- 11 May, 2018 9 commits
-
-
Oscar Mateo authored
Sampler Dynamic Frequency Rebalancing (DFR) aims to reduce Sampler power by dynamically changing its clock frequency in low-throughput conditions. This patches enables it by default on Gen11. v2: Wrong operation to clear the bit (Praveen) v3: Rebased on top of the WA refactoring v4: Move to icl_init_clock_gating, since it's not a WA (Rodrigo) v5: C, not lisp (Chris) Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-3-git-send-email-oscar.mateo@intel.com
-
Oscar Mateo authored
Inherit workarounds from previous platforms that are still valid for Icelake. v2: GEN7_ROW_CHICKEN2 is masked v3: - Since it has been fixed already in upstream, removed the TODO comment about WA_SET_BIT for WaInPlaceDecompressionHang. - Squashed with this patch: drm/i915/icl: add icelake_init_clock_gating() from Paulo Zanoni <paulo.r.zanoni@intel.com> - Squashed with this patch: drm/i915/icl: WaForceEnableNonCoherent from Oscar Mateo <oscar.mateo@intel.com> - WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and applies to B0 as well. - WaPipeControlBefore3DStateSamplePattern WABB was being applied to ICL incorrectly. v4: - Wrap the commit message - s/dev_priv/p to please checkpatch v5: Rebased on top of the WA refactoring v6: Rebased on top of further whitelist registers refactoring (Michel) v7: Added WaRsForcewakeAddDelayForAck v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika) v9: - C, not lisp (Chris) - WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko) Signed-off-by: -
Mika Kuoppala authored
Not all architectures guarantee that uncached read will flush the write combining buffer. So marking it explicitly is recommended [1]. However we know the architecture we are operating on and can avoid wmb as the UC store will flush the wcb [2]. Omit the wmb() before invalidate as redudant. v2: squash combining and removal (Chris) v3: remove obsolete comments about posting reads (Chris) References: http://yarchive.net/comp/linux/write_combining.html [1] References: http://download.intel.com/design/PentiumII/applnots/24442201.pdf [2] Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180508124154.14586-1-mika.kuoppala@linux.intel.com
-
Chandra Konduru authored
This patch adds NV12 to list of supported formats for sprite plane. v2: Rebased (me) v3: Review comments by Ville addressed - Removed skl_plane_formats_with_nv12 and added NV12 case in existing skl_plane_formats - Added the 10bpc RGB formats v4: Addressed review comments from Clinton A Taylor "Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes" - Removed 10bit RGB formats added previously with NV12 series v5: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. Addressed review comments from Clinton A Taylor "Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes" - Previous version has 10bit RGB format removed from VLV formats by mistake. Fixing that in this version. Removed 10bit RGB formats added previously with NV12 series for SKL. v6: Addressed review comments by Ville Restricting the NV12 to BXT and PIPE A and B v7: Rebased (me) v8: Rebased (me) Restricting NV12 changes to BXT and KBL Restricting NV12 changes for plane 0 (overlay) v9: Rebased (me) v10: Addressed review comments from Maarten. Adding NV12 to skl_plane_formats itself. v11: Addressed review comments from Shashank Sharma v12: Addressed review comments from Shashank Sharma Made the condition in intel_sprite_plane_create simple and easy to read as suggested. v13: Adding reviewed by tag from Shashank Sharma Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" v14: Addressed review comments from Ville Added skl_planar_formats to include NV12 and a check skl_plane_has_planar in sprite create Added NV12 format to skl_mod_supported. These were review comments from Kristian Høgsberg <hoegsberg@gmail.com> v15: Added reviewed by from Juha-Pekka Heikkila v16: Rebased the series v17: Added all tiling under mod supported for NV12 Credits to Megha Aggarwal v18: Added RB by Maarten and Kristian v19: Addressed review comments from Maarten Made modification to skl_mod_supported Credits-to: Megha Aggarwal <megha.aggarwal@intel.com> Credits-to: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by:
Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by:
Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Chandra Konduru <chandra.konduru@intel.com> Signed-off-by:
Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by:
-
Chandra Konduru authored
This patch adds NV12 to list of supported formats for primary plane v2: Rebased (Chandra Konduru) v3: Rebased (me) v4: Review comments by Ville addressed Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats v5: Rebased (me) v6: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v7: Review comments by Ville addressed Restricting the NV12 for BXT and on PIPE A and B Rebased (me) v8: Rebased (me) Modified restricting the NV12 support for both BXT and KBL. v9: Rebased (me) v10: Addressed review comments from Maarten. Adding NV12 inside skl_primary_formats itself. v11: Adding Reviewed By tag from Shashank Sharma v12: Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" v13: Addressed review comments from Ville Added skl_pri_planar_formats to include NV12 and skl_plane_has_planar function to check for NV12 support on plane. Added NV12 format to skl_mod_supported. These were review comments from Kristian Høgsberg <hoegsberg@gmail.com> v14: Added reviewed by from Juha-Pekka Heikkila v15: Rebased the series v16: Added all tiling support under mod supported for NV12. Credits to Megha Aggarwal v17: Added RB by Maarten and Kristian v18: Review comments from Maarten addressed - Removing BROXTON support for NV12 due to WA826 v19: Addressed review comments from Maarten Make changes to skl_mod_supported Credits-to: Megha Aggarwal megha.aggarwal@intel.com Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by:
-
Chandra Konduru authored
This patch adds NV12 as supported format to intel_framebuffer_init and performs various checks. v2: -Fix an issue in checks added (Chandra Konduru) v3: rebased (me) v4: Review comments by Ville addressed Added platform check for NV12 in intel_framebuffer_init Removed offset checks for NV12 case v5: Addressed review comments by Clinton A Taylor This NV12 support only correctly works on SKL. Plane color space conversion is different on GLK and later platforms causing the colors to display incorrectly. Ville's plane color space property patch series in review will fix this issue. - Restricted the NV12 case in intel_framebuffer_init to SKL and BXT only. v6: Rebased (me) v7: Addressed review comments by Ville Restricting the NV12 to BXT for now. v8: Rebased (me) Restricting the NV12 changes to BXT and KBL for now. v9: Rebased (me) v10: NV12 supported by all GEN >= 9. Making this change in intel_framebuffer_init. This is part of addressing Maarten's review comments. Comment under v8 no longer applicable v11: Addressed review comments from Shashank Sharma v12: Adding Reviewed By from Shashank Sharma v13: Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" v14: Addressed review comments from Maarten. Add checks for fb width height for NV12 and fail the fb creation if check fails. Added reviewed by from Juha-Pekka Heikkila v15: Rebased the series v16: Setting the minimum value during fb creating to 16 as per Bspec for NV12. Earlier minimum was expected to be > 16. Now changed it to >=16. v17: Adding restriction to framebuffer_init - the fb width and height should be a multiplier of 4 v18: Added RB from Maarten. Included Maarten's review comments Dont allow CCS formats for fb creation of NV12 v19: Review comments from Maarten addressed - Removing BROXTON support for NV12 due to WA826 Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by:
-
Maarten Lankhorst authored
We skip src trunction/adjustments for NV12 case and handle the sizes directly. Without this, pipe fifo underruns are seen on APL/KBL. v2: For NV12, making the src coordinates multiplier of 4 v3: Moving all the src coords handling code for NV12 to skl_check_nv12_surface v4: Added RB from Mika v5: Rebased the series. Removed checks of mult of 4 in skl_update_scaler, Added NV12 condition in intel_check_sprite_plane where src x/w is being checked for mult of 2 for yuv planes. v6: Made changes to skl_check_nv12_surface as per WA#1106 Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Vidya Srinivas authored
Possible hang with NV12 plane surface formats. WA: When the plane source pixel format is NV12, the CHICKEN_PIPESL_* register bit 22 must be set to 1 and the render decompression must not be enabled on any of the planes in that pipe. v2: removed unnecessary POSTING_READ v3: Added RB from Maarten v4: Removed support for NV12 for BROXTON Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Maarten Lankhorst authored
The workaround was applied only to the primary plane, but is required on all planes. Iterate over all planes in the crtc atomic check to see if the workaround is enabled, and only perform the actual toggling in the pre/post plane update functions. Changes since v1: - Track active NV12 planes in a nv12_planes bitmask. (Ville) v2: Removing BROXTON support for NV12 due to WA826 Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 09 May, 2018 5 commits
-
-
Dhinakaran Pandiyan authored
Driver features data block has a boolean flag for PSR, use this to decide whether PSR should be enabled on a platform. The module parameter can still be used to override this. Note: The feature currently remains disabled by default for all platforms irrespective of what VBT says. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Chris Wilson authored
Prepare to allow the GuC submission to be run from underneath a hardirq timer context (and not just the current softirq context) as is required for fast preemption resets and context switches. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Prepare to allow the execlists submission to be run from underneath a hardirq timer context (and not just the current softirq context) as is required for fast preemption resets and context switches. Signed-off-by:
-
Chris Wilson authored
In igt_flush_test() we try to switch back to the kernel context, but we are only able to do so when we are called with struct_mutex held. More of my CI fallout from lockdep being temporarily suppressed :( Fixes: 4cdf65ce ("drm/i915/selftests: Return to kernel context after each test") Signed-off-by:
-
Chris Wilson authored
Calling mock_engine() calls i915_timeline_init() and that requires struct_mutex to be held as it adds itself to the global list of timelines. This error was introduced by commit a89d1f92 ("drm/i915: Split i915_gem_timeline into individual timelines") but the issue was masked in CI by the earlier lockdep spam. Fixes: a89d1f92 ("drm/i915: Split i915_gem_timeline into individual timelines") Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk
-
- 08 May, 2018 12 commits
-
-
Chris Wilson authored
CI noticed <4>[ 23.430701] ============================================ <4>[ 23.430706] WARNING: possible recursive locking detected <4>[ 23.430713] 4.17.0-rc4-CI-CI_DRM_4156+ #1 Not tainted <4>[ 23.430720] -------------------------------------------- <4>[ 23.430725] systemd-udevd/169 is trying to acquire lock: <4>[ 23.430732] (ptrval) (&(&timeline->lock)->rlock){....}, at: move_to_timeline+0x48/0x12c [i915] <4>[ 23.430888] but task is already holding lock: <4>[ 23.430894] (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915] <4>[ 23.430995] other info that might help us debug this: <4>[ 23.431002] Possible unsafe locking scenario: <4>[ 23.431007] CPU0 <4>[ 23.431010] ---- <4>[ 23.431013] lock(&(&timeline->lock)->rlock); <4>[ 23.431021] lock(&(&timeline->lock)->rlock); <4>[ 23.431028] *** DEADLOCK *** <4>[ 23.431036] May be due to missing lock nesting notation <4>[ 23.431044] 5 locks held by systemd-udevd/169: <4>[ 23.431049] #0: (ptrval) (&dev->mutex){....}, at: __driver_attach+0x42/0xe0 <4>[ 23.431065] #1: (ptrval) (&dev->mutex){....}, at: __driver_attach+0x50/0xe0 <4>[ 23.431078] #2: (ptrval) (&dev->struct_mutex){+.+.}, at: i915_gem_init+0xca/0x630 [i915] <4>[ 23.431174] #3: (ptrval) (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915] <4>[ 23.431271] #4: (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915] <4>[ 23.431369] stack backtrace: <4>[ 23.431377] CPU: 0 PID: 169 Comm: systemd-udevd Not tainted 4.17.0-rc4-CI-CI_DRM_4156+ #1 <4>[ 23.431385] Hardware name: Dell Inc. OptiPlex GX280 /0G8310, BIOS A04 02/09/2005 <4>[ 23.431394] Call Trace: <4>[ 23.431403] dump_stack+0x67/0x9b <4>[ 23.431411] __lock_acquire+0xc67/0x1b50 <4>[ 23.431421] ? ring_buffer_lock_reserve+0x154/0x3f0 <4>[ 23.431429] ? lock_acquire+0xa6/0x210 <4>[ 23.431435] lock_acquire+0xa6/0x210 <4>[ 23.431530] ? move_to_timeline+0x48/0x12c [i915] <4>[ 23.431540] _raw_spin_lock+0x2a/0x40 <4>[ 23.431634] ? move_to_timeline+0x48/0x12c [i915] <4>[ 23.431730] move_to_timeline+0x48/0x12c [i915] <4>[ 23.431826] __i915_request_submit+0xfa/0x280 [i915] <4>[ 23.431923] i915_request_submit+0x25/0x40 [i915] <4>[ 23.432024] i9xx_submit_request+0x11/0x140 [i915] <4>[ 23.432120] submit_notify+0x8d/0x124 [i915] <4>[ 23.432202] __i915_sw_fence_complete+0x81/0x250 [i915] <4>[ 23.432300] __i915_request_add+0x31c/0x7c0 [i915] <4>[ 23.432395] i915_gem_init+0x621/0x630 [i915] <4>[ 23.432476] i915_driver_load+0xbee/0x10b0 [i915] <4>[ 23.432485] ? trace_hardirqs_on_caller+0xe0/0x1b0 <4>[ 23.432566] i915_pci_probe+0x29/0x90 [i915] <4>[ 23.432574] pci_device_probe+0xa1/0x130 <4>[ 23.432582] driver_probe_device+0x306/0x480 <4>[ 23.432589] __driver_attach+0xb7/0xe0 <4>[ 23.432596] ? driver_probe_device+0x480/0x480 <4>[ 23.432602] ? driver_probe_device+0x480/0x480 <4>[ 23.432609] bus_for_each_dev+0x74/0xc0 <4>[ 23.432616] bus_add_driver+0x15f/0x250 <4>[ 23.432623] ? 0xffffffffa02d7000 <4>[ 23.432629] driver_register+0x52/0xc0 <4>[ 23.432635] ? 0xffffffffa02d7000 <4>[ 23.432642] do_one_initcall+0x58/0x370 <4>[ 23.432653] ? do_init_module+0x1d/0x1ea <4>[ 23.432660] ? rcu_read_lock_sched_held+0x6f/0x80 <4>[ 23.432667] ? kmem_cache_alloc_trace+0x282/0x2e0 <4>[ 23.432675] do_init_module+0x56/0x1ea <4>[ 23.432682] load_module+0x2435/0x2b20 <4>[ 23.432694] ? __se_sys_finit_module+0xd3/0xf0 <4>[ 23.432701] __se_sys_finit_module+0xd3/0xf0 <4>[ 23.432710] do_syscall_64+0x55/0x190 <4>[ 23.432717] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 23.432724] RIP: 0033:0x7fa780782839 <4>[ 23.432729] RSP: 002b:00007ffcea73e668 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 23.432738] RAX: ffffffffffffffda RBX: 0000561a472a4b30 RCX: 00007fa780782839 <4>[ 23.432745] RDX: 0000000000000000 RSI: 00007fa7804610e5 RDI: 000000000000000e <4>[ 23.432752] RBP: 00007fa7804610e5 R08: 0000000000000000 R09: 00007ffcea73e780 <4>[ 23.432758] R10: 000000000000000e R11: 0000000000000246 R12: 0000000000000000 <4>[ 23.432765] R13: 0000561a47296450 R14: 0000000000020000 R15: 0000561a472a4b30 but did not report it as an issue as it only occurred during the first module on boot. This is due to the removal of the distinct global timeline, and its separate lock class. So instead mark up the expected nesting. An alternative would be to define a separate lock class for the engine, but since we only expect to have a single point of nesting, we can avoid having multiple lock classes for the struct. Fixes: a89d1f92 ("drm/i915: Split i915_gem_timeline into individual timelines") Signed-off-by: -
Chris Wilson authored
The i915_flip* tracepoints are no longer in use since the removal of CS flip in commit 8b5d27b9 ("drm/i915: Remove intel_flip_work infrastructure") References: 8b5d27b9 ("drm/i915: Remove intel_flip_work infrastructure") Signed-off-by:
-
Chris Wilson authored
During request submission, we call the engine->schedule() function so that we may reorder the active requests as required for inheriting the new request's priority. This may schedule several tasklets to run on the local CPU, but we will need to schedule the tasklets again for the new request. Delay all the local tasklets until the end, so that we only have to process the queue just once. v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a superset of rcu_read_lock(). Signed-off-by:
-
Chris Wilson authored
When called from process context tasklet_schedule() defers itself to ksoftirqd. From experience this may cause unacceptable latencies of over 200ms in executing the submission tasklet, our goal is to reprioritise the HW execution queue and trigger HW preemption immediately, so disable bh over the call to schedule and force the tasklet to run afterwards if scheduled. v2: Keep rcu_read_lock() around for PREEMPT_RCU Signed-off-by:
-
Chris Wilson authored
As we flush each test and wait for idle before the next, also switch back to the kernel context. This helps limit the amount of collateral damage a test may cause by resetting to the default state each time (and also helps clean up temporaries used by the test). Signed-off-by:
-
Matthew Auld authored
Add some onion to populate_lr_context. v2: prefer err_unpin_ctx drop the fixes tag, worst case we just spew a warn before everything is cleaned up and balance is restored Signed-off-by:Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
igt_ctx_exec() expects that we retire all active requests/objects before completing, so that when we clean up the files afterwards they are ready to be freed. Before we do so, it is then prudent to ensure that we have indeed retired the GPU activity, raising an error if it fails. If we do not, we run the risk of triggering an assertion when freeing the object: __i915_gem_free_objects:4793 GEM_BUG_ON(i915_gem_object_is_active(obj)) Signed-off-by:
-
Chris Wilson authored
Pull igt_flush_test() out into its own library before copying and pasting the code for a third time. Signed-off-by:
-
Matthew Auld authored
Operating on a zero sized GEM userptr object will lead to explosions. Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") Testcase: igt/gem_userptr_blits/input-checking Signed-off-by:
-
Chris Wilson authored
When rescheduling a change of dependencies, they all need to be added to the same priolist (at least the ones on the same engine!). Since we likely want to move a batch of requests, keep the priolist around. v2: Throw in an assert to catch trivial errors quickly. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
lookup_priolist() no longer attaches the request into the priolist, it just returns the priolist for the given priority instead. Drop the unused parameter. Signed-off-by:
-
Chris Wilson authored
Unsafe module parameters are just that, unsafe. If the user is foolish enough to try them and the kernel breaks, they get to keep both pieces. Don't ask them to file a bug report if they broke it themselves. References: https://bugs.freedesktop.org/show_bug.cgi?id=106423 Fixes: d15d7538 ("drm/i915: Tune down init error message due to failure injection") Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
- 07 May, 2018 5 commits
-
-
Paulo Zanoni authored
This implements the "MG PLL Programming" sequence from our spec. The biggest problem was that the spec assumes real numbers, so we had to adjust some numbers and calculations due to the fact that the Kernel prefers to deal with integers. I recommend grabbing some coffee, a pen and paper before reviewing this patch. v2: - Correctly identify DP encoders after upstream change. - Small checkpatch issues. - Rebase. v3: - Try to impove the comment on the tdc_targetcnt calculation based on Manasi's feedback (Manasi). - Rebase. Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
Just use the hardcoded tables provided by our spec. v2: Rebase. v3: Clarify that 38.4 uses the 19.2 table (James). Reviewed-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Paulo Zanoni authored
HDMI mode DPLL programming on ICL is the same as CNL, so just reuse the CNL code. v2: - Properly detect HDMI crtcs. - Rebase after changes to the cnl function (clock * 1000). v3: - Add a comment to clarify why we treat 38.4 as 19.2 (James). Reviewed-by:
-
Paulo Zanoni authored
This commit introduces the definitions for the ICL clocks and adds the basic functions to the shared DPLL framework. It adds code for the Enable and Disable sequences for some PLLs, but it does not have the code to compute the actual PLL values, which are marked as TODO comments and should be introduced as separate commits. Special thanks to James Ausmus for investigating and fixing a bug with the placement of icl_unmap_plls_to_ports() function. v2: - Rebase around dpll_lock changes. v3: - The spec now says what the timeouts should be. - Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze the machine. - Checkpatch found a white space problem. - Small adjustments before upstreaming. v4: - Move the ICL checks out of the *map_plls_to_ports() functions (James) - Add extra encoder check (James) - Call icl_unmap_plls_to_ports() later (James) v5: - Rebase after the pll struct changes. v6: - Properly make the unmap function based on encoders_post_disable() with regarding to checks and iterators. - Address checkpatch comment on "min = max = x()". Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Imre Deak authored
Add documentation to gen9_set_dc_state() on what enabling a given DC state means and at what point HW/DMC actually enters/exits these states. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180417113147.25120-1-imre.deak@intel.com
-
- 04 May, 2018 9 commits
-
-
Chris Wilson authored
Ignore the tests looking at the innards of execlists and its submission tasklets on machines that don't support execlists! Signed-off-by:
-
Florent Flament authored
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by:
Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591Signed-off-by:
-
Tvrtko Ursulin authored
It is useful to see the priority as requests are coming in and completed status as requests are coming out of the GPU. To achieve this in a more readable way we need to abandon the common request_hw tracepoint class. Signed-off-by:
-
Chris Wilson authored
"An outstanding request must still be on an active ring somewhere" is only true if we haven't just been interrupted by the shrinker in the middle of allocating the request itself. (At the start of i915_request_alloc() we pin the context and prepare the GT for activity, marking it as active, and then try to allocate the request. If this allocation invokes the shrinker, we try to reclaim some space by calling i915_retire_requests() which may then be confused by the pre-reservation of active_requests.) <3>[ 125.472695] i915_retire_requests:1429 GEM_BUG_ON(list_empty(&i915->gt.active_rings)) <2>[ 125.472792] kernel BUG at drivers/gpu/drm/i915/i915_request.c:1429! <4>[ 125.472822] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI <4>[ 125.498764] Modules linked in: snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel btusb btrtl btbcm btintel cdc_ether snd_hda_codec_realtek bluetooth i915 snd_hda_codec_generic usbnet r8152 mii ecdh_generic lpc_ich mei_me snd_hda_intel snd_hda_codec mei snd_hwdep snd_hda_core snd_pcm prime_numbers <4>[ 125.498923] CPU: 0 PID: 1115 Comm: gem_exec_create Tainted: G U 4.17.0-rc3-gc49cbe0d1eb8-kasan_32+ #1 <4>[ 125.498955] Hardware name: GOOGLE Peppy/Peppy, BIOS MrChromebox 02/04/2018 <4>[ 125.499074] RIP: 0010:i915_retire_requests+0x3f2/0x590 [i915] <4>[ 125.499095] RSP: 0018:ffff88004e5dec40 EFLAGS: 00010282 <4>[ 125.499117] RAX: 0000000000000010 RBX: ffff8800458f0000 RCX: 0000000000000000 <4>[ 125.499140] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff880060c2f6f0 <4>[ 125.499164] RBP: ffff88004e5dee30 R08: ffffed000c185ee6 R09: ffffed000c185ee6 <4>[ 125.499187] R10: 0000000000000001 R11: ffffed000c185ee5 R12: ffff8800553da160 <4>[ 125.499210] R13: dffffc0000000000 R14: 0000000000000000 R15: ffff8800458faed0 <4>[ 125.499235] FS: 00007fe18f052980(0000) GS:ffff880065400000(0000) knlGS:0000000000000000 <4>[ 125.499262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 125.499282] CR2: 00007f01df11efb8 CR3: 00000000518d4001 CR4: 00000000000606f0 <4>[ 125.499304] Call Trace: <4>[ 125.499417] i915_gem_shrink+0x576/0xb50 [i915] <4>[ 125.499532] ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915] <4>[ 125.499561] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.499671] ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915] <4>[ 125.499782] ? i915_gem_shrinker_scan+0xc4/0x320 [i915] <4>[ 125.499889] i915_gem_shrinker_scan+0xc4/0x320 [i915] <4>[ 125.499997] ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915] <4>[ 125.500021] ? do_raw_spin_unlock+0x4f/0x240 <4>[ 125.500042] ? _raw_spin_unlock+0x29/0x40 <4>[ 125.500149] ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915] <4>[ 125.500177] shrink_slab.part.18+0x23e/0x8f0 <4>[ 125.500202] ? unregister_shrinker+0x1f0/0x1f0 <4>[ 125.500226] ? mem_cgroup_iter+0x379/0xcc0 <4>[ 125.500249] shrink_node+0xa7e/0x1180 <4>[ 125.500276] ? shrink_node_memcg+0x11f0/0x11f0 <4>[ 125.500297] ? __delayacct_freepages_start+0x38/0x80 <4>[ 125.500319] ? __is_insn_slot_addr+0xe3/0x1a0 <4>[ 125.500342] ? recalibrate_cpu_khz+0x10/0x10 <4>[ 125.500361] ? ktime_get+0xb2/0x140 <4>[ 125.500382] do_try_to_free_pages+0x2d3/0xe40 <4>[ 125.500407] ? allow_direct_reclaim.part.23+0x1e0/0x1e0 <4>[ 125.500429] ? shrink_node+0x1180/0x1180 <4>[ 125.500450] ? __read_once_size_nocheck.constprop.4+0x10/0x10 <4>[ 125.500476] try_to_free_pages+0x1af/0x560 <4>[ 125.500497] ? do_try_to_free_pages+0xe40/0xe40 <4>[ 125.500525] __alloc_pages_nodemask+0xadc/0x2130 <4>[ 125.500553] ? gfp_pfmemalloc_allowed+0x150/0x150 <4>[ 125.500654] ? i915_gem_do_execbuffer+0x219d/0x32e0 [i915] <4>[ 125.500678] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.500701] ? __debug_object_init+0x322/0xd90 <4>[ 125.500722] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.500827] ? i915_gem_do_execbuffer+0xdc2/0x32e0 [i915] <4>[ 125.500942] ? i915_request_alloc+0x5b5/0x13f0 [i915] <4>[ 125.500964] ? page_frag_free+0x170/0x170 <4>[ 125.500984] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.501008] new_slab+0x21d/0x5c0 <4>[ 125.501029] ___slab_alloc.constprop.35+0x322/0x3e0 <4>[ 125.501052] ? reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501074] ? __ww_mutex_lock.constprop.3+0x1104/0x2cf0 <4>[ 125.501097] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 125.501120] ? fs_reclaim_acquire+0x10/0x10 <4>[ 125.501138] ? lock_acquire+0x138/0x3c0 <4>[ 125.501156] ? lock_acquire+0x3c0/0x3c0 <4>[ 125.501176] ? reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501198] ? __slab_alloc.isra.27.constprop.34+0x3d/0x70 <4>[ 125.501219] __slab_alloc.isra.27.constprop.34+0x3d/0x70 <4>[ 125.501243] ? reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501265] __kmalloc_track_caller+0x313/0x350 <4>[ 125.501287] krealloc+0x62/0xb0 <4>[ 125.501305] reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501411] i915_gem_do_execbuffer+0x2040/0x32e0 [i915] <4>[ 125.501522] ? eb_relocate_slow+0xad0/0xad0 [i915] <4>[ 125.501544] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.501646] ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915] <4>[ 125.501755] ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915] <4>[ 125.501779] ? drm_dev_get+0x20/0x20 <4>[ 125.501803] ? __might_fault+0xea/0x1a0 <4>[ 125.501902] ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915] <4>[ 125.502012] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502116] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502218] i915_gem_execbuffer2_ioctl+0x3c5/0x770 [i915] <4>[ 125.502243] ? drm_dev_enter+0xe0/0xe0 <4>[ 125.502260] ? lock_acquire+0x138/0x3c0 <4>[ 125.502362] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502470] ? i915_gem_object_create.part.28+0x570/0x570 [i915] <4>[ 125.502575] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502680] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502702] drm_ioctl_kernel+0x151/0x200 <4>[ 125.502721] ? drm_ioctl_permit+0x2a0/0x2a0 <4>[ 125.502746] drm_ioctl+0x63a/0x920 <4>[ 125.502844] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502868] ? drm_getstats+0x20/0x20 <4>[ 125.502886] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.502919] do_vfs_ioctl+0x173/0xe90 <4>[ 125.502936] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.502957] ? ioctl_preallocate+0x170/0x170 <4>[ 125.502978] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.503002] ? retint_kernel+0x2d/0x2d <4>[ 125.503024] ksys_ioctl+0x35/0x60 <4>[ 125.503043] __x64_sys_ioctl+0x6a/0xb0 <4>[ 125.503061] do_syscall_64+0x97/0x400 <4>[ 125.503081] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 125.503101] RIP: 0033:0x7fe18e4f65d7 <4>[ 125.503116] RSP: 002b:00007ffe2ffc06a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 <4>[ 125.503145] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe18e4f65d7 <4>[ 125.503168] RDX: 00007ffe2ffc07f0 RSI: 0000000040406469 RDI: 0000000000000003 <4>[ 125.503191] RBP: 00007ffe2ffc07f0 R08: 0000000000000004 R09: 00007ffe2ffcf080 <4>[ 125.503215] R10: 000000000002c7de R11: 0000000000000246 R12: 0000000040406469 <4>[ 125.503238] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 <4>[ 125.503268] Code: e8 18 a0 c9 da 48 8b 35 25 3a 47 00 49 c7 c0 a0 3b 88 c0 b9 95 05 00 00 48 c7 c2 e0 49 88 c0 48 c7 c7 8d 3b 5d c0 e8 ee 7e db da <0f> 0b 48 89 ef e8 a4 26 f5 da e9 51 fe ff ff e8 8a 26 f5 da e9 <1>[ 125.503548] RIP: i915_retire_requests+0x3f2/0x590 [i915] RSP: ffff88004e5dec40 Fixes: 643b450a ("drm/i915: Only track live rings for retiring") Signed-off-by:
-
Chris Wilson authored
Following commit f773568b ("drm/i915: nuke the duplicated stolen discovery"), the if-else-chain for determining the GTT size is redundant with the !chv branches all being the same. Reported-by:
-
Andy Shevchenko authored
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Limit the arbitration (where preemption may occur) to inside the batch, and prevent it from happening on the pipecontrols/flushes we use to write the breadcrumb seqno. Once the user batch is complete, we have nothing left to do but serialise and emit the breadcrumb; switching contexts at this point is futile so don't. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180503195416.22498-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Don't pre-emptively retire the oldest request in our ring's list if it is the only request. We keep various bits of state alive using the active reference from the request and would rather transfer that state over to a new request rather than the more involved process of retiring and reacquiring it. Signed-off-by:
-
Chris Wilson authored
When userspace is passing around swapbuffers using DRI, we frequently have to open and close the same object in the foreign address space. This shows itself as the same object being rebound at roughly 30fps (with a second object also being rebound at 30fps), which involves us having to rewrite the page tables and maintain the drm_mm range manager every time. However, since the object still exists and it is only the local handle that disappears, if we are lazy and do not unbind the VMA immediately when the local user closes the object but defer it until the GPU is idle, then we can reuse the same VMA binding. We still have to be careful to mark the handle and lookup tables as closed to maintain the uABI, just allowing the underlying VMA to be resurrected if the user is able to access the same object from the same context again. If the object itself is destroyed (neither userspace keeping a handle to it), the VMA will be reaped immediately as usual. In the future, this will be even more useful as instantiating a new VMA for use on the GPU will become heavier. A nuisance indeed, so nip it in the bud. v2: s/__i915_vma_final_close/i915_vma_destroy/ etc. v3: Leave a hint as to why we deferred the unbind on close. Signed-off-by:
-
