- 16 May, 2014 2 commits
-
-
- 15 May, 2014 5 commits
-
-
Johannes Berg authored
If DVM or MVM are built-in but LEDS_CLASS isn't then the current Kconfig will enable LED support and fail the build. Fix this by making the LED support depend on LEDS_CLASS being built-in or, if it is modular, only enabling it if iwlwifi also is. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Liad Kaufman authored
In the 8000 HW family the register for forcing an NMI has changed, so this allows to still be able to force an NMI while taking into account the HW in order to write to the correct register. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Reviewed-by:
-
Luciano Coelho authored
Instead of having two nearly identical functions to send the mac context commands, use a single way that can handle both the p2p and !p2p cases. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Reviewed-by:
-
Emmanuel Grumbach authored
The firmware needs to know on what channel we run before we set the association bit in the MAC context. Change a bit the flow to achieve this. Signed-off-by: -
Matt Chen authored
Some APs (e.g. TP-LINK TL-WA801N) are disabling aggregation (downlink to station) when U-APSD is enabled, resulting in low throughput. Add a module parameter to allow disabling U-APSD support in the driver. Also re-enable U-APSD for -9 firmware since the firmare issues were fixed in this release. There are devices that won't support U-APSD even with newer firmware, so bring the TLV flag back to detect those. Signed-off-by:
Matt Chen <matt.chen@intel.com> Signed-off-by:
-
- 14 May, 2014 1 commit
-
-
Eran Harary authored
New transport need to configure internal memory based on the data in the (enlarged) alive notification from the firmware. Add a transport API for this. Signed-off-by:
Eran Harary <eran.harary@intel.com> Signed-off-by:
-
- 13 May, 2014 32 commits
-
-
Jahnavi Meher authored
Signed-off-by:
Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The struct cfg80211_chan_def contains additional info to derive the bandwidth and side-band information of the chanspec. This patch adds chandef_to_chanspec() function used in IBSS join and starting AP operation. Reviewed-by:
Franky Lin <frankyl@broadcom.com> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The device is queried about the usability of channels, but it did not take 80MHz channels into consideration. This patch adds processing those chanspecs and clear the NO_80MHZ flag for those control/primary channels. Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function does not provide any additional functionality and is used only once so just get rid of it. Reviewed-by:
-
Arend van Spriel authored
By default allow 80Mhz in custom regulatory rules of the 5G band so the channels will not be flagged with N0_80MHZ. Reviewed-by:
-
Arend van Spriel authored
Although brcmfmac support several 11ac devices it did not advertise VHT related information to cfg80211. Reviewed-by:
-
Arend van Spriel authored
The channel values used by firmware is handled using conversion functions depending on the type of chip. These functions were already in place but lacked proper support for 80MHz channel definitions. This patch adds the support for that. Reviewed-by:
-
Arend van Spriel authored
In the .start_ap callback cfg80211_get_chandef_type() was used to provide debug log info. However, this causes a warning when the chandef contains VHT channel with 80MHz bandwidth. Avoid the warning by just printing the channel and bandwidth instead. Reviewed-by:
-
Daniel Kim authored
The DISASSOC command needs to be sent to firmware when a connection loss is detected by firmware (e.g., beacon timeout). Otherwise the next connect request fails due to a lingering LINK(down) event from firmware. This patch resolves the issue by using brcmf_link_down() handler, instead of the incomplete duplicated codes. Reviewed-by:
-
Arend van Spriel authored
The driver serializes the nvram firmware file before sending it to the device. This patch enhances this to assure serialized data is properly formatted and provide warnings on syntax failures. Reviewed-by:
-
Hante Meuleman authored
FWS is always queuing frames and using a worker for de-queueing, this is not always efficient for all bus layer. For example SDIO has an internal queue and worker making the queueing of FWS unnecessary. Make it possible to bypass the worker if fws mode is none using a bus interface configuration. For USB bus layer this configuration is set true to have fws provide queueing regardless the fws mode. Reviewed-by:
-
Hante Meuleman authored
Tracking and handling of 802.1x frames is done in two modules, it is more logical and clear to move this to dhd_linux module. Reviewed-by:
-
Hante Meuleman authored
In tx_finalize the hdrpull is performed. For the new protocol msgbuf this is complex, because it does not use protocol headers in front of payload anymore and therefor can not determine interface index in the hdr pulll operation. Move out the hdrpull operation from tx_finalize to make msgbuf implementation easier. Reviewed-by:
-
Daniel Kim authored
Currently firmware roaming support is not reported to cfg80211. This patch reports the support of firmware based roaming when it is enabled. Reviewed-by:
-
Daniel Kim authored
When a BSS provides both 2.4GHz and 5GHz bands, in many cases it makes sense to choose 5GHz. Typically a 5GHz channel is less crowded and has less interference and therefore its performance will be better than a crowded 2.4 GHz channel. This patch configures 'join_pref' to induce firmware to preferably select 5GHz BSS. Reviewed-by:
-
Oleksij Rempel authored
Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
and use it. This move need changes in both drivers. Signed-off-by:
-
Oleksij Rempel authored
to fix compile errors Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Rafał Miłecki authored
This adds choice submenu "Supported bus types" as two simple bool configs would allow user to compile b43 without any bus support (prety useless). Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Users of new (BCMA based) wireless chipsets may not want to enable SSB. This is hopefully the last code patch for dropping SSB dependency. Signed-off-by:
-
Ondrej Zary authored
The check of ezusb_firmware_download() return value (added by commit 488ec878) is broken because ezusb_firmware_download() returns 1 on success. This causes the driver not to work with the following error: orinoco_usb: probe of 3-3:1.0 failed with error -14 Check the return value only for negative values. This fix should be applied to -stable kernels too. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Zefir Kurtisi authored
Systems with multiple DFS channel detectors need to track timestamp of previous pulse per instance to display the correct pulse interval. Since the interval value is used for debug printing only, this is a non-functional modification. Signed-off-by:
Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by:
-
Helmut Schaa authored
Originally Helmut posted a v2 of the "ath9k: Allow platform override without EEPROM override", but I had prematurely commited the original as commit 552a5157. This commit restores the tree to what Helmut intended with his v2 submission. -- JWL Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Adam Lee authored
The msi module parameter offers an option to enable or disable MSI interrupts mode, for debugging and workaround(in case) convenience. Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
-
Adam Lee authored
The msi module parameter offers an option to enable or disable MSI interrupts mode. For now, some users report RTL8188EE works only with MSI on their certain platforms, some others report it works only without MSI, this parameter will help. Signed-off-by:
-
