX: ce941d98 ECX: 00000000 EDX: 00000004 > [ 105.329340] ESI: ce941cd0 EDI: 000000a4 EBP: ce941cc0 ESP: ce941cb4 > [ 105.329431] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 105.329525] Process install (pid: 3710, ti=ce940000 task=ced36f20 task.ti=ce940000) > [ 105.336600] Stack: > [ 105.336693] ce941cd0 ce9dc000 00000000 ce941cf8 c12ecd02 c12f43e0 c116c00b cf754158 > [ 105.336982] ce9dc004 cf754284 ce9dc004 cf7ffee8 ceff9978 ce9dc000 cf7ffee8 ce9dc000 > [ 105.337182] ce9dc000 ce941d14 c12e698d cf75412c ce941d98 cf7ffee8 cf7fff20 00000000 > [ 105.337405] Call Trace: > [ 105.337695] [<c12ecd02>] rpcauth_wrap_req+0x75/0x7f > [ 105.337806] [<c12f43e0>] ? xdr_encode_opaque+0x12/0x15 > [ 105.337898] [<c116c00b>] ? nfs3_xdr_enc_setacl3args+0x0/0x98 > [ 105.337988] [<c12e698d>] call_transmit+0x17e/0x1e8 > [ 105.338072] [<c12ec307>] __rpc_execute+0x6d/0x1a6 > [ 105.338155] [<c12ec474>] rpc_execute+0x34/0x37 > [ 105.338235] [<c12e738d>] rpc_run_task+0xb5/0xbd > [ 105.338316] [<c12e7474>] rpc_call_sync+0x3d/0x58 > [ 105.338402] [<c116d0c6>] nfs3_proc_setacls+0x18e/0x24f > [ 105.338493] [<c10b3f76>] ? __kmalloc+0x148/0x1c4 > [ 105.338579] [<c10ecd01>] ? posix_acl_alloc+0x12/0x22 > [ 105.338665] [<c116d5c8>] nfs3_proc_setacl+0xa0/0xca > [ 105.338748] [<c116d69c>] nfs3_setxattr+0x62/0x88 > [ 105.338834] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.338926] [<c116d63a>] ? nfs3_setxattr+0x0/0x88 > [ 105.339026] [<c10cfa79>] __vfs_setxattr_noperm+0x26/0x95 > [ 105.339114] [<c10cfb43>] vfs_setxattr+0x5b/0x76 > [ 105.339211] [<c10cfbfb>] setxattr+0x9d/0xc3 > [ 105.339298] [<c10a2ea8>] ? handle_pte_fault+0x258/0x5cb > [ 105.339428] [<c1091ff6>] ? __free_pages+0x1a/0x23 > [ 105.339517] [<c10498ea>] ? up_read+0x16/0x2c > [ 105.339599] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339677] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339760] [<c1025d23>] ? get_parent_ip+0xb/0x31 > [ 105.339843] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.339931] [<c10cfc72>] sys_fsetxattr+0x51/0x79 > [ 105.340014] [<c1002853>] sysenter_do_call+0x12/0x32 > [ 105.340133] Code: 2e 76 18 00 58 31 d2 8b 7f 28 f6 43 04 01 74 03 8b 53 08 6a 00 8b 46 04 6a 01 8b 0b 52 89 fa e8 85 10 f8 ff 83 c4 0c 85 c0 79 04 <0f> 0b eb fe 31 c9 f6 43 04 04 74 03 8b 4b 0c 68 00 10 00 00 8d > [ 105.350321] EIP: [<c116c06c>] nfs3_xdr_enc_setacl3args+0x61/0x98 SS:ESP 0068:ce941cb4 > [ 105.364385] ---[ end trace 01fcfe7f0f7f6e4a ]--- nfs3_xdr_enc_setacl3args() is not properly setting up the target buffer before nfsacl_encode() attempts to encode the ACL. Introduced by commit d9c407b1 "NFS: Introduce new-style XDR encoding functions for NFSv3." Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Nick Piggin reports: > I'm getting use after frees in aio code in NFS > > [ 2703.396766] Call Trace: > [ 2703.396858] [<ffffffff8100b057>] ? native_sched_clock+0x27/0x80 > [ 2703.396959] [<ffffffff8108509e>] ? put_lock_stats+0xe/0x40 > [ 2703.397058] [<ffffffff81088348>] ? lock_release_holdtime+0xa8/0x140 > [ 2703.397159] [<ffffffff8108a2a5>] lock_acquire+0x95/0x1b0 > [ 2703.397260] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397361] [<ffffffff81039701>] ? get_parent_ip+0x11/0x50 > [ 2703.397464] [<ffffffff81612a31>] _raw_spin_lock_irq+0x41/0x80 > [ 2703.397564] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397662] [<ffffffff811627db>] aio_put_req+0x2b/0x60 > [ 2703.397761] [<ffffffff811647fe>] do_io_submit+0x2be/0x7c0 > [ 2703.397895] [<ffffffff81164d0b>] sys_io_submit+0xb/0x10 > [ 2703.397995] [<ffffffff8100307b>] system_call_fastpath+0x16/0x1b > > Adding some tracing, it is due to nfs completing the request then > returning something other than -EIOCBQUEUED, so aio.c > also completes the request. To address this, prevent the NFS direct I/O engine from completing async iocbs when the forward path returns an error without starting any I/O. This fix appears to survive ^C during both "xfstest no. 208" and "fsx -Z." It's likely this bug has existed for a very long while, as we are seeing very similar symptoms in OEL 5. Copying stable. Cc: Stable <stable@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jesper Juhl authored
On Mon, 17 Jan 2011, Mi Jinlong wrote: > > > Jesper Juhl: > > strrchr() can return NULL if nothing is found. If this happens we'll > > dereference a NULL pointer in > > fs/nfs/nfs4filelayoutdev.c::decode_and_add_ds(). > > > > I tried to find some other code that guarantees that this can never > > happen but I was unsuccessful. So, unless someone else can point to some > > code that ensures this can never be a problem, I believe this patch is > > needed. > > > > While I was changing this code I also noticed that all the dprintk() > > statements, except one, start with "%s:". The one missing the ":" I added > > it to. > > Maybe another one also should be changed at decode_and_add_ds() at line 243: > > 243 printk("%s Decoded address and port %s\n", __func__, buf); > Missed that one. Thanks. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 Jan, 2011 1 commit
-
-
Fred Isaman authored
Cleanup of the allocated list entries should not call put_nfs_open_context() on each entry, as the context will always be NULL, causing an oops. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 Jan, 2011 25 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
-
Guenter Roeck authored
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
-
Oleg Nesterov authored
Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Oleg Nesterov authored
If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161008.GB693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Aurelien Jarno authored
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Aurelien Jarno authored
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1948/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Gabor Juhos authored
This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1947/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/1923/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
On the off chance that uasm ever warns about overflow, there is no way to know what the offending instruction is. Change the printks to WARNs, so we can get a nice stack trace. It has the added benefit of being much more noticeable than the short single line warning message, so is less likely to be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1905/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Octeon can use scratch registers in the TLB handlers. Octeon II can use LDX instructions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1904/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-