1. 08 Nov, 2011 1 commit
    • Wen-chien Jesse Sung's avatar
      Bluetooth: Add support for Broadcom BCM20702A0 · d13431ca
      Wen-chien Jesse Sung authored
      Since this device declares itself as vendor specific, must add
      a new entry to device ID table to support it.
      
      usb-device output of this device:
      
      T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
      D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
      P:  Vendor=413c ProdID=8197 Rev=01.12
      S:  Manufacturer=Broadcom Corp
      S:  Product=BCM20702A0
      S:  SerialNumber=D0DF9AA9C9F1
      C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
      I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
      Signed-off-by: default avatarWen-chien Jesse Sung <jesse.sung@canonical.com>
      Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
      d13431ca
  2. 07 Nov, 2011 2 commits
    • Andrzej Kaczmarek's avatar
      Bluetooth: Use miliseconds for L2CAP channel timeouts · f3f668b0
      Andrzej Kaczmarek authored
      Timers set by __set_chan_timer() should use miliseconds instead of
      jiffies. Commit 942ecc9c updated
      l2cap_set_timer() so it expects timeout to be specified in msecs
      instead of jiffies. This makes timeouts unreliable when CONFIG_HZ
      is not set to 1000.
      Signed-off-by: default avatarAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
      Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
      f3f668b0
    • Arek Lichwa's avatar
      Bluetooth: Revert: Fix L2CAP connection establishment · 4dff523a
      Arek Lichwa authored
      This reverts commit 33060542.
      The commit introduces regression when two 2.1 devices attempt
      establish rfcomm channel. Such connection is refused since there's
      a security block issue on l2cap. It means the link is unencrypted.
      
      2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
          0000: 14 00 40 00 06 00 02 00  0f 35 03 19 12 00 ff ff
      ..@......5....˙˙
          0010: 35 05 0a 00 00 ff ff 00                           5....˙˙.
      2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
      (0x13) plen 5
          handle 1 packets 1
      2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
          L2CAP(d): cid 0x0040 len 84 [psm 0]
            0000: 07 00 02 00 4f 00 4c 35  4a 35 48 09 00 00 0a 00
      ....O.L5J5H.....
            0010: 01 00 00 09 00 01 35 03  19 12 00 09 00 05 35 03
      ......5.......5.
            0020: 19 10 02 09 00 09 35 08  35 06 19 12 00 09 01 02
      ......5.5.......
            0030: 09 02 00 09 01 02 09 02  01 09 00 0a 09 02 02 09
      ................
            0040: 00 00 09 02 03 09 00 00  09 02 04 28 01 09 02 05
      ...........(....
            0050: 09 00 02 00                                       ....
      2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
      (0x01|0x0011) plen 2
          handle 1
      2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
          Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
      2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
          bdaddr 00:00:F2:6A:29:69
      2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
      (0x01|0x000b) plen 22
          bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
      2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10
          Link Key Request Reply (0x01|0x000b) ncmd 1
          status 0x00 bdaddr 00:00:F2:6A:29:69
      2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
          status 0x00 handle 1
      2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
          0000: 08 00 01 00 02 05 04 00  03 00 41 00              ..........A.
      2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
          Unknown (0x00|0x0000) status 0x00 ncmd 2
      2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
      (0x13) plen 5
          handle 1 packets 1
      2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
          L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
            Connection refused - security block
      2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
          0000: 08 00 01 00 06 06 04 00  40 00 40 00              ........@.@.
      2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
      (0x13) plen 5
          handle 1 packets 1
      2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
          L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
      2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen
      3
          handle 1 reason 0x13
          Reason: Remote User Terminated Connection
      2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
          Disconnect (0x01|0x0006) status 0x00 ncmd 1
      2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
          status 0x00 handle 1 reason 0x16
          Reason: Connection Terminated by Local Host
      Signed-off-by: default avatarArek Lichwa <arkadiusz.lichwa@tieto.com>
      Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
      4dff523a
  3. 02 Nov, 2011 16 commits
  4. 31 Oct, 2011 6 commits
  5. 30 Oct, 2011 9 commits
  6. 28 Oct, 2011 6 commits