- 18 Nov, 2017 40 commits
-
-
Victor Chibotaru authored
The flag enables Clang instrumentation of comparison operations (currently not supported by GCC). This instrumentation is needed by the new KCOV device to collect comparison operands. Link: http://lkml.kernel.org/r/20171011095459.70721-2-glider@google.comSigned-off-by:
Victor Chibotaru <tchibo@google.com> Signed-off-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: <syzkaller@googlegroups.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Victor Chibotaru authored
Enables kcov to collect comparison operands from instrumented code. This is done by using Clang's -fsanitize=trace-cmp instrumentation (currently not available for GCC). The comparison operands help a lot in fuzz testing. E.g. they are used in Syzkaller to cover the interiors of conditional statements with way less attempts and thus make previously unreachable code reachable. To allow separate collection of coverage and comparison operands two different work modes are implemented. Mode selection is now done via a KCOV_ENABLE ioctl call with corresponding argument value. Link: http://lkml.kernel.org/r/20171011095459.70721-1-glider@google.comSigned-off-by:
-
Andrey Ryabinin authored
__sanitizer_cov_trace_pc() is a hot code, so it's worth to remove pointless '!current' check. Current is never NULL. Link: http://lkml.kernel.org/r/20170929162221.32500-1-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Borislav Petkov authored
This is the gist of a patch which we've been forward-porting in our kernels for a long time now and it probably would make a good sense to have such TAINT_AUX flag upstream which can be used by each distro etc, how they see fit. This way, we won't need to forward-port a distro-only version indefinitely. Add an auxiliary taint flag to be used by distros and others. This obviates the need to forward-port whatever internal solutions people have in favor of a single flag which they can map arbitrarily to a definition of their pleasing. The "X" mnemonic could also mean eXternal, which would be taint from a distro or something else but not the upstream kernel. We will use it to mark modules for which we don't provide support. I.e., a really eXternal module. Link: http://lkml.kernel.org/r/20170911134533.dp5mtyku5bongx4c@pd.tnicSigned-off-by:
Borislav Petkov <bp@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Petr Mladek <pmladek@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Gargi Sharma authored
pidhash is no longer required as all the information can be looked up from idr tree. nr_hashed represented the number of pids that had been hashed. Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant, it has been renamed to pid_allocated and PIDNS_ADDING respectively. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.comSigned-off-by:
Gargi Sharma <gs051095@gmail.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> [ia64] Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Gargi Sharma authored
Patch series "Replacing PID bitmap implementation with IDR API", v4. This series replaces kernel bitmap implementation of PID allocation with IDR API. These patches are written to simplify the kernel by replacing custom code with calls to generic code. The following are the stats for pid and pid_namespace object files before and after the replacement. There is a noteworthy change between the IDR and bitmap implementation. Before text data bss dec hex filename 8447 3894 64 12405 3075 kernel/pid.o After text data bss dec hex filename 3397 304 0 3701 e75 kernel/pid.o Before text data bss dec hex filename 5692 1842 192 7726 1e2e kernel/pid_namespace.o After text data bss dec hex filename 2854 216 16 3086 c0e kernel/pid_namespace.o The following are the stats for ps, pstree and calling readdir on /proc for 10,000 processes. ps: With IDR API With bitmap real 0m1.479s 0m2.319s user 0m0.070s 0m0.060s sys 0m0.289s 0m0.516s pstree: With IDR API With bitmap real 0m1.024s 0m1.794s user 0m0.348s 0m0.612s sys 0m0.184s 0m0.264s proc: With IDR API With bitmap real 0m0.059s 0m0.074s user 0m0.000s 0m0.004s sys 0m0.016s 0m0.016s This patch (of 2): Replace the current bitmap implementation for Process ID allocation. Functions that are no longer required, for example, free_pidmap(), alloc_pidmap(), etc. are removed. The rest of the functions are modified to use the IDR API. The change was made to make the PID allocation less complex by replacing custom code with calls to generic API. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-2-git-send-email-gs051095@gmail.com [avagin@openvz.org: restore the old behaviour of the ns_last_pid sysctl] Link: http://lkml.kernel.org/r/20171106183144.16368-1-avagin@openvz.org Link: http://lkml.kernel.org/r/1507583624-22146-2-git-send-email-gs051095@gmail.comSigned-off-by:Oleg Nesterov <oleg@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Ola N. Kaldestad authored
Remove unnecessary else block, remove redundant return and call to kfree in if block. Link: http://lkml.kernel.org/r/1510238435-1655-1-git-send-email-mail@okal.noSigned-off-by:
Ola N. Kaldestad <mail@okal.no> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kangmin Park authored
Link: http://lkml.kernel.org/r/CAKW4uUyCi=PnKf3epgFVz8z=1tMtHSOHNm+fdNxrNw3-THvRCA@mail.gmail.comSigned-off-by:
Kangmin Park <l4stpr0gr4m@gmail.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: Alan Cox <alan@redhat.com> Signed-off-by:
-
Christophe JAILLET authored
In case of error, 'dma_map_sg()' returns 0, not a negative value. There is BUG_ON() in 'dma_map_sg_attrs()' which makes sure of that. Link: http://lkml.kernel.org/r/d4235bd2b9274e99f6c86ea71b1fa1c7bd8d0c08.1505687047.git.christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Christian K_nig <christian.koenig@amd.com> Signed-off-by:
-
Christophe JAILLET authored
drivers/rapidio/devices/rio_mport_cdev.c: fix resource leak in error handling path in 'rio_dma_transfer()' If 'dma_map_sg()', we should branch to the existing error handling path to free some resources before returning. Link: http://lkml.kernel.org/r/61292a4f369229eee03394247385e955027283f8.1505687047.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Arvind Yadav authored
rio_device_id are not supposed to change at runtime. rio driver is working with const 'id_table'. So mark the non-const rio_device_id structs as const. Link: http://lkml.kernel.org/r/1503734627-6058-2-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-3-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-4-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-5-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-6-git-send-email-arvind.yadav.cs@gmail.comSigned-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by:
Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by:
-
Dave Young authored
parse_crashkernel_mem() silently returns if we get zero bytes in the parsing function. It is useful for debugging to add a message, especially if the kernel cannot boot correctly. Add a pr_info instead of pr_warn because it is expected behavior for size = 0, eg. crashkernel=2G-4G:128M, size will be 0 in case system memory is less than 2G. Link: http://lkml.kernel.org/r/20171114080129.GA6115@dhcp-128-65.nay.redhat.comSigned-off-by:
Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy the thread group, today this is wrong in many ways. If nothing else, fatal_signal_pending() should always imply that the whole thread group (except ->group_exit_task if it is not NULL) is killed, this check breaks the rule. After the previous changes we can rely on sig_task_ignored(); sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want to kill this task and sig == SIGKILL OR it is traced and debugger can intercept the signal. This should hopefully fix the problem reported by Dmitry. This test-case static int init(void *arg) { for (;;) pause(); } int main(void) { char stack[16 * 1024]; for (;;) { int pid = clone(init, stack + sizeof(stack)/2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid > 0); assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0); assert(waitpid(-1, NULL, WSTOPPED) == pid); assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0); assert(syscall(__NR_tkill, pid, SIGKILL) == 0); assert(pid == wait(NULL)); } } triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in task_participate_group_stop(). do_signal_stop()->signal_group_exit() checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending() checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING. And his should fix the minor security problem reported by Kyle, SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the task is the root of a pid namespace. Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.comSigned-off-by:Kyle Huey <me@kylehuey.com> Reviewed-by:
-
Oleg Nesterov authored
Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only() signals even if force == T. This simplifies the next change and this matches the same check in get_signal() which will drop these signals anyway. Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.comSigned-off-by:
-
Oleg Nesterov authored
The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.comSigned-off-by:
-
Colin Ian King authored
The variable slots is being assigned a value of zero that is never read, slots is being updated again a few lines later. Remove this redundant assignment. Cleans clang warning: Value stored to 'slots' is never read Link: http://lkml.kernel.org/r/20171017140258.22536-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Christos Gkekas authored
Delete variables 'tree' and 'sb', which are set but never used. Link: http://lkml.kernel.org/r/1507977146-15875-1-git-send-email-chris.gekas@gmail.comSigned-off-by:
Christos Gkekas <chris.gekas@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Jeff Layton authored
It's never used in nilfs2. Link: http://lkml.kernel.org/r/1510064486-1728-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Ryusuke Konishi authored
Replace S_IRWXUGO with 0777 because symbolic permissions are considered harmful: https://lwn.net/Articles/696229/ Link: http://lkml.kernel.org/r/1509367935-3086-5-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
-
Ryusuke Konishi authored
Fix the following checkpatch warning: WARNING: Block comments should align the * on each line #633: FILE: sufile.c:633: +/** + * nilfs_sufile_truncate_range - truncate range of segment array Link: http://lkml.kernel.org/r/1509367935-3086-4-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nilfs_root.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Link: http://lkml.kernel.org/r/1509367935-3086-3-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
David Windsor <dwindsor@gmail.com> Reviewed-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
-
Andreas Rohner authored
There is a race condition between nilfs_dirty_inode() and nilfs_set_file_dirty(). When a file is opened, nilfs_dirty_inode() is called to update the access timestamp in the inode. It calls __nilfs_mark_inode_dirty() in a separate transaction. __nilfs_mark_inode_dirty() caches the ifile buffer_head in the i_bh field of the inode info structure and marks it as dirty. After some data was written to the file in another transaction, the function nilfs_set_file_dirty() is called, which adds the inode to the ns_dirty_files list. Then the segment construction calls nilfs_segctor_collect_dirty_files(), which goes through the ns_dirty_files list and checks the i_bh field. If there is a cached buffer_head in i_bh it is not marked as dirty again. Since nilfs_dirty_inode() and nilfs_set_file_dirty() use separate transactions, it is possible that a segment construction that writes out the ifile occurs in-between the two. If this happens the inode is not on the ns_dirty_files list, but its ifile block is still marked as dirty and written out. In the next segment construction, the data for the file is written out and nilfs_bmap_propagate() updates the b-tree. Eventually the bmap root is written into the i_bh block, which is not dirty, because it was written out in another segment construction. As a result the bmap update can be lost, which leads to file system corruption. Either the virtual block address points to an unallocated DAT block, or the DAT entry will be reused for something different. The error can remain undetected for a long time. A typical error message would be one of the "bad btree" errors or a warning that a DAT entry could not be found. This bug can be reproduced reliably by a simple benchmark that creates and overwrites millions of 4k files. Link: http://lkml.kernel.org/r/1509367935-3086-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This requires adding a pointer to hold the timer's target task, as the lifetime of sc_task doesn't appear to match the timer's task. Link: http://lkml.kernel.org/r/20171016235900.GA102729@beastSigned-off-by:
-
Joe Lawrence authored
Mikulas noticed in the existing do_proc_douintvec_minmax_conv() and do_proc_dopipe_max_size_conv() introduced in this patchset, that they inconsistently handle overflow and min/max range inputs: For example: 0 ... param->min - 1 ---> ERANGE param->min ... param->max ---> the value is accepted param->max + 1 ... 0x100000000L + param->min - 1 ---> ERANGE 0x100000000L + param->min ... 0x100000000L + param->max ---> EINVAL 0x100000000L + param->max + 1, 0x200000000L + param->min - 1 ---> ERANGE 0x200000000L + param->min ... 0x200000000L + param->max ---> EINVAL 0x200000000L + param->max + 1, 0x300000000L + param->min - 1 ---> ERANGE In do_proc_do*() routines which store values into unsigned int variables (4 bytes wide for 64-bit builds), first validate that the input unsigned long value (8 bytes wide for 64-bit builds) will fit inside the smaller unsigned int variable. Then check that the unsigned int value falls inside the specified parameter min, max range. Otherwise the unsigned long -> unsigned int conversion drops leading bits from the input value, leading to the inconsistent pattern Mikulas documented above. Link: http://lkml.kernel.org/r/1507658689-11669-5-git-send-email-joe.lawrence@redhat.comSigned-off-by:
Joe Lawrence <joe.lawrence@redhat.com> Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Reviewed-by:
-
Joe Lawrence authored
pipe_max_size is assigned directly via procfs sysctl: static struct ctl_table fs_table[] = { ... { .procname = "pipe-max-size", .data = &pipe_max_size, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &pipe_proc_fn, .extra1 = &pipe_min_size, }, ... int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf, size_t *lenp, loff_t *ppos) { ... ret = proc_dointvec_minmax(table, write, buf, lenp, ppos) ... and then later rounded in-place a few statements later: ... pipe_max_size = round_pipe_size(pipe_max_size); ... This leaves a window of time between initial assignment and rounding that may be visible to other threads. (For example, one thread sets a non-rounded value to pipe_max_size while another reads its value.) Similar reads of pipe_max_size are potentially racy: pipe.c :: alloc_pipe_info() pipe.c :: pipe_set_size() Add a new proc_dopipe_max_size() that consolidates reading the new value from the user buffer, verifying bounds, and calling round_pipe_size() with a single assignment to pipe_max_size. Link: http://lkml.kernel.org/r/1507658689-11669-4-git-send-email-joe.lawrence@redhat.comSigned-off-by: -
Joe Lawrence authored
round_pipe_size() contains a right-bit-shift expression which may overflow, which would cause undefined results in a subsequent roundup_pow_of_two() call. static inline unsigned int round_pipe_size(unsigned int size) { unsigned long nr_pages; nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; return roundup_pow_of_two(nr_pages) << PAGE_SHIFT; } PAGE_SIZE is defined as (1UL << PAGE_SHIFT), so: - 4 bytes wide on 32-bit (0 to 0xffffffff) - 8 bytes wide on 64-bit (0 to 0xffffffffffffffff) That means that 32-bit round_pipe_size(), nr_pages may overflow to 0: size=0x00000000 nr_pages=0x0 size=0x00000001 nr_pages=0x1 size=0xfffff000 nr_pages=0xfffff size=0xfffff001 nr_pages=0x0 << ! size=0xffffffff nr_pages=0x0 << ! This is bad because roundup_pow_of_two(n) is undefined when n == 0! 64-bit is not a problem as the unsigned int size is 4 bytes wide (similar to 32-bit) and the larger, 8 byte wide unsigned long, is sufficient to handle the largest value of the bit shift expression: size=0xffffffff nr_pages=100000 Modify round_pipe_size() to return 0 if n == 0 and updates its callers to handle accordingly. Link: http://lkml.kernel.org/r/1507658689-11669-3-git-send-email-joe.lawrence@redhat.comSigned-off-by: -
Joe Lawrence authored
Patch series "A few round_pipe_size() and pipe-max-size fixups", v3. While backporting Michael's "pipe: fix limit handling" patchset to a distro-kernel, Mikulas noticed that current upstream pipe limit handling contains a few problems: 1 - procfs signed wrap: echo'ing a large number into /proc/sys/fs/pipe-max-size and then cat'ing it back out shows a negative value. 2 - round_pipe_size() nr_pages overflow on 32bit: this would subsequently try roundup_pow_of_two(0), which is undefined. 3 - visible non-rounded pipe-max-size value: there is no mutual exclusion or protection between the time pipe_max_size is assigned a raw value from proc_dointvec_minmax() and when it is rounded. 4 - unsigned long -> unsigned int conversion makes for potential odd return errors from do_proc_douintvec_minmax_conv() and do_proc_dopipe_max_size_conv(). This version underwent the same testing as v1: https://marc.info/?l=linux-kernel&m=150643571406022&w=2 This patch (of 4): pipe_max_size is defined as an unsigned int: unsigned int pipe_max_size = 1048576; but its procfs/sysctl representation is an integer: static struct ctl_table fs_table[] = { ... { .procname = "pipe-max-size", .data = &pipe_max_size, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &pipe_proc_fn, .extra1 = &pipe_min_size, }, ... that is signed: int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf, size_t *lenp, loff_t *ppos) { ... ret = proc_dointvec_minmax(table, write, buf, lenp, ppos) This leads to signed results via procfs for large values of pipe_max_size: % echo 2147483647 >/proc/sys/fs/pipe-max-size % cat /proc/sys/fs/pipe-max-size -2147483648 Use unsigned operations on this variable to avoid such negative values. Link: http://lkml.kernel.org/r/1507658689-11669-2-git-send-email-joe.lawrence@redhat.comSigned-off-by: -
NeilBrown authored
Currently if the autofs kernel module gets an error when writing to the pipe which links to the daemon, then it marks the whole moutpoint as catatonic, and it will stop working. It is possible that the error is transient. This can happen if the daemon is slow and more than 16 requests queue up. If a subsequent process tries to queue a request, and is then signalled, the write to the pipe will return -ERESTARTSYS and autofs will take that as total failure. So change the code to assess -ERESTARTSYS and -ENOMEM as transient failures which only abort the current request, not the whole mountpoint. It isn't a crash or a data corruption, but having autofs mountpoints suddenly stop working is rather inconvenient. Ian said: : And given the problems with a half dozen (or so) user space applications : consuming large amounts of CPU under heavy mount and umount activity this : could happen more easily than we expect. Link: http://lkml.kernel.org/r/87y3norvgp.fsf@notabene.neil.brown.nameSigned-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Ian Kent <raven@themaw.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Masahiro Yamada authored
init/version.c has nothing to do with modules, so remove the <linux/modude.h>. Instead, include <linux/export.h> for EXPORT_SYMBOL_GPL. This cuts off a lot of unnecessary header parsing. Link: http://lkml.kernel.org/r/1505920984-8523-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Jason Baron authored
The use of ep_call_nested() in ep_eventpoll_poll(), which is the .poll routine for an epoll fd, is used to prevent excessively deep epoll nesting, and to prevent circular paths. However, we are already preventing these conditions during EPOLL_CTL_ADD. In terms of too deep epoll chains, we do in fact allow deep nesting of the epoll fds themselves (deeper than EP_MAX_NESTS), however we don't allow more than EP_MAX_NESTS when an epoll file descriptor is actually connected to a wakeup source. Thus, we do not require the use of ep_call_nested(), since ep_eventpoll_poll(), which is called via ep_scan_ready_list() only continues nesting if there are events available. Since ep_call_nested() is implemented using a global lock, applications that make use of nested epoll can see large performance improvements with this change. Davidlohr said: : Improvements are quite obscene actually, such as for the following : epoll_wait() benchmark with 2 level nesting on a 80 core IvyBridge: : : ncpus vanilla dirty delta : 1 2447092 3028315 +23.75% : 4 231265 2986954 +1191.57% : 8 121631 2898796 +2283.27% : 16 59749 2902056 +4757.07% : 32 26837 2326314 +8568.30% : 64 12926 1341281 +10276.61% : : (http://linux-scalability.org/epoll/epoll-test.c) Link: http://lkml.kernel.org/r/1509430214-5599-1-git-send-email-jbaron@akamai.comSigned-off-by:
Jason Baron <jbaron@akamai.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Salman Qazi <sqazi@google.com> Cc: Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Jason Baron authored
ep_poll_safewake() is used to wakeup potentially nested epoll file descriptors. The function uses ep_call_nested() to prevent entering the same wake up queue more than once, and to prevent excessively deep wakeup paths (deeper than EP_MAX_NESTS). However, this is not necessary since we are already preventing these conditions during EPOLL_CTL_ADD. This saves extra function calls, and avoids taking a global lock during the ep_call_nested() calls. I have, however, left ep_call_nested() for the CONFIG_DEBUG_LOCK_ALLOC case, since ep_call_nested() keeps track of the nesting level, and this is required by the call to spin_lock_irqsave_nested(). It would be nice to remove the ep_call_nested() calls for the CONFIG_DEBUG_LOCK_ALLOC case as well, however its not clear how to simply pass the nesting level through multiple wake_up() levels without more surgery. In any case, I don't think CONFIG_DEBUG_LOCK_ALLOC is generally used for production. This patch, also apparently fixes a workload at Google that Salman Qazi reported by completely removing the poll_safewake_ncalls->lock from wakeup paths. Link: http://lkml.kernel.org/r/1507920533-8812-1-git-send-email-jbaron@akamai.comSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Salman Qazi <sqazi@google.com> Signed-off-by:
-
Shakeel Butt authored
