In __dax_pmd_fault() we currently assume that get_block() will always
set bh.b_bdev and we unconditionally dereference it in __dax_dbg().

This assumption isn't always true - when called for reads of holes
ext4_dax_mmap_get_block() returns a buffer head where bh->b_bdev is
never set.  I hit this BUG while testing the DAX PMD fault path.

Instead, initialize bh.b_bdev before passing bh into get_block().  It is
possible that the filesystem's get_block() will update bh.b_bdev, and
this is fine - we just want to initialize bh.b_bdev to something
reasonable so that the calls to __dax_dbg() work and print something
useful.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more btrfs updates from Chris Mason:
 "These are mostly fixes that we've been testing, but also we grabbed
  and tested a few small cleanups that had been on the list for a while.

  Zhao Lei's patchset also fixes some early ENOSPC buglets"

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (21 commits)
  btrfs: raid56: Use raid_write_end_io for scrub
  btrfs: Remove unnecessary ClearPageUptodate for raid56
  btrfs: use rbio->nr_pages to reduce calculation
  btrfs: Use unified stripe_page's index calculation
  btrfs: Fix calculation of rbio->dbitmap's size calculation
  btrfs: Fix no_space in write and rm loop
  btrfs: merge functions for wait snapshot creation
  btrfs: delete unused argument in btrfs_copy_from_user
  btrfs: Use direct way to determine raid56 write/recover mode
  btrfs: Small cleanup for get index_srcdev loop
  btrfs: Enhance chunk validation check
  btrfs: Enhance super validation check
  Btrfs: fix deadlock running delayed iputs at transaction commit time
  Btrfs: fix typo in log message when starting a balance
  btrfs: remove duplicate const specifier
  btrfs: initialize the seq counter in struct btrfs_device
  Btrfs: clean up an error code in btrfs_init_space_info()
  btrfs: fix iterator with update error in backref.c
  Btrfs: fix output of compression message in btrfs_parse_options()
  Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots
  ...

Pull ext4 updates from Ted Ts'o:
 "Some locking and page fault bug fixes from Jan Kara, some ext4
  encryption fixes from me, and Li Xi's Project Quota commits"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  fs: clean up the flags definition in uapi/linux/fs.h
  ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support
  ext4: add project quota support
  ext4: adds project ID support
  ext4 crypto: simplify interfaces to directory entry insert functions
  ext4 crypto: add missing locking for keyring_key access
  ext4: use pre-zeroed blocks for DAX page faults
  ext4: implement allocation of pre-zeroed blocks
  ext4: provide ext4_issue_zeroout()
  ext4: get rid of EXT4_GET_BLOCKS_NO_LOCK flag
  ext4: document lock ordering
  ext4: fix races of writeback with punch hole and zero range
  ext4: fix races between buffered IO and collapse / insert range
  ext4: move unlocked dio protection from ext4_alloc_file_blocks()
  ext4: fix races between page faults and hole punching

Pull more xfs updates from Dave Chinner:
 "This is the second update for XFS that I mentioned in the original
  pull request last week.

  It contains a revert for a suspend regression in 4.4 and a fix for a
  long standing log recovery issue that has been further exposed by all
  the log recovery changes made in the original 4.5 merge.

  There is one more thing in this pull request - one that I forgot to
  merge into the origin.  That is, pulling the XFS_IOC_FS[GS]ETXATTR
  ioctl up to the VFS level so that other filesystems can also use it
  for modifying project quota IDs

  Summary:

   - promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
     it can be shared with other filesystems.  The ext4 project quota
     functionality is the first target for this.  The commits in this
     series have not been updated with review or final SOB tags because
     the branch they were originally published in was needed by ext4.
     Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>

   - Revert a change that is causing suspend failures.

   - Fix a use-after-free that can occur on log mount failures.  Been
     around forever, but now exposed by other changes to log recovery
     made in the first 4.5 merge"

* tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: log mount failures don't wait for buffers to be released
  Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
  xfs: introduce per-inode DAX enablement
  xfs: use FS_XFLAG definitions directly
  fs: XFS_IOC_FS[SG]SETXATTR to FS_IOC_FS[SG]ETXATTR promotion

Pull more vfs updates from Al Viro:
 "Embarrassing braino fix + pipe page accounting + fixing an eyesore in
  find_filesystem() (checking that s1 is equal to prefix of s2 of given
  length can be done in many ways, but "compare strlen(s1) with length
  and then do strncmp()" is not a good one...)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  [regression] fix braino in fs/dlm/user.c
  pipe: limit the per-user amount of pages allocated in pipes
  find_filesystem(): simplify comparison

Merge misc fixes from Andrew Morton:
 "Six fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock
  reiserfs: fix dereference of ERR_PTR
  ratelimit: fix bug in time interval by resetting right begin time
  mm: fix kernel crash in khugepaged thread
  mm: fix mlock accouting
  thp: change pmd_trans_huge_lock() interface to return ptl

Pull NVMe updates from Jens Axboe:
 "Last branch for this series is the nvme changes.  It's in a separate
  branch to avoid splitting too much between core and NVMe changes,
  since NVMe is still helping drive some blk-mq changes.  That said, not
  a huge amount of core changes in here.  The grunt of the work is the
  continued split of the code"

* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
  uapi: update install list after nvme.h rename
  NVMe: Export NVMe attributes to sysfs group
  NVMe: Shutdown controller only for power-off
  NVMe: IO queue deletion re-write
  NVMe: Remove queue freezing on resets
  NVMe: Use a retryable error code on reset
  NVMe: Fix admin queue ring wrap
  nvme: make SG_IO support optional
  nvme: fixes for NVME_IOCTL_IO_CMD on the char device
  nvme: synchronize access to ctrl->namespaces
  nvme: Move nvme_freeze/unfreeze_queues to nvme core
  PCI/AER: include header file
  NVMe: Export namespace attributes to sysfs
  NVMe: Add pci error handlers
  block: remove REQ_NO_TIMEOUT flag
  nvme: merge iod and cmd_info
  nvme: meta_sg doesn't have to be an array
  nvme: properly free resources for cancelled command
  nvme: simplify completion handling
  nvme: special case AEN requests
  ...

Pull lightnvm fixes and updates from Jens Axboe:
 "This should have been part of the drivers branch, but it arrived a bit
  late and wasn't based on the official core block driver branch.  So
  they got a small scolding, but got a pass since it's still new.  Hence
  it's in a separate branch.

  This is mostly pure fixes, contained to lightnvm/, and minor feature
  additions"

* 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block: (26 commits)
  lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM
  lightnvm: introduce factory reset
  lightnvm: use system block for mm initialization
  lightnvm: introduce ioctl to initialize device
  lightnvm: core on-disk initialization
  lightnvm: introduce mlc lower page table mappings
  lightnvm: add mccap support
  lightnvm: manage open and closed blocks separately
  lightnvm: fix missing grown bad block type
  lightnvm: reference rrpc lun in rrpc block
  lightnvm: introduce nvm_submit_ppa
  lightnvm: move rq->error to nvm_rq->error
  lightnvm: support multiple ppas in nvm_erase_ppa
  lightnvm: move the pages per block check out of the loop
  lightnvm: sectors first in ppa list
  lightnvm: fix locking and mempool in rrpc_lun_gc
  lightnvm: put block back to gc list on its reclaim fail
  lightnvm: check bi_error in gc
  lightnvm: return the get_bb_tbl return value
  lightnvm: refactor end_io functions for sync
  ...

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for 4.5, with the exception of
  NVMe, which is in a separate branch and will be posted after this one.

  This pull request contains:

   - A set of bcache stability fixes, which have been acked by Kent.
     These have been used and tested for more than a year by the
     community, so it's about time that they got in.

   - A set of drbd updates from the drbd team (Andreas, Lars, Philipp)
     and Markus Elfring, Oleg Drokin.

   - A set of fixes for xen blkback/front from the usual suspects, (Bob,
     Konrad) as well as community based fixes from Kiri, Julien, and
     Peng.

   - A 2038 time fix for sx8 from Shraddha, with a fix from me.

   - A small mtip32xx cleanup from Zhu Yanjun.

   - A null_blk division fix from Arnd"

* 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits)
  null_blk: use sector_div instead of do_div
  mtip32xx: restrict variables visible in current code module
  xen/blkfront: Fix crash if backend doesn't follow the right states.
  xen/blkback: Fix two memory leaks.
  xen/blkback: make st_ statistics per ring
  xen/blkfront: Handle non-indirect grant with 64KB pages
  xen-blkfront: Introduce blkif_ring_get_request
  xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule()
  xen/blkback: Free resources if connect_ring failed.
  xen/blocks: Return -EXX instead of -1
  xen/blkback: make pool of persistent grants and free pages per-queue
  xen/blkback: get the number of hardware queues/rings from blkfront
  xen/blkback: pseudo support for multi hardware queues/rings
  xen/blkback: separate ring information out of struct xen_blkif
  xen/blkfront: correct setting for xen_blkif_max_ring_order
  xen/blkfront: make persistent grants pool per-queue
  xen/blkfront: Remove duplicate setting of ->xbdev.
  xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors.
  xen/blkfront: negotiate number of queues/rings to be used with backend
  xen/blkfront: split per device io_lock
  ...

NFS on a 2 node ocfs2 cluster each node exporting dir.  The lock causing
the hang is the global bit map inode lock.  Node 1 is master, has the
lock granted in PR mode; Node 2 is in the converting list (PR -> EX).
There are no holders of the lock on the master node so it should
downconvert to NL and grant EX to node 2 but that does not happen.
BLOCKED + QUEUED in lock res are set and it is on osb blocked list.
Threads are waiting in __ocfs2_cluster_lock on BLOCKED.  One thread
wants EX, rest want PR.  So it is as though the downconvert thread needs
to be kicked to complete the conv.

The hang is caused by an EX req coming into __ocfs2_cluster_lock on the
heels of a PR req after it sets BUSY (drops l_lock, releasing EX
thread), forcing the incoming EX to wait on BUSY without doing anything.
PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR,
queues ast.

At this time, upconvert (PR ->EX) arrives from node 2, finds conflict
with node 1 lock in PR, so the lock res is put on dlm thread's dirty
listt.

After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till
awoken by ast.

Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in
that order.  dlm_shuffle_lists ques a bast on behalf of node 2 (which
will be run by dlm_thread right after the ast).  ast does its part, sets
UPCONVERT_FINISHING, clears BUSY and wakes its waiters.  Next,
dlm_thread runs bast.  It sets BLOCKED and kicks dc thread.  dc thread
runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing
anything and reques.

Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead
of PR, it wakes up first, finds BLOCKED set and skips doing anything but
clearing UPCONVERT_FINISHING (which was actually "meant" for the PR
thread), and this time waits on BLOCKED.  Next, the PR thread comes out
of wait but since UPCONVERT_FINISHING is not set, it skips updating the
l_ro_holders and goes straight to wait on BLOCKED.  So there, we have a
hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb
blocked list.  Only when dc thread is awoken, it will run
ocfs2_unblock_lock and things will unhang.

One way to fix this is to wake the dc thread on the flag after clearing
UPCONVERT_FINISHING

Orabug: 20933419
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs_iget() returns either NULL or error code in ERR_PTR.  And we
were only checking for NULL, so in case of some other error we will try
to dereference the ERR_PTR(-errno) thinking it to be a valid pointer.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rs->begin in ratelimit is set in two cases.
 1) when rs->begin was not initialized
 2) when rs->interval was passed

For case #2, current ratelimit sets the begin to 0.  This incurrs
improper suppression.  The begin value will be set in the next ratelimit
call by 1).  Then the time interval check will be always false, and
rs->printed will not be initialized.  Although enough time passed,
ratelimit may return 0 if rs->printed is not less than rs->burst.  To
reset interval properly, begin should be jiffies rather than 0.

For an example code below:

    static DEFINE_RATELIMIT_STATE(mylimit, 1, 1);
    for (i = 1; i <= 10; i++) {
        if (__ratelimit(&mylimit))
            printk("ratelimit test count %d\n", i);
        msleep(3000);
    }

test result in the current code shows suppression even there is 3 seconds sleep.

  [  78.391148] ratelimit test count 1
  [  81.295988] ratelimit test count 2
  [  87.315981] ratelimit test count 4
  [  93.336267] ratelimit test count 6
  [  99.356031] ratelimit test count 8
  [ 105.376367] ratelimit test count 10
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This crash is caused by NULL pointer deference, in page_to_pfn() marco,
when page == NULL :

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  Internal error: Oops: 94000006 [#1] SMP
  Modules linked in:
  CPU: 1 PID: 26 Comm: khugepaged Tainted: G        W       4.3.0-rc6-next-20151022ajb-00001-g32f3386-dirty #3
  PC is at khugepaged+0x378/0x1af8
  LR is at khugepaged+0x418/0x1af8
  Process khugepaged (pid: 26, stack limit = 0xffffffc079638020)
  Call trace:
    khugepaged+0x378/0x1af8
    kthread+0xdc/0xf4
    ret_from_fork+0xc/0x40
  Code: 35001700 f0002c60 aa0703e3 f9009fa0 (f94000e0)
  ---[ end trace 637503d8e28ae69e  ]---
  Kernel panic - not syncing: Fatal exception
  CPU2: stopping
  CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D W       4.3.0-rc6-next-20151022ajb-00001-g32f3386-dirty #3
  Hardware name: linux,dummy-virt (DT)

[akpm@linux-foundation.org: fix fat-fingered merge resolution]
Signed-off-by: yalin wang <yalin.wang2010@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tetsuo Handa reported underflow of NR_MLOCK on munlock.

Testcase:

    #include <stdio.h>
    #include <stdlib.h>
    #include <sys/mman.h>

    #define BASE ((void *)0x400000000000)
    #define SIZE (1UL << 21)

    int main(int argc, char *argv[])
    {
        void *addr;

        system("grep Mlocked /proc/meminfo");
        addr = mmap(BASE, SIZE, PROT_READ | PROT_WRITE,
                MAP_ANONYMOUS | MAP_PRIVATE | MAP_LOCKED | MAP_FIXED,
                -1, 0);
        if (addr == MAP_FAILED)
            printf("mmap() failed\n"), exit(1);
        munmap(addr, SIZE);
        system("grep Mlocked /proc/meminfo");
        return 0;
    }

It happens on munlock_vma_page() due to unfortunate choice of nr_pages
data type:

    __mod_zone_page_state(zone, NR_MLOCK, -nr_pages);

For unsigned int nr_pages, implicitly casted to long in
__mod_zone_page_state(), it becomes something around UINT_MAX.

munlock_vma_page() usually called for THP as small pages go though
pagevec.

Let's make nr_pages signed int.

Similar fixes in 6cdb18ad ("mm/vmstat: fix overflow in
mod_zone_page_state()") used `long' type, but `int' here is OK for a
count of the number of sub-pages in a huge page.

Fixes: ff6a6da6 ("mm: accelerate munlock() treatment of THP pages")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michel Lespinasse <walken@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>  [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After THP refcounting rework we have only two possible return values
from pmd_trans_huge_lock(): success and failure.  Return-by-pointer for
ptl doesn't make much sense in this case.

Let's convert pmd_trans_huge_lock() to return ptl on success and NULL on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

it's "bugger off if we got ERR_PTR", not the other way round...
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Expose an interface to allow users to mark several accesses together as
being user space accesses, allowing batching of the surrounding user
space access markers (SMAP on x86, PAN on arm64, domain register
switching on arm).

This is currently only used for the user string lenth and copying
functions, where the SMAP overhead on x86 drowned the actual user
accesses (only noticeable on newer microarchitectures that support SMAP
in the first place, of course).

* user access batching branch:
  Use the new batched user accesses in generic user string handling
  Add 'unsafe' user access functions for batched accesses
  x86: reorganize SMAP handling in user space accesses

Merge third patch-bomb from Andrew Morton:
 "I'm pretty much done for -rc1 now:

   - the rest of MM, basically

   - lib/ updates

   - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit

   - cpu_mask simplifications

   - kexec, rapidio, MAINTAINERS etc, etc.

   - more dma-mapping cleanups/simplifications from hch"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
  MAINTAINERS: add/fix git URLs for various subsystems
  mm: memcontrol: add "sock" to cgroup2 memory.stat
  mm: memcontrol: basic memory statistics in cgroup2 memory controller
  mm: memcontrol: do not uncharge old page in page cache replacement
  Documentation: cgroup: add memory.swap.{current,max} description
  mm: free swap cache aggressively if memcg swap is full
  mm: vmscan: do not scan anon pages if memcg swap limit is hit
  swap.h: move memcg related stuff to the end of the file
  mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
  mm: vmscan: pass memcg to get_scan_count()
  mm: memcontrol: charge swap to cgroup2
  mm: memcontrol: clean up alloc, online, offline, free functions
  mm: memcontrol: flatten struct cg_proto
  mm: memcontrol: rein in the CONFIG space madness
  net: drop tcp_memcontrol.c
  mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
  mm: memcontrol: allow to disable kmem accounting for cgroup2
  mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
  mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
  mm: memcontrol: separate kmem code from legacy tcp accounting code
  ...

Pull overlayfs updates from Miklos Szeredi:
 "This contains several bug fixes and a new mount option
  'default_permissions' that allows read-only exported NFS
  filesystems to be used as lower layer"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: check dentry positiveness in ovl_cleanup_whiteouts()
  ovl: setattr: check permissions before copy-up
  ovl: root: copy attr
  ovl: move super block magic number to magic.h
  ovl: use a minimal buffer in ovl_copy_xattr
  ovl: allow zero size xattr
  ovl: default permissions

Pull fuse updates from Miklos Szeredi:
 "This adds SEEK_HOLE and SEEK_DATA support in lseek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add support for SEEK_HOLE and SEEK_DATA in lseek

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.5 merge window:

  Enumeration:
   - Simplify config space size computation (Bjorn Helgaas)
   - Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
   - Support PCIe devices with short cfg_size (Jason S. McMullan)
   - Add Netronome vendor and device IDs (Jason S. McMullan)
   - Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
   - Add Netronome NFP4000 PF device ID (Simon Horman)
   - Limit config space size for Netronome NFP4000 (Simon Horman)
   - Print warnings for all invalid expansion ROM headers (Vladis Dronov)

  Resource management:
   - Fix minimum allocation address overwrite (Christoph Biedl)

  PCI device hotplug:
   - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
   - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
   - shpchp: Constify hpc_ops structure (Julia Lawall)
   - ibmphp: Remove unneeded NULL test (Julia Lawall)

  Power management:
   - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)

  Virtualization
   - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)

  MSI:
   - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
   - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
   - Initialize MSI capability for all architectures (Guilherme G. Piccoli)
   - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)

  ARM Versatile host bridge driver:
   - Remove unused pci_sys_data structures (Lorenzo Pieralisi)

  Broadcom iProc host bridge driver:
   - Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
   - Do not use 0x in front of %pap (Dmitry V. Krivenok)
   - Update iProc PCIe device tree binding (Ray Jui)
   - Add PAXC interface support (Ray Jui)
   - Add iProc PCIe MSI device tree binding (Ray Jui)
   - Add iProc PCIe MSI support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Use gpio_set_value_cansleep() (Fabio Estevam)
   - Add support for active-low reset GPIO (Petr Štetiar)

  HiSilicon host bridge driver:
   - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)

  Intel VMD host bridge driver:
   - Export irq_domain_set_info() for module use (Keith Busch)
   - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
   - Use 32 bit PCI domain numbers (Keith Busch)
   - Add driver for Intel Volume Management Device (VMD) (Keith Busch)

  Qualcomm host bridge driver:
   - Document PCIe devicetree bindings (Stanimir Varbanov)
   - Add Qualcomm PCIe controller driver (Stanimir Varbanov)
   - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
   - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)

  Renesas R-Car host bridge driver:
   - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
   - Allow DT to override default window settings (Phil Edworthy)
   - Convert to DT resource parsing API (Phil Edworthy)
   - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
   - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
   - Add runtime PM support to pcie-rcar (Phil Edworthy)
   - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
   - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
   - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - Simplify control flow (Bjorn Helgaas)
   - Make config accessor override checking symmetric (Bjorn Helgaas)
   - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)

  Miscellaneous:
   - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
   - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
   - Fix all whitespace issues (Bogicevic Sasa)
   - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
   - Use to_pci_dev() instead of open-coding it (Geliang Tang)
   - Use kobj_to_dev() instead of open-coding it (Geliang Tang)
   - Use list_for_each_entry() to simplify code (Geliang Tang)
   - Fix typos in <linux/msi.h> (Thomas Petazzoni)
   - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"

* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
  PCI: Limit config space size for Netronome NFP4000
  PCI: Add Netronome NFP4000 PF device ID
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  PCI: host: Add of_pci_get_host_bridge_resources() stub
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
  PCI: rcar: Add Gen2 PHY setup to pcie-rcar
  PCI: rcar: Add runtime PM support to pcie-rcar
  PCI: designware: Make config accessor override checking symmetric
  PCI: ibmphp: Remove unneeded NULL test
  ARM: dts: ifc6410: enable PCIe DT node for this board
  ARM: dts: apq8064: add PCIe devicetree node
  PCI: hotplug: Use list_for_each_entry() to simplify code
  PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
  PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
  PCI: Avoid iterating through memory outside the resource window
  PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
  ...

Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains a new driver for OMAP (using the
  dual-mode timers) as well as an assortment of fixes all across the
  board"

* tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Mark all devices as "might sleep"
  pwm: omap-dmtimer: Potential NULL dereference on error
  pwm: add HAS_IOMEM dependency to PWM_FSL_FTM
  pwm: Add PWM driver for OMAP using dual-mode timers
  pwm: rcar: Improve accuracy of frequency division setting
  pwm: lpc32xx: return ERANGE, if requested period is not supported
  pwm: lpc32xx: fix and simplify duty cycle and period calculations
  pwm: lpc32xx: make device usable with common clock framework
  pwm: lpc32xx: correct number of PWM channels from 2 to 1
  dt: lpc32xx: pwm: update documentation of LPC32xx PWM device
  dt: lpc32xx: pwm: correct LPC32xx PWM device node example
  pwm: fsl-ftm: Fix clock enable/disable when using PM
  pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
  pwm: lpss: Select core part automatically
  pwm: lpss: Update PWM setting for Broxton
  pwm: bcm2835: Fix email address specification
  pwm: bcm2835: Prevent division by zero
  pwm: bcm2835: Calculate scaler in ->config()
  pwm: lpss: Remove ->free() callback

Pull CRIS updates from Jesper Nilsson:
 "Just some fixups for section mismatches from Guenter"

* tag 'cris-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: Fix section mismatches in architecture startup code
  cris: debugport: Fix section mismatches

Pull h8300 updates from Yoshinori Sato:
 - Add KGDB support
 - zImage fix
 - various cleanup

* tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linux:
  h8300: System call entry enable interrupt.
  h8300: show_stack cleanup
  h8300: Restraint of warning.
  h8300: Add KGDB support.
  irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readw
  h8300: signal stack fix
  h8300: Add LZO compression
  h8300: zImage alignment fix
  clk: h8300: Remove "sh73a0-" part from compatible value
  h8300: zImage alignment fix

Commit d1cd2142 ("pwm: Set enable state properly on failed call to
enable") introduced a mutex that is needed to protect internal state of
PWM devices. Since that mutex is acquired in pwm_set_polarity() and in
pwm_enable() and might potentially block, all PWM devices effectively
become "might sleep".

It's rather pointless to keep the .can_sleep field around, but given
that there are external users let's postpone the removal for the next
release cycle.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Pull more power management and ACPI updates from Rafael Wysocki:
 "This includes fixes on top of the previous batch of PM+ACPI updates
  and some new material as well.

  From the new material perspective the most significant are the driver
  core changes that should allow USB devices to stay suspended over
  system suspend/resume cycles if they have been runtime-suspended
  already beforehand.  Apart from that, ACPICA is updated to upstream
  revision 20160108 (cosmetic mostly, but including one fixup on top of
  the previous ACPICA update) and there are some devfreq updates the
  didn't make it before (due to timing).

  A few recent regressions are fixed, most importantly in the cpuidle
  menu governor and in the ACPI backlight driver and some x86 platform
  drivers depending on it.

  Some more bugs are fixed and cleanups are made on top of that.

  Specifics:

   - Modify the driver core and the USB subsystem to allow USB devices
     to stay suspended over system suspend/resume cycles if they have
     been runtime-suspended already beforehand and fix some bugs on top
     of these changes (Tomeu Vizoso, Rafael Wysocki).

   - Update ACPICA to upstream revision 20160108, including updates of
     the ACPICA's copyright notices, a code fixup resulting from a
     regression fix that was necessary in the upstream code only (the
     regression fixed by it has never been present in Linux) and a
     compiler warning fix (Bob Moore, Lv Zheng).

   - Fix a recent regression in the cpuidle menu governor that broke it
     on practically all architectures other than x86 and make a couple
     of optimizations on top of that fix (Rafael Wysocki).

   - Clean up the selection of cpuidle governors depending on whether or
     not the kernel is configured for tickless systems (Jean Delvare).

   - Revert a recent commit that introduced a regression in the ACPI
     backlight driver, address the problem it attempted to fix in a
     different way and revert one more cosmetic change depending on the
     problematic commit (Hans de Goede).

   - Add two more ACPI backlight quirks (Hans de Goede).

   - Fix a few minor problems in the core devfreq code, clean it up a
     bit and update the MAINTAINERS information related to it (Chanwoo
     Choi, MyungJoo Ham).

   - Improve an error message in the ACPI fan driver (Andy Lutomirski).

   - Fix a recent build regression in the cpupower tool (Shreyas
     Prabhu)"

* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  cpuidle: menu: Avoid pointless checks in menu_select()
  sched / idle: Drop default_idle_call() fallback from call_cpuidle()
  cpupower: Fix build error in cpufreq-info
  cpuidle: Don't enable all governors by default
  cpuidle: Default to ladder governor on ticking systems
  time: nohz: Expose tick_nohz_enabled
  ACPICA: Update version to 20160108
  ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
  ACPICA: Additional 2016 copyright changes
  ACPICA: Reduce regression fix divergence from upstream ACPICA
  ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
  ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
  ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
  ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
  ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
  ACPI / fan: Improve acpi_device_update_power error message
  ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
  cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
  MAINTAINERS: Add devfreq-event entry
  MAINTAINERS: Add missing git repository and directory for devfreq
  ...

Merge tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH driver updates from Simon Horman:
 "Clean up the clock API on legacy SH to make it more similar to the
  Common Clock Framework.  This will avoid different behaviour in
  drivers shared between legacy and CCF-based platforms (e.g.  SCIF)"

* tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: clk: Avoid crashes when passing NULL clocks
  drivers: sh: clk: Remove obsolete and unused clk_round_parent()

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.  Some for SoC-family code under
  drivers/soc, but also some other driver updates that don't belong
  anywhere else.  We also bring in the drivers/reset code through
  arm-soc.

  Some of the larger updates:

   - Qualcomm support for SMEM, SMSM, SMP2P.  All used to communicate
     with other parts of the chip/board on these platforms, all
     proprietary protocols that don't fit into other subsystems and live
     in drivers/soc for now.

   - System bus driver for UniPhier

   - Driver for the TI Wakeup M3 IPC device

   - Power management for Raspberry PI

  + Again a bunch of other smaller updates and patches"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: uniphier: allow only built-in driver
  ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
  MAINTAINERS: Drop Kumar Gala from QCOM
  bus: uniphier-system-bus: add UniPhier System Bus driver
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Define two new packets from the latest firmware.
  drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
  soc: mediatek: SCPSYS: Add regulator support
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  memory/tegra: Add number of TLB lines for Tegra124
  reset: hi6220: fix modular build
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  ...

Pull ARM 64-bit defconfig updates from Olof Johansson:
 "As mentioned earlier, we usually bake this into the general "arm64"
  branch, but this release we have partitioned up the updates a bit
  more.

  Most of these updates are enabling new SoCs in the single defconfig
  for 64-bit, Renesas R8A7795, a number of Tegra options, Socionext
  Uniphier and a handful of new options for other platforms as well"

* tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: mediatek: enable MTK_TIMER
  arm64: defconfig: add CS2000 support
  arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs
  arm64: defconfig: enable UniPhier SoCs support
  arm64: add Kconfig entry for Socionext UniPhier SoC family
  arm64: defconfig: add Renesas sound and AK4613 support
  arm64: defconfig: add Renesas R-Car DMAC driver support
  arm64: defconfig: Enable Renesas R-Car I2C Controller
  arm64: defconfig: enable EthernetAVB
  arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC
  arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs
  arm64: defconfig: renesas: Enable Renesas r8a7795 SoC
  arm64: defconfig: Enable printk timestamps
  arm64: defconfig: Enable squashfs support
  arm64: defconfig: Enable sdhci-tegra driver
  arm64: defconfig: Enable serial-tegra driver
  arm64: defconfig: Enable tegra-apbdma driver
  arm64: defconfig: Do not disable Tegra AHB driver
  arm64: defconfig: Enable Tegra210 support

Pull ARM SoC defconfig updates from Olof Johansson:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs because it makes sense to have them enabled on various
  development or product boards.  Too much to enumerate each here.

  There's an introduction of a pxa_defconfig, since PXA finally will
  allow building a shared kernel for all boards.  With this, we can
  hopefully remove a bunch of individual defconfigs down the road but it
  requires a bit of real life testing and transition period"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig
  ARM: multi_v7_defconfig: Add rockchip audio support
  arm: multi_v7_defconfig: Add virtio drivers
  ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
  ARM: versatile: enable the right LEDs
  ARM: pxa: add defconfig covering all the boards
  ARM: versatile: select some defaults in defconfig
  ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3
  ARM: bcm2835: enable auxiliary spi driver in defconfig
  ARM: bcm2835: enable all bcm2835-relevant in defconfig
  ARM: default to multi_v7_defconfig
  ARM: multi_v7_defconfig: enable rk808 clkout module
  ARM: multi_v7_defconfig: enable rockchip crypto module
  ARM: multi_v7_defconfig: enable Rockchip io-domain driver
  ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators
  ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218
  ARM: multi_v7_defconfig: enable TPS65217 regulator
  ARM: realview: select apropriate targets
  ARM: defconfig: qcom: Enable SSBI drivers
  ARM: defconfig: Update qcom_defconfig
  ...

Pull ARM 64-bit DT updates from Olof Johansson:
 "This is the first release where we split up the 64-bit contributions a
  bit more, and in particular we are having a separate DT branch for
  them.

  Contents:

   - New devices added to Broadcom NorthStar2
   - Misc fixes for Exynos7 boards
   - QCOM updates for MSM8916
   - Rockchip tweaks for rk3368 SoC and eval board
   - A series of fixes for APM X-Gene v1 and v2
   - Renesas R8A7795 CPU/PSCI additions
   - Marvell Berlin4CT PSCI, cpuidle, watchdog portions
   - Freescale LS1043a SoC and dev board support

  + some treewide or other misc changes"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  dts/ls2080a: Update DTSI to add support of SP805 WDT
  Documentation: DT: Add entry for ARM SP805-WDT
  arm64: dts: X-Gene v2: I2C1 clock is always on
  arm64: dts: X-Gene v1: I2C0 clock is always on
  arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
  arm64: dts: hikey: add label properties to UARTs
  arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
  arm64: dts: apq8016-sbc: enable UART0 on LS connector
  arm64: dts: juno: Add idle-states to device tree
  arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
  arm64: dts: add LS1043a-RDB board support
  arm64: dts: add Freescale LS1043a SoC support
  Documentation: DT: Add entry for Freescale LS1043a-RDB board
  arm64: dts: uniphier: add PH1-LD10 SoC/board support
  arm64: renesas: r8a7795: fix SATA clock assignment
  arm64: dts: salvator-x: Enable SATA controller
  arm64: dts: r8a7795: Add SATA controller node
  arm64: renesas: r8a7795: add internal delay for i2c IPs
  arm64: renesas: salvator-x: Add board part number to DT bindings
  arm64: dts: r8a7795: Add pmu device nodes
  ...

Pull ARM DT updates from Olof Johansson:
 "As usual, the bulk of this release is again DT file contents.

  There's a huge number of changes here, and it's challenging to give a
  crisp overview of just what is in here.  To start with:

  New boards:

   - TI-based DM3730 from LogicPD (Torpedo)
   - Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
   - Raspberry Pi 2 DT files
   - Watchdog on Meson8b
   - Veyron-mickey (ASUS Chromebit) DTS
   - Rockchip rk3228 SoC and eval board
   - Sigma Designs Tango4

  Improvements:

   - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
   - Misc new devices for Rockchip rk3036 and rk3288
   - Allwinner updates for misc SoCs and systems

  ... and a _large_ number of other changes across the field.  Devices
  added to SoC DTSI and board DTS files for a number of SoC vendors, new
  product boards on already-supported SoCs, cleanups and refactorings of
  existing DTS/DTSI files and a bunch of other changes"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
  ARM: dts: compulab: add new board description
  ARM: versatile: add the syscon LEDs to the DT
  dts: vt8500: Fix errors in SDHC node for WM8505
  ARM: dts: imx6q: clean up unused ipu2grp
  ARM: dts: silk: Add compatible property to "partitions" node
  ARM: dts: gose: Add compatible property to "partitions" node
  ARM: dts: porter: Add compatible property to "partitions" node
  ARM: dts: koelsch: Add compatible property to "partitions" node
  ARM: dts: lager: Add compatible property to "partitions" node
  ARM: dts: bockw: Add compatible property to "partitions" node
  ARM: dts: meson8b: Add watchdog node
  Documentation: watchdog: Add new bindings for meson8b
  ARM: meson: Add status LED for Odroid-C1
  ARM: dts: uniphier: fix a typo in comment block
  ARM: bcm2835: Add the auxiliary clocks to the device tree.
  ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
  ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
  ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
  ARM: realview: set up cache correctly on the PB11MPCore
  ARM: dts: Unify G2D device node with other devices on exynos4
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Updates for new platform support:

   - New platform: Tango4 from Sigma Designs.
   - Broadcom BCM2836 (Raspberry Pi 2 SoC)
   - Enable cpufreq on Freescale i.MX7D
   - Rockchip: SMP support for rk3036, general support for rk3228
   - SMP support on Broadcom Kona and NSP
   - Cleanups for OMAP removing legacy IOMMU data

  + a bunch of misc fixes and tweaks for various platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  ARM: tango: Fix UP build issues
  ARM: tango: pass ARM arch level for smc.S
  ARM: bcm2835: Add Kconfig support for bcm2836
  ARM: OMAP2+: Add support for dm814x and dra62x usb
  ARM: OMAP2+: Add mmc hwmod entries for dm814x
  ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
  ARM: OMAP2+: Fix SoC detection for dra62x j5-eco
  ARM: tango4: Initial platform support
  ARM: bcm2835: Add a compat string for bcm2836 machine probe
  dt-bindings: Add root properties for Raspberry Pi 2
  ARM: imx: select SRC for i.MX7
  ARM: uniphier: select PINCTRL
  ARM: OMAP2+: Remove device creation for omap-pcm-audio
  ARM: OMAP1: Remove device creation for omap-pcm-audio
  ARM: rockchip: enable support for RK3228 SoCs
  ARM: rockchip: use const and __initconst for rk3036 smp_operations
  ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER
  ARM: BCM: Add SMP support for Broadcom 4708
  ARM: BCM: Add SMP support for Broadcom NSP
  ARM: BCM: Clean up SMP support for Broadcom Kona
  ...

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "A smallish number of general cleanup commits this release cycle.  Some
  of these are minor tweaks:

   - shmobile change of binding for their GIC (using arm,pl390 now)
   - ARCH_RENESAS introduction
   - Misc other renesas updates

  There's also a couple of treewide commits from Masahiro Yamada
  cleaning up const/__initconst for SMP operation structs and a switch
  to using "depends on" instead of if-constructs on most of the Kconfig
  platform targets"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  staging: board: armadillo800eva: Use "arm,pl390"
  staging: board: kzm9d: Use "arm,pl390"
  ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC
  ARM: use "depends on" for SoC configs instead of "if" after prompt
  ARM/clocksource: use automatic DT probing for ux500 PRCMU
  ARM: use const and __initconst for smp_operations
  ARM: hisi: do not export smp_operations structures
  ARM: mvebu: remove unused mach/gpio.h
  ARM: shmobile: Remove legacy mach/irqs.h
  ARM: shmobile: Introduce ARCH_RENESAS
  MAINTAINERS: Remove link to oss.renesas.com which is closed

Pull non-urgent ARM SoC fixes from Olof Johansson:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - MAINTAINERS updates to add a list for brcmstb and fix a typo
   - A handful of fixes for OMAP 81xx, a recently resurrected platform
     so these can't be considered real regressions and thus got queued.
   - A couple of other small fixes for scoop, sa1100 and davinci"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
  ARM: sa1100/simpad: Be sure to clamp return value
  ARM: scoop: Be sure to clamp return value
  ARM: davinci: fix a problematic usage of WARN()
  ARM: davinci: only select WT cache if cache is enabled
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: dts: Fix dm814x entries for pllss and prcm
  MAINTAINERS: gpio-brcmstb: Remove stray '>'
  MAINTAINERS: brcmstb: Include Broadcom internal mailing-list

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree this time contains one series from Nicolas Pitre
  that makes the optimized do_div() implementation from the ARM
  architecture available to all architectures.

  This also adds stricter type checking for callers of do_div, which has
  uncovered a number of bugs in existing code, and fixes up the ones we
  have found"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ARM: asm/div64.h: adjust to generic codde
  __div64_32(): make it overridable at compile time
  __div64_const32(): abstract out the actual 128-bit cross product code
  do_div(): generic optimization for constant divisor on 32-bit machines
  div64.h: optimize do_div() for power-of-two constant divisors
  mtd/sm_ftl.c: fix wrong do_div() usage
  drm/mgag200/mgag200_mode.c: fix wrong do_div() usage
  hid-sensor-hub.c: fix wrong do_div() usage
  ti/fapll: fix wrong do_div() usage
  ti/clkt_dpll: fix wrong do_div() usage
  tegra/clk-divider: fix wrong do_div() usage
  imx/clk-pllv2: fix wrong do_div() usage
  imx/clk-pllv1: fix wrong do_div() usage
  nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Introduce configfs support for unlocked configfs_depend_item()
     (krzysztof + andrezej)
   - Conversion of usb-gadget target driver to new function registration
     interface (andrzej + sebastian)
   - Enable qla2xxx FC target mode support for Extended Logins (himansu +
     giridhar)
   - Enable qla2xxx FC target mode support for Exchange Offload (himansu +
     giridhar)
   - Add qla2xxx FC target mode irq affinity notification + selective
     command queuing.  (quinn + himanshu)
   - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
     nab)
   - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
     proper se_session->sess_kref + target_get_session() usage.  (hch +
     sagi + nab)
   - Fix long-standing race between se_node_acl->acl_kref get and
     get_initiator_node_acl() lookup.  (hch + nab)
   - Fix target/user block-size handling, and make sure netlink reaches
     all network namespaces (sheng + andy)

  Note there is an outstanding bug-fix series for remote I_T nexus port
  TMR LUN_RESET has been posted and still being tested, and will likely
  become post -rc1 material at this point"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
  scsi: qla2xxxx: avoid type mismatch in comparison
  target/user: Make sure netlink would reach all network namespaces
  target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
  target: Convert ACL change queue_depth se_session reference usage
  iscsi-target: Fix potential dead-lock during node acl delete
  ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Wait for command completion before freeing a session
  target: Fix a memory leak in target_dev_lba_map_store()
  target: Support aborting tasks with a 64-bit tag
  usb/gadget: Remove set-but-not-used variables
  target: Remove an unused variable
  target: Fix indentation in target_core_configfs.c
  target/user: Allow user to set block size before enabling device
  iser-target: Fix non negative ERR_PTR isert_device_get usage
  target/fcoe: Add tag support to tcm_fc
  qla2xxx: Check for online flag instead of active reset when transmitting responses
  qla2xxx: Set all queues to 4k
  qla2xxx: Disable ZIO at start time.
  qla2xxx: Move atioq to a different lock to reduce lock contention
  ...

Larry Finger reports:
 "My PowerBook G4 Aluminum with a 32-bit PPC processor fails to boot for
  the 4.4-git series".

This is likely due to X still needing /dev/mem access on this platform.

CONFIG_IO_STRICT_DEVMEM is not yet safe to turn on when
CONFIG_STRICT_DEVMEM=y.

Remove the default so that old configurations do not change behavior.

Fixes: 90a545e9 ("restrict /dev/mem to idle io memory ranges")
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: http://marc.info/?l=linux-kernel&m=145332012023825&w=2Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add/fix git URLs for various subsystems
Add git URL for at91
Add git URL for Rockchip
Add git URL for ARM64
Update git URL for ath6kl
Add git URL for backlight
Add git URL for chrome
Add git URL for cris
Add git URL for cryptodev
Update git URL for DLM
Add git URL for eCryptfs
Add git URL for ext4
Add git URL for hwspinlock
Add git URL for integrity
Add git URL for IPVS
Add git URL for nfsd
Add git URL for KVM/s390
Add git URL for kgdb
Add git URL for nvdimm
Add git URL for metag
Add git URL for wireless drivers
Add git URL for devicetree
Update git URL for PCMCIA
Update git URL for pstore
Update git URL for ath10k
Add git URL for hexagon
Add git URL for reset
Add git URL for s390
Fix tree format for SAMSUNG thermal
Add git URL for md
Add git URL for squashfs
Add git URL for swiotlb
Add git URL for xtensa
Fix tree format for TPM
Add git URL for UML
Add git URL for VFIO
Add git URL for vhost
Update git URL for XFS
Fix MIC maintainers entry
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>