- 01 Jun, 2016 14 commits
-
-
Bin Liu authored
urb->status is set when endpoint csr RXSTALL, H_ERROR, DATAERROR or INCOMPRX bit is set. Those bits mean a broken pipe, so don't start next urb when any of these bits is set by checking urb->status. To minimize the risk of regression, only do so for RX, until we have a test case to understand the behavior of TX. The patch fixes system freeze issue caused by repeatedly invoking RX ISR while removing a usb uart device connected to a hub, in which case the hub has no chance to report the disconnect event due to the kernel is busy in processing the RX interrupt flooding. Fix checkpatch complaint (qh != NULL) as while. Reported-by:
Max Uvarov <muvarov@gmail.com> Tested-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bin Liu authored
The MUSB Programming Guide states that the driver should clear RXCSR bit2 when the controller sets the bit. Signed-off-by:
-
Hans de Goede authored
I got one of these cards for testing uas with, it seems that with streams it dma-s all over the place, corrupting memory. On my first tests it managed to dma over the BIOS of the motherboard somehow and completely bricked it. Tests on another motherboard show that it does work with streams disabled. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Alan Stern authored
Several people have reported that UBSAN doesn't like the pointer arithmetic in ehci_hub_control(): u32 __iomem *status_reg = &ehci->regs->port_status[ (wIndex & 0xff) - 1]; u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1]; If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains. According to the C standard, pointer computations leading to locations outside the bounds of an array object (other than 1 position past the end) are undefined. In this case, the compiler would be justified in concluding the wIndex can never be 0 and then optimizing away the tests for !wIndex that occur later in the subroutine. (Although, since ehci->regs->port_status and ehci->regs->hostpc are both 0-length arrays and are thus GCC extensions to the C standard, it's not clear what the compiler is really allowed to do.) At any rate, we can avoid all these difficulties, at the cost of making the code slightly longer, by not decrementing the index when it is equal to 0. The runtime effect is minimal, and anyway ehci_hub_control() is not on a hot path. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Martin_MOKREJÅ <mmokrejs@gmail.com> Reported-by:
"Navin P.S" <navinp1912@gmail.com> CC: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by:
-
Hans de Goede authored
Commit 198de51d ("USB: uas: Limit qdepth at the scsi-host level") removed the scsi_change_queue_depth() call from uas_slave_configure() assuming that the slave would inherit the host's queue_depth, which that commit sets to the same value. This is incorrect, without the scsi_change_queue_depth() call the slave's queue_depth defaults to 1, introducing a performance regression. This commit restores the call, fixing the performance regression. Cc: stable@vger.kernel.org Fixes: 198de51d ("USB: uas: Limit qdepth at the scsi-host level") Reported-by:
Tom Yan <tom.ty89@gmail.com> Signed-off-by:
-
Tom Yan authored
Commit 198de51d ("USB: uas: Limit qdepth at the scsi-host level") made qdepth limit set in host template (`.can_queue = MAX_CMNDS`) redundant. Removing it to avoid confusion. Signed-off-by:
-
Hans de Goede authored
The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by:
-
Hans de Goede authored
Properly sort all the entries by vendor id. Signed-off-by:
-
Mathias Nyman authored
commit b1c127ae ("usb: host: xhci: plat: make use of new methods in xhci_plat_priv") sets xhci->quirks before calling xhci_gen_setup(), which will overwrite them. Don't overwite the quirks, just add the new ones Fixes: b1c127ae ("usb: host: xhci: plat: make use of new methods in xhci_plat_priv") Reported-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Thomas Petazzoni authored
On some platforms, the clocks might be registered by a platform driver. When this is the case, the clock platform driver may very well be probed after xhci-plat, in which case the first probe() invocation of xhci-plat will receive -EPROBE_DEFER as the return value of devm_clk_get(). The current code handles that as a normal error, and simply assumes that this means that the system doesn't have a clock for the XHCI controller, and continues probing without calling clk_prepare_enable(). Unfortunately, this doesn't work on systems where the XHCI controller does have a clock, but that clock is provided by another platform driver. In order to fix this situation, we handle the -EPROBE_DEFER error condition specially, and abort the XHCI controller probe(). It will be retried later automatically, the clock will be available, devm_clk_get() will succeed, and the probe() will continue with the clock prepared and enabled as expected. In practice, such issue is seen on the ARM64 Marvell 7K/8K platform, where the clocks are registered by a platform driver. Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Mathias Nyman authored
If commands timeout we mark them for abortion, then stop the command ring, and turn the commands to no-ops and finally restart the command ring. If the host is working properly the no-op commands will finish and pending completions are called. If we notice the host is failing, driver clears the command ring and completes, deletes and frees all pending commands. There are two separate cases reported where host is believed to work properly but is not. In the first case we successfully stop the ring but no abort or stop command ring event is ever sent and host locks up. The second case is if a host is removed, command times out and driver believes the ring is stopped, and assumes it will be restarted, but actually ends up timing out on the same command forever. If one of the pending commands has the xhci->mutex held it will block xhci_stop() in the remove codepath which otherwise would cleanup pending commands. Add a check that clears all pending commands in case host is removed, or we are stuck timing out on the same command. Also restart the command timeout timer when stopping the command ring to ensure we recive an ring stop/abort event. Cc: stable <stable@vger.kernel.org> Tested-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
Under stress occasions some TI devices might not return early when reading the status register during the quirk invocation of xhci_irq made by usb_hcd_pci_remove. This means that instead of returning, we end up handling this interruption in the middle of a shutdown. Since xhci->event_ring has already been freed in xhci_mem_cleanup, we end up accessing freed memory, causing the Oops below. commit 8c24d6d7 ("usb: xhci: stop everything on the first call to xhci_stop") is the one that changed the instant in which we clean up the event queue when stopping a device. Before, we didn't call xhci_mem_cleanup at the first time xhci_stop is executed (for the shared HCD), instead, we only did it after the invocation for the primary HCD, much later at the removal path. The code flow for this oops looks like this: xhci_pci_remove() usb_remove_hcd(xhci->shared) xhci_stop(xhci->shared) xhci_halt() xhci_mem_cleanup(xhci); // Free the event_queue usb_hcd_pci_remove(primary) xhci_irq() // Access the event_queue if STS_EINT is set. Crash. xhci_stop() xhci_halt() // return early The fix modifies xhci_stop to only cleanup the xhci data when releasing the primary HCD. This way, we still have the event_queue configured when invoking xhci_irq. We still halt the device on the first call to xhci_stop, though. I could reproduce this issue several times on the mainline kernel by doing a bind-unbind stress test with a specific storage gadget attached. I also ran the same test over-night with my patch applied and didn't observe the issue anymore. [ 113.334124] Unable to handle kernel paging request for data at address 0x00000028 [ 113.335514] Faulting instruction address: 0xd00000000d4f767c [ 113.336839] Oops: Kernel access of bad area, sig: 11 [#1] [ 113.338214] SMP NR_CPUS=1024 NUMA PowerNV [c000000efe47ba90] c000000000720850 usb_hcd_irq+0x50/0x80 [c000000efe47bac0] c00000000073d328 usb_hcd_pci_remove+0x68/0x1f0 [c000000efe47bb00] d00000000daf0128 xhci_pci_remove+0x78/0xb0 [xhci_pci] [c000000efe47bb30] c00000000055cf70 pci_device_remove+0x70/0x110 [c000000efe47bb70] c00000000061c6bc __device_release_driver+0xbc/0x190 [c000000efe47bba0] c00000000061c7d0 device_release_driver+0x40/0x70 [c000000efe47bbd0] c000000000619510 unbind_store+0x120/0x150 [c000000efe47bc20] c0000000006183c4 drv_attr_store+0x64/0xa0 [c000000efe47bc60] c00000000039f1d0 sysfs_kf_write+0x80/0xb0 [c000000efe47bca0] c00000000039e14c kernfs_fop_write+0x18c/0x1f0 [c000000efe47bcf0] c0000000002e962c __vfs_write+0x6c/0x190 [c000000efe47bd90] c0000000002eab40 vfs_write+0xc0/0x200 [c000000efe47bde0] c0000000002ec85c SyS_write+0x6c/0x110 [c000000efe47be30] c000000000009260 system_call+0x38/0x108 Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Roger Quadros <rogerq@ti.com> Cc: joel@jms.id.au Cc: stable@vger.kernel.org Reviewed-by:
Roger Quadros <rogerq@ti.com> Cc: <stable@vger.kernel.org> #v4.3+ Tested-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: Here's the first set of fixes for v4.7-rc cycle. Nothing extra fancy this time around. Patches range from MS OS Descriptor usage fixes, to Clear Stall EP command fix on dwc3, to some f_fs fixes and out of bounds accesses on renesas driver.
-
John Youn authored
As of core revision 2.60a the recommended programming model is to set the ClearPendIN bit when issuing a Clear Stall EP command for IN endpoints. This is to prevent an issue where some (non-compliant) hosts may not send ACK TPs for pending IN transfers due to a mishandled error condition. Synopsys STAR 9000614252. Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com>
-
- 31 May, 2016 17 commits
-
-
Peter Griffin authored
Set USB3_FORCE_VBUSVALID when configured for USB_DR_MODE_PERIPHERAL mode, as it is required to have a working setup. This worked on the internal driver by relying on the reset value of the syscfg register as the bits aren't explicity cleared and set like the upstream driver. Also add a comment about what setting this bit means. Signed-off-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
-
William Wu authored
In OS descriptors handling, if ctrl->bRequestType is USB_RECIP_DEVICE and w_index != 0x4 or (w_value >> 8) is true, it will not assign a valid value to req->length, but use the default value(-EOPNOTSUPP), and queue an OS desc request with the invalid req->length. It always happens on the platforms which use os_desc (for example: rk3366, rk3399), and cause kernel panic as follows (use dwc3 driver): Unable to handle kernel paging request at virtual address ffffffc0f7e00000 Internal error: Oops: 96000146 [#1] PREEMPT SMP PC is at __dma_clean_range+0x18/0x30 LR is at __swiotlb_map_page+0x50/0x64 Call trace: [<ffffffc0000930f8>] __dma_clean_range+0x18/0x30 [<ffffffc00062214c>] usb_gadget_map_request+0x134/0x1b0 [<ffffffc0005c289c>] __dwc3_ep0_do_control_data+0x110/0x14c [<ffffffc0005c2d38>] __dwc3_gadget_ep0_queue+0x198/0x1b8 [<ffffffc0005c2e18>] dwc3_gadget_ep0_queue+0xc0/0xe8 [<ffffffc00061cfec>] composite_ep0_queue.constprop.14+0x34/0x98 [<ffffffc00061dfb0>] composite_setup+0xf60/0x100c [<ffffffc0006204dc>] android_setup+0xd8/0x138 [<ffffffc0005c29a4>] dwc3_ep0_delegate_req+0x34/0x50 [<ffffffc0005c3534>] dwc3_ep0_interrupt+0x5dc/0xb58 [<ffffffc0005c0c3c>] dwc3_thread_interrupt+0x15c/0xa24 With this patch, the gadget driver will not queue a request and return immediately if req->length is invalid. And the usb controller driver can handle the unsupport request correctly. Signed-off-by:
William Wu <william.wu@rock-chips.com> Signed-off-by:
-
Jim Lin authored
If c->cdev->use_os_string flag is not set, don't need to invoke ffs_do_os_descs() in _ffs_func_bind. So uninitialized ext_compat_id pointer won't be accessed by __ffs_func_bind_do_os_desc to cause kernel panic. Signed-off-by:
Jim Lin <jilin@nvidia.com> Signed-off-by:
-
Heinrich Schuchardt authored
Commit dc8c46a5 ("usb: gadget: f_tcm: convert to new function interface with backward compatibility") introduced a possible out of bounds memory access: If tpg is not found in function usbg_drop_tpg, tpg_instances[TPG_INSTANCES] is accessed. Fixes: dc8c46a5 ("usb: gadget: f_tcm: convert to new function interface with backward compatibility") Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Heinrich Schuchardt authored
Function in_rq_cur copies random bytes from the stack. Zero the memory instead. Fixes: 132fcb46 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by:
-
Arnd Bergmann authored
A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq MIPS system unfortunately broke big-endian operation on PowerPC APM82181 as reported by Christian Lamparter, and likely other systems. It actually introduced multiple issues: - it broke big-endian ARM kernels: any machine that was working correctly with a little-endian kernel is no longer using byteswaps on big-endian kernels, which clearly breaks them. - On PowerPC the same thing must be true: if it was working before, using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC usually uses big-endian kernels, so they are likely all broken. - The barrier for dwc2_writel is on the wrong side of the __raw_writel(), so the MMIO no longer synchronizes with DMA operations. - On architectures that require specific CPU instructions for MMIO access, using the __raw_ variant may turn this into a pointer dereference that does not have the same effect as the readl/writel. This patch is a simple revert for all architectures other than MIPS, in the hope that we can more easily backport it to fix the regression on PowerPC and ARM systems without breaking the Lantiq system again. We should follow this up with a more elaborate change to add runtime detection of endianness, to make sure it also works on all other combinations of architectures and implementations of the usb-dwc2 device. That patch however will be fairly large and not appropriate for backports to stable kernels. Felipe suggested a different approach, using an endianness switching register to always put the device into LE mode, but unfortunately the dwc2 hardware does not provide a generic way to do that. Also, I see no practical way of addressing the problem more generally by patching architecture specific code on MIPS. Fixes: 95c8bc36 ("usb: dwc2: Use platform endianness when accessing registers") Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jim Lin authored
Current __ffs_data_do_os_desc() of f_fs.c will check reserved1 field of OS_DESC_EXT_COMPAT and return -EINVAL if it's 1. But MS OS 1.0 Descriptors http://msdn.microsoft.com/en-us/library/windows/hardware/gg463179.aspx defines that field to be 1. Signed-off-by:
-
Krzysztof Opasiak authored
Device qualifier descriptor is now generated by composite.c code. So let's fix this old comment by removing parts which are no longer valid. Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Krzysztof Opasiak <kopasiak90@gmail.com> Signed-off-by:
-
Krzysztof Opasiak authored
This descriptor is never used. Currently device qualifier descriptor is generated by compossite code so no need to keep it in function file. Signed-off-by:
-
Krzysztof Opasiak authored
This descriptor is never used. Currently device qualifier descriptor is generated by compossite code, so no need to keep it in function file. Signed-off-by:
-
Alexandre Belloni authored
v3.20 doesn't exist, it is actually v4.0. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Vahram Aharonyan authored
Add a check in dwc2_hsotg_ep_sethalt() so that it does not halt isochronous endpoints. Signed-off-by:
Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by:
-
Vahram Aharonyan authored
The gadget API function usb_ep_set_halt() expects the gadget to return -EAGAIN if the ep is active. Add support for this behavior. Otherwise this may break mass storage protocol if a STALL is attempted on the endpoint. Signed-off-by:
-
Bin Liu authored
[ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48 [ 40.569219] #1: (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14) [ 40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4) [ 40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994) [ 40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238) [ 40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110) [ 40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114) [ 40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c) [ 40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: -
Dan Carpenter authored
This loop is supposed to set all the .num[] values to -1 but it's off by one so it skips the first element and sets one element past the end of the array. I've cleaned up the loop a little as well. Fixes: ddf8abd2 ('USB: f_fs: the FunctionFS driver') Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Steinar H. Gunderson authored
dwc3-exynos has two problems during init if the regulators are slow to come up (for instance if the I2C bus driver is not on the initramfs) and return probe deferral. First, every time this happens, the driver leaks the USB phys created; they need to be deallocated on error. Second, since the phy devices are created before the regulators fail, this means that there's a new device to re-trigger deferred probing, which causes it to essentially go into a busy loop of re-probing the device until the regulators come up. Move the phy creation to after the regulators have succeeded, and also fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs which doesn't contain the I2C driver), this reduces the number of probe attempts (for each of the two controllers) from more than 2000 to eight. Signed-off-by:
Steinar H. Gunderson <sesse@google.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Vivek Gautam <gautam.vivek@samsung.com> Fixes: d720f057 ("usb: dwc3: exynos: add nop transceiver support") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Krzysztof Opasiak authored
By default user could store only valid UDC name in configfs UDC attr by doing: echo $UDC_NAME > UDC Commit (855ed04a "usb: gadget: udc-core: independent registration of gadgets and gadget drivers") broke this behavior and allowed to store any arbitrary string in UDC file and udc core was waiting for such controller to appear. echo "any arbitrary string here" > UDC This commit fix this by adding a flag which prevents configfs gadget from being added to list of pending drivers if UDC with given name has not been found. Signed-off-by:
-
- 29 May, 2016 3 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
-
- 28 May, 2016 6 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... -
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: -
git://ftp.sciencehorizons.net/linuxLinus Torvalds authored
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac8 ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h>
-
