- 04 Jan, 2011 40 commits
-
-
roel kluin authored
Fix test in lbs_spi_thread(). down_interruptible() can return -EINTR, but not EINTR. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The key documentation is slightly out of date, fix that. Also, the list entry in the key struct is no longer used that way, so list_del_init() isn't necessary any more there. Finally, ieee80211_key_link() is no longer invoked under RCU read lock, but rather with an appropriate station lock held. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sujith Manoharan authored
To inject a packet in monitor mode, a dummy station has to be associated with the monitor interface in the target. Failing to do this would result in a firmware crash on the device. Signed-off-by:
Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Dan Carpenter authored
ath5k_eeprom_mode_from_channel() returns -1 on error but we're storing the result in "ee_mode" which is an unsigned char. This breaks the error handling. This patch makes "ee_mode" an int. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Remove some obvious looking dead code and rename few functions Signed-off-by:
Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by:
-
Christian Lamparter authored
This reverts enables the reorder release timer once again. The issues laid out in: <http://www.spinics.net/lists/linux-wireless/msg57214.html> Have been addressed by: mac80211: serialize rx path workers mac80211: ignore PSM bit of reordered frames Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
This patch addresses the issue of serialization between the main rx path and various reorder release timers. <http://www.spinics.net/lists/linux-wireless/msg57214.html> It converts the previously local "frames" queue into a global rx queue [rx_skb_queue]. This way, everyone (be it the main rx-path or some reorder release timeout) can add frames to it. Only one active rx handler worker [ieee80211_rx_handlers] is needed. All other threads which have lost the race of "runnning_rx_handler" can now simply "return", knowing that the thread who had the "edge" will also take care of their workload. Signed-off-by:
-
Rajkumar Manoharan authored
Restart the beacon timers only if the beacon was already configured. Otherwise beacons timers are restarted unnecessarily in unassociated state too. Cc: stable@kernel.org Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
This reverts commit 0ce3bcfc. Event though with the above commit we obtain the configured DTIM period from the AP rather than always hardcoding it to '1', this seems to cause problems under the following scenarios: * Preventing association with broken AP's * Adds latency in roaming So its better to always use the safe value of '1' for dtim period Cc: Jouni Malinen <Jouni.Malinen@Atheros.com> Signed-off-by:
-
Bob Copeland authored
Fixes the misplaced article in the following: "cfg80211: Updating information on frequency 5785 MHz for 20 a MHz width channel with regulatory rule:" Signed-off-by:Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Joel A Fernandes authored
Fixed a bug where if a mesh interface has a different MAC address from its bridge interface, then it would not be able to send data traffic to any other mesh node. This also adds support for communication between mesh nodes and external bridged nodes by using a 6 address format if the source is a node within the mesh and the destination is an external node proxied by a mesh portal. Signed-off-by:
Joel A Fernandes <agnel.joel@gmail.com> Signed-off-by:
-
Felix Fietkau authored
An Rx DMA descriptor can have multiple error bits set, and some error bits (e.g. MIC failure) are filtered by the driver based on other criteria. Remove the 'else' in various error bit checks so that all error information is properly passed to the driver. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Sujith Manoharan authored
And add the copyright/license header. Signed-off-by:
-
Sujith Manoharan authored
When returning to the operating channel, a full HW reset has to be done instead of a fast channel change. Since sw_scan_complete() is called after the config() call for the home channel, we end up doing a FCC. Fix this issue by checking the OFFCHANNEL flag to determine FCC. Signed-off-by:
-
Sujith Manoharan authored
The device has to be reset when a FATAL event is received. Not doing so would leave the card in a non-working state. Signed-off-by:
-
Sujith Manoharan authored
There is no need to lock the various work cancellation calls. This will be helpful when handling FATAL events. Signed-off-by:
-
Sujith Manoharan authored
When doing a channel change, the pending URBs have to be killed properly on calling htc_stop(). This fixes the probe response timeout seen when sending UDP traffic at a high rate and running background scan at the same time. Cc: stable <stable@kernel.org> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Some minor clean ups in assigning values to beacon config parameters Signed-off-by:
-
Christian Lamparter authored
This patch tackles one of the problems of my reorder release timer patch from August. <http://www.spinics.net/lists/linux-wireless/msg57214.html> => What if the reorder release triggers and ap_sta_ps_end (called by ieee80211_rx_h_sta_process) accidentally clears the WLAN_STA_PS_STA flag, because 100ms ago - when the STA was still active - frames were put into the reorder buffer. Signed-off-by:
-
Helmut Schaa authored
The comment doesn't match the code anymore. Fix that. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Helmut Schaa authored
Since the last user of intf->lock is gone we can safely remove it. Signed-off-by:
-
Helmut Schaa authored
Instead of protecting delayed_flags with a spinlock use atomic bitops to make the code more readable. Signed-off-by:
-
Helmut Schaa authored
The tx desciptor already gets initialized to 0. Hence, there's no need to explicitly assign 0 to mpdu_density here. Signed-off-by:
-
Ismael Luceno authored
Backtrace: rt2800usb_write_tx_data rt2x00queue_write_tx_frame rt2x00mac_tx invoke_tx_handlers __ieee80211_tx ieee80211_tx virt_to_head_page ieee80211_xmit ieee80211_tx_skb ieee80211_scan_work schedule ieee80211_scan_work process_one_work ... It tried to expand the skb past it's end using skb_put. So I replaced it with a call to skb_padto, which takes the issue into account. Signed-off-by:
Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by:
-
Gertjan van Wingerde authored
Fix some pointer errors in the various calls to memcpy, memset and memmove. Although none of these errors are fatal (the expression used now results in the same pointer value) it is better to use the proper expression. All errors are having to deal with arrays. Signed-off-by:
-
Gertjan van Wingerde authored
The mac field of the rt2x00_intf structure is written to once and used twice. In both these uses the mac address is available via other means. Remove this field as it does not appear to be necessary. Signed-off-by:
-
Gertjan van Wingerde authored
The bssid field in struct rt2x00_intf is only written to once, and is never read from. Remove this field, as it appears to not be needed. Signed-off-by:
-
Johannes Stezenbach authored
When DRIVER_REQUIRE_TXSTATUS_FIFO is set, intialize the txstatus_fifo, but initialize rt2x00dev->txstatus_tasklet only when both DRIVER_REQUIRE_TXSTATUS_FIFO and rt2x00dev->ops->lib->txstatus_tasklet are set. This allows the txstatus_fifo to be used by rt2800usb which does not use txstatus_tasklet. Signed-off-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
-
Johannes Stezenbach authored
Signed-off-by:
-
Christian Lamparter authored
This patch revamps some common code-paths which are shared between (re-)initialization and suspend/resume subroutines. It also adds some helpful comments about quirks and associated difficulties. It's quite big, but it should fix #25382: <https://bugzilla.kernel.org/show_bug.cgi?id=25382> And hopefully the code is robust enough to deal with all possible suspend/resume scenarios without requiring the user to do any sort of manual and possibly dangerous work. Signed-off-by:
-
Christian Lamparter authored
By removing two "safety" msleeps (and an echo nop), the channel change delay is effectively halved. Previously, the delay could be as long as 260 ms and the device could not go off-channel without risking to miss the next DTIM beacon [interval ~307 ms]. Signed-off-by:
-
Christian Lamparter authored
This patch adds a forgotten bail-out path. Signed-off-by:
-
Bob Copeland authored
ath5k_reset is called from process context and takes the cc_lock with plain spin_lock(), but cc_lock can also be taken from tasklets in softirq context. Thus we need to at least use spin_lock_bh. This fixes the following lockdep warning: [ 19.967874] sky2 0000:01:00.0: eth0: enabling interface [ 19.982761] ieee80211 phy0: device now idle [ 20.904809] NET: Registered protocol family 17 [ 21.243857] ieee80211 phy0: device no longer idle - scanning [ 21.404343] [ 21.404346] ================================= [ 21.404450] [ INFO: inconsistent lock state ] [ 21.404518] 2.6.37-rc7-wl+ #242 [ 21.404582] --------------------------------- [ 21.404650] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 21.404721] kworker/u:4/982 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 21.404792] (&(&common->cc_lock)->rlock){+.?...}, at: [<f8115780>] ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] {SOFTIRQ-ON-W} state was registered at: [ 21.405011] [<c105cadd>] __lock_acquire+0x62f/0x13c1 [ 21.405011] [<c105d944>] lock_acquire+0xd5/0xf1 [ 21.405011] [<c12c978d>] _raw_spin_lock+0x45/0x72 [ 21.405011] [<f8111533>] ath5k_reset+0x2c0/0x349 [ath5k] [ 21.405011] [<f8111a7a>] ath5k_start+0xb8/0x139 [ath5k] [ 21.405011] [<f849c714>] ieee80211_do_open+0x13f/0x819 [mac80211] [ 21.405011] [<f849ce51>] ieee80211_open+0x63/0x66 [mac80211] [ 21.405011] [<c1258b2e>] __dev_open+0x8d/0xb6 [ 21.405011] [<c1255c64>] __dev_change_flags+0x9d/0x114 [ 21.405011] [<c1258a75>] dev_change_flags+0x18/0x44 [ 21.405011] [<c1262990>] do_setlink+0x23f/0x521 [ 21.405011] [<c1262d58>] rtnl_setlink+0xe6/0xea [ 21.405011] [<c126347c>] rtnetlink_rcv_msg+0x18a/0x1a0 [ 21.405011] [<c126d5f0>] netlink_rcv_skb+0x35/0x7b [ 21.405011] [<c12632eb>] rtnetlink_rcv+0x20/0x27 [ 21.405011] [<c126d370>] netlink_unicast+0x1bb/0x21e [ 21.405011] [<c126db21>] netlink_sendmsg+0x23b/0x288 [ 21.405011] [<c124823c>] sock_sendmsg+0xac/0xc4 [ 21.405011] [<c1248680>] sys_sendmsg+0x152/0x1a2 [ 21.405011] [<c1249b0d>] sys_socketcall+0x214/0x275 [ 21.405011] [<c10029d0>] sysenter_do_call+0x12/0x36 [ 21.405011] irq event stamp: 138032 [ 21.405011] hardirqs last enabled at (138032): [<c12ca252>] _raw_spin_unlock_irqrestore+0x3b/0x5e [ 21.405011] hardirqs last disabled at (138031): [<c12c98cc>] _raw_spin_lock_irqsave+0x18/0x7e [ 21.405011] softirqs last enabled at (138024): [<f84a570e>] ieee80211_tx_skb+0x47/0x49 [mac80211] [ 21.405011] softirqs last disabled at (138027): [<c100452b>] do_softirq+0x63/0xb4 [ 21.405011] [ 21.405011] other info that might help us debug this: [ 21.405011] 3 locks held by kworker/u:4/982: [ 21.405011] #0: (name){+.+.+.}, at: [<c1046158>] process_one_work+0x1b8/0x41b [ 21.405011] #1: ((&(&local->scan_work)->work)){+.+.+.}, at: [<c1046158>] process_one_work+0x1b8/0x41b [ 21.405011] #2: (&local->mtx){+.+.+.}, at: [<f84920fb>] ieee80211_scan_work+0x32/0x4a4 [mac80211] [ 21.405011] [ 21.405011] stack backtrace: [ 21.405011] Pid: 982, comm: kworker/u:4 Not tainted 2.6.37-rc7-wl+ #242 [ 21.405011] Call Trace: [ 21.405011] [<c12c6e68>] ? printk+0x1d/0x25 [ 21.405011] [<c105a742>] print_usage_bug+0x181/0x18b [ 21.405011] [<c105b196>] ? check_usage_forwards+0x0/0xb6 [ 21.405011] [<c105a9ec>] mark_lock+0x2a0/0x4aa [ 21.405011] [<c1059f6d>] ? trace_hardirqs_off+0xb/0xd [ 21.405011] [<c105ca68>] __lock_acquire+0x5ba/0x13c1 [ 21.405011] [<c1059eed>] ? trace_hardirqs_off_caller+0x18/0x8d [ 21.405011] [<c1059f6d>] ? trace_hardirqs_off+0xb/0xd [ 21.405011] [<c1050411>] ? local_clock+0x2c/0x4f [ 21.405011] [<c1059e00>] ? save_trace+0x2/0xa0 [ 21.405011] [<c105ac39>] ? mark_held_locks+0x43/0x5b [ 21.405011] [<c12ca252>] ? _raw_spin_unlock_irqrestore+0x3b/0x5e [ 21.405011] [<f8115780>] ? ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<c105d944>] lock_acquire+0xd5/0xf1 [ 21.405011] [<f8115780>] ? ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<c12c9b1a>] _raw_spin_lock_bh+0x4a/0x77 [ 21.405011] [<f8115780>] ? ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<f8115780>] ath5k_ani_calibration+0x29/0x5d9 [ath5k] [ 21.405011] [<c105ac39>] ? mark_held_locks+0x43/0x5b [ 21.405011] [<f8113496>] ath5k_tasklet_ani+0x1d/0x27 [ath5k] [ 21.405011] [<c1037304>] tasklet_action+0x96/0x137 [ 21.405011] [<c10379b5>] __do_softirq+0xde/0x1c3 [ 21.405011] [<c10b0cef>] ? arch_get_unmapped_area_topdown+0x3b/0x127 [ 21.405011] [<c10378d7>] ? __do_softirq+0x0/0x1c3 [ 21.405011] <IRQ> [<c1036dee>] ? irq_exit+0x3d/0x49 [ 21.405011] [<c1003b4f>] ? do_IRQ+0x98/0xac [ 21.405011] [<c1002eee>] ? common_interrupt+0x2e/0x34 [ 21.405011] [<c103007b>] ? sys_unshare+0x57/0x226 [ 21.405011] [<c1047fee>] ? queue_delayed_work+0x1/0x27 [ 21.405011] [<f84a83a0>] ? ieee80211_queue_delayed_work+0x2e/0x33 [mac80211] [ 21.405011] [<f8492528>] ? ieee80211_scan_work+0x45f/0x4a4 [mac80211] [ 21.405011] [<c104620e>] ? process_one_work+0x26e/0x41b [ 21.405011] [<c1046158>] ? process_one_work+0x1b8/0x41b [ 21.405011] [<f84920c9>] ? ieee80211_scan_work+0x0/0x4a4 [mac80211] [ 21.405011] [<c10466b6>] ? worker_thread+0x18a/0x2a5 [ 21.405011] [<c12ca25e>] ? _raw_spin_unlock_irqrestore+0x47/0x5e [ 21.405011] [<c104652c>] ? worker_thread+0x0/0x2a5 [ 21.405011] [<c104abe7>] ? kthread+0x67/0x6c [ 21.405011] [<c104ab80>] ? kthread+0x0/0x6c [ 21.405011] [<c1002efa>] ? kernel_thread_helper+0x6/0x10 Signed-off-by:Bruno Randolf <br1@einfach.org> Signed-off-by:
-
Brian Prodoehl authored
For the AR9002, the spur frequency read from the EEPROM is mangled before being compared against AR_NO_SPUR. This results in the driver trying to set up the spur mitigation for bogus spurs, rather than cleanly breaking out. Signed-off-by:
Brian Prodoehl <bprodoehl@nomadio.net> Signed-off-by:
-
Akinobu Mita authored
Simplify write file operation for /proc files by using simple_write_to_buffer(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Senthil Balasubramanian authored
Disabling BH is not required while running from a tasklet context and so replace spin_lock_bh with just spin_lock. Signed-off-by:
Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
-
Stanislaw Gruszka authored
Looks that we do not set correctly antennas when scanning on 5Ghz band and when bluetooth is enabled, because priv->cfg->scan_tx_antennas[band] is only defined for IEEE80211_BAND_2GHZ. To fix we check band before limiting antennas to first one. This allow to remove hard coded cfg->scan_tx_antennas[band]. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Bruno Randolf authored
Move mac80211 functions into new file mac80211-ops.c to have a better separation and to make base.c smaller. Signed-off-by:
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
John W. Linville authored
-
