Skip to content

L
linux
Switch branch/tag
  1. 31 Dec, 2018 10 commits
  3. 28 Dec, 2018 7 commits
  5. 27 Dec, 2018 2 commits
  7. 25 Dec, 2018 3 commits
  9. 22 Dec, 2018 1 commit
  11. 21 Dec, 2018 4 commits
  13. 20 Dec, 2018 1 commit
  15. 18 Dec, 2018 7 commits
    • Imre Deak's avatar
      drm/i915/icl: Add fallback detection method for TypeC legacy ports · 2a041c97
      Imre Deak authored 
      Add a fallback detection method for TypeC legacy ports in case the
VBT port information used to detect normally such ports is
incorrect.

For the fallback method we use the TypeC legacy mode specific HPD
interrupt flag which should only be raised for a legacy port.

WARN if the VBT port info is incorrect.

In a case where we'd detect the port in a contradicting way both as a
legacy and also as a USB DP and/or TBT alternate port treat the port
as legacy (by also emitting a WARN from icl_update_tc_port_type).

v2:
- Repurpose the detection as a fallback method instead of using
  it only for the DP legacy case. By now we should normally use VBT to
  detect DP legacy ports as well.
Suggested-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarImre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: default avatarMika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214182703.18865-5-imre.deak@intel.com
      2a041c97
    • Imre Deak's avatar
      drm/i915/icl: Fix HPD handling for TypeC legacy ports · f6bff60e
      Imre Deak authored 
      Atm HPD disconnect events on TypeC ports will break things, since we'll
switch the TypeC mode (between legacy and disconnected modes as well as
among USB DP alternate, Thunderbolt alternate and disconnected modes) on
the fly from the HPD disconnect interrupt work while the port may be
still active.

Even if the port happens to be not active during the disconnect we'd
still have a problem during a subsequent modeset or AUX transfer that
could happen regardless of the port's connected state. For instance the
system resume display mode restore code and userspace could perform a
modeset on the port or userspace could start an AUX transfer even if the
port is in disconnected state.

To fix this keep TypeC legacy ports in legacy mode whenever we're not
suspended. This mode is a static configuration as opposed to the
Thunderbolt and USB DP alternate modes between which we can switch
dynamically.

We determine if a TypeC port is legacy (wired to a legacy HDMI or a
legacy DP connector) via the VBT DDI port specific USB-TypeC and
Thunderbolt flags. If both these flags are cleared then the port is
configured for legacy mode.

On such legacy ports we'll run the TypeC PHY connect sequence explicitly
during driver loading and system resume (vs. running the sequence during
HPD processing). The connect will succeed even if the display is not
connected to begin with (or disappears during the suspended state) since
for legacy ports the PORT_TX_DFLEXDPPMS / DP_PHY_MODE_STATUS_COMPLETED
flag is always set (as opposed to the USB DP alternate mode where it
gets set only when a display is connected).

Correspondingly run the TypeC PHY disconnect sequence during system
suspend and driver unloading. For the unloading case I had to split
up intel_dp_encoder_destroy() to be able to have the 1. flush any
pending encoder work, 2. disconnect TC PHY, 3. call DRM core cleanup and
kfree on the encoder object.

For now run the PHY disconnect during suspend only for TypeC legacy
ports. We will need to disconnect even in USB DP alternate mode in the
future, but atm we don't have a way to reconnect the port in this mode
during resume if the display disappears while being suspended. So for
now punt on this case.

