- 16 Aug, 2018 1 commit
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Some small msm fixes. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuZE0VEpatrtxGZtUB6FaQYr6Gf07UVpMsD15ook+5_WQ@mail.gmail.com
-
- 10 Aug, 2018 4 commits
-
-
Jeykumar Sankaran authored
This change validates the physical encoder before it is dereferenced. Signed-off-by:
Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More fixes for 4.19: - Fixes for scheduler - Fix for SR-IOV - Fixes for display Signed-off-by:
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
drm/imx: ipu-v3 plane offset and IPU id fixes - Fix U/V plane offsets for odd vertical offsets. Due to wrong operator order, the y offset was not rounded down properly for vertically chroma subsampled planar formats. - Fix IPU id number for boards that don't have an OF alias for their single IPU in the device tree. This is necessary to support imx-media on i.MX51 and i.MX53 SoCs. Signed-off-by:
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
drm/imx: use suspend/resume helpers, add ipu-v3 V4L2 XRGB32/XBGR32 support - Convert imx_drm_suspend/resume to use the drm_mode_config_helper_suspend/ resume functions. - Add support for V4L2_PIX_FMT_XRGB32/XBGR32, corresponding to DRM_FORMAT_XRGB8888/BGRX8888, respectively. Signed-off-by:
-
- 09 Aug, 2018 2 commits
-
-
Emily Deng authored
Extend the timeout for recovering vram bos from shadows on sr-iov to cover the worst case scenario for timeslices and VFs Under runtime, the wait fence time could be quite long when other VFs are in exclusive mode. For example, for 4 VF, every VF's exclusive timeout time is set to 3s, then the worst case is 9s. If the VF number is more than 4,then the worst case time will be longer. The 8s is the test data, with setting to 8s, it will pass the TDR test for 1000 times. SWDEV-161490 Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Nayan Deshmukh authored
We no longer have sched parameter so remove its description as well Signed-off-by:
Nayan Deshmukh <nayan26deshmukh@gmail.com> Signed-off-by:
-
- 07 Aug, 2018 13 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-08-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix gvt compilation broken on a silent conflict on fixes vs next merge - Fix runtime PM for LPE audio - Revert on ICL workaround - Interactive RPS mode - Fix for PSR sink status report Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-08-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Fixes an oops on the DP CEC code and a memory leak on the vkms driver. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.19: - Fix UVD 7.2 instance handling - Fix UVD 7.2 harvesting - GPU scheduler fix for when a process is killed - TTM cleanups - amdgpu CS bo_list fixes - Powerplay fixes for polaris12 and CZ/ST - DC fixes for link training certain HMDs - DC fix for vega10 blank screen in certain cases From: Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
From: Lucas Stach <l.stach@pengutronix.de> "not much to de-stage this time. Changes from Philipp and Souptick to use memset32 more and switch the fault handler to the new vm_fault_t and two small fixes for issues that can be hit in rare corner cases from me." Signed-off-by:
-
git://git.armlinux.org.uk/~rmk/linux-armDave Airlie authored
From: Russell King <rmk@armlinux.org.uk> As per the patches posted, discussed and tested by Peter Rosin, this converts TDA998x to a bridge driver, while still allowing Armada and TI LCDC to continue using it as they always have done. It also gets rid of the private .fill_modes function, and tweaks the TMDS divider calculation to be more correct to the available information. [airlied: fixed two conflicts] Signed-off-by:
-
git://linux-arm.org/linux-ldDave Airlie authored
From: Liviu Dudau <Liviu.Dudau@arm.com> "I managed to loose track of a few patches for HDLCD while focusing on Mali DP and found them again when investigating an issue with the way HDLCD behaves on teardown. They can go into drm-next for one of the v4.19-rcX if you're not going to do another pull request before the merge window." Signed-off-by:
-
Russell King authored
The serializer PLL divider is a power-of-two divider, so our calculation which assumes that it's a numerical divider is incorrect. Replace it with one that results in a power-of-two divider value instead. Tested with all supported modes with a Samsung S24C750. Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
We can achieve the same effect via the get_modes() method, rather than wrapping the fill_modes helper. Tested-by:
-
Russell King authored
Move the mode_valid() implementation to the bridge instead of the connector, as we're checking the bridge's capabilities. Tested-by:
-
Russell King authored
Register the bridge outside of the component helper as we have drivers that wish to use the tda998x without its encoder. Tested-by:
-
Russell King authored
Cleanup the code a little from the effects of the previous changes: - Move tda998x_destroy() to be above tda998x_create() - Use 'dev' directly in tda998x_create() where appropriate. Tested-by:
-
Russell King authored
Move the tda998x_priv allocation inside tda998x_create() and simplify the tda998x_create()'s arguments. Pass the same to tda998x_destroy(). Tested-by:
-
Russell King authored
Convert tda998x to a bridge driver with built-in encoder support for compatibility with existing component drivers. Tested-by:
-
- 06 Aug, 2018 20 commits
-
-
Lucas Stach authored
drm_sched_job_finish() is a work item scheduled for each finished job on a unbound system workqueue. This means the workers can execute out of order with regard to the real hardware job completions. If this happens queueing a timeout worker for the first job on the ring mirror list is wrong, as this may be a job which has already finished executing. Fix this by reorganizing the code to always queue the worker for the next job on the list, if this job hasn't finished yet. This is robust against a potential reordering of the finish workers. Also move out the timeout worker cancelling, so that we don't need to take the job list lock twice. As a small optimization list_del is used to remove the job from the ring mirror list, as there is no need to reinit the list head in the job we are about to free. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Hersen Wu authored
[why] for vega, dp set_panel_mode is handled by psp firmware. dal should not program the register again. [how] dal does not program panel mode. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Mikita Lipski authored
[why] When programming tonga's connector's backend we didn't take in account that HDMI's colour depth might be more than 8bpc therefore we need to add a switch statement that would adjust the pixel clock accordingly. [how] Add a switch statement updating clock by its appropriate coefficient. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
[Why] We seem to have an issue where high enough display clock will not get set properly during S3 resume if we only call vbios once [How] Expand condition of display clock programming to happen even when cached display clock matches requested display clock Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] The pointer for integrated_info can be NULL which causes the system to do a null pointer deference and hang on boot. [How] Add a check to ensure that integrated_info is not null before enabling DP ss. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
Signed-off-by:
Eric Bernstein <Eric.Bernstein@amd.com> Acked-by:
-
Mikita Lipski authored
[why] Prevent clock source sharing between HDMI and DP connectors. DP shouldn't be sharing its ref clock with phy clock, which caused an issue of older ASICS booting up with multiple diplays plugged in. [how] Add an extra check that would prevent HDMI and DP sharing clk. Signed-off-by:
-
Hersen Wu authored
[why] dp hbr2 eye diagram pattern for raven asic is not stabled. workaround is to use tp4 pattern. But this should not be applied to asic before raven. [how] add new bool varilable in asic caps. for raven asic, use the workaround. for carrizo, vega, do not use workaround. Signed-off-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] The calculated values for actual disp_clk_khz were ignored when notifying pplib of the new display requirements. In order to honor DFS bypass clocks from the hardware, the calculated value should be used. [How] The return value for set_dispclk is now assigned back into new_clocks and correctly carried through into dccg->clks.phyclk_khz. When notifying pplib of new display requirements dccg->clks.phyclk_khz is used instead of dce.dispclk_khz. The value of dce.dispclk_khz was never explicitly set to anything before. A 15% higher display clock value than calculated is no longer requested for dce110 since it now makes use of the calculated value. Since dce112 makes use of dce110's set_bandwidth but not its update_clocks it needs to have the value correctly carried through. Signed-off-by:
-
David Francis authored
[Why] Custom degamma lut functions are a feature we would like to support on compatible hardware [How] In atomic check, convert from array of drm_color_lut to dc_transfer_func. On hardware commit, allow for possibility of custom degamma. Both are based on the equivalent regamma pipeline. Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
David Francis authored
[Why] In the dce112 function to destroy the resource pool, engines (the aux engines) is destroyed twice. This has no ill effects but is a tad redundant. [How] Remove the redundant call Signed-off-by:
-
David Francis authored
[Why] If there is no program explicitly setting the backlight brightness (for example, during a minimal install of linux), the hardware defaults to maximum brightness but the backlight_device defaults to 0 value. Thus, settings displays the wrong brightness value. [How] When creating the backlight device, set brightness to max Signed-off-by:
-
David Francis authored
[Why] This hook that is supposed to read the actual backlight value is used in a few places throughout the kernel to setup or force update on backlight [How] Create a dc function that calls the existing abm function, and call that function from amdgpu Signed-off-by:
-
abdoulaye berthe authored
[Why] 400.1.1 is failing because we are not performing link training when we get an HPD pulse for the same display. This is breaking DP compliance [How] Always perform link training after HPD pulse if the detection reason is not DETECT_REASON_HPDRX. Signed-off-by:
abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Leo (Sunpeng) Li authored
[Why] The DRM mode's HDMI picture aspect ratio field was never saved in dc_stream's timing struct. This causes us to mistake a new stream to have the same timings as the old, even though the user has requested a different aspect ratio. [How] Save DRM's aspect ratio field within dc_stream's timing struct. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107153Signed-off-by:
-
Michał Winiarski authored
gvt_pin_guest_page extracted some of the gvt_dma_map_page functionality: commit 79e542f5 ("drm/i915/kvmgt: Support setting dma map for huge pages") And yet, part of it was reintroduced in: commit 39b4cbad ("drm/i915/kvmgt: Check the pfn got from vfio_pin_pages") Causing kvmgt part to no longer build. Let's remove it. Reported-by:
Tomasz Lis <tomasz.lis@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712155330.32055-1-michal.winiarski@intel.com (cherry picked from commit 4eaf317a) Signed-off-by:
-
Chris Wilson authored
The LPE audio is a child device of i915, it is powered up and down alongside the igfx and presents no independent runtime interface. This aptly fulfils the description of a "No-Callback" Device, so mark it thus. Fixes: 183c0035 ("drm/i915: Fix runtime PM for LPE audio") Testcase: igt/pm_rpm/basic-pci-d3-state Testcase: igt/pm_rpm/basic-rte Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180802140416.6062-1-chris@chris-wilson.co.uk (cherry picked from commit 46e831ab) Signed-off-by:
-
Mika Kuoppala authored
The register for 0xe420 is unable to hold any value, including this bit. The documentation is also mixed between having a register bit for toggle and having a state command setup for it. Apparently the register toggle is deprecated. Remove the register toggle as evidence shows it's futile. The thing remaining is an apology and humble request for Mesa folks to resurrect their state setup for this as they were on right track from start. This reverts commit 0bf059f3. Fixes: 0bf059f3 ("drm/i915/icl: WaEnableFloatBlendOptimization") References: HSDES#1406393558 Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Anuj Phogat <anuj.phogat@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
-
Chris Wilson authored
RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by:
-
Rodrigo Vivi authored
First of all don't try to read dpcd if PSR is not even supported. But also, if read failed return -EIO instead of reporting via a backchannel. v2: fix dev_priv: At this level m->private is the connector. (CI/DK) don't convert dpcd read errors to EIO. (DK) Fixes: 5b7b3086 ("drm/i915/psr: Split sink status into a separate debugfs node") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720003155.16290-1-rodrigo.vivi@intel.com (cherry picked from commit 7a72c78b) Signed-off-by:
-
