Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from ppc64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from mips64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from arm32 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from sparc64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from arm64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since LD_ABS/LD_IND instructions are now removed from the core and
reimplemented through a combination of inlined BPF instructions and
a slow-path helper, we can get rid of the complexity from x64 JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This adds a small BPF helper similar to bpf_skb_load_bytes() that
is able to load relative to mac/net header offset from the skb's
linear data. Compared to bpf_skb_load_bytes(), it takes a fifth
argument namely start_header, which is either BPF_HDR_START_MAC
or BPF_HDR_START_NET. This allows for a more flexible alternative
compared to LD_ABS/LD_IND with negative offset. It's enabled for
tc BPF programs as well as sock filter program types where it's
mainly useful in reuseport programs to ease access to lower header
data.

Reference: https://lists.iovisor.org/pipermail/iovisor-dev/2017-March/000698.htmlSigned-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The main part of this work is to finally allow removal of LD_ABS
and LD_IND from the BPF core by reimplementing them through native
eBPF instead. Both LD_ABS/LD_IND were carried over from cBPF and
keeping them around in native eBPF caused way more trouble than
actually worth it. To just list some of the security issues in
the past:

  * fdfaf64e ("x86: bpf_jit: support negative offsets")
  * 35607b02 ("sparc: bpf_jit: fix loads from negative offsets")
  * e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
  * 07aee943 ("bpf, sparc: fix usage of wrong reg for load_skb_regs after call")
  * 6d59b7db ("bpf, s390x: do not reload skb pointers in non-skb context")
  * 87338c8e ("bpf, ppc64: do not reload skb pointers in non-skb context")

For programs in native eBPF, LD_ABS/LD_IND are pretty much legacy
these days due to their limitations and more efficient/flexible
alternatives that have been developed over time such as direct
packet access. LD_ABS/LD_IND only cover 1/2/4 byte loads into a
register, the load happens in host endianness and its exception
handling can yield unexpected behavior. The latter is explained
in depth in f6b1b3bf ("bpf: fix subprog verifier bypass by
div/mod by 0 exception") with similar cases of exceptions we had.
In native eBPF more recent program types will disable LD_ABS/LD_IND
altogether through may_access_skb() in verifier, and given the
limitations in terms of exception handling, it's also disabled
in programs that use BPF to BPF calls.

In terms of cBPF, the LD_ABS/LD_IND is used in networking programs
to access packet data. It is not used in seccomp-BPF but programs
that use it for socket filtering or reuseport for demuxing with
cBPF. This is mostly relevant for applications that have not yet
migrated to native eBPF.

The main complexity and source of bugs in LD_ABS/LD_IND is coming
from their implementation in the various JITs. Most of them keep
the model around from cBPF times by implementing a fastpath written
in asm. They use typically two from the BPF program hidden CPU
registers for caching the skb's headlen (skb->len - skb->data_len)
and skb->data. Throughout the JIT phase this requires to keep track
whether LD_ABS/LD_IND are used and if so, the two registers need
to be recached each time a BPF helper would change the underlying
packet data in native eBPF case. At least in eBPF case, available
CPU registers are rare and the additional exit path out of the
asm written JIT helper makes it also inflexible since not all
parts of the JITer are in control from plain C. A LD_ABS/LD_IND
implementation in eBPF therefore allows to significantly reduce
the complexity in JITs with comparable performance results for
them, e.g.:

test_bpf             tcpdump port 22             tcpdump complex
x64      - before    15 21 10                    14 19  18
         - after      7 10 10                     7 10  15
arm64    - before    40 91 92                    40 91 151
         - after     51 64 73                    51 62 113

For cBPF we now track any usage of LD_ABS/LD_IND in bpf_convert_filter()
and cache the skb's headlen and data in the cBPF prologue. The
BPF_REG_TMP gets remapped from R8 to R2 since it's mainly just
used as a local temporary variable. This allows to shrink the
image on x86_64 also for seccomp programs slightly since mapping
to %rsi is not an ereg. In callee-saved R8 and R9 we now track
skb data and headlen, respectively. For normal prologue emission
in the JITs this does not add any extra instructions since R8, R9
are pushed to stack in any case from eBPF side. cBPF uses the
convert_bpf_ld_abs() emitter which probes the fast path inline
already and falls back to bpf_skb_load_helper_{8,16,32}() helper
relying on the cached skb data and headlen as well. R8 and R9
never need to be reloaded due to bpf_helper_changes_pkt_data()
since all skb access in cBPF is read-only. Then, for the case
of native eBPF, we use the bpf_gen_ld_abs() emitter, which calls
the bpf_skb_load_helper_{8,16,32}_no_cache() helper unconditionally,
does neither cache skb data and headlen nor has an inlined fast
path. The reason for the latter is that native eBPF does not have
any extra registers available anyway, but even if there were, it
avoids any reload of skb data and headlen in the first place.
Additionally, for the negative offsets, we provide an alternative
bpf_skb_load_bytes_relative() helper in eBPF which operates
similarly as bpf_skb_load_bytes() and allows for more flexibility.
Tested myself on x64, arm64, s390x, from Sandipan on ppc64.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Remove all eBPF tests involving LD_ABS/LD_IND from test_bpf.ko. Reason
is that the eBPF tests from test_bpf module do not go via BPF verifier
and therefore any instruction rewrites from verifier cannot take place.

Therefore, move them into test_verifier which runs out of user space,
so that verfier can rewrite LD_ABS/LD_IND internally in upcoming patches.
It will have the same effect since runtime tests are also performed from
there. This also allows to finally unexport bpf_skb_vlan_{push,pop}_proto
and keep it internal to core kernel.

Additionally, also add further cBPF LD_ABS/LD_IND test coverage into
test_bpf.ko suite.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

No change in functionality, just remove the '__' prefix and replace it
with a 'bpf_' prefix instead. We later on add a couple of more helpers
for cBPF and keeping the scheme with '__' is suboptimal there.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Björn Töpel says:

====================
This patch set introduces a new address family called AF_XDP that is
optimized for high performance packet processing and, in upcoming
patch sets, zero-copy semantics. In this patch set, we have removed
all zero-copy related code in order to make it smaller, simpler and
hopefully more review friendly. This patch set only supports copy-mode
for the generic XDP path (XDP_SKB) for both RX and TX and copy-mode
for RX using the XDP_DRV path. Zero-copy support requires XDP and
driver changes that Jesper Dangaard Brouer is working on. Some of his
work has already been accepted. We will publish our zero-copy support
for RX and TX on top of his patch sets at a later point in time.

An AF_XDP socket (XSK) is created with the normal socket()
syscall. Associated with each XSK are two queues: the RX queue and the
TX queue. A socket can receive packets on the RX queue and it can send
packets on the TX queue. These queues are registered and sized with
the setsockopts XDP_RX_RING and XDP_TX_RING, respectively. It is
mandatory to have at least one of these queues for each socket. In
contrast to AF_PACKET V2/V3 these descriptor queues are separated from
packet buffers. An RX or TX descriptor points to a data buffer in a
memory area called a UMEM. RX and TX can share the same UMEM so that a
packet does not have to be copied between RX and TX. Moreover, if a
packet needs to be kept for a while due to a possible retransmit, the
descriptor that points to that packet can be changed to point to
another and reused right away. This again avoids copying data.

This new dedicated packet buffer area is call a UMEM. It consists of a
number of equally size frames and each frame has a unique frame id. A
descriptor in one of the queues references a frame by referencing its
frame id. The user space allocates memory for this UMEM using whatever
means it feels is most appropriate (malloc, mmap, huge pages,
etc). This memory area is then registered with the kernel using the new
setsockopt XDP_UMEM_REG. The UMEM also has two queues: the FILL queue
and the COMPLETION queue. The fill queue is used by the application to
send down frame ids for the kernel to fill in with RX packet
data. References to these frames will then appear in the RX queue of
the XSK once they have been received. The completion queue, on the
other hand, contains frame ids that the kernel has transmitted
completely and can now be used again by user space, for either TX or
RX. Thus, the frame ids appearing in the completion queue are ids that
were previously transmitted using the TX queue. In summary, the RX and
FILL queues are used for the RX path and the TX and COMPLETION queues
are used for the TX path.

