The DM thin-pool target now must undo the changes performed during
pool_presuspend() so introduce presuspend_undo hook in target_type.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>

No point checking if the device is suspended if the current target
doesn't even implement .ioctl
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

As long as struct thin_c is in the list, anyone can grab a reference of
it.  Consequently, we must wait for the reference count to drop to zero
*after* we remove the structure from the list, not before.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Loading and saving millions of block mappings takes time.  We may as
well explain what's going on, and encourage people to use a larger
cache block size.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Safely allow the discard blocksize to be larger than the cache blocksize
by using the bio prison's range locking support.  This also improves
discard performance considerly because larger discards are issued to the
dm-cache device.  The discard blocksize was always intended to be
greater than the cache blocksize.  But until now it wasn't implemented
safely.

Also, by safely restoring the ability to have discard blocksize larger
than cache blocksize we're able to significantly reduce the memory used
for the cache's discard bitset.  Before, with a small discard blocksize,
the discard bitset could get quite large because its size is a function
of the discard blocksize and the origin device's size.  For example,
previously, using a 32KB cache blocksize with a 40TB origin resulted in
1280MB of incore memory use for the discard bitset!  Now, the discard
blocksize is scaled up accordingly to ensure the discard bitset is
capped at 2**14 bits, or 16KB.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This reverts commit d132cc6d because we
actually do want to allow the discard blocksize to be larger than the
cache blocksize.  Further dm-cache discard changes will make this
possible.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This reverts commit 64ab346a because we
actually do want to allow the discard blocksize to be larger than the
cache blocksize.  Further dm-cache discard changes will make this
possible.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Ranges will be placed in the same cell if they overlap.

Range locking is a prerequisite for more efficient multi-block discard
support in both the cache and thin-provisioning targets.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Before, if the user wanted sequential IO to be promoted to the cache
they'd have to set sequential_threshold to some nebulous large value.

Now, the user may easily disable sequential IO detection (and sequential
IO's implicit bypass of the cache) by setting sequential_threshold to 0.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Rather than maintaining a separate promote_threshold variable that we
periodically update we now use the hit count of the oldest clean
block.  Also add a fudge factor to discourage demoting dirty blocks.

With some tests this has a sizeable difference, because the old code
was too eager to demote blocks.  For example, device-mapper-test-suite's
git_extract_cache_quick test goes from taking 190 seconds, to 142
(linear on spindle takes 250).
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When creating new devices dm_sync_table() calls
synchronize_rcu_expedited(), causing _all_ pending RCU pointers to be
flushed. This causes a latency overhead that is especially noticeable
when creating lots of devices.

And all of this is pointless as there are no old maps to be
disconnected, and hence no stale pointers which would need to be
cleared up.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Annotate the map field with __rcu since this is a rcu pointer which is checked
by sparse.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The map field in 'struct mapped_device' is an rcu pointer. Use rcu_dereference()
while accessing it.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Also refactor some other bio_list erroring helpers.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Eliminate redundant should_error_unserviceable_bio check and error
loop.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Sort the cells in logical block order before processing each cell in
process_thin_deferred_cells().  This significantly improves the ondisk
layout on rotational storage, whereby improving read performance.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This use of direct submission in process_shared_bio() reduces latency
for submitting bios in the shared cell by avoiding adding those bios to
the deferred list and waiting for the next iteration of the worker.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This use of direct submission in process_prepared_mapping() reduces
latency for submitting bios in a cell by avoiding adding those bios to
the deferred list and waiting for the next iteration of the worker.

But this direct submission exposes the potential for a race between
releasing a cell and incrementing deferred set.  Fix this by introducing
dm_cell_visit_release() and refactoring inc_remap_and_issue_cell()
accordingly.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This avoids dropping the cell, so increases the probability that other
bios will collect within the cell, rather than being passed individually
to the worker.

Also add required process_cell and process_discard_cell error handling
wrappers and set associated pool-mode function pointers accordingly.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Purely cleanup of duplicated code, no functional change.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When processing a discard bio, if the block is already quiesced do the
discard immediately rather than adding the mapping to a list for the
next iteration of the worker thread.

Discarding a fully provisioned 100G thin volume with 64k block size goes
from 860s to 95s with this change.

Clearly there's something wrong with the worker architecture, more
investigation needed.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Introduce thin_merge so that any additional constraints from the data
volume may be taken into account when determing the maximum number of
sectors that can be issued relative to the specified logical offset.

This is particularly important if/when the data volume is layered ontop
of a more sophisticated device (e.g. dm-raid or some other DM target).
Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

These code changes do not introduce a functional change.

But bio_add_page() will never attempt to build up a bio larger than
queue_max_sectors().  Similarly, bio_get_nr_vecs() is also bound by
queue_max_sectors().  Therefore, there is no point in allowing
dm_merge_bvec() to answer "how many sectors can a bio have at this
offset?" with anything larger than queue_max_sectors().  Using
queue_max_sectors() rather than BIO_MAX_SECTORS serves to more
accurately convey the limits that are being imposed.

Also, use unlikely() to clarify the fact that the defensive code in
dm_merge_bvec() relative to max_size going negative shouldn't ever
happen -- if it does happen there is a bug in the block layer for
requesting larger than dm_merge_bvec()'s initial response for a given
offset.  Also, update a comment in dm_merge_bvec() relative to
max_hw_sectors_kb.  And fix empty newline whitespace.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Allows for filesystems to submit bios that are a factor of the thinp
blocksize, improving dm-thinp efficiency (particularly when the data
volume is RAID).

Also set io_min to max_sectors_kb if it is a factor of the thinp
blocksize.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Throttle IO based on the time it's taking the worker to do one loop.
There were reports of hung task timeouts occuring and it was observed
that the excessively long avgqu-sz (as reported by iostat) was
contributing to these hung tasks.

Throttling definitely helps dm-thinp perform better under heavy IO load
(without being detremental by being overzealous).  It reduces avgqu-sz
drastically, e.g.: from 60K to ~6K, and even as low as 150 once metadata
is cached by bufio, when dirty_ratio=5, dirty_background_ratio=2.  And
avgqu-sz stays at or below 30K even with dirty_ratio=20,
dirty_background_ratio=10.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Prefetch metadata at the start of the worker thread and then again every
128th bio processed from the deferred list.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Introduce the dm_tm_issue_prefetches interface.  If you're using a
non-blocking clone the tm will build up a list of requested blocks that
weren't in core.  dm_tm_issue_prefetches will request those blocks to be
prefetched.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This change is a prerequisite for allowing metadata to be prefetched.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Previously it was using a fixed sized hash table.  There are times
when very many concurrent cells are held (such as when processing a very
large discard).  When this happens the hash table performance becomes
very poor.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

These changes help keep metadata backed by dm-bufio in-core longer which
fixes reports of metadata churn in the face of heavy random IO workloads.

Before, bufio evicted all buffers older than DM_BUFIO_DEFAULT_AGE_SECS.
Having a device (e.g. dm-thinp or dm-cache) lose all metadata just
because associated buffers had been idle for some time is unfriendly.

Now, the user may now configure the number of bytes that bufio retains
using the 'retain_bytes' module parameter.  The default is 256K.

Also, the DM_BUFIO_WORK_TIMER_SECS and DM_BUFIO_DEFAULT_AGE_SECS
defaults were quite low so increase them (to 30 and 300 respectively).
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Converting over to using an rbtree eliminates a fixed 8MB allocation
from vmalloc space for the hash table.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The walk code was using a 'ro_spine' to hold it's locked btree nodes.
But this data structure is designed for the rolling lock scheme, and
as such automatically unlocks blocks that are two steps up the call
chain.  This is not suitable for the simple recursive walk algorithm,
which retraces its steps.

This code is only used by the persistent array code, which in turn is
only used by dm-cache.  In order to trigger it you need to have a
mapping tree that is more than 2 levels deep; which equates to 8-16
million cache blocks.  For instance a 4T ssd with a very small block
size of 32k only just triggers this bug.

The fix just places the locked blocks on the stack, and stops using
the ro_spine altogether.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Avoids normal IO racing with discard.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Commit 48cf06bc ("dm raid: add discard support for RAID levels 4, 5
and 6") did not properly handle missing metadata device(s).  A failing
read of the superblock causes the metadata and data devices to be
removed from the dev array in struct raid_set, setting references to
both devices to NULL.  configure_discard_support() nonetheless tries to
access the data dev unconditionally causing an oops.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The dm-raid superblock (struct dm_raid_superblock) is padded to 512
bytes and that size is being used to read it in from the metadata
device into one preallocated page.

Reading or writing this on a 512-byte sector device works fine but on
a 4096-byte sector device this fails.

Set the dm-raid superblock's size to the logical block size of the
metadata device, because IO at that size is guaranteed too work.  Also
add a size check to avoid silent partial metadata loss in case the
superblock should ever grow past the logical block size or PAGE_SIZE.

[includes pointer math fix from Dan Carpenter]
Reported-by: "Liuhua Wang" <lwang@suse.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

The shrinker uses gfp flags to indicate what kind of operation can the
driver wait for. If __GFP_IO flag is present, the driver can wait for
block I/O operations, if __GFP_FS flag is present, the driver can wait on
operations involving the filesystem.

dm-bufio tested for __GFP_IO. However, dm-bufio can run on a loop block
device that makes calls into the filesystem. If __GFP_IO is present and
__GFP_FS isn't, dm-bufio could still block on filesystem operations if it
runs on a loop block device.

The change from __GFP_IO to __GFP_FS supposedly fixes one observed (though
unreproducible) deadlock involving dm-bufio and loop device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Fix a potential struct stripe_c leak that would occur if the
chunk_size exceeded the maximum allowed by dm_set_target_max_io_len
(UINT_MAX).  However, in practice there is no possibility of this
occuring given that chunk_size is of type uint32_t.  But it is good to
fix this to future-proof in case dm_set_target_max_io_len's
implementation were to change.
Signed-off-by: Pavitra Kumar <pavitrak@nvidia.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

If cn_add_callback() fails in dm_ulog_tfr_init(), it does not
deallocate prealloced memory but calls cn_del_callback().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

When __scan frees the required number of buffer entries that the
shrinker requested (nr_to_scan becomes zero) it must return.  Before
this fix the __scan code exited only the inner loop and continued in the
outer loop -- which could result in reduced performance due to extra
buffers being freed (e.g. unnecessarily evicted thinp metadata needing
to be synchronously re-read into bufio's cache).

Also, move dm_bufio_cond_resched to __scan's inner loop, so that
iterating the bufio client's lru lists doesn't result in scheduling
latency.
Reported-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.2+