- 12 Aug, 2016 7 commits
-
-
Steffen Maier authored
Since commit a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") HBA records no longer contain WWPN, D_ID, or LUN to reduce duplicate information which is already in REC records. In contrast to "regular" target ports, we don't use recovery to open WKA ports such as directory/nameserver, so we don't get REC records. Therefore, introduce pseudo REC running records without any actual recovery action but including D_ID of WKA port on open/close. Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Steffen Maier authored
bring back commit d21e9daa ("[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace") which was lost with commit ae0904f6 ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Signed-off-by:
-
Steffen Maier authored
While retaining the actual filtering according to trace level, the following commits started to write such filtered records with a hardcoded record level of 1 instead of the actual record level: commit 250a1352 ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.") commit a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Now we can distinguish written records again for offline level filtering. Signed-off-by:
-
Steffen Maier authored
On a successful end of reopen port forced, zfcp_erp_strategy_followup_success() re-uses the port erp_action and the subsequent zfcp_erp_action_cleanup() now sees ZFCP_ERP_SUCCEEDED with erp_action->action==ZFCP_ERP_ACTION_REOPEN_PORT instead of ZFCP_ERP_ACTION_REOPEN_PORT_FORCED but must not perform zfcp_scsi_schedule_rport_register(). We can detect this because the fresh port reopen erp_action is in its very first step ZFCP_ERP_STEP_UNINITIALIZED. Otherwise this opens a time window with unblocked rport (until the followup port reopen recovery would block it again). If a scsi_cmnd timeout occurs during this time window fc_timed_out() cannot work as desired and such command would indeed time out and trigger scsi_eh. This prevents a clean and timely path failover. This should not happen if the path issue can be recovered on FC transport layer such as path issues involving RSCNs. Also, unnecessary and repeated DID_IMM_RETRY for pending and undesired new requests occur because internally zfcp still has its zfcp_port blocked. As follow-on errors with scsi_eh, it can cause, in the worst case, permanently lost paths due to one of: sd <scsidev>: [<scsidisk>] Medium access timeout failure. Offlining disk! sd <scsidev>: Device offlined - not ready after error recovery For fix validation and to aid future debugging with other recoveries we now also trace (un)blocking of rports. Signed-off-by:
-
Steffen Maier authored
In the hardware data router case, introduced with kernel 3.2 commit 86a9668a ("[SCSI] zfcp: support for hardware data router") the ELS/GS request&response length needs to be initialized as in the chained SBAL case. Otherwise, the FCP channel rejects ELS requests with FSF_REQUEST_SIZE_TOO_LARGE. Such ELS requests can be issued by user space through BSG / HBA API, or zfcp itself uses ADISC ELS for remote port link test on RSCN. The latter can cause a short path outage due to unnecessary remote target port recovery because the always failing ADISC cannot detect extremely short path interruptions beyond the local FCP channel. Below example is decoded with zfcpdbf from s390-tools: Timestamp : ... Area : SAN Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : zfcp_dbf_san_req+0408 Record id : 1 Tag : fssels1 Request id : 0x<reqid> Destination ID : 0x00<target d_id> Payload info : 52000000 00000000 <our wwpn > [ADISC] <our wwnn > 00<s_id> 00000000 00000000 00000000 00000000 00000000 Timestamp : ... Area : HBA Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : zfcp_dbf_hba_fsf_res+0740 Record id : 1 Tag : fs_ferr Request id : 0x<reqid> Request status : 0x00000010 FSF cmnd : 0x0000000b [FSF_QTCB_SEND_ELS] FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000061 [FSF_REQUEST_SIZE_TOO_LARGE] FSF stat qual : 00000000 00000000 00000000 00000000 Prot stat : 0x00000100 Prot stat qual : 00000000 00000000 00000000 00000000 Signed-off-by:
-
Steffen Maier authored
For an NPIV-enabled FCP device, zfcp can erroneously show "NPort (fabric via point-to-point)" instead of "NPIV VPORT" for the port_type sysfs attribute of the corresponding fc_host. s390-tools that can be affected are dbginfo.sh and ziomon. zfcp_fsf_exchange_config_evaluate() ignores fsf_qtcb_bottom_config.connection_features indicating NPIV and only sets fc_host_port_type to FC_PORTTYPE_NPORT if fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC. Only the independent zfcp_fsf_exchange_port_evaluate() evaluates connection_features to overwrite fc_host_port_type to FC_PORTTYPE_NPIV in case of NPIV. Code was introduced with upstream kernel 2.6.30 commit 0282985d ("[SCSI] zfcp: Report fc_host_port_type as NPIV"). This works during FCP device recovery (such as set online) because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by FSF_QTCB_EXCHANGE_PORT_DATA in sequence. However, the zfcp-specific scsi host sysfs attributes "requests", "megabytes", or "seconds_active" trigger only zfcp_fsf_exchange_config_evaluate() resetting fc_host port_type to FC_PORTTYPE_NPORT despite NPIV. The zfcp-specific scsi host sysfs attribute "utilization" triggers only zfcp_fsf_exchange_port_evaluate() correcting the fc_host port_type again in case of NPIV. Evaluate fsf_qtcb_bottom_config.connection_features in zfcp_fsf_exchange_config_evaluate() where it belongs to. Signed-off-by:
-
Kevin Barnett authored
This initial commit contains Microsemi's smartpqi module. [mkp: Minor tweaks to apply to 4.9/scsi-queue] Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
- 09 Aug, 2016 6 commits
-
-
Dan Carpenter authored
The "if (test_bit(UNLOADING..." line was indented one tab more than it should have been. There was an extra parenthesis around the qla2x00_reset_active() function call. I lined up the conditions a bit so that it shows how they group together. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Johannes Thumshirn authored
In _scsih_io_done() we test if the ioc->logging_level does _not_ have the MPT_DEBUG_REPLY bit set and if it hasn't we print the debug messages. This unfortunately is the wrong way around. Note, the actual bug is older than af009411 but this commit removed the CONFIG_SCSI_MPT3SAS_LOGGING Kconfig option which hid the bug. Fixes: af009411 'mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from Kconfig' Signed-off-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
-
Calvin Owens authored
Trivial non-functional changes for a couple annoying things: 1) Functions local to files are not declared static, which is frustrating when reading the code because it's non-obvious at first glance what's actually called from other files. 2) Set-but-unused variables abound, presumably to mask -Wunused-result errors in the past. None of these are flagged today though (with one exception noted below), so remove them. Fixing (2) exposed the fact that we improperly ignore the return value of scsi_device_reprobe() in _scsih_reprobe_lun(). Fixing the calling code to deal with the potential error is non-trivial, so for now just WARN(). Signed-off-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
-
Calvin Owens authored
With the exception of a single call to wait_for_doorbell_int(), all this conditional sleeping code is dead. So delete it. Signed-off-by:
-
Calvin Owens authored
This flag that conditionally acquires the mutex is confusing and prone to bugginess: refactor it into two separate function calls, and make the unlocked one complain if it's called outside the mutex. Signed-off-by:
-
Calvin Owens authored
We blindly trust the hardware to give us NUL-terminated strings, which is a bad idea because it doesn't always do that. For example: [ 481.184784] mpt3sas_cm0: enclosure level(0x0000), connector name( \x3) In this case, connector_name is four spaces. We got lucky here because the 2nd byte beyond our character array happens to be a NUL. Fix this by explicitly writing '\0' to the end of the string to ensure we don't run off the edge of the world in printk(). Signed-off-by:
-
- 08 Aug, 2016 1 commit
-
-
Linus Torvalds authored
-
- 07 Aug, 2016 10 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
-
Jens Axboe authored
Since commit 63a4cc24, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32 ("target: use bio op accessors") Signed-off-by:
-
Jens Axboe authored
Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: -
Jens Axboe authored
Commit abf54548 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "Three fixes for the docs build, including removing an annoying warning on 'make help' if sphinx isn't present" * tag 'doc-4.8-fixes' of git://git.lwn.net/linux: DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1 Documenation: update cgroup's document path Documentation/sphinx: do not warn about missing tools in 'make help'
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_miscLinus Torvalds authored
Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API
-
Eryu Guan authored
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller
-
- 06 Aug, 2016 16 commits
-
-
Linus Torvalds authored
Merge tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull more xfs updates from Dave Chinner: "This is the second part of the XFS updates for this merge cycle, and contains the new reverse block mapping feature for XFS. Reverse mapping allows us to track the owner of a specific block on disk precisely. It is implemented as a set of btrees (one per allocation group) that track the owners of allocated extents. Effectively it is a "used space tree" that is updated when we allocate or free extents. i.e. it is coherent with the free space btrees we already maintain and never overlaps with them. This reverse mapping infrastructure is the building block of several upcoming features - reflink, copy-on-write data, dedupe, online metadata and data scrubbing, highly accurate bad sector/data loss reporting to users, and significantly improved reconstruction of damaged and corrupted filesystems. There's a lot of new stuff coming along in the next couple of cycles,a nd it all builds in the rmap infrastructure. As such, it's a huge chunk of new code with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time kernel with this code in it is released. The new rmap enabled code regresses 3 xfstests - all are ENOSPC related corner cases, one of which Darrick posted a fix for a few hours ago. The other two are fixed by infrastructure that is part of the upcoming reflink patchset. This new ENOSPC infrastructure requires a on-disk format tweak required to keep mount times in check - we need to keep an on-disk count of allocated rmapbt blocks so we don't have to scan the entire btrees at mount time to count them. This is currently being tested and will be part of the fixes sent in the next week or two so users will not be exposed to this change" * tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits) xfs: move (and rename) the deferred bmap-free tracepoints xfs: collapse single use static functions xfs: remove unnecessary parentheses from log redo item recovery functions xfs: remove the extents array from the rmap update done log item xfs: in btree_lshift, only allocate temporary cursor when needed xfs: remove unnecesary lshift/rshift key initialization xfs: remove the get*keys and update_keys btree ops pointers xfs: enable the rmap btree functionality xfs: don't update rmapbt when fixing agfl xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled xfs: add rmap btree block detection to log recovery xfs: add rmap btree geometry feature flag xfs: propagate bmap updates to rmapbt xfs: enable the xfs_defer mechanism to process rmaps to update xfs: log rmap intent items xfs: create rmap update intent log items xfs: add rmap btree insert and delete helpers xfs: convert unwritten status of reverse mappings xfs: remove an extent from the rmap btree xfs: add an extent to the rmap btree ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull mailcap fixlets from Mauro Carvalho Chehab: "A small fixup for my and Shuah's entries in .mailcap. Basically, those entries were with a syntax that makes get_maintainer.pl to do the wrong thing" * tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: .mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/vhost updates from Michael Tsirkin: - new vsock device support in host and guest - platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - misc fixes and cleanups. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: VSOCK: Use kvfree() vhost: split out vringh Kconfig vhost: detect 32 bit integer wrap around vhost: new device IOTLB API vhost: drop vringh dependency vhost: convert pre sorted vhost memory array to interval tree vhost: introduce vhost memory accessors VSOCK: Add Makefile and Kconfig VSOCK: Introduce vhost_vsock.ko VSOCK: Introduce virtio_transport.ko VSOCK: Introduce virtio_vsock_common.ko VSOCK: defer sock removal to transports VSOCK: transport-specific vsock_transport functions vhost: drop vringh dependency vop: pull in vhost Kconfig virtio: new feature to detect IOMMU device quirk balloon: check the number of available pages in leak balloon vhost: lockless enqueuing vhost: simplify work flushing
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Paolo Bonzini: - ARM bugfix and MSI injection support - x86 nested virt tweak and OOPS fix - Simplify pvclock code (vdso bits acked by Andy Lutomirski). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: nvmx: mark ept single context invalidation as supported nvmx: remove comment about missing nested vpid support KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off KVM: documentation: fix KVM_CAP_X2APIC_API information x86: vdso: use __pvclock_read_cycles pvclock: introduce seqcount-like API arm64: KVM: Set cpsr before spsr on fault injection KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype KVM: arm/arm64: Enable MSI routing KVM: arm/arm64: Enable irqchip routing KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header KVM: irqchip: Convey devid to kvm_set_msi KVM: Add devid in kvm_kernel_irq_routing_entry KVM: api: Pass the devid in the msi routing entry
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "Mostly tooling fixes and some late tooling updates, plus two perf related printk message fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests bpf: Use SyS_epoll_wait alias perf tests: objdump output can contain multi byte chunks perf record: Add --sample-cpu option perf hists: Introduce output_resort_cb method perf tools: Move config/Makefile into Makefile.config perf tests: Add test for bitmap_scnprintf function tools lib: Add bitmap_and function tools lib: Add bitmap_scnprintf function tools lib: Add bitmap_alloc function tools lib traceevent: Ignore generated library files perf tools: Fix build failure on perl script context perf/core: Change log level for duration warning to KERN_INFO perf annotate: Plug filename string leak perf annotate: Introduce strerror for handling symbol__disassemble() errors perf annotate: Rename symbol__annotate() to symbol__disassemble() perf/x86: Modify error message in virtualized environment perf target: str_error_r() always returns the buffer it receives perf annotate: Use pipe + fork instead of popen perf evsel: Introduce constructor for cycles event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes and a cleanup-fix, to the syscall entry code and to ptrace" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace x86/ptrace: Stop setting TS_COMPAT in ptrace code x86/vdso: Error out if the vDSO isn't a valid DSO
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "These changes improve device tree support (including builtin DTB), add support for the J-Core J2 processor, an open source synthesizable reimplementation of the SH-2 ISA, resolve a longstanding sigcontext ABI mismatch issue, and fix various bugs including nommu-specific issues and minor regressions introduced in 4.6. The J-Core arch support is included here but to be usable it needs drivers that are waiting on approval/inclusion from their subsystem maintainers" * tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits) sh: add device tree source for J2 FPGA on Mimas v2 board sh: add defconfig for J-Core J2 sh: use common clock framework with device tree boards sh: system call wire up sh: Delete unnecessary checks before the function call "mempool_destroy" sh: do not perform IPI-based cache flush except on boards that need it sh: add SMP support for J2 sh: SMP support for SH2 entry.S sh: add working futex atomic ops on userspace addresses for smp sh: add J2 atomics using the cas.l instruction sh: add AT_HWCAP flag for J-Core cas.l instruction sh: add support for J-Core J2 processor sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE sh: allow clocksource drivers to register sched_clock backends sh: make heartbeat driver explicitly non-modular sh: make board-secureedge5410 explicitly non-modular sh: make mm/asids-debugfs explicitly non-modular sh: make time.c explicitly non-modular sh: fix futex/robust_list on nommu models sh: disable aliased page logic on NOMMU models ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: - fix HugeTLB leak due to CoW and PTE_RDONLY mismatch - avoid accessing unmapped FDT fields when checking validity - correctly account for vDSO AUX entry in ARCH_DLINFO - fix kallsyms with absolute expressions in linker script - kill unnecessary symbol-based relocs in vmlinux * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix copy-on-write referencing in HugeTLB arm64: mm: avoid fdt_check_header() before the FDT is fully mapped arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
-
Linus Torvalds authored
Merge tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the ntb_perf and ntb_pingpong for increased debugability. Also, modification to the ntb_transport layer to increase/decrease the number of transport entries depending on the ring size" * tag 'ntb-4.8' of git://github.com/jonmason/ntb: NTB: ntb_hw_intel: use local variable pdev NTB: ntb_hw_intel: show BAR size in debugfs info ntb_test: Add a selftest script for the NTB subsystem ntb_perf: clear link_is_up flag when the link goes down. ntb_pingpong: Add a debugfs file to get the ping count ntb_tool: Add link status and files to debugfs ntb_tool: Postpone memory window initialization for the user ntb_perf: Wait for link before running test ntb_perf: Return results by reading the run file ntb_perf: Improve thread handling to increase robustness ntb_perf: Schedule based on time not on performance ntb_transport: Check the number of spads the hardware supports ntb_tool: Add memory window debug support ntb_perf: Allow limiting the size of the memory windows NTB: allocate number transport entries depending on size of ring size ntb_tool: BUG: Ensure the buffer size is large enough to return all spads ntb_tool: Fix infinite loop bug when writing spad/peer_spad file
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: "Fixes for pstore ramoops driver to catch bad kfree() and to use better DT bindings" * tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ramoops: use persistent_ram_free() instead of kfree() for freeing prz ramoops: use DT reserved-memory bindings
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is seven basic fixes (plus one MAINTAINER update) which came in close to the merge window" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ipr: Fix error return code in ipr_probe_ioa() fcoe: add missing destroy_workqueue() on error in fcoe_init() lpfc: Fix possible NULL pointer dereference fcoe: Use default VLAN for FIP VLAN discovery ipr: Wait to do async scan until scsi host is initialized MAINTAINERS: Update cxlflash maintainers cxlflash: Verify problem state area is mapped before notifying shutdown lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - a stable dm-flakey fix to error read IO during the 'down_interval' - a DM core suspend fix to establish the SUSPENDED flag before dropping the SUSPENDING flag - a blk-mq request-based DM (dm-mq) dm_stop_queue() fix to properly stop the blk-mq hw_queues (and cancel pending requeue work); also set/clear QUEUE_FLAG_STOPPED when stopping/starting the dm-mq request_queue. - a DM multipath fix to harden locking of in-core state flags in the face of concurrent access while handling path failures under heavy IO. - a few small DM raid fixes to edge cases caught with further testing. * tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix use of wrong status char during resynchronization dm raid: constructor fails on non-zero incompat_features dm raid: fix processing of max_recovery_rate constructor flag dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING dm rq: fix the starting and stopping of blk-mq queues dm mpath: add locking to multipath_resume and must_push_back dm flakey: error READ bios during the down_interval
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Here's the second round of block updates for this merge window. It's a mix of fixes for changes that went in previously in this round, and fixes in general. This pull request contains: - Fixes for loop from Christoph - A bdi vs gendisk lifetime fix from Dan, worth two cookies. - A blk-mq timeout fix, when on frozen queues. From Gabriel. - Writeback fix from Jan, ensuring that __writeback_single_inode() does the right thing. - Fix for bio->bi_rw usage in f2fs from me. - Error path deadlock fix in blk-mq sysfs registration from me. - Floppy O_ACCMODE fix from Jiri. - Fix to the new bio op methods from Mike. One more followup will be coming here, ensuring that we don't propagate the block types outside of block. That, and a rename of bio->bi_rw is coming right after -rc1 is cut. - Various little fixes" * 'for-linus' of git://git.kernel.dk/linux-block: mm/block: convert rw_page users to bio op use loop: make do_req_filebacked more robust loop: don't try to use AIO for discards blk-mq: fix deadlock in blk_mq_register_disk() error path Include: blkdev: Removed duplicate 'struct request;' declaration. Fixup direct bi_rw modifiers block: fix bdi vs gendisk lifetime mismatch blk-mq: Allow timeouts to run while queue is freezing nbd: fix race in ioctl block: fix use-after-free in seq file f2fs: drop bio->bi_rw manual assignment block: add missing group association in bio-cloning functions blkcg: kill unused field nr_undestroyed_grps writeback: Write dirty times for WB_SYNC_ALL writeback floppy: fix open(O_ACCMODE) for ioctl-only open
-