The socket is then finally bound with a bind() call to a device and a
specific queue id on that device, and it is not until bind is
completed that traffic starts to flow. Note that in this patch set,
all packet data is copied out to user-space.

A new feature in this patch set is that the UMEM can be shared between
processes, if desired. If a process wants to do this, it simply skips
the registration of the UMEM and its corresponding two queues, sets a
flag in the bind call and submits the XSK of the process it would like
to share UMEM with as well as its own newly created XSK socket. The
new process will then receive frame id references in its own RX queue
that point to this shared UMEM. Note that since the queue structures
are single-consumer / single-producer (for performance reasons), the
new process has to create its own socket with associated RX and TX
queues, since it cannot share this with the other process. This is
also the reason that there is only one set of FILL and COMPLETION
queues per UMEM. It is the responsibility of a single process to
handle the UMEM. If multiple-producer / multiple-consumer queues are
implemented in the future, this requirement could be relaxed.

How is then packets distributed between these two XSK? We have
introduced a new BPF map called XSKMAP (or BPF_MAP_TYPE_XSKMAP in
full). The user-space application can place an XSK at an arbitrary
place in this map. The XDP program can then redirect a packet to a
specific index in this map and at this point XDP validates that the
XSK in that map was indeed bound to that device and queue number. If
not, the packet is dropped. If the map is empty at that index, the
packet is also dropped. This also means that it is currently mandatory
to have an XDP program loaded (and one XSK in the XSKMAP) to be able
to get any traffic to user space through the XSK.

AF_XDP can operate in two different modes: XDP_SKB and XDP_DRV. If the
driver does not have support for XDP, or XDP_SKB is explicitly chosen
when loading the XDP program, XDP_SKB mode is employed that uses SKBs
together with the generic XDP support and copies out the data to user
space. A fallback mode that works for any network device. On the other
hand, if the driver has support for XDP, it will be used by the AF_XDP
code to provide better performance, but there is still a copy of the
data into user space.

There is a xdpsock benchmarking/test application included that
demonstrates how to use AF_XDP sockets with both private and shared
UMEMs. Say that you would like your UDP traffic from port 4242 to end
up in queue 16, that we will enable AF_XDP on. Here, we use ethtool
for this:

      ethtool -N p3p2 rx-flow-hash udp4 fn
      ethtool -N p3p2 flow-type udp4 src-port 4242 dst-port 4242 \
          action 16

Running the rxdrop benchmark in XDP_DRV mode can then be done
using:

      samples/bpf/xdpsock -i p3p2 -q 16 -r -N

For XDP_SKB mode, use the switch "-S" instead of "-N" and all options
can be displayed with "-h", as usual.

We have run some benchmarks on a dual socket system with two Broadwell
E5 2660 @ 2.0 GHz with hyperthreading turned off. Each socket has 14
cores which gives a total of 28, but only two cores are used in these
experiments. One for TR/RX and one for the user space application. The
memory is DDR4 @ 2133 MT/s (1067 MHz) and the size of each DIMM is
8192MB and with 8 of those DIMMs in the system we have 64 GB of total
memory. The compiler used is gcc (Ubuntu 7.3.0-16ubuntu3) 7.3.0. The
NIC is Intel I40E 40Gbit/s using the i40e driver.

Below are the results in Mpps of the I40E NIC benchmark runs for 64
and 1500 byte packets, generated by a commercial packet generator HW
outputing packets at full 40 Gbit/s line rate. The results are without
retpoline so that we can compare against previous numbers. With
retpoline, the AF_XDP numbers drop with between 10 - 15 percent.

AF_XDP performance 64 byte packets. Results from V2 in parenthesis.
Benchmark   XDP_SKB   XDP_DRV
rxdrop       2.9(3.0)   9.6(9.5)
txpush       2.6(2.5)   NA*
l2fwd        1.9(1.9)   2.5(2.5) (TX using XDP_SKB in both cases)

AF_XDP performance 1500 byte packets:
Benchmark   XDP_SKB   XDP_DRV
rxdrop       2.1(2.2)   3.3(3.3)
l2fwd        1.4(1.4)   1.8(1.8) (TX using XDP_SKB in both cases)

* NA since we have no support for TX using the XDP_DRV infrastructure
  in this patch set. This is for a future patch set since it involves
  changes to the XDP NDOs. Some of this has been upstreamed by Jesper
  Dangaard Brouer.

XDP performance on our system as a base line:

64 byte packets:
XDP stats       CPU     pps         issue-pps
XDP-RX CPU      16      32.3(32.9)M  0

1500 byte packets:
XDP stats       CPU     pps         issue-pps
XDP-RX CPU      16      3.3(3.3)M    0

Changes from V2:

* Fixed a race in XSKMAP map found by Will. The code has been
  completely rearchitected and is now simpler, faster, and hopefully
  also not racy. Please review and check if it holds.

If you would like to diff V2 against V3, you can find them here:
https://github.com/bjoto/linux/tree/af-xdp-v2-on-bpf-next
https://github.com/bjoto/linux/tree/af-xdp-v3-on-bpf-next

The structure of the patch set is as follows:

Patches 1-3: Basic socket and umem plumbing
Patches 4-9: RX support together with the new XSKMAP
Patches 10-13: TX support
Patch 14: Statistics support with getsockopt()
Patch 15: Sample application

We based this patch set on bpf-next commit a3fe1f6f ("tools:
bpftool: change time format for program 'loaded at:' information")

To do for this patch set:

* Syzkaller torture session being worked on

Post-series plan:

* Optimize performance

* Kernel selftest

* Kernel load module support of AF_XDP would be nice. Unclear how to
  achieve this though since our XDP code depends on net/core.

* Support for AF_XDP sockets without an XPD program loaded. In this
  case all the traffic on a queue should go up to the user space socket.

* Daniel Borkmann's suggestion for a "copy to XDP socket, and return
  XDP_PASS" for a tcpdump-like functionality.

* And of course getting to zero-copy support in small increments,
  starting with TX then adding RX.

Thanks: Björn and Magnus
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This is a sample application for AF_XDP sockets. The application
supports three different modes of operation: rxdrop, txonly and l2fwd.

To show-case a simple round-robin load-balancing between a set of
sockets in an xskmap, set the RR_LB compile time define option to 1 in
"xdpsock.h".

v2: The entries variable was calculated twice in {umem,xq}_nb_avail.
Co-authored-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In this commit, a new getsockopt is added: XDP_STATISTICS. This is
used to obtain stats from the sockets.

v2: getsockopt now returns size of stats structure.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Here, Tx support is added. The user fills the Tx queue with frames to
be sent by the kernel, and let's the kernel know using the sendmsg
syscall.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The new dev_direct_xmit will be used by AF_XDP in later commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Another setsockopt (XDP_TX_QUEUE) is added to let the process allocate
a queue, where the user process can pass frames to be transmitted by
the kernel.

The mmapping of the queue is done using the XDP_PGOFF_TX_QUEUE offset.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Here, we add another setsockopt for registered user memory (umem)
called XDP_UMEM_COMPLETION_QUEUE. Using this socket option, the
process can ask the kernel to allocate a queue (ring buffer) and also
mmap it (XDP_UMEM_PGOFF_COMPLETION_QUEUE) into the process.

The queue is used to explicitly pass ownership of umem frames from the
kernel to user process. This will be used by the TX path to tell user
space that a certain frame has been transmitted and user space can use
it for something else, if it wishes.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This commit wires up the xskmap to XDP_SKB layer.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This commit wires up the xskmap to XDP_DRV layer.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The xskmap is yet another BPF map, very much inspired by
dev/cpu/sockmap, and is a holder of AF_XDP sockets. A user application
adds AF_XDP sockets into the map, and by using the bpf_redirect_map
helper, an XDP program can redirect XDP frames to an AF_XDP socket.

Note that a socket that is bound to certain ifindex/queue index will
*only* accept XDP frames from that netdev/queue index. If an XDP
program tries to redirect from a netdev/queue index other than what
the socket is bound to, the frame will not be received on the socket.

A socket can reside in multiple maps.

v3: Fixed race and simplified code.
v2: Removed one indirection in map lookup.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Here the actual receive functions of AF_XDP are implemented, that in a
later commit, will be called from the XDP layers.

There's one set of functions for the XDP_DRV side and another for
XDP_SKB (generic).

A new XDP API, xdp_return_buff, is also introduced.

Adding xdp_return_buff, which is analogous to xdp_return_frame, but
acts upon an struct xdp_buff. The API will be used by AF_XDP in future
commits.

Support for the poll syscall is also implemented.

v2: xskq_validate_id did not update cons_tail.
    The entries variable was calculated twice in xskq_nb_avail.
    Squashed xdp_return_buff commit.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Here, the bind syscall is added. Binding an AF_XDP socket, means
associating the socket to an umem, a netdev and a queue index. This
can be done in two ways.

The first way, creating a "socket from scratch". Create the umem using
the XDP_UMEM_REG setsockopt and an associated fill queue with
XDP_UMEM_FILL_QUEUE. Create the Rx queue using the XDP_RX_QUEUE
setsockopt. Call bind passing ifindex and queue index ("channel" in
ethtool speak).

The second way to bind a socket, is simply skipping the
umem/netdev/queue index, and passing another already setup AF_XDP
socket. The new socket will then have the same umem/netdev/queue index
as the parent so it will share the same umem. You must also set the
flags field in the socket address to XDP_SHARED_UMEM.

v2: Use PTR_ERR instead of passing error variable explicitly.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Another setsockopt (XDP_RX_QUEUE) is added to let the process allocate
a queue, where the kernel can pass completed Rx frames from the kernel
to user process.

The mmapping of the queue is done using the XDP_PGOFF_RX_QUEUE offset.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Here, we add another setsockopt for registered user memory (umem)
called XDP_UMEM_FILL_QUEUE. Using this socket option, the process can
ask the kernel to allocate a queue (ring buffer) and also mmap it
(XDP_UMEM_PGOFF_FILL_QUEUE) into the process.

The queue is used to explicitly pass ownership of umem frames from the
user process to the kernel. These frames will in a later patch be
filled in with Rx packet data by the kernel.

v2: Fixed potential crash in xsk_mmap.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In this commit the base structure of the AF_XDP address family is set
up. Further, we introduce the abilty register a window of user memory
to the kernel via the XDP_UMEM_REG setsockopt syscall. The memory
window is viewed by an AF_XDP socket as a set of equally large
frames. After a user memory registration all frames are "owned" by the
user application, and not the kernel.

v2: More robust checks on umem creation and unaccount on error.
    Call set_page_dirty_lock on cleanup.
    Simplified xdp_umem_reg.
Co-authored-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Buildable skeleton of AF_XDP without any functionality. Just what it
takes to register a new address family.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF
only. Classic BPF is supported because of the conversion by BPF core.

Almost all instructions from eBPF ISA supported except the following:
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW

It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment.

IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use
EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF
ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others
eBPF registers, R0-R10, are simulated through scratch space on stack.

The reasons behind the hardware registers allocation policy are:
1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit
  for general eBPF 64bit register simulation.
2:We need at least 4 registers to simulate most eBPF ISA operations
  on registers operands instead of on register&memory operands.
3:We need to put BPF_REG_AX on hardware registers, or constant blinding
  will degrade jit performance heavily.

Tested on PC (Intel(R) Core(TM) i5-5200U CPU).
Testing results on i5-5200U:
1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed]
2) test_progs: Summary: 83 PASSED, 0 FAILