- 22 Apr, 2019 40 commits
-
-
Niklas Söderlund authored
Later versions of the datasheet updates the reset procedure to more closely resemble the standby mode. Update the driver to enter and exit the standby mode instead of resetting the hardware before and after streaming is started and stopped. This replaces the software reset (SRST.SRST) control. While at it break out the full start and stop procedures from rcsi2_s_stream() into the existing helper functions. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Niklas Söderlund authored
The resets property will become mandatory to operate the device, list it as such. All device tree source files have always included the reset property so making it mandatory will not introduce any regressions. While at it improve the description for the clocks property. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Philipp Zabel authored
If VIDIOC_CREATE_BUFS is called with a sizeimage smaller than the queue sizeimage, fail with -EINVAL instead of correcting the size and continuing without error. This is required by v4l2-compliance. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
v4l2-compliance sets colorimetry on the output queue and then verifies that querying colorimetry on the capture queue returns the same configuration. For this to work, the encoder must allow setting context colorimetry parameters on the output queue. Signed-off-by:
-
Philipp Zabel authored
The stateful encoder API requires VIDIOC_ENUM_FRAMESIZES to be implemented. Allow enumeration of supported frame sizes for encoding. Signed-off-by:
-
Philipp Zabel authored
Return -ENOTTY when userspace tries to call VIDIOC_(TRY_)ENCODER_CMD on a decoder instance or VIDIOC_(TRY_)DECODER_CMD on an encoder instance. Signed-off-by:
-
Philipp Zabel authored
Add min number of buffers for capture (decoder) and output (encoder) controls, which are required by the stateful video decoder / encoder interface specification. Signed-off-by:
-
Philipp Zabel authored
The error return value is not written by some firmware codecs, such as MPEG-2 decode on CodaHx4. Clear the error return value before starting the picture run to avoid misinterpreting unrelated values returned by sequence initialization as error return value. Signed-off-by:
-
Philipp Zabel authored
Since levels are specified in terms of maximum values, there is no reason to filter out lower levels than the supported maximum. Signed-off-by:
-
Philipp Zabel authored
The chosen codec depends on the coded format, which is known as soon as the S_FMT call on the coded queue. This allows to use the codec in callbacks that may be called before start_streaming, such as buf_queue. Signed-off-by:
-
Hans Verkuil authored
Calling VIDIOC_DQBUF can release the core serialization lock pointed to by vb2_queue->lock if it has to wait for a new buffer to arrive. However, if userspace dup()ped the video device filehandle, then it is possible to read or call DQBUF from two filehandles at the same time. It is also possible to call REQBUFS from one filehandle while the other is waiting for a buffer. This will remove all the buffers and reallocate new ones. Removing all the buffers isn't the problem here (that's already handled correctly by DQBUF), but the reallocating part is: DQBUF isn't aware that the buffers have changed. This is fixed by setting a flag whenever the lock is released while waiting for a buffer to arrive. And checking the flag where needed so we can return -EBUSY. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Reported-by:
Syzbot <syzbot+4180ff9ca6810b06c1e9@syzkaller.appspotmail.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Dan Carpenter authored
The ctrl_check_input() function is called from pvr2_ctrl_range_check(). It's supposed to validate user supplied input and return true or false depending on whether the input is valid or not. The problem is that negative shifts or shifts greater than 31 are undefined in C. In practice with GCC they result in shift wrapping so this function returns true for some inputs which are not valid and this could result in a buffer overflow: drivers/media/usb/pvrusb2/pvrusb2-ctrl.c:205 pvr2_ctrl_get_valname() warn: uncapped user index 'names[val]' The cptr->hdw->input_allowed_mask mask is configured in pvr2_hdw_create() and the highest valid bit is BIT(4). Fixes: 7fb20fa3 ("V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availability") Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jernej Skrabec authored
Currently, MEDIA_IOC_G_TOPOLOGY ioctl on cedrus fails due to incorrect initialization order. Fix that by moving video_register_device() before v4l2_m2m_register_media_controller() and while at it, fix error path. Reported-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Alexander Potapenko authored
syzkaller reported crashes on kfree() called from vivid_vid_cap_s_selection(). This looks like a simple typo, as dev->bitmap_cap is allocated with vzalloc() throughout the file. Fixes: ef834f78 ("[media] vivid: add the video capture and output parts") Signed-off-by:
Alexander Potapenko <glider@google.com> Reported-by:
Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com> Signed-off-by:
-
Hans Verkuil authored
If a buffer is queued to a request, followed by an attempt to queue the same buffer again, then the second qbuf returns an error since the buffer is not in the DEQUEUED state anymore. However, before it gets to that check it executes the code under the 'if (!vb->prepared)' condition. This clears previously set data needed for request handling, and now querybuf will no longer report that this buffer is part of a request. Move the state check to before the 'if' and make sure to only do the state check when called from QBUF and if V4L2_BUF_FLAG_REQUEST_FD is set. Signed-off-by:
-
Maoguang Meng authored
Update referenced frame buffer's reference count when playing vp9 content which has show_existing_frame flag, and copy enough buffer data to current shown frame. Signed-off-by:
Maoguang Meng <maoguang.meng@mediatek.com> Signed-off-by:
-
Sakari Ailus authored
The driver used %d for formatting unsigned values. Use %u instead. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Bingbu Cao authored
Current ImgU driver processes and releases the parameter buffer immediately after queued from user. This does not align with other image buffers which are grouped in sets and used for the same frame. If user queues multiple parameter buffers continuously, only the last one will take effect. To make consistent buffers usage, this patch changes the parameter buffer handling and group parameter buffer with other image buffers for each frame. Each time driver will queue one more group of buffers when previous frame processed and buffers consumed by css. Signed-off-by:
Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
-
Mickael Guene authored
This V4L2 subdev driver enables STMicroelectronics MIPID02 device. Signed-off-by:
Mickael Guene <mickael.guene@st.com> Signed-off-by:
-
Mickael Guene authored
This adds documentation of device tree for MIPID02 CSI-2 to PARALLEL bridge. Reviewed-by:
-
Mickael Guene authored
This patch adds MEDIA_BUS_FMT_BGR888_3X8 used by STM MIPID02 CSI-2 to PARALLEL bridge driver when input format is MEDIA_BUS_FMT_BGR888_1X24. Signed-off-by:
-
Akinobu Mita authored
Avoid returning with mutex locked. Fixes: fa8cb644 ("[media] ov2659: Don't depend on subdev API") Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This driver returns an error if unsupported media bus pixel code is requested by VIDIOC_SUBDEV_S_FMT. But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst, Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. So select default format code and return success in that case. This is detected by v4l2-compliance. Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
-
Janusz Krzysztofik authored
Register V4L2 subdevice implemented by the driver to the V4L2 asynchronous subdevice framework. [Sakari Ailus: Remove extra call to v4l2_i2c_subdev_set_name] Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
Janusz Krzysztofik authored
In preparation for adding asynchronous subdevice support to the driver, don't acquire v4l2_clk from the driver .probe() callback as that may fail if the clock is provided by a bridge driver which may be not yet initialized. Move the v4l2_clk_get() to ov6650_video_probe() helper which is going to be converted to v4l2_subdev_internal_ops.registered() callback, executed only when the bridge driver is ready. Signed-off-by:
-
Janusz Krzysztofik authored
After removal of clock_start() from before soc_camera_init_i2c() in soc_camera_probe() by commit 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650 driver could no longer probe the sensor successfully because its clock was no longer turned on in advance. The issue was initially worked around by adding that missing clock_start() equivalent to OMAP1 camera interface driver - the only user of this sensor - but a propoer fix should be rather implemented in the sensor driver code itself. Fix the issue by inserting a delay between the clock is turned on and the sensor I2C registers are read for the first time. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Fixes: 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") Signed-off-by:
-
Hans Verkuil authored
If the application was streaming from both videoX and vbiX, and streaming from videoX was stopped, then the vbi streaming also stopped. The cause being that stop_streaming for video stopped the subdevs as well, instead of only doing that if dev->streaming_users reached 0. au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs at all when dev->streaming_users reached 0. Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Shuah Khan authored
Fix media_devnode_unregister() to clear devnode->media_dev while holding media_devnode_lock. media_devnode_register()'s cdev_add_error handling does this correctly. Signed-off-by:
-
Shuah Khan authored
Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
Shuah Khan authored
Add a new test for Media Device Allocator API. Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. This test does a series of unbind/bind tests to make sure media device is released correctly when it is no longer is use and when the last driver releases the reference. Signed-off-by:
-
Shuah Khan authored
Enable and disable source interfaces aren't consistent in enforcing how video and audio share the tuner resource. Fix these issues to enforce the following rules and allow sharing between audio and video applications. - When DVB is streaming, audio/video/vbi/s-video/composite should find the resource busy. DVB holds the tuner in exclusive mode. - When video/VBI is streaming, audio can share the tuner and vice versa. - v4l2 allows multiple applications to open video device. - Video applications call enable source multiple times during their run-time. Resource should stay locked until the last application releases it. - A shared resource should stay in shared state and locked when it is in use by audio and video. More than one video application is allowed to use the tuner as long as video streaming protocol allows such usage. Resource is released when the last video/audio application releases it. - S-Video and Composite hold the resource in exclusive mode. Signed-off-by:
-
Shuah Khan authored
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Change the ALSA driver to use the Media Controller API to share media resources with DVB, and V4L2 drivers on a AU0828 media device. The Media Controller specific initialization is done after sound card is registered. ALSA creates Media interface and entity function graph nodes for Control, Mixer, PCM Playback, and PCM Capture devices. snd_usb_hw_params() will call Media Controller enable source handler interface to request the media resource. If resource request is granted, it will release it from snd_usb_hw_free(). If resource is busy, -EBUSY is returned. Media specific cleanup is done in usb_audio_disconnect(). Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Shuah Khan authored
Move PCM_CAPTURE, PCM_PLAYBACK, and CONTROL ALSA MEDIA_INTF_T* interface types back into __KERNEL__ scope to get ready for adding ALSA support for these to the media controller. Signed-off-by:
-
Shuah Khan authored
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Change au0828 to use Media Device Allocator API to allocate media device with the parent usb struct device as the key, so it can be shared with the snd_usb_audio driver. Signed-off-by:
-
Shuah Khan authored
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Signed-off-by:
-
Hugues Fruchet authored
Do not access sd_formats[] if num_of_sd_formats is zero, ie subdev sensor didn't expose any formats. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Report overrun error only when it exceeds a given threshold. Signed-off-by:
-
Hugues Fruchet authored
Revisit and add some error messages. Signed-off-by:
-
Colin Ian King authored
There are several places where a break statement occurs before a following break statement; these are unnecessary and can be removed to clean up the code a little. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Yunfei Dong authored
Enlarge the plane number to support more complex case and add the support for fmt change case. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