Note that we do not disconnect the port during runtime suspend; in
legacy mode there are no shared HW resources (PHY lanes) with other HW
blocks (USB), so no need to release / reacquire these resources as with
USB DP alternate mode. The only reason to disconnect legacy ports during
system suspend is that the PORT_TX_DFLEXDPPMS /
DP_PHY_MODE_STATUS_COMPLETED flag must be rechecked and the port must be
connected again during system resume. We'll also have to turn the check
for this flag into a poll, after figuring out what's the proper timeout
value for it.

v2:
- Remove the redundant special casing of legacy mode when doing a
  disconnect in icl_tc_port_connected(). It's guaranteed already that we
  won't disconnect legacy ports in that function.
- Add a note about the new intel_ddi_encoder_destroy() hook.
- Reword the commit message after switching to the VBT based detection.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108070
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108924
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarImre Deak <imre.deak@intel.com>
Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214182703.18865-4-imre.deak@intel.com
      f6bff60e
    • Imre Deak's avatar
      drm/i915/bios: Parse the VBT TypeC and Thunderbolt port flags · 38b3416f
      Imre Deak authored 
      This is needed by the next patch to determine if a DDI TypeC port is
physically wired to a legacy DP or legacy HDMI connector or if the port
is wired to a USB-C/Thunderbolt connector.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarImre Deak <imre.deak@intel.com>
Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214182703.18865-3-imre.deak@intel.com
      38b3416f
    • Imre Deak's avatar
      drm/i915/icl: Add a debug print for TypeC port disconnection · f0236a85
      Imre Deak authored 
      It's useful to see at which point a TypeC port gets disconnected, so add
a debug print for it.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarImre Deak <imre.deak@intel.com>
Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214182703.18865-2-imre.deak@intel.com
      f0236a85
    • Chris Wilson's avatar
      drm/i915: Apply missed interrupt after reset w/a to all ringbuffer gen · 060f2322
      Chris Wilson authored 
      Having completed a test run of gem_eio across all machines in CI we also
observe the phenomenon (of lost interrupts after resetting the GPU) on
gen3 machines as well as the previously sighted gen6/gen7. Let's apply
the same HWSTAM workaround that was effective for gen6+ for all, as
although we haven't seen the same failure on gen4/5 it seems prudent to
keep the code the same.

As a consequence we can remove the extra setting of HWSTAM and apply the
register from a single site.

v2: Delazy and move the HWSTAM into its own function
v3: Mask off all HWSP writes on driver unload and engine cleanup.
v4: And what about the physical hwsp?
v5: No, engine->init_hw() is not called from driver_init_hw(), don't be
daft. Really scrub HWSTAM as early as we can in driver_init_mmio()
v6: Rename set_hwsp as it was setting the mask not the hwsp register.
v7: Ville pointed out that although vcs(bsd) was introduced for g4x/ilk,
per-engine HWSTAM was not introduced until gen6!

References: https://bugs.freedesktop.org/show_bug.cgi?id=108735Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181218102712.11058-1-chris@chris-wilson.co.uk
      060f2322
    • Clint Taylor's avatar
      drm/i915/icl: combo port vswing programming changes per BSPEC · b265a2a6
      Clint Taylor authored 
      In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.

v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: default avatarImre Deak <imre.deak@intel.com>
Signed-off-by: default avatarClint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: default avatarImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
      b265a2a6
    • Hans de Goede's avatar
      drm/i915: Update crtc scaler settings when update_pipe is set · 2c5c415c
      Hans de Goede authored 
      When the pipe_config's update_pipe flag is set we may need to update the
panel fitting settings. On GEN9+ this means we need to update the crtc's
scaler settings.

This fixes the following WARN_ON, during i915 loading on an Asrock
B150M Pro4S/D3 board with an i5-6500 CPU / graphics:

[drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.enabled
 (expected no, found yes)
pipe state doesn't match!
WARNING: CPU: 3 PID: 305 at drivers/gpu/drm/i915/intel_display.c:12084

With line 12084 being the I915_STATE_WARN call inside the
"if (!intel_pipe_config_compare())" block in verify_crtc_state().

On this board with 2 1920x1080 monitors connected over HDMI the GOP
initializes both monitors at 1920x1080 and despite no scaling being
necessary configures a scaler for one of them.

When booting with fastboot=1 on the initial modeset needs_modeset will
be false while update_pipe is true. Since we were not calling
skl_update_scaler_crtc() in this case we would leave the scaler enabled
causing this error.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217141903.4182-1-hdegoede@redhat.com
      2c5c415c
  17. 17 Dec, 2018 2 commits
  19. 13 Dec, 2018 3 commits
    • Chris Wilson's avatar
      drm/i915: Fix Cherryview oops on boot · a4893349
      Chris Wilson authored 
      Do not dereference the LUT blob before checking whether that blob
exists. Or else,

<1>[   13.978684] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
<6>[   13.978718] PGD 0 P4D 0
<4>[   13.978733] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[   13.978750] CPU: 0 PID: 282 Comm: modprobe Not tainted 4.20.0-rc5-CI-CI_DRM_5294+ #1
<4>[   13.978773] Hardware name:  /NUC5CPYB, BIOS PYBSWCEL.86A.0058.2016.1102.1842 11/02/2016
<4>[   13.978932] RIP: 0010:cherryview_load_csc_matrix+0x1e6/0x210 [i915]
<4>[   13.978953] Code: 41 5c 41 5d e9 7b 83 aa e1 41 c1 e4 0d 48 83 bd 00 02 00 00 00 48 8b 85 10 02 00 00 45 89 e5 74 09 ba 01 00 00 00 31 c9 eb 9d <48> 8b 50 48 48 c1 ea 03 81 fa 00 01 00 00 75 07 31 d2 48 85 c0 75
<4>[   13.979001] RSP: 0018:ffffc9000026f840 EFLAGS: 00010246
<4>[   13.979018] RAX: 0000000000000000 RBX: ffff888165500000 RCX: 7885fe6200000000
<4>[   13.979039] RDX: 0000000000000020 RSI: ffff88816553a008 RDI: ffff888165464a88
<4>[   13.979060] RBP: ffff888165464a88 R08: 000000000ed0e429 R09: 0000000000000001
<4>[   13.979080] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000004000
<4>[   13.979101] R13: 0000000000004000 R14: ffff888165500000 R15: ffff888165464a88
<4>[   13.979122] FS:  00007fb69c4f3540(0000) GS:ffff88817ba00000(0000) knlGS:0000000000000000
<4>[   13.979146] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[   13.979163] CR2: 0000000000000048 CR3: 000000016d7fa000 CR4: 00000000001006f0
<4>[   13.979184] Call Trace:
<4>[   13.979302]  intel_update_crtc+0x18f/0x2b0 [i915]
<4>[   13.979421]  intel_update_crtcs+0x49/0x60 [i915]
<4>[   13.979538]  intel_atomic_commit_tail+0x1ea/0xd70 [i915]
<4>[   13.979657]  ? intel_atomic_commit_ready+0x3f/0x50 [i915]
<4>[   13.979762]  ? __i915_sw_fence_complete+0x1a0/0x250 [i915]
<4>[   13.979884]  intel_atomic_commit+0x244/0x330 [i915]
<4>[   13.980002]  intel_initial_commit+0xb6/0x140 [i915]
<4>[   13.980127]  intel_modeset_init+0x7a1/0x1880 [i915]
<4>[   13.980235]  i915_driver_load+0xcbb/0x15c0 [i915]
<4>[   13.980257]  ? __pm_runtime_resume+0x4f/0x80
<4>[   13.980277]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[   13.980296]  ? lockdep_hardirqs_on+0xe0/0x1b0
<4>[   13.980401]  i915_pci_probe+0x29/0xa0 [i915]
<4>[   13.980421]  pci_device_probe+0xa1/0x130
<4>[   13.980440]  really_probe+0xf3/0x3e0
<4>[   13.980456]  driver_probe_device+0x10a/0x120
<4>[   13.980474]  __driver_attach+0xdb/0x100
<4>[   13.980489]  ? driver_probe_device+0x120/0x120
<4>[   13.980505]  ? driver_probe_device+0x120/0x120
<4>[   13.980522]  bus_for_each_dev+0x74/0xc0
<4>[   13.980539]  bus_add_driver+0x15f/0x250
<4>[   13.980554]  ? 0xffffffffa0348000
<4>[   13.980568]  driver_register+0x56/0xe0
<4>[   13.980583]  ? 0xffffffffa0348000
<4>[   13.980597]  do_one_initcall+0x58/0x2e0
<4>[   13.980615]  ? do_init_module+0x1d/0x1ea
<4>[   13.980631]  ? rcu_read_lock_sched_held+0x6f/0x80
<4>[   13.980649]  ? kmem_cache_alloc_trace+0x264/0x290
<4>[   13.980668]  do_init_module+0x56/0x1ea
<4>[   13.980685]  load_module+0x227a/0x29c0
<4>[   13.980715]  ? __se_sys_finit_module+0xd3/0xf0
<4>[   13.980731]  __se_sys_finit_module+0xd3/0xf0
<4>[   13.980756]  do_syscall_64+0x55/0x190
<4>[   13.980772]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[   13.980789] RIP: 0033:0x7fb69c019839
<4>[   13.980804] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
<4>[   13.980851] RSP: 002b:00007ffdc112e3a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
<4>[   13.980875] RAX: ffffffffffffffda RBX: 000055c689fe0b30 RCX: 00007fb69c019839
<4>[   13.980895] RDX: 0000000000000000 RSI: 000055c689a05d2e RDI: 0000000000000000
<4>[   13.980916] RBP: 000055c689a05d2e R08: 0000000000000000 R09: 0000000000000000
<4>[   13.980936] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
<4>[   13.980957] R13: 000055c689fe0c60 R14: 0000000000040000 R15: 000055c689fe0b30
<4>[   13.980986] Modules linked in: i915(+) snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_cherryview prime_numbers
<4>[   13.981027] CR2: 0000000000000048

Fixes: 302da0cd ("drm/i915: Use intel_ types more consistently for color management code (v2)")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109054Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213161241.3461-1-chris@chris-wilson.co.uk
      a4893349
    • Oscar Mateo's avatar
      drm/i915/icl: Mind the SFC units when resetting VD or VEBox engines · f513ac76
      Oscar Mateo authored 
      SFC (Scaler & Format Converter) units are shared between VD and VEBoxes.
They also happen to have separate reset bits. So, whenever we want to reset
one or more of the media engines, we have to make sure the SFCs do not
change owner in the process and, if this owner happens to be one of the
engines being reset, we need to reset the SFC as well.

This happens in 4 steps:

1) Tell the engine that a software reset is going to happen. The engine
will then try to force lock the SFC (if currently locked, it will
remain so; if currently unlocked, it will ignore this and all new lock
requests).

2) Poll the ack bit to make sure the hardware has received the forced
lock from the driver. Once this bit is set, it indicates SFC status
(lock or unlock) will not change anymore (until we tell the engine it
is safe to unlock again).

3) Check the usage bit to see if the SFC has ended up being locked to
the engine we want to reset. If this is the case, we have to reset
the SFC as well.

4) Unlock all the SFCs once the reset sequence is completed.

Obviously, if we are resetting the whole GPU, we don't have to worry
about all of this.

BSpec: 10989
BSpec: 10990
BSpec: 10954
BSpec: 10955
BSpec: 10956
BSpec: 19212
Signed-off-by: default avatarTomasz Lis <tomasz.lis@intel.com>
Signed-off-by: default avatarOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: default avatarMichel Thierry <michel.thierry@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-4-chris@chris-wilson.co.uk
      f513ac76
    • Oscar Mateo's avatar
      drm/i915/icl: Record the valid VDBoxes with SFC capability · 57b19d55
      Oscar Mateo authored 
      In Gen11, only even numbered "logical" VDBoxes are hooked up to an SFC
(Scaler & Format Converter) unit. We will use this information to decide
when the SFC units need to be reset.

BSpec: 20189
Signed-off-by: default avatarTomasz Lis <tomasz.lis@intel.com>
Signed-off-by: default avatarOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: default avatarMichel Thierry <michel.thierry@intel.com>
Signed-off-by: default avatarDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-3-chris@chris-wilson.co.uk
      57b19d55
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7