- 06 Sep, 2019 40 commits
-
-
Shaul Triebitz authored
A few functions were receiving the iwl_cfg struct directly, but we will also need other parts of the trans, so pass the trans (which includes the cfg) to them. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Add a pointer to the iwl_trans structure and point it to the trans part of the cfg. This is the first step in disassociating the trans configuration from the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Instead of accessing the iwl_config_trans_params from the cfg that is stored in the trans struct, pass this structure directly to functions that need it during trans_alloc. This will be useful to isolate the elements needed during allocation and pass them separately before the actual cfg struct is known. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Instead of setting the cfg to iwl_trans already during allocation, set it only later when we have had the time to decide which cfg to use. This is part of the effort to be able to decide the cfg based on HW revision and RF ID after iwl_trans_alloc() has been called. For now, since we still have a bunch of code checking the HW revision and the RF ID, we set iwl_trans->cfg early, even before we decided the real cfg to use. We only use the trans configuration at this point, so this is fine for now. In the future, the trans configuration will be completely independent from the rest of the config structure, so we'll be able to avoid this. Additionally, we can't access the PRPH registers in iwl_trans_alloc() anymore, so move the HW REV C-step check for family 8000 code later to the probe function as well. This step is probably not necessary, but if that's the case it should be removed separately later on. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
There were a couple of special handling to find the correct cfg inside iwl_trans_pcie_alloc(). Move them to iwl_pci_probe() so they're together with the rest of the decisions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Instead of using iwl_trans->cfg in iwl_trans_pcie_alloc(), use the local argument that we received. This will allow us to not to set the cfg during iwl_trans_alloc() so it can be decided later. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Make a static regions ops array and use it instead of switch case when determining what op to use to collect a region. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Needed for future changes. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Needed for future changes. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Avoid iterating over dump TLVs twice for size calculation by using linked list to store the dump TLVs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
separate configuration flows and dump collection flows. make ini configuration flows be in iwl-dbg-tlv.c and dump related flows in dbg.c to better reflect their logical difference. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Tova Mussai authored
Can't rely that band 2.4 is always supported by the NIC and use the first channel in this band for the phy ctxt. Instead, look for the first channel in the first band that is supported Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Tova Mussai authored
In case of Ultra-high-band (UHB), need to allocate nvm data structure in size of UHB channels array. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used once and relies mostly on IWL_DEVICE_22000_COMMON anyway. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Align wrt log prints to the driver coding style Remove the ext field from the log and print it at the beginning of the apply point. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Debug flow TLV was removed from the FW. Remove the TLV from the driver as well. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Reimplement debug TLV allocation flow. The driver will check the validity of the debug TLVs prior allocating space for them. Any malformed or unsupported TLV will be skipped. The TLV specific checks will be added in later patches. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
use iwl_trans_dbg_ini_valid function instead of a boolean value check if dbg_ini mode is on. It is needed for a future patch. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with IWL_22000_QU_B_HR_B_FW_PRE. Remove the former to avoid confusion. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Start supporting API version 50 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Johannes Berg authored
The real name is struct iwl_tof_range_req_ext_cmd, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Gil Adam authored
TX power limits as defined in the OTP assume the worst case scenario in terms of the platform's atenna gain, but most platforms are below that value so they can use more TX power without passing the regulatory limit. If the platform indicates in the BIOS that it indeed has lower gain, and the geographic location allows it, higher TX power can be used. The driver reads the PPAG (Per-Platform Antenna Gain) data from BIOS (if it exists), validates it and sends the appropriate command to the FW. This flow happens once at FW init, in case of suspend/resume there is no need to read again from BIOS as we save those values during init, so just send the PPAG command again to FW. Signed-off-by: Gil Adam <gil.adam@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
The check is not necessary anymore, because now the struct is not allocated separately, but is part of the mvmsta struct. Remove the check, since it's dead code. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
Any firmware that supports the new channel switch flow is able to close / re-open the queues when needed. It takes into account the channel switch mode etc... Don't open / close the queues or enable / disable beacon abort before and after the channel switch in case the firmware is able to do this by itself. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Christoph Hellwig authored
dma_alloc_coherent is not just the page allocator. The only valid arguments to pass are either GFP_ATOMIC or GFP_ATOMIC with possible modifiers of __GFP_NORETRY or __GFP_NOWARN. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
periphery phy and aux regions should not be collected like periphery mac region. Remove their handling. The handling will be added in the future once the FW will support it. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 7a14c23d ("iwlwifi: dbg: dump data according to the new ini TLVs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Use a linked list to maintain the debug TLVs instead of a single buffer. This way, the driver does not need to iterate over the binary file twice and allocates smaller chunks of memory. Also, in case one allocation fails the driver will work with the partial configuration instead of aborting the entire debug configuration. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Maintain DRAM debug buffer status in trans instead of keeping it as part of the TLVs buffer to avoid allocating extra space for it. Needed for future changes. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Add debug HW periphery registers to 9000 device family. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Haim Dreyfuss authored
regdb_ptrs is not in used anymore, remove it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
align the naming to iwl_dbg_tlv_* Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Ayala Beker authored
Function iwl_mvm_scan_set_legacy_probe_req() second argument size is too large to be passed by value. Fix it to be passed by reference. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
This means: 1) stop calling pm_runtime_resume when starting the hardware 2) removing the unneeded low_power parameter to start / stop hw / fw transport ops 3) squashing transport functions that are now the same _iwl_trans_pcie_start_hw / iwl_trans_pcie_start_hw Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
Those are now effectless. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
CMD_SEND_IN_IDLE, CMD_MAKE_TRANS_IDLE and CMD_WAKE_UP_TRANS are not used. Remove them. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
This code is now stale Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
Remove the now unneeded functions that called those from the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
This is always set to IWL_PLAT_PM_MODE_DISABLED Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Alex Malamud authored
During D3 state, FW may send packets. As a result, "write" queue pointer will be incremented by FW. Upon resume from D3, driver should adjust its shadows of "write" and "read" pointers to the value reported by FW. 1. Keep TID used during wowlan configuration. 2. Upon resume, set driver's "write" and "read" queue pointers to the value reported by FW. Signed-off-by: Alex Malamud <alex.malamud@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-