- 20 Feb, 2012 11 commits
-
-
Marcel Holtmann authored
Since neither High Speed (HS) nor Low Energy (LE) are fully implemented yet, only expose them in supported settings when enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The management interface on the HCI control channel should be restricted to applications with CAP_NET_ADMIN permission. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The HCI monitor channel can be used to monitor all packets and events from the Bluetooth subsystem. The monitor is not bound to any specific HCI device and allows even capturing multiple devices at the same time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The HCI notifier handling was never used outside of Bluetooth core layer and thus remove it and replace it with direct function calls. Also move the stack internal event generation into the HCI socket layer. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Any HCI raw socket gets a copy of each SKB that is either received or send via the Bluetooth subsystem. The raw socket uses SKB clones to send out data, but the problem is that it needs to add an extra packet type byte in front of it. And some drivers need to also add an extra header before submitting the packet. So far this all worked magically fine since all of the drivers and the raw sockets are adding the same byte at the same location. But that is by pure coincidence. Since the data of cloned SKBs is shared, this means that the raw socket and driver kept writing into the shared data area. To fix this the only safe way is if the HCI raw socket creates a copy of the SKB before sending it out. To not always copy all SKBs around, the copy is only created once and only after any of the HCI filter checks succeeded. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The HCI socket bind handling checks a few too many times the channel we are binding. So centralize this and make the function easier to read. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The HCI CMSG specific data is for raw sockets only. So only add them to actual raw sockets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When reading the HCI raw socket option, the socket was never locked. So lock the socket and in addition return EINVAL on non raw sockets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Currently the socket options of HCI sockets can be set on raw and control sockets, but on control sockets they make no sense. So just return EINVAL in that case. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The bt_cb(skb)->channel was only needed to make hci_send_to_sock() be used for HCI raw and control sockets. Since they have now separate sending functions this is no longer needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The sending functions for HCI raw and control sockets have nothing in common except that they iterate over the socket list. Split them into two so they can do their job more efficient. In addition the code becomes more readable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 19 Feb, 2012 12 commits
-
-
Johan Hedberg authored
The hci_connect function should either return a valid hci_conn pointer or a ERR_PTR() but never NULL. This patch fixes the two places where hci_conn_add failures would have caused a NULL return. The only reason for failure with hci_conn_add is memory allocation so ENOMEM seems to be a good choice here. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch bumps the mgmt version to 1 and resets the revision to 0. This is in order to indicate API stability to user space. The mgmt API has reached a point where no major backwards incompatible changes are expected so it makes sense to do this version bump now. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The response to the Add/Remove Out Of Band Data commands should include the same address as was given in the command itself. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The same address as was passed to the (Un)Block Device command should also be returned in the command response message. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The same address type that was passed to the Start Discovery command should also be returned in the response message. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch fixes the status in Pair Device responses to follow proper mgmt status values. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Instead of having status paramters part of each individual command response it's simpler to just have the status as part of the command complete header. This patch updates the code to follow this convention and thereby also ensures compliance with the latest mgmt API specification. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
In accordance to the latest mgmt API specification the opcode comes first and then the status. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Andre Guedes authored
This patch adds interleaved discovery support to MGMT Start Discovery command. In case interleaved discovery is not supported (not a dual mode device), we perform BR/EDR or LE-only discovery according to the device capabilities. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andre Guedes authored