A userspace application can directly trigger the allocations from eventpoll_epi and eventpoll_pwq slabs. A buggy or malicious application can consume a significant amount of system memory by triggering such allocations. Indeed we have seen in production where a buggy application was leaking the epoll references and causing a burst of eventpoll_epi and eventpoll_pwq slab allocations. This patch opt-in the charging of eventpoll_epi and eventpoll_pwq slabs. There is a per-user limit (~4% of total memory if no highmem) on these caches. I think it is too generous particularly in the scenario where jobs of multiple users are running on the system and the administrator is reducing cost by overcomitting the memory. This is unaccounted kernel memory and will not be considered by the oom-killer. I think by accounting it to kmemcg, for systems with kmem accounting enabled, we can provide better isolation between jobs of different users. Link: http://lkml.kernel.org/r/20171003021519.23907-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
-
Masahiro Yamada authored
checkpatch.pl does not check missing blank line before module_*_driver. I want it to behave likewise for builtin_*_driver. Link: http://lkml.kernel.org/r/1505700081-12854-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Lines that end in an open bracket or open parenthesis are generally hard to follow. Lines following those ending with open parenthesis are also rarely aligned to that open parenthesis. Suggest not ending lines with '[' or '(' Link: http://lkml.kernel.org/r/8fd0b2b4a7482064254e37931eb9302a81d5aa2f.1508340786.git.joe@perches.comSigned-off-by:Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Joe Perches authored
So the line length check can be bypassed by its callers. Link: http://lkml.kernel.org/r/7de542c08a6e79f2ebe7c1416c9f403c23fdcc09.1508282823.git.joe@perches.comSigned-off-by:
Song Liu <songliubraving@fb.com> Tested-by:
-
Joe Perches authored
Some of the definitions are very long and can't be split into multiple lines because ctags is limited. Exempt these lines from the line length checks. See commit 25528213 ("tags: Fix DEFINE_PER_CPU expansions") for more details. Link: http://lkml.kernel.org/r/1508170320.6530.15.camel@perches.comSigned-off-by:
-
Joe Perches authored
There was code in checkpatch that allowed continuation printks to be used without KERN_CONT. Remove the continuation check and always require a KERN_<LEVEL>. Link: http://lkml.kernel.org/r/61980ef41d5b9b6543da1c49055042e0ab74d308.1507047008.git.joe@perches.comSigned-off-by:
-
Heinrich Schuchardt authored
void foo(int a) switch (a) { case 'h': fun1(); exit(1); default: } creates a warning "Possible switch case/default not preceded by break or fallthrough comment". exit( should be treated like return. Link: http://lkml.kernel.org/r/20170910154618.25819-1-xypron.glpk@gmx.deSigned-off-by:Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by:
-
Miles Chen authored
Current unnamed function definition argument does not include function pointer cases and it reports something like: WARNING: function definition argument 'void' should also have an identifier name +unsigned int (*dummy)(void); Support function pointers for unnamed function arguments Link: http://lkml.kernel.org/r/1505389925-31087-1-git-send-email-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Acked-by:
-
Yury Norov authored
find_bit functions are widely used in the kernel, including hot paths. This module tests performance of those functions in 2 typical scenarios: randomly filled bitmap with relatively equal distribution of set and cleared bits, and sparse bitmap which has 1 set bit for 500 cleared bits. On ThunderX machine: Start testing find_bit() with random-filled bitmap find_next_bit: 240043 cycles, 164062 iterations find_next_zero_bit: 312848 cycles, 163619 iterations find_last_bit: 193748 cycles, 164062 iterations find_first_bit: 177720874 cycles, 164062 iterations Start testing find_bit() with sparse bitmap find_next_bit: 3633 cycles, 656 iterations find_next_zero_bit: 620399 cycles, 327025 iterations find_last_bit: 3038 cycles, 656 iterations find_first_bit: 691407 cycles, 656 iterations [arnd@arndb.de: use correct format string for find-bit tests] Link: http://lkml.kernel.org/r/20171113135605.3166307-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20171109140714.13168-1-ynorov@caviumnetworks.comSigned-off-by:
Yury Norov <ynorov@caviumnetworks.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Clement Courbet <courbet@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
