Field rsn_enabled included in wpa_status struct is declared as
unsigned int but it is only be set using 0 and 1 values and
in conditional if code is just being used as a boolean. Change
its type to be a boolean.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comments which say the same as the code are not useful at all
so just remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit avoid two checkpatch script complains about
two long lines.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In ks_wlan_translate_scan function there are two preprocessor
definitions:

    - RSN_INFO_ELEM_ID
    - GENERIC_INFO_ELEM_ID

These can be moved to common ks_wlan.h because they can be used
in get_current_ap function instead of use hardcoded values.
GENERIC_INFO_ELEM_ID has been renamed to WPA_INFO_ELEM_ID which
is more clear.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of use memcpy to copy ethernet addresses use
ether_addr_copy created for that.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

New three functions have been created to centralice and simplify
calls related with set MIB requests:

    - hostif_mib_set_request_int
    - hostif_mib_set_request_bool
    - hostif_mib_set_request_ostring

Using these in different calls simplify functions related with
this mainly when types are bool and int because no more conversions
are needed in the caller functions. Those conversion details are
now located in the new helpers improving a lot readability. Calls
in hostif_sme_set_wep function has change also some if's to check
invalid value first avoiding one level indentation.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes parameter types to use enum mib_attribute, enum
mib_data_type and size_t for size instead of unsigned short. It also
reorder them in a more sense way. Code is updated in different
calls to use new parameters order using 'size' auxiliar local variables
in some of them to improve readability a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes some type cast in rate related preprocessor
definitions included in ks_hostif header file to use preferred
u8 type.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit just change some preprocessor definitions related
with MIB attributes into an enumeration which is much cleaner
for this here. Also add kerneldoc to avoid long comment lines.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit just change some preprocessor definitions related
with MIB data types into an enumeration which is much cleaner
for this here.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit cleans code for the event SME_MIC_FAILURE_REQUEST
changing if logic to handle invalid value first and using a
local variable.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Header file ks_wlan.h has a lot of nonsense comments along
the different declarations included on it. Most of them are
just the same as the variable name. Just remove them all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local variable event in ks_wlan_hw_rx function is declared
as unsigned short and can be declared as u16 which is preferred
style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Event to send to init the card are always the same so change
code to be more readable putting them into an array and
enqueuing also using a for loop.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Declaration of second parameter 'event' in ks_hostif .h and .c
file is different using uint16_t and unsigned short respectively.
Just unify both using 'u16' which is preferred instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local variable 'byte' in ks7010_sdio_init_irqs is declared as
unsigned char and can be declared as u8 which is preferred.
It is being used in calls to ks7010_sdio_writeb which is already
expected an u8.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local variables 'status', 'rsize' and 'byte' are declared as
unsigned char and can be declared as u8 which is preferred.
They are being used in ks7010_sdio_readb calls which is already
expected an u8.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local variable 'byte' in ks7010_rw_function is declared as unsigned
char and can be declared as u8 which is preferred. It is being used
in ks7010_sdio_readb which is already expecting an u8.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local variable 'byte' in _ks_wlan_hw_power_save function is declared
as unsigned char and can be declared as u8 which is preferred. It
is being using with ks7010_sdio_readb which expects u8 already.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parameter buffer in write_to_device function is declared as
a pointer to unsigned char and can be declared as an u8 type
which is preferred. Internally it calls to ks7010_sdio_write
which is using also u8 as parameter type. Update calls to this
function as well.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 92c1552c removes WPS hardcoded
definition and its related conditional preprocessor code. There
was some missing stuff already in this files. Remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit avoids a long line changing a bit message in
_ks_wlan_hw_power_save function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ks_wlan_private struct has a pointer to struct ks_sdio_card in its
fields. Because of that a forward declaration in needed in ks_wlan.h
header and also it makes necessary to have ks_sdio_card public in
a ks7010_sdio.h header. Changing this pointer into a void pointer
makes no longer necessary to have ks7010_sdio.h header as well as
removes the forward dependency in ks_wlan.h. Declaration of
ks_sdio_card has been moved to ks7010_sdio.c source file and To make
code cleaner inside this file a new ks7010_to_func function has been
added. The code has been updated to this changes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are some definitions for rx and tx queues in ks7010_sdio
which is not the best place to put them. Changing them into the
ks_wlan header file there is no need to explicity include ks7010_sdio.h
which makes no sense at all and can be resolved easily using
forward declarations. The functions related with the queues circular
buffers have been moved also into this header.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Fix up the all of the staging ks7010 files to have a proper SPDX
identifier, based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

Extra GPL text wording can be removed as it is no longer needed at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial fix to spelling mistakes in message text and comments

"dismatch" -> "mismatch"
"Inviation" -> "Invitation"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Several of the wlan-ng header files had C++-style SPDX comments. Fixed
checkpatch warnings by replacing with C-style comments, as per the
kernel docs.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning due to line break after '(', leaving an over 80
character warning due to long macro name.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning for missing parameter name for function
prototype.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed format/style issues found with checkpatch. No code changes.
Corrected alignment of variables after open parenthesis and line breaks.
Checkpatch now returns clean except for "line over 80 char" warnings.
Signed-off-by: Efstratios Gavas <xtrat@elg.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sm750 driver in staging has no future as new framebuffer driver
will not be added to fbdev anymore. A drm driver is being prepared, and
the details added to the TODO file. This sm750fb driver will be removed
as soon as the drm driver is ready. Also, remove my old email.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An issue is observed where mallocs are failing due to overcommit failure.
The failure happens when there is high ION page pool since ION page
pool is not considered reclaimable by the overcommit calculation code.
This change considers ion pool pages as indirectly reclaimable and thus
accounted as available memory in the overcommit calculation.
Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In keys_fill, the key_set_version could be changed after
the keys are filled, then the keys in this context won't
be refilled by the following lu_context_refill for its
version is equal to the current key_set_version.

In lu_context_refill, the key_set_version should be protected
before comparing it to version stored in the lu_context.
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8346
Reviewed-on: https://review.whamcloud.com/26099
Reviewed-on: https://review.whamcloud.com/27448
Reviewed-on: https://review.whamcloud.com/27994Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hoist lu_keys_guard locking out of the for loop in lu_context_exit().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8918
Reviewed-on: https://review.whamcloud.com/24217Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most of the time, keys are never changed. So rwlock might be
better for the concurrency of key read.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Gu Zheng <gzheng@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6800
Reviewed-on: http://review.whamcloud.com/15558Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cmid will be destroyed at OFED if kiblnd_cm_callback return error.
if error happen before the end of kiblnd_connect_peer, it will touch
destroyed cmid and fail as
(o2iblnd_cb.c:1315:kiblnd_connect_peer())
            ASSERTION( cmid->device != ((void *)0) ) failed:
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10015Reviewed-by: Alexey Lyashkov <c17817@cray.com>
Reviewed-by: Doug Oucharek <dougso@me.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Doug Oucharek <dougso@me.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The FastReg support in ko2iblnd was not unmapping pool items
causing the items to leak.  In addition, the mapping code
is not growing the pool like we do with FMR.

This patch makes sure we are unmapping FastReg pool elements
when we are done with them.  It also makes sure the pool
will grow when we depleat the pool.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9472
Reviewed-on: https://review.whamcloud.com/27015Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Doug Oucharek <dougso@me.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In ll_dir_ioctl(), the object lumv3 is firstly copied from the user space
using Its address, i.e., lumv1 = &lumv3. If the lmm_magic field of lumv3 is
LOV_USER_MAGIC_V3, lumv3 will be modified by the second copy from the user
space. The second copy is necessary, because the two versions (i.e.,
lov_user_md_v1 and lov_user_md_v3) have different data formats and lengths.
However, given that the user data resides in the user space, a malicious
user-space process can race to change the data between the two copies. By
doing so, the attacker can provide a data with an inconsistent version,
e.g., v1 version + v3 data. This can lead to logical errors in the
following execution in ll_dir_setstripe(), which performs different actions
according to the version specified by the field lmm_magic.

This patch rechecks the version field lmm_magic in the second copy.  If the
version is not as expected, i.e., LOV_USER_MAGIC_V3, an error code will be
returned: -EINVAL.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rather than storing the name of a namespace in the
hash table, store it directly in the namespace.
This will allow the hashtable to be changed to use
rhashtable.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <andreas.dilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename 'WILC_WFI_band_2ghz' to avoid mixedcase for variable name.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>