As Tetsuo points out:
 "Commit 385386cf ("mm: vmstat: move slab statistics from zone to
  node counters") broke "Slab:" field of /proc/meminfo . It shows nearly
  0kB"

In addition to /proc/meminfo, this problem also affects the slab
counters OOM/allocation failure info dumps, can cause early -ENOMEM from
overcommit protection, and miscalculate image size requirements during
suspend-to-disk.

This is because the patch in question switched the slab counters from
the zone level to the node level, but forgot to update the global
accessor functions to read the aggregate node data instead of the
aggregate zone data.

Use global_node_page_state() to access the global slab counters.

Fixes: 385386cf ("mm: vmstat: move slab statistics from zone to node counters")
Link: http://lkml.kernel.org/r/20170801134256.5400-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.

 2) Fix stats handling in bcm_sysport_get_stats(), from Florian
    Fainelli.

 3) Reject 16777215 VNI value in geneve_validate(), from Girish
    Moodalbail.

 4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.

 5) Once a UFO fragmented frame is treated as UFO, we should continue
    doing so. Likewise once a frame has been segmented, we should
    continue doing that and not try to convert it to a UFO frame. From
    Willem de Bruijn.

 6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
    prevent races. From Willem de Bruijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  packet: fix tp_reserve race in packet_set_ring
  udp: consistently apply ufo or fragmentation
  net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
  igmp: Fix regression caused by igmp sysctl namespace code.
  geneve: maximum value of VNI cannot be used
  net: systemport: Fix software statistics for SYSTEMPORT Lite
  tipc: remove premature ESTABLISH FSM event at link synchronization

Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.

This bug was discovered by syzkaller.

Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.

Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.

Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.

A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.

Found by syzkaller.

Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sparc updates from David Miller:

 1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.

 2) Prevent crashes when bringing up sunvdc virtual block devices in
    some environments. From Jim Quigley.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
  sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
  sparc64: recognize and support sparc M8 cpu type
  sparc64: properly name the cpu constants

Commit 55917a21 ("netfilter: x_tables: add context to know if
extension runs from nft_compat") introduced a member nft_compat to
xt_tgchk_param structure.

But it didn't set it's value for ipt_init_target. With unexpected
value in par.nft_compat, it may return unexpected result in some
target's checkentry.

This patch is to set all it's fields as 0 and only initialize the
non-zero fields in ipt_init_target.

v1->v2:
  As Wang Cong's suggestion, fix it by setting all it's fields as
  0 and only initializing the non-zero fields.

Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file")
moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This
function is only called as part of per-namespace initialization, only if
CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is
compiled out, casuing the igmp pernet ops to not be registerd and those sysctl
being left initialized with 0. However, there are certain functions, such as
ip_mc_join_group which are always compiled and make use of some of those
sysctls. Let's do a partial revert of the aforementioned commit and move the
sysctl initialization into inet_init_net, that way they will always have
sane values.

Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range
of values for it would be from 0 to 16777215 (2^24 -1).  However, one
cannot create a geneve device with VNI set to 16777215. This patch fixes
this issue.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With SYSTEMPORT Lite we have holes in our statistics layout that make us
skip over the hardware MIB counters, bcm_sysport_get_stats() was not
taking that into account resulting in reporting 0 for all SW-maintained
statistics, fix this by skipping accordingly.

Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a link between two nodes come up, both endpoints will initially
send out a STATE message to the peer, to increase the probability that
the peer endpoint also is up when the first traffic message arrives.
Thereafter, if the establishing link is the second link between two
nodes, this first "traffic" message is a TUNNEL_PROTOCOL/SYNCH message,
helping the peer to perform initial synchronization between the two
links.

However, the initial STATE message may be lost, in which case the SYNCH
message will be the first one arriving at the peer. This should also
work, as the SYNCH message itself will be used to take up the link
endpoint before  initializing synchronization.

Unfortunately the code for this case is broken. Currently, the link is
brought up through a tipc_link_fsm_evt(ESTABLISHED) when a SYNCH
arrives, whereupon __tipc_node_link_up() is called to distribute the
link slots and take the link into traffic. But, __tipc_node_link_up() is
itself starting with a test for whether the link is up, and if true,
returns without action. Clearly, the tipc_link_fsm_evt(ESTABLISHED) call
is unnecessary, since tipc_node_link_up() is itself issuing such an
event, but also harmful, since it inhibits tipc_node_link_up() to
perform the test of its tasks, and the link endpoint in question hence
is never taken into traffic.