This patch merges DISCOVERY_INQUIRY and DISCOVERY_LE_SCAN states into a new state called DISCOVERY_FINDING. From the discovery perspective, we are pretty much worried about to know just if we are finding devices than what exactly phase of "finding devices" (inquiry or LE scan) we are currently running. Besides, to know if the controller is performing inquiry or LE scan we should check HCI_INQUIRY or HCI_LE_SCAN bits in hdev flags. Moreover, merging this two states will simplify the discovery state machine and will keep interleaved discovery implementation simpler. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andre Guedes authored
This patch adds to struct discovery_state the field 'type' so that we can track the discovery type the device is performing. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andre Guedes authored
This patch does some code refactoring in start_discovery function in order to prepare it for interleaved discovery support. MGMT_ADDR_* macros were moved to hci_core.h since they are now used to define discovery type macros. Discovery type macros were defined according to mgmt-api.txt specification: Possible values for the Type parameter are a bit-wise or of the following bits: 1 BR/EDR 2 LE Public 3 LE Random By combining these e.g. the following values are possible: 1 BR/EDR 6 LE (public & random) 7 BR/EDR/LE (interleaved discovery) Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 17 Feb, 2012 12 commits
-
-
Johan Hedberg authored
This patch adds the appropriate Intel copyright to mgmt files. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The latest mgmt API includes an address type for all messages containing an address. This patch updates the confirm name command to match this. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The latest mgmt API includes address types for all messages containing an address. This patch updates the PIN code messages to match this. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The latest mgmt API includes an address type wherever there's an address present. This patch updates the link key messages to match it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Andrei Emeltchenko authored
Several hex numbers were printed without object name which complicates debugging. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andrei Emeltchenko authored
Use state_to_string function in debug statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andrei Emeltchenko authored
Function state_to_string will be used in other files in debug statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Joe Perches authored
Use specific logging functions instead of a generic bt_printk function can save some text. Remove now unused bt_printk function. Add compatibility BT_INFO and BT_ERR macros. (compiled x86 and defconfig with bluetooth and all bluetooth drivers) $ size net/bluetooth/built-in.o* text data bss dec hex filename 381662 20072 100416 502150 7a986 net/bluetooth/built-in.o.allyesconfig.new 382463 20072 100400 502935 7ac97 net/bluetooth/built-in.o.allyesconfig.old 126635 1388 132 128155 1f49b net/bluetooth/built-in.o.defconfig.new 127175 1388 132 128695 1f6b7 net/bluetooth/built-in.o.defconfig.old $ size drivers/bluetooth/built-in.o* 127575 8976 29476 166027 2888b drivers/bluetooth/built-in.o.allyesconfig.new 129512 8976 29516 168004 29044 drivers/bluetooth/built-in.o.allyesconfig.old 52998 3292 156 56446 dc7e drivers/bluetooth/built-in.o.defconfig.new 54358 3292 156 57806 e1ce drivers/bluetooth/built-in.o.defconfig.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
The Set SSP mgmt command can be used for enabling and disabling Secure Simple Pairing support for controllers that support it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The Set Link Security mgmt command is used to enable or disable link level security, also known as Security Mode 3. This is rarely enabled in modern systems but the command needs to be available for completeness, qualification purposes and those few systems that actually want to enable it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
For simple integer errors the variable name "err" is more consistent with the existing code base than "ret". Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The val member of cmd_lookup isn't used anywhere so it can be removed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
- 16 Feb, 2012 2 commits
-
-
Andrei Emeltchenko authored
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.gitJohan Hedberg authored
Conflicts: include/net/bluetooth/l2cap.h net/bluetooth/hci_conn.c net/bluetooth/l2cap_core.c
-
- 15 Feb, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
-
Pavel Roskin authored
Rate control algorithms are supposed to stop processing when they encounter a rate with the index -1. Checking for rate->count not being zero is not enough. Allowing a rate with negative index leads to memory corruption in ath_debug_stat_rc(). One consequence of the bug is discussed at https://bugzilla.redhat.com/show_bug.cgi?id=768639Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Driver maintains different flags for WEP, WPA, WPA2 security modes. Appropriate flag is set using security information provided in connect request. mwifiex_is_network_compatible() routine uses them to check if driver's setting is compatible with AP. Association is aborted if the routine fails. For some corner cases, it is observed that association is failed even for valid security information based on association history. This patch fixes the problem by clearing previous security setting during each association. We should set WEP key provided in connect request as default tx key. This missing change is also added here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-