- 26 Jun, 2017 4 commits
-
-
Javier González authored
Add a new debug counter to measure cache hits on the read path Signed-off-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <matias@cnexlabs.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Javier González authored
Spare a double calculation on the fast write path. Signed-off-by:
-
Javier González authored
If nvme_alloc_request fails, propagate the right error, instead of assuming ENOMEM. Signed-off-by:
-
Javier González authored
In case of a failure when submitting a request, convert the ppa_list addresses to the target format so that it can interpret ppas for recovery Signed-off-by:
-
- 23 Jun, 2017 2 commits
-
-
Jens Axboe authored
This fixes up two commits that have touched this driver. The command status field is now a blk_status_t, so we can't check for < 0 and we definitely can't assume it's holding -Exxxx error values. All we care about here is whether ->status is zero or not. Check for that, and remove the various attempts at smart error reporting. Just log to dmesg what command failed, and the blk_status_t value. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 2a842aca ("block: introduce new block status code type") Fixes: 3f5e6a35 ("mtip32xx: convert internal command issue to block IO path") Signed-off-by:
-
Jens Axboe authored
Pull in the fix for shared tags, as it conflicts with the pending changes in for-4.13/block. We already pulled in v4.12-rc5 to solve other conflicts or get fixes that went into 4.12, so not a lot of changes in this merge. Signed-off-by:
-
- 22 Jun, 2017 1 commit
-
-
weiping authored
hwctx's queue_num has been set prior call blk_mq_init_hctx, so no need set it again. Signed-off-by:
weiping <zhangweiping@didichuxing.com> Signed-off-by:
-
- 21 Jun, 2017 20 commits
-
-
Bart Van Assche authored
Since blk_mq_quiesce_queue_nowait() can be called from interrupt context, make this safe. Since this function is not in the hot path, uninline it. Fixes: commit f4560ffe ("blk-mq: use QUEUE_FLAG_QUIESCED to quiesce queue") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
This was detected by the smatch static analyzer. Fixes: commit 2a842aca ("block: introduce new block status code type") Signed-off-by:
-
Bart Van Assche authored
Avoid that building with W=1 causes the compiler to complain that a declaration for bounce_bio_set and bounce_bio_split is missing. References: commit a8821f3f ("block: Improvements to bounce-buffer handling") Signed-off-by:
-
Bart Van Assche authored
This patch suppresses gcc 7 warnings about falling through in switch statements when building with W=1. From the gcc documentation: The -Wimplicit-fallthrough=3 warning is enabled by -Wextra. See also https://gcc.gnu.org/onlinedocs/gcc-7.1.0/gcc/Warning-Options.html. Signed-off-by:
-
Jens Axboe authored
If we have shared tags enabled, then every IO completion will trigger a full loop of every queue belonging to a tag set, and every hardware queue for each of those queues, even if nothing needs to be done. This causes a massive performance regression if you have a lot of shared devices. Instead of doing this huge full scan on every IO, add an atomic counter to the main queue that tracks how many hardware queues have been marked as needing a restart. With that, we can avoid looking for restartable queues, if we don't have to. Max reports that this restores performance. Before this patch, 4K IOPS was limited to 22-23K IOPS. With the patch, we are running at 950-970K IOPS. Fixes: 6d8c6c0f ("blk-mq: Restart a single queue if tag sets are shared") Reported-by:
Max Gurtovoy <maxg@mellanox.com> Tested-by:
Bart Van Assche <bart.vanassche@sandisk.com> Tested-by:
-
Dan Carpenter authored
This function is supposed to return blk_status_t error codes now but there was a stray -ENOMEM left behind. Fixes: 4e4cbee9 ("block: switch bios to blk_status_t") Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Bart Van Assche authored
A queue must be frozen while the mapped state of a hardware queue is changed. Additionally, any change of the mapped state is followed by a call to blk_mq_map_swqueue() (see also blk_mq_init_allocated_queue() and blk_mq_update_nr_hw_queues()). Since blk_mq_map_swqueue() does not map any unmapped hardware queue onto any software queue, no attempt will be made to run an unmapped hardware queue. Hence issue a warning upon attempts to run an unmapped hardware queue. Signed-off-by:
-
Bart Van Assche authored
The variable 'disk_type' is never modified so constify it. Signed-off-by:
-
Bart Van Assche authored
Document the locking assumptions in functions that modify blk_mq_ctx.rq_list to make it easier for humans to verify this code. Signed-off-by:
-
Bart Van Assche authored
Some functions in block/blk-core.c must only be used on blk-sq queues while others are safe to use against any queue type. Document which functions are intended for blk-sq queues and issue a warning if the blk-sq API is misused. This does not only help block driver authors but will also make it easier to remove the blk-sq code once that code is declared obsolete. Signed-off-by:
-
Bart Van Assche authored
Instead of documenting the locking assumptions of most block layer functions as a comment, use lockdep_assert_held() to verify locking assumptions at runtime. Signed-off-by:
-
Bart Van Assche authored
Add a comment above the queue_lockdep_assert_held() macro that explains the purpose of the q->queue_lock test. Signed-off-by:
-
Bart Van Assche authored
Initialization of blk-mq requests is a bit weird: blk_mq_rq_ctx_init() is called after a value has been assigned to .rq_flags and .rq_flags is initialized in __blk_mq_finish_request(). Initialize .rq_flags in blk_mq_rq_ctx_init() instead of relying on __blk_mq_finish_request(). Moving the initialization of .rq_flags is fine because all changes and tests of .rq_flags occur between blk_get_request() and finishing a request. Signed-off-by:
-
Bart Van Assche authored
Since scsi_req_init() works on a struct scsi_request, change the argument type into struct scsi_request *. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Instead of explicitly calling scsi_req_init() after blk_get_request(), call that function from inside blk_get_request(). Add an .initialize_rq_fn() callback function to the block drivers that need it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn() because it is too small to keep it as a separate function. Keep the scsi_req_init() call in ide_prep_sense() because it follows a blk_rq_init() call. References: commit 82ed4db4 ("block: split scsi_request out of struct request") Signed-off-by:
-
Bart Van Assche authored
Several block drivers need to initialize the driver-private request data after having called blk_get_request() and before .prep_rq_fn() is called, e.g. when submitting a REQ_OP_SCSI_* request. Avoid that that initialization code has to be repeated after every blk_get_request() call by adding new callback functions to struct request_queue and to struct blk_mq_ops. Signed-off-by:
-
Bart Van Assche authored
Instead of declaring the second argument of blk_*_get_request() as int and passing it to functions that expect an unsigned int, declare that second argument as unsigned int. Also because of consistency, rename that second argument from 'rw' into 'op'. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Since the srcu structure is rather large (184 bytes on an x86-64 system with kernel debugging disabled), only allocate it if needed. Reported-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
While the Write Same page currently always is in low-level it is just as easy and safer to just compare the page and offset directly. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
- 20 Jun, 2017 12 commits
-
-
Jens Axboe authored
Some storage drivers need to share tag sets between devices. It's useful to be able to model that with null_blk, to find hangs or performance issues. Add a 'shared_tags' bool module parameter that. If that is set to true and nr_devices is bigger than 1, all devices allocated will share the same tag set. Signed-off-by: -
Goldwyn Rodrigues authored
Return EAGAIN if any of the following checks fail + i_rwsem is not lockable + NODATACOW or PREALLOC is not set + Cannot nocow at the desired location + Writing beyond end of file which is not allocated Acked-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
-
Goldwyn Rodrigues authored
If IOCB_NOWAIT is set, bail if the i_rwsem is not lockable immediately. IF IOMAP_NOWAIT is set, return EAGAIN in xfs_file_iomap_begin if it needs allocation either due to file extension, writing to a hole, or COW or waiting for other DIOs to finish. Return -EAGAIN if we don't have extent list in memory. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Goldwyn Rodrigues authored
Return EAGAIN if any of the following checks fail for direct I/O: + i_rwsem is lockable + Writing beyond end of file (will trigger allocation) + Blocks are not allocated at the write location Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Goldwyn Rodrigues authored
A new bio operation flag REQ_NOWAIT is introduced to identify bio's orignating from iocb with IOCB_NOWAIT. This flag indicates to return immediately if a request cannot be made instead of retrying. Stacked devices such as md (the ones with make_request_fn hooks) currently are not supported because it may block for housekeeping. For example, an md can have a part of the device suspended. For this reason, only request based devices are supported. In the future, this feature will be expanded to stacked devices by teaching them how to handle the REQ_NOWAIT flags. Reviewed-by:
-
Goldwyn Rodrigues authored
IOCB_NOWAIT translates to IOMAP_NOWAIT for iomaps. This is used by XFS in the XFS patch. Reviewed-by:
-
Goldwyn Rodrigues authored
Find out if the I/O will trigger a wait due to writeback. If yes, return -EAGAIN. Return -EINVAL for buffered AIO: there are multiple causes of delay such as page locks, dirty throttling logic, page loading from disk etc. which cannot be taken care of. Reviewed-by:
-
Goldwyn Rodrigues authored
RWF_NOWAIT informs kernel to bail out if an AIO request will block for reasons such as file allocations, or a writeback triggered, or would block while allocating requests while performing direct I/O. RWF_NOWAIT is translated to IOCB_NOWAIT for iocb->ki_flags. FMODE_AIO_NOWAIT is a flag which identifies the file opened is capable of returning -EAGAIN if the AIO call will block. This must be set by supporting filesystems in the ->open() call. Filesystems xfs, btrfs and ext4 would be supported in the following patches. Reviewed-by:
-
Goldwyn Rodrigues authored
aio_rw_flags is introduced in struct iocb (using aio_reserved1) which will carry the RWF_* flags. We cannot use aio_flags because they are not checked for validity which may break existing applications. Note, the only place RWF_HIPRI comes in effect is dio_await_one(). All the rest of the locations, aio code return -EIOCBQUEUED before the checks for RWF_HIPRI. Reviewed-by:
-
Goldwyn Rodrigues authored
filemap_range_has_page() return true if the file's mapping has a page within the range mentioned. This function will be used to check if a write() call will cause a writeback of previous writes. Reviewed-by:
-
Goldwyn Rodrigues authored
Also added RWF_SUPPORTED to encompass all flags. Reviewed-by:
-
Jens Axboe authored
Merge branch 'stable/for-jens-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull xen-blkback fixes from Konrad: "Security and memory leak fixes in xen block driver."
-
- 19 Jun, 2017 1 commit
-
-
Ming Lei authored
When nvme_kill_queues() is run, queues may be in quiesced state, so we forcibly unquiesce queues to avoid blocking dispatch, and I/O hang can be avoided in remove path. Peviously we use blk_mq_start_stopped_hw_queues() as counterpart of blk_mq_quiesce_queue(), now we have introduced blk_mq_unquiesce_queue(), so use it explicitly. Cc: linux-nvme@lists.infradead.org Signed-off-by:
-