This problem has been exposed when we set up dual links between pre-
and post-4.4 kernels, because the former ones don't send out the
initial STATE message described above.

We fix this by removing the unnecessary event call.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using mpgroup to define multiple paths for a virtual disk causes multiple
virtual-device-port ports to be created for that virtual device.
Each virtual-device-port port then gets a vdisk created for it by the Linux
sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it
cannot handle multiple ports for a single vdisk, leading to a kernel panic
at startup.

This fix prevents more than one vdisk per virtual-device-port being created
until full virtual disk multipathing (mpgroup) support is implemented.
Signed-off-by: Jim Quigley <Jim.Quigley@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pin control fixes from Linus Walleij:
 "These are the pin control fixes I have gathered since the return from
  my vacation. They boiled in -next a while so let's get them in.

  Apart from the documentation build it is purely driver fixes. Which is
  nice. The Intel fixes seem kind of important.

   - Fix the documentation build as the docs were moved

   - Correct the UART pin list on the Intel Merrifield

   - Fix pin assignment and number of pins on the Marvell Armada 37xx
     pin controller

   - Cover the Setzer models in the Chromebook DMI quirk in the Intel
     cheryview driver so they start working

   - Add the missing "sim" function to the sunxi driver

   - Fix USB pin definitions on Uniphier Pro4

   - Smatch fix for invalid reference in the zx pin control driver"

* tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: generic: update references to Documentation/pinctrl.txt
  pinctrl: intel: merrifield: Correct UART pin lists
  pinctrl: armada-37xx: Fix number of pin in south bridge
  pinctrl: armada-37xx: Fix the pin 23 on south bridge
  pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk
  pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
  pinctrl: uniphier: fix USB3 pin assignment for Pro4
  pinctrl: zte: fix dereference of 'data' in zx_set_mux()

Commit 65d8fc77 ("futex: Remove requirement for lock_page() in
get_futex_key()") removed an unnecessary lock_page() with the
side-effect that page->mapping needed to be treated very carefully.

Two defensive warnings were added in case any assumption was missed and
the first warning assumed a correct application would not alter a
mapping backing a futex key.  Since merging, it has not triggered for
any unexpected case but Mark Rutland reported the following bug
triggering due to the first warning.

  kernel BUG at kernel/futex.c:679!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3
  Hardware name: linux,dummy-virt (DT)
  task: ffff80001e271780 task.stack: ffff000010908000
  PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
  LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
  pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145

The fact that it's a bug instead of a warning was due to an unrelated
arm64 problem, but the warning itself triggered because the underlying
mapping changed.

This is an application issue but from a kernel perspective it's a
recoverable situation and the warning is unnecessary so this patch
removes the warning.  The warning may potentially be triggered with the
following test program from Mark although it may be necessary to adjust
NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the
system.

    #include <linux/futex.h>
    #include <pthread.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <sys/mman.h>
    #include <sys/syscall.h>
    #include <sys/time.h>
    #include <unistd.h>

    #define NR_FUTEX_THREADS 16
    pthread_t threads[NR_FUTEX_THREADS];

    void *mem;

    #define MEM_PROT  (PROT_READ | PROT_WRITE)
    #define MEM_SIZE  65536

    static int futex_wrapper(int *uaddr, int op, int val,
                             const struct timespec *timeout,
                             int *uaddr2, int val3)
    {
        syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3);
    }

    void *poll_futex(void *unused)
    {
        for (;;) {
            futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1);
        }
    }

    int main(int argc, char *argv[])
    {
        int i;

        mem = mmap(NULL, MEM_SIZE, MEM_PROT,
               MAP_SHARED | MAP_ANONYMOUS, -1, 0);

        printf("Mapping @ %p\n", mem);

        printf("Creating futex threads...\n");

        for (i = 0; i < NR_FUTEX_THREADS; i++)
            pthread_create(&threads[i], NULL, poll_futex, NULL);

        printf("Flipping mapping...\n");
        for (;;) {
            mmap(mem, MEM_SIZE, MEM_PROT,
                 MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0);
        }

        return 0;
    }
Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c fixes from Wolfram Sang:
 "The main thing is to allow empty id_tables for ACPI to make some
  drivers get probed again. It looks a bit bigger than usual because it
  needs some internal renaming, too.

  Other than that, there is a fix for broken DSTDs, a super simple
  enablement for ARM MPS, and two documentation fixes which I'd like to
  see in v4.13 already"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rephrase explanation of I2C_CLASS_DEPRECATED
  i2c: allow i2c-versatile for ARM MPS platforms
  i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz
  i2c: designware: Print clock freq on invalid clock freq error
  i2c: core: Allow empty id_table in ACPI case as well
  i2c: mux: pinctrl: mention correct module name in Kconfig help text

Pull block fixes from Jens Axboe:
 "Three patches that should go into this release.

  Two of them are from Paolo and fix up some corner cases with BFQ, and
  the last patch is from Ming and fixes up a potential usage count
  imbalance regression due to the recent NOWAIT work"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed
  block, bfq: consider also in_service_entity to state whether an entity is active
  block, bfq: reset in_service_entity if it becomes idle

Pull crypto fixes from Herbert Xu:
 "Fix two regressions in the inside-secure driver with respect to
  hmac(sha1)"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: inside-secure - fix the sha state length in hmac_sha1_setkey
  crypto: inside-secure - fix invalidation check in hmac_sha1_setkey

Pull networking fixes from David Miller:
 "The pull requests are getting smaller, that's progress I suppose :-)

   1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi.

   2) Fix remote checksum handling in VXLAN and GUE tunneling drivers,
      from Koichiro Den.

   3) Missing u64_stats_init() calls in several drivers, from Florian
      Fainelli.

   4) TCP can set the congestion window to an invalid ssthresh value
      after congestion window reductions, from Yuchung Cheng.

   5) Fix BPF jit branch generation on s390, from Daniel Borkmann.

   6) Correct MIPS ebpf JIT merge, from David Daney.

   7) Correct byte order test in BPF test_verifier.c, from Daniel
      Borkmann.

   8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins.

   9) Handle SCTP checksums properly in mlx4 driver, from Davide
      Caratti.

  10) We can potentially enter tcp_connect() with a cached route
      already, due to fastopen, so we have to explicitly invalidate it.

  11) skb_warn_bad_offload() can bark in legitimate situations, fix from
      Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  net: avoid skb_warn_bad_offload false positives on UFO
  qmi_wwan: fix NULL deref on disconnect
  ppp: fix xmit recursion detection on ppp channels
  rds: Reintroduce statistics counting
  tcp: fastopen: tcp_connect() must refresh the route
  net: sched: set xt_tgchk_param par.net properly in ipt_init_target
  net: dsa: mediatek: add adjust link support for user ports
  net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets
  qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'
  hysdn: fix to a race condition in put_log_buffer
  s390/qeth: fix L3 next-hop in xmit qeth hdr
  asix: Fix small memory leak in ax88772_unbind()
  asix: Ensure asix_rx_fixup_info members are all reset
  asix: Add rx->ax_skb = NULL after usbnet_skb_return()
  bpf: fix selftest/bpf/test_pkt_md_access on s390x
  netvsc: fix race on sub channel creation
  bpf: fix byte order test in test_verifier
  xgene: Always get clk source, but ignore if it's missing for SGMII ports
  MIPS: Add missing file for eBPF JIT.
  bpf, s390: fix build for libbpf and selftest suite
  ...

skb_warn_bad_offload triggers a warning when an skb enters the GSO
stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL
checksum offload set.

Commit b2504a5d ("net: reduce skb_warn_bad_offload() noise")
observed that SKB_GSO_DODGY producers can trigger the check and
that passing those packets through the GSO handlers will fix it
up. But, the software UFO handler will set ip_summed to
CHECKSUM_NONE.

When __skb_gso_segment is called from the receive path, this
triggers the warning again.

Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On
Tx these two are equivalent. On Rx, this better matches the
skb state (checksum computed), as CHECKSUM_NONE here means no
checksum computed.

See also this thread for context:
http://patchwork.ozlabs.org/patch/799015/

Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan_disconnect is called twice when disconnecting devices with
separate control and data interfaces.  The first invocation will set
the interface data to NULL for both interfaces to flag that the
disconnect has been handled.  But the matching NULL check was left
out when qmi_wwan_disconnect was added, resulting in this oops:

  usb 2-1.4: USB disconnect, device number 4
  qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device
  BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
  IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan]
  PGD 0
  P4D 0
  Oops: 0000 [#1] SMP
  Modules linked in: <stripped irrelevant module list>
  CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G            E   4.12.3-nr44-normandy-r1500619820+ #1
  Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017
  Workqueue: usb_hub_wq hub_event [usbcore]
  task: ffff8c882b716040 task.stack: ffffb8e800d84000
  RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan]
  RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400
  RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8
  R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0
  Call Trace:
   ? usb_unbind_interface+0x71/0x270 [usbcore]
   ? device_release_driver_internal+0x154/0x210
   ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan]
   ? usbnet_disconnect+0x6c/0xf0 [usbnet]
   ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan]
   ? usb_unbind_interface+0x71/0x270 [usbcore]
   ? device_release_driver_internal+0x154/0x210
Reported-and-tested-by: Nathaniel Roach <nroach44@gmail.com>
Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp
devices") dropped the xmit_recursion counter incrementation in
ppp_channel_push() and relied on ppp_xmit_process() for this task.
But __ppp_channel_push() can also send packets directly (using the
.start_xmit() channel callback), in which case the xmit_recursion
counter isn't incremented anymore. If such packets get routed back to
the parent ppp unit, ppp_xmit_process() won't notice the recursion and
will call ppp_channel_push() on the same channel, effectively creating
the deadlock situation that the xmit_recursion mechanism was supposed
to prevent.

This patch re-introduces the xmit_recursion counter incrementation in
ppp_channel_push(). Since the xmit_recursion variable is now part of
the parent ppp unit, incrementation is skipped if the channel doesn't
have any. This is fine because only packets routed through the parent
unit may enter the channel recursively.

Finally, we have to ensure that pch->ppp is not going to be modified
while executing ppp_channel_push(). Instead of taking this lock only
while calling ppp_xmit_process(), we now have to hold it for the full
ppp_channel_push() execution. This respects the ppp locks ordering
which requires locking ->upl before ->downl.

Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 7e3f2952 ("rds: don't let RDS shutdown a connection
while senders are present"), refilling the receive queue was removed
from rds_ib_recv(), along with the increment of
s_ib_rx_refill_from_thread.

Commit 73ce4317 ("RDS: make sure we post recv buffers")
re-introduces filling the receive queue from rds_ib_recv(), but does
not add the statistics counter. rds_ib_recv() was later renamed to
rds_ib_recv_path().

This commit reintroduces the statistics counting of
s_ib_rx_refill_from_thread and s_ib_rx_refill_from_cq.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With new TCP_FASTOPEN_CONNECT socket option, there is a possibility
to call tcp_connect() while socket sk_dst_cache is either NULL
or invalid.

 +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4
 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0
 +0 connect(4, ..., ...) = 0

<< sk->sk_dst_cache becomes obsolete, or even set to NULL >>

 +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000

We need to refresh the route otherwise bad things can happen,
especially when syzkaller is running on the host :/

Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now xt_tgchk_param par in ipt_init_target is a local varibale,
par.net is not initialized there. Later when xt_check_target
calls target's checkentry in which it may access par.net, it
would cause kernel panic.

Jaroslav found this panic when running:

  # ip link add TestIface type dummy
  # tc qd add dev TestIface ingress handle ffff:
  # tc filter add dev TestIface parent ffff: u32 match u32 0 0 \
    action xt -j CONNMARK --set-mark 4

This patch is to pass net param into ipt_init_target and set
par.net with it properly in there.

v1->v2:
  As Wang Cong pointed, I missed ipt_net_id != xt_net_id, so fix
  it by also passing net_id to __tcf_ipt_init.
v2->v3:
  Missed the fixes tag, so add it.

Fixes: ecb2421b ("netfilter: add and use nf_ct_netns_get/put")
Reported-by: Jaroslav Aster <jaster@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manually adjust the port settings of user ports once PHY polling has
completed. This patch extends the adjust_link callback to configure the
per port PMCR register, applying the proper values polled from the PHY.
Without this patch flow control was not always getting setup properly.
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

if the NIC fails to validate the checksum on TCP/UDP, and validation of IP
checksum is successful, the driver subtracts the pseudo-header checksum
from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't
do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails.

V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: f8c6455b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull rdma fixes from Doug Ledford:
 "Third set of -rc fixes for 4.13 cycle

   - small set of miscellanous fixes

   - a reasonably sizable set of IPoIB fixes that deal with multiple
     long standing issues"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/hns: checking for IS_ERR() instead of NULL
  RDMA/mlx5: Fix existence check for extended address vector
  IB/uverbs: Fix device cleanup
  RDMA/uverbs: Prevent leak of reserved field
  IB/core: Fix race condition in resolving IP to MAC
  IB/ipoib: Notify on modify QP failure only when relevant
  Revert "IB/core: Allow QP state transition from reset to error"
  IB/ipoib: Remove double pointer assigning
  IB/ipoib: Clean error paths in add port
  IB/ipoib: Add get statistics support to SRIOV VF
  IB/ipoib: Add multicast packets statistics
  IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initialization
  IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qp
  IB/ipoib: Make sure no in-flight joins while leaving that mcast
  IB/ipoib: Use cancel_delayed_work_sync when needed
  IB/ipoib: Fix race between light events and interface restart

Allow any number of command line arguments to match either the
section header or the section contents and create new files.

Create MAINTAINERS.new and SECTION.new.

This allows scripting of the movement of various sections from
MAINTAINERS.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of reading STDIN and writing STDOUT, use specific filenames of
MAINTAINERS and MAINTAINERS.new.

Use hash references instead of global hash %hash so future modifications
can read and write specific hashes to split up MAINTAINERS into multiple
files using a script.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Section [A-Z]: patterns are not currently in any required sorting order.
Add a specific sorting sequence to MAINTAINERS entries.
Sort F: and X: patterns in alphabetic order.

The preferred section ordering is:

  SECTION HEADER
  M:	Maintainers
  R:	Reviewers
  P:	Named persons without email addresses
  L:	Mailing list addresses
  S:	Status of this section (Supported, Maintained, Orphan, etc...)
  W:	Any relevant URLs
  T:	Source code control type (git, quilt, etc)
  Q:	Patchwork patch acceptance queue site
  B:	Bug tracking URIs
  C:	Chat URIs
  F:	Files with wildcard patterns (alphabetic ordered)
  X:	Excluded files with wildcard patterns (alphabetic ordered)
  N:	Files with regex patterns
  K:	Keyword regexes in source code for maintainership identification

Miscellaneous perl neatening:

 - Rename %map to %hash, map has a different meaning in perl
 - Avoid using \& and local variables for function indirection
 - Use return for a little c like clarity
 - Use c-like function call style instead of &function
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow for MAINTAINERS to become a directory and if it is,
read all the files in the directory for maintained sections.

Optionally look for all files named MAINTAINERS in directories
excluding the .git directory by using --find-maintainer-files.

This optional feature adds ~.3 seconds of CPU on an Intel
i5-6200 with an SSD.

Miscellanea:

 - Create a read_maintainer_file subroutine from the existing code
 - Test only the existence of MAINTAINERS, not whether it's a file
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The openbmc mailing list is moderated for non-subscribers.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes: f47e07bc ("Fix up MAINTAINERS file problems")
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Two small fixes, one re-fix of a previous fix and five patches sorting
  out hotplug in the bnx2X class of drivers. The latter is rather
  involved, but necessary because these drivers have started dropping
  lockdep recursion warnings on the hotplug lock because of its
  conversion to a percpu rwsem"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sg: only check for dxfer_len greater than 256M
  scsi: aacraid: reading out of bounds
  scsi: qedf: Limit number of CQs
  scsi: bnx2i: Simplify cpu hotplug code
  scsi: bnx2fc: Simplify CPU hotplug code
  scsi: bnx2i: Prevent recursive cpuhotplug locking
  scsi: bnx2fc: Prevent recursive cpuhotplug locking
  scsi: bnx2fc: Plug CPU hotplug race

Fix the warning message on the parisc and IA64 architectures to show the
correct function name of the caller by using %pS instead of %pF. The
message is printed with the value of _RET_IP_ which calls
__builtin_return_address(0) and as such returns the IP address caller
instead of pointer to a function descriptor of the caller.

The effect of this patch is visible on the parisc and ia64 architectures
only since those are the ones which use function descriptors while on
all others %pS and %pF will behave the same.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: eecabf56 ("random: suppress spammy warnings about unseeded randomness")
Fixes: d06bfd19 ("random: warn when kernel uses unseeded randomness")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Xtensa fixes from Max Filippov:

 - use asm-generic instances of asm/param.h and asm/device.h instead of
   exact copies in arch/xtensa/include/asm;

 - fix build error for xtensa cores with aliasing WT cache: define cache
   flushing functions and copy_{to,from}_user_page;

 - add missing EXPORT_SYMBOLs for clear_user_highpage, copy_user_highpage,
   flush_dcache_page, local_flush_cache_range, local_flush_cache_page,
   csum_partial and csum_partial_copy_generic.

* tag 'xtensa-20170807' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: mm/cache: add missing EXPORT_SYMBOLs
  xtensa: don't limit csum_partial export by CONFIG_NET
  xtensa: fix cache aliasing handling code for WT cache
  xtensa: remove wrapper header for asm/param.h
  xtensa: remove wrapper header for asm/device.h

Pull MTD fixes from Brian Norris:
 "I missed getting these out for rc4, but here are some MTD fixes.

  Just NAND fixes (in both the core handling, and a few drivers). Notes
  stolen from Boris:

  Core fixes:

   - fix data interface setup for ONFI NANDs that do not support the SET
     FEATURES command

   - fix a kernel doc header

   - fix potential integer overflow when retrieving timing information
     from the parameter page

   - fix wrong OOB layout for small page NANDs

  Driver fixes:

   - fix potential division-by-zero bug

   - fix backward compat with old atmel-nand DT bindings

   - fix ->setup_data_interface() in the atmel NAND driver"

* tag 'for-linus-20170807' of git://git.infradead.org/linux-mtd:
  mtd: nand: atmel: Fix EDO mode check
  mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow
  mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
  mtd: nand: Fix a docs build warning
  mtd: nand: sunxi: fix potential divide-by-zero error
  nand: fix wrong default oob layout for small pages using soft ecc
  mtd: nand: atmel: Fix DT backward compatibility in pmecc.c

Pull xfs fixes from Darrick Wong:
 "I have a couple more bug fixes for you today:

   - fix memory leak when issuing discard

   - fix propagation of the dax inode flag"

* tag 'xfs-4.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Fix per-inode DAX flag inheritance
  xfs: Fix leak of discard bio

We allocate 'p_info->mfw_mb_cur' and 'p_info->mfw_mb_shadow' but we check
'p_info->mfw_mb_addr' instead of 'p_info->mfw_mb_cur'.

'p_info->mfw_mb_addr' is never 0, because it is initiliazed a few lines
above in 'qed_load_mcp_offsets()'.

Update the test and check the result of the 2 'kzalloc()' instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The synchronization type that was used earlier to guard the loop that
deletes unused log buffers may lead to a situation that prevents any
thread from going through the loop.

The patch deletes previously used synchronization mechanism and moves
the loop under the spin_lock so the similar cases won't be feasible in
the future.

Found by by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Volkov <avolkov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

On L3, the qeth_hdr struct needs to be filled with the next-hop
IP address.
The current code accesses rtable->rt_gateway without checking that
rtable is a valid address. The accidental access to a lowcore area
results in a random next-hop address in the qeth_hdr.
rtable (or more precisely, skb_dst(skb)) can be NULL in rare cases
(for instance together with AF_PACKET sockets).
This patch adds the missing NULL-ptr checks.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Fixes: 87e7597b qeth: Move away from using neighbour entries in qeth_l3_fill_header()
Signed-off-by: David S. Miller <davem@davemloft.net>