- 31 Jan, 2013 3 commits
-
-
Fenghua Yu authored
Remove static declaration in have_cpuid_p() to make it a global function. The function will be called in early loading microcode. Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1356075872-3054-4-git-send-email-fenghua.yu@intel.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com>
-
Fenghua Yu authored
Define some functions and macros that will be used in early loading ucode. Some of them are moved from microcode_intel.c driver in order to be called in early boot phase before module can be called. Signed-off-by:
-
Fenghua Yu authored
Documenation for early loading microcode methodology. Signed-off-by:
-
- 30 Jan, 2013 11 commits
-
-
Yinghai Lu authored
Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by:Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.orgReviewed-and-tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by:
-
Yinghai Lu authored
We don't need to panic in some case, like for swiotlb preallocating. Signed-off-by:
-
Yinghai Lu authored
We should set mappings only for usable memory ranges under max_pfn Otherwise causes same problem that is fixed by x86, mm: Only direct map addresses that are marked as E820_RAM Make it only map range in pfn_mapped array. Signed-off-by:
-
Yinghai Lu authored
HPA said, we should not have RW and +x set at the time. for kernel layout: [ 0.000000] Kernel Layout: [ 0.000000] .text: [0x01000000-0x021434f8] [ 0.000000] .rodata: [0x02200000-0x02a13fff] [ 0.000000] .data: [0x02c00000-0x02dc763f] [ 0.000000] .init: [0x02dc9000-0x0312cfff] [ 0.000000] .bss: [0x0313b000-0x03dd6fff] [ 0.000000] .brk: [0x03dd7000-0x03dfffff] before the patch, we have ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff82200000 18M ro PSE GLB x pmd 0xffffffff82200000-0xffffffff82c00000 10M ro PSE GLB NX pmd 0xffffffff82c00000-0xffffffff82dc9000 1828K RW GLB x pte 0xffffffff82dc9000-0xffffffff82e00000 220K RW GLB NX pte 0xffffffff82e00000-0xffffffff83000000 2M RW PSE GLB NX pmd 0xffffffff83000000-0xffffffff8313a000 1256K RW GLB NX pte 0xffffffff8313a000-0xffffffff83200000 792K RW GLB x pte 0xffffffff83200000-0xffffffff83e00000 12M RW PSE GLB x pmd 0xffffffff83e00000-0xffffffffa0000000 450M pmd after patch,, we get ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff82200000 18M ro PSE GLB x pmd 0xffffffff82200000-0xffffffff82c00000 10M ro PSE GLB NX pmd 0xffffffff82c00000-0xffffffff82e00000 2M RW GLB NX pte 0xffffffff82e00000-0xffffffff83000000 2M RW PSE GLB NX pmd 0xffffffff83000000-0xffffffff83200000 2M RW GLB NX pte 0xffffffff83200000-0xffffffff83e00000 12M RW PSE GLB NX pmd 0xffffffff83e00000-0xffffffffa0000000 450M pmd so data, bss, brk get NX ... Signed-off-by:
-
Yinghai Lu authored
They are the same, and we could move them out from head32/64.c to setup.c. We are using memblock, and it could handle overlapping properly, so we don't need to reserve some at first to hold the location, and just need to make sure we reserve them before we are using memblock to find free mem to use. Signed-off-by:
-
Yinghai Lu authored
During kdump kernel's booting stage, it need to find low ram for swiotlb buffer when system does not support intel iommu/dmar remapping. kexed-tools is appending memmap=exactmap and range from /proc/iomem with "Crash kernel", and that range is above 4G for 64bit after boot protocol 2.12. We need to add another range in /proc/iomem like "Crash kernel low", so kexec-tools could find that info and append to kdump kernel command line. Try to reserve some under 4G if the normal "Crash kernel" is above 4G. User could specify the size with crashkernel_low=XX[KMG]. -v2: fix warning that is found by Fengguang's test robot. -v3: move out get_mem_size change to another patch, to solve compiling warning that is found by Borislav Petkov <bp@alien8.de> -v4: user must specify crashkernel_low if system does not support intel or amd iommu. Signed-off-by: -
Yinghai Lu authored
Now kexeced kernel/ramdisk could be above 4g, so remove 896 limit for 64bit. Signed-off-by:
-
Yinghai Lu authored
Use it to get mem size under the limit_pfn. to replace local version in x86 reserved_initrd. -v2: remove not needed cast that is pointed out by HPA. Signed-off-by:
-
Yinghai Lu authored
That is for bootloaders. setup_data is in setup_header, and bootloader is copying that from bzImage. So for old bootloader should keep that as 0 already. old kexec-tools till now for elf image set setup_data to 0, so it is ok. Signed-off-by:
-
Yinghai Lu authored
Now 64bit entry is fixed on 0x200, can not be changed anymore. Update the comments to reflect that. Also put info about it in boot.txt -v2: fix some grammar error Signed-off-by:
-
Yinghai Lu authored
xloadflags bit 1 indicates that we can load the kernel and all data structures above 4G; it is set if kernel is relocatable and 64bit. bootloader will check if xloadflags bit 1 is set to decide if it could load ramdisk and kernel high above 4G. bootloader will fill value to ext_ramdisk_image/size for high 32bits when it load ramdisk above 4G. kernel use get_ramdisk_image/size to use ext_ramdisk_image/size to get right positon for ramdisk. Signed-off-by:
-
- 29 Jan, 2013 24 commits
-
-
Yinghai Lu authored
We should set mappings only for usable memory ranges under max_pfn Otherwise causes same problem that is fixed by x86, mm: Only direct map addresses that are marked as E820_RAM This patch exposes pfn_mapped array, and only sets ident mapping for ranges in that array. This patch relies on new kernel_ident_mapping_init that could handle existing pgd/pud between different calls. Signed-off-by:
-
Yinghai Lu authored
Now ident_mapping_init is checking if pgd/pud is present for every 2M, so several 2Ms are in same PUD, it will keep checking if pud is there with same pud. init_level4_page just does not check existing pgd/pud. We could use generic mapping_init with different settings in info to replace those two local grown version functions. Signed-off-by:
-
Yinghai Lu authored
When first kernel is booted with memmap= or mem= to limit max_pfn. kexec can load second kernel above that max_pfn. We need to set ident mapping for whole image in this case instead of just for first 2M. Signed-off-by:
-
Yinghai Lu authored
Now 64bit kernel supports more than 1T ram and kexec tools could find buffer above 1T, remove that obsolete limitation. and use MAXMEM instead. Tested on system with more than 1024G ram. Signed-off-by:
-
Yinghai Lu authored
commit 08da5a2c x86_64: Early segment setup for VT sets up LDT and TR into a valid state in order to speed up boot decompression under VT. Those code are put in code64, and it is using GDT that is only loaded from code32 path. That breaks booting with 64bit bootloader that does not go through code32 path and jump to startup_64 directly, and it has different GDT. Move those lines into code32 after their GDT is loaded. Signed-off-by:
-
Yinghai Lu authored
We need to move some code to 32bit section in following patch: x86, boot: Move lldt/ltr out of 64bit code section but that will push startup_64 down from 0x200. According to hpa, we can not change startup_64 position and that is an ABI. We could move function verify_cpu and no_longmode down, because verify_cpu is used via function call and no_longmode will not return, then we don't need to add extra code for jumping back. Signed-off-by:
-
Yinghai Lu authored
boot/compressed/misc.c is used for bzImage in 64bit and 32bit, and cmd_line_ptr could point to buffer that is above 4g, cmd_line_ptr should be 64bit otherwise high 32bit will be capped out. So need to change data type to unsigned long, that will be 64bit get correct address of command line buffer. And it is still ok with 32bit bzImage, because unsigned long on 32bit kernel is still 32bit. Signed-off-by:
-
Yinghai Lu authored
cmdline.c::__cmdline_find_option... are shared between 16-bit setup code and 32/64 bit decompressor code. for 32/64 only path via kexec, we should not check if ptr is less 1M. as those cmdline could be put above 1M, or even 4G. Move out accessible checking out of __cmdline_find_option() So decompressor in misc.c can parse cmdline correctly. Signed-off-by:
-
Yinghai Lu authored
Add an accessor function for the command line address. Later we will add support for holding a 64-bit address via ext_cmd_line_ptr. Signed-off-by:
-
Yinghai Lu authored
There are several places to find ramdisk information early for reserving and relocating. Use accessor functions to make code more readable and consistent. Later will add ext_ramdisk_image/size in those functions to support loading ramdisk above 4g. Signed-off-by:
-
Yinghai Lu authored
They are the same, could move them out from head32/64.c to setup.c. We are using memblock, and it could handle overlapping properly, so we don't need to reserve some at first to hold the location, and just need to make sure we reserve them before we are using memblock to find free mem to use. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Yinghai Lu authored
We are not having max_pfn_mapped set correctly until init_memory_mapping. So don't print its initial value for 64bit Also need to use KERNEL_IMAGE_SIZE directly for highmap cleanup. -v2: update comments about max_pfn_mapped according to Stefano Stabellini. Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Yinghai Lu authored
We only map a single 2 MiB page per #PF, even though we should be able to do this a full gigabyte at a time with no additional memory cost. This is a workaround for a broken AMD reference BIOS (and its derivatives in shipping system) which maps a large chunk of memory as WB in the MTRR system but will #MC if the processor wanders off and tries to prefetch that memory, which can happen any time the memory is mapped in the TLB. Signed-off-by:
-
H. Peter Anvin authored
Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: -
Yinghai Lu authored
After we switch to use #PF handler help to set page table, init_level4_pgt will only have entries set after init_mem_mapping(). We need to move copying init_level4_pgt to trampoline_pgd after that. So split reserve and setup, and move the setup after init_mem_mapping() Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by:
-
Yinghai Lu authored
with #PF handler way to set early page table, level3_ident will go away with 64bit native path. So just use entries in init_level4_pgt to set them in trampoline_pgd. Signed-off-by:
-
Yinghai Lu authored
We want to support struct boot_params (formerly known as the zero-page, or real-mode data) above the 4 GiB mark. We will have #PF handler to set page table for not accessible ram early, but want to limit it before x86_64_start_reservations to limit the code change to native path only. Also we will need the ramdisk info in struct boot_params to access the microcode blob in ramdisk in x86_64_start_kernel, so copy struct boot_params early makes it accessing ramdisk info simple. Signed-off-by:
-
Yinghai Lu authored
It is simple version for kernel_physical_mapping_init. it will work to build one page table that will be used later. Use mapping_info to control 1. alloc_pg_page method 2. if PMD is EXEC, 3. if pgd is with kernel low mapping or ident mapping. Will use to replace some local versions in kexec, hibernation and etc. Signed-off-by: -
Yinghai Lu authored
Trampoline code is executed by APs with kernel low mapping on 64bit. We need to set trampoline code to EXEC early before we boot APs. Found the problem after switching to #PF handler set page table, and we do not set initial kernel low mapping with EXEC anymore in arch/x86/kernel/head_64.S. Change to use early_initcall instead that will make sure trampoline will have EXEC set. -v2: Merge two comments according to Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Yinghai Lu authored
Just like the way we calculate next for pud and pmd, aka round down and add size. Also, do not do boundary-checking with 'next', and just pass 'end' down to phys_pud_init() instead. Because the loop in phys_pud_init() stops at PTRS_PER_PUD and thus can handle a possibly bigger 'end' properly. Signed-off-by:
-
Yinghai Lu authored
Separate out the reservation of the kernel static memory areas into a separate function. Also add support for case when memmap=xxM$yyM is used without exactmap. Need to remove reserved range at first before we add E820_RAM range, otherwise added E820_RAM range will be ignored. Signed-off-by:
-
Yinghai Lu authored
During debugging loading kernel above 4G, found that one page is not used in pre-allocated BRK area for early page allocation. pgt_buf_top is address that can not be used, so should check if that new end is above that top, otherwise last page will not be used. Fix that checking and also add print out for allocation from pre-allocated BRK area to catch possible bugs later. But after we get back that page for pgt, it tiggers one bug in pgt allocation with xen: We need to avoid to use page as pgt to map range that is overlapping with that pgt page. Add checking about overlapping, when it happens, use memblock allocation instead. That fixes crash on Xen PV guest with 2G that Stefan found. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by:
-
H. Peter Anvin authored
Coming patches to x86/mm2 require the changes and advanced baseline in x86/boot. Resolved Conflicts: arch/x86/kernel/setup.c mm/nobootmem.c Signed-off-by: -
H. Peter Anvin authored
Use the new sentinel field to detect bootloaders which fail to follow protocol and don't initialize fields in struct boot_params that they do not explicitly initialize to zero. Based on an original patch and research by Yinghai Lu. Changed by hpa to be invoked both in the decompression path and in the kernel proper; the latter for the case where a bootloader takes over decompression. Originally-by:
-
- 27 Jan, 2013 2 commits
-
-
H. Peter Anvin authored
Define the 2.12 bzImage boot protocol: add xloadflags and additional fields to allow the command line, initramfs and struct boot_params to live above the 4 GiB mark. The xloadflags now communicates if this is a 64-bit kernel with the legacy 64-bit entry point and which of the EFI handover entry points are supported. Avoid adding new read flags to loadflags because of claimed bootloaders testing the whole byte for == 1 to determine bzImageness at least until the issue can be researched further. This is based on patches by Yinghai Lu and David Woodhouse. Originally-by:
David Woodhouse <dwmw2@infradead.org> Acked-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Cong Ding authored
The opened file should be closed. Signed-off-by:
Cong Ding <dinggnu@gmail.com> Cc: Kusanagi Kouichi <slash@ac.auone-net.jp> Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1358183628-27784-1-git-send-email-dinggnu@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
