- 21 Oct, 2010 40 commits
-
-
Antti Palosaari authored
Remove HID and polling via firmware API. Implement direct access to remote codes via memory read and write. HID and polling via firmware api never worked 100% well and there was also some limitations which tied used remote and device together. After that it is possible to use upcoming kernel remote controller core. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Antti Palosaari authored
Detect TerraTec Cinergy T Stick Dual RC remote config using device USB ID instead of device EEPROM hash. It was found that there is devices with slightly different EEPROM content... Signed-off-by:
-
Antti Palosaari authored
Thanks to the TerraTec! Signed-off-by:
-
Antti Palosaari authored
Add USB ID [0ccd:0099] for TerraTec Cinergy T Stick Dual RC. Device is based for AF9015 + AF9013 + 2 x MxL5007T chips. Thanks to the TerraTec! Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Commit 490ade7e3f4474f626a8f5d778ead4e599b94fbc merge conflict fix leads situation where last nine device definitions were overridden mistakenly. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Mats Randgaard authored
Signed-off-by:
Mats Randgaard <mats.randgaard@tandberg.com> Signed-off-by:
Hans Verkuil <hans.verkuil@tandberg.com> Signed-off-by:
-
Mats Randgaard authored
Signed-off-by:
-
Mats Randgaard authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Teletext interface is provided via VBI interface for a long time. There's no need nor is there any known program using those old /dev/vtx nodes. Signed-off-by: -
Hans Verkuil authored
Remove all references to /dev/vtx in the documentation, except for some historical comments in dev-teletext.xml. Documentation/devices.txt is not updated, this will go through Alan Cox who maintains this file. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Remove the vtx (aka videotext aka teletext) API from the v4l2 core. This API was scheduled for removal in kernel 2.6.35. The vtx device nodes have been superseded by vbi device nodes for many years. No applications exist that use the vtx support. Of the two i2c drivers that actually support this API the saa5249 has been impossible to use for a year now and no known hardware that supports this device exists. The saa5246a is theoretically supported by the old mxb boards, but it never actually worked. In summary: there is no hardware that can use this API and there are no applications actually implementing this API. The vtx support still reserves minors 192-223 and we would really like to reuse those for upcoming new functionality. In the unlikely event that new hardware appears that wants to use the functionality provided by the vtx API, then that functionality should be build around the sliced VBI API instead. Signed-off-by:
-
Hans Verkuil authored
These old i2c teletext drivers are not supported by any hardware and cannot be tested anymore. Note that while the mxb board seemingly used the saa5246a driver, in reality this teletext driver never worked. These drivers are removed as part of the vtx feature removal, originally scheduled for 2.6.35. Signed-off-by:
-
Malcolm Priestley authored
bit 3(LK) indicates that the Vstatus is locked. Currently using bit 7(CF) which is usually present, results in early aborted search in FEC_AUTO and missing channels. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Malcolm Priestley authored
DM04/QQBOX DVB-S USB BOX with LME2510C+SHARP:BS2F7HZ7395 or LME2510+LGTDQT-P001F tuner. [mchehab@redhat.com: Fix merge conflicts/compilation and CodingStyle issues] Signed-off-by:
-
Mauro Carvalho Chehab authored
WARNING: please, no space before tabs + * ^IPOR = Power on Reset (VCC H=<2.2v L=>2.2v)$ WARNING: unnecessary whitespace before a quoted newline + deb_info("Frq=%d x=%d N=%d A=%d \n", frequency, x, N, A); WARNING: please, no space before tabs +^Ielse ^I^I/*frequency up to 2150000*/$ WARNING: unnecessary whitespace before a quoted newline + deb_info("Data 0=[%x%x%x%x] \n", data[0], data[1], data[2], data[3]); WARNING: unnecessary whitespace before a quoted newline + deb_info("Data 2=[%x%x] \n", data[2], data[3]); Cc: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: -
Malcolm Priestley authored
Tuner used in Sharp BS2F7VZ7395 dvbs module. When ix2505v tuner is attached to stv0288 form this module. Signed-off-by:
-
Julia Lawall authored
The same expression is tested twice and the result is the same each time. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @expression@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by:
-
Stefan Lippers-Hollmann authored
Adding the USB ID for my TerraTec Electronic GmbH Cinergy T RC MKII [0ccd:0097] and hooking it up into af9015, on top of your new NXP TDA18218 patches, makes it work for me. Just the shipped IR remote control doesn't seem to create keycode events yet (tested with different remote=%d parameters), are there any hints to add support for that? [ 2.250022] usb 1-10: new high speed USB device using ehci_hcd and address 5 [ 2.369287] usb 1-10: New USB device found, idVendor=0ccd, idProduct=0097 [ 2.369290] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.369293] usb 1-10: Product: USB2.0 DVB-T TV Stick [ 2.369294] usb 1-10: Manufacturer: NEWMI [ 2.369296] usb 1-10: SerialNumber: 010101010600001 [ 2.534023] usbcore: registered new interface driver hiddev [ 2.537235] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.1/input/input0 [ 2.537323] generic-usb 0003:0CCD:0097.0001: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:02.1-10/input1 [ 2.537349] usbcore: registered new interface driver usbhid [ 2.537351] usbhid: USB HID core driver [ 3.263177] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:02.0-8.1/input0 [ 3.286946] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:02.0-8.1/input1 [ 3.467136] generic-usb 0003:046D:C050.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-8.2/input0 [ 3.660890] generic-usb 0003:10D5:000D.0005: input,hidraw4: USB HID v1.10 Keyboard [No brand SP02-A1] on usb-0000:00:02.0-8.3/input0 [ 5.567632] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware [ 5.693497] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 5.773109] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state. [ 5.773168] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 5.774290] DVB: registering new adapter (TerraTec Cinergy T Stick RC) [ 6.007696] af9013: firmware version:5.1.0 [ 6.010843] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 6.032697] tda18218: NXP TDA18218HN successfully identified. [ 6.034442] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected. [ 6.040612] usbcore: registered new interface driver dvb_usb_af9015 [mchehab@redhat.com: Fix merge conflict with another board addition] Signed-off-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Acked-by:
-
lawrence rust authored
Making static data const avoids allocation of additional r/w memory and reduces initialisation time. It also provides some additional opportunities for compiler optimisations. Signed-off-by:
Lawrence Rust <lvr@softsystem.co.uk> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/staging/cx25821/cx25821-alsa.c:632: warning: ‘cx25821_audio_pci_tbl’ defined but not used Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/cx88/cx88-dsp.c: In function ‘detect_a2_a2m_eiaj’: drivers/media/video/cx88/cx88-dsp.c:158: warning: ‘carrier_freq’ may be used uninitialized in this function drivers/media/video/cx88/cx88-dsp.c:158: warning: ‘stereo_freq’ may be used uninitialized in this function drivers/media/video/cx88/cx88-dsp.c:158: warning: ‘dual_freq’ may be used uninitialized in this function Signed-off-by: -
Laurent Pinchart authored
The existing priv field stores subdev private data owned by the subdev driver. Host (bridge) drivers might need to store per-subdev host-specific data, such as a pointer to platform data. Add a v4l2_subdev host_priv field to store host-specific data, and rename the existing priv field to dev_priv. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Laurent Pinchart authored
Replace direct access to the v4l2_subdev priv field with the inline v4l2_get_subdevdata method. Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by:
-
lawrence rust authored
Using an enum and removing the default case from switch statements accessing the value enables the compiler to emit a warning (enabled with -Wall) when an audio mode is not handled. This highlights an omission in the function cx88_dsp_detect_stereo_sap() (in cx88-dsp.c) not handling WW_EIAJ and WW_M. Signed-off-by:
Lawrence Rust <lawrence@softsystem.co.uk> Signed-off-by:
-
Julia Lawall authored
Error codes are stored in rc, but the return value is always 0. Return rc instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by:
-
Julia Lawall authored
In each case, error codes are stored in rc, but the return value is always 0. Return rc instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by:
-
Julia Lawall authored
Error codes are stored in res, but the return value is always 0. Return res instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by:
-
Julia Lawall authored
In cx23885/cx23885-video.c, cx88/cx88-video.c, davinci/vpif_capture.c, and davinci/vpif_display.c, group the aligned code into a single if branch. In saa7134/saa7134-video.c, outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by:
-
Guennadi Liakhovetski authored
"sd" and "err" are too common names to be used in macros for local variables. Prefix them with an underscore to avoid name clashing. [mchehab@redhat.com: whitespace cleanups] Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Jarod Wilson authored
This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/gspca/konica.c: In function ‘sd_start’: drivers/media/video/gspca/konica.c:322: error: implicit declaration of function ‘usb_buffer_alloc’ drivers/media/video/gspca/konica.c:325: warning: assignment makes pointer from integer without a cast make[3]: ** [drivers/media/video/gspca/konica.o] Erro 1 Signed-off-by: -
Hans de Goede authored
gspca_xirlink_cit: adjust ibm netcam pro framerate for available bandwidth Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
This new driver replaces the (known to not work / crash) usbvideo konicawc driver. Signed-off-by:
-
Hans de Goede authored
gspca_*: correct typo in my email address in various subdrivers Signed-off-by:
-
Hans de Goede authored
Mark usbvideo ibmcam driver as deprecated, it is replaced by the new gscpa xirlink_cit driver. Signed-off-by:
-
