into nuts.ninka.net:/disk1/davem/BK/net-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

The "irq_vector[]" array is indexed by the sum of all RTEs in all I/O
APICs, and is not necessarily limited by the x86 CPU irq vector inputs.

In fact, the irq vector index would overflow on big machines with lots
of IO APIC's, causing the boot to fail.

So grow the array for the big SMP boxes, keeping the default the same as
before (and shrink the vector entry size down to a 8-bit value, since
that's the size of the actual CPU vector entry).

into redhat.com:/spare/repo/libata-2.5-merge

Intel ICH5 (production)
ServerWorks / Apple K2 (beta)
VIA (beta)
Silicon Image 3112 (broken!)
Various Promise (alpha/beta)

into home.osdl.org:/home/torvalds/v2.5/linux

Patch from Alexander Schulz

This patch adds the define for PCIMEM_BASE so that the shark kernel
compiles again.

Patch from Dave Jiang

The fix allows IOP321 based platforms to boot all the way instead of
blank screen after "starting kernel...".  Inherited from Deepak's
earlier patch. 

CMD640 driver also supports VLB version of the chipset, therefore fix
drivers/ide/Makefile to include pci/ subdir even if CONFIG_BLK_DEV_IDEPCI=n.

 - remove cruft, memset() i2c-client structures in tda9840, tea6420,
    tea6415c driver, otherwise i2c_register()/kobject() segfaults later on

 - remove cruft, add I2C_ADAP_CLASS_TV_ANALOG identifier for analog tv
   i2c handler

 - DVB networking uses big endian crc32, so change all occurences of
   crc32_le to crc32_be
 - fix usage of firmware location Kconfig option in tda1004x frontend
   driver
 - add missing VBI line decoding initialization to saa7113 code for
   av7110 driver
 - make av7110 firmware static and *not* __initdata, so recover_arm()
   can work in case the driver is compiled in statically

  http://bugme.osdl.org/show_bug.cgi?id=1185

  use X86 ACPI specific version of eisa_set_level_irq()
  http://bugzilla.kernel.org/show_bug.cgi?id=1390

Sysctl assumes its ctl_table.procname field is const, but the 
networking points ctl_table.procname to dev->name. When renaming 
a network device using SIOCSIFNAME, dev->name is modified and 
sysctl's assumption breaks, causing this behaviour, at least:

  1. sysctl wouldn't be able to remove the proc entry when the 
     device requests to be unregistered, because it would be 
     using the new name instead of the old one.
  2. proc entries for devices remain with the old name after 
     rename.
  
This change includes allocating the current device name to a
new copy upon registering with sysctl, plus re-registering with 
sysctl when the device is renamed.

This only fixes IPv4, IPv6, and net/core/neightbour.c.
Fixes for ax25 and decnet are also planned.

This fixes initrd with devfs.  With that combination the late-boot code
does temporary mount of devfs over rootfs /dev, which made /dev/initrd
inaccessible.  For setups without devfs that didn't happen. 

The fix is trivial - put the file in question outside of /dev; IOW,
we simply replace "/dev/initrd" with "/initrd.image" in init/*.

Confirmed to fix the problem by Valdis Kletnieks

into home.osdl.org:/home/torvalds/v2.5/linux

into nuts.ninka.net:/disk1/davem/BK/net-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

... as if "nohide" is in used, it will be the wrong filehandle, and
returning a filehandle is optional anyway.

When raid0 needs to split a request, it uses 'block' (1K) addresses
rather than sector (512b) addresses, which causes problems if the sector
address is odd.  This patch fixes the problem.

Thanks to Andy Polyakov <appro@fy.chalmers.se>

As found by Herbert Xu: the last v4l update broke bttv.  videobuf_iolock
was passed a vb that has just been filled with zeros. 

Fixed like this.

From: "Noah J. Misch" <noah@caltech.edu>

The Silicon Image driver is not building properly when CONFIG_PROC_FS is unset.
This patch corrects that problem.  It appears as though several utility
functions at the top of drivers/ide/pci/siimage.c that the driver always needs
accidentally fell within an #ifdef CONFIG_PROC_FS.  I also removed an excess
include while I noticed it.

- converts hdr_cur_pos into hdr_cur_offs to avoid leaking kernel
  addresses to userland. As a consequence hdr_last_pos is gone.

- correct buffer saturation mode bug by which the hdr_count would
  be reset, leading to no visible samples collected.

Newer versions of strace manipulate the syscall arguments and to make this
work for ia32 processes, we need to reload the syscall args after
doing the syscall-trace callback.

	enable_irq() sequences).

Tony pointed out (thanks Tony) that in -test8 kobject_set_name() will
try to free a kobject's k_name field if it's non-NULL, so we need to
zero it out in case kmalloc() gave us recycled memory or we'll try to
kfree a bogus area.

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5

This fixes a problem in EFI memory map trimming. For example,
here's part of the memory map on my i2000:

    mem00: type=4, attr=0x9, range=[0x0000000000000000-0x0000000000001000) (0MB)
    mem01: type=7, attr=0x9, range=[0x0000000000001000-0x0000000000088000) (0MB)
    mem02: type=4, attr=0x9, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    mem03: type=5, attr=0x8000000000000009, range=[0x00000000000c0000-0x0000000000100000) (0MB)
    mem04: type=7, attr=0x9, range=[0x0000000000100000-0x0000000004000000) (63MB)
    mem05: type=2, attr=0x9, range=[0x0000000004000000-0x00000000049ba000) (9MB)
    mem06: type=7, attr=0x9, range=[0x00000000049ba000-0x000000007ec0b000) (1954MB)
    ...

There's a hole at 0xa0000-0xc0000, so we should ignore all the WB memory
in that granule.  With 16MB granules, the existing code trims like this
(note the 4K page at 0x0 should have been ignored, but wasn't).

into intel.com:/home/lenb/bk/linux-acpi-test-2.6.0

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs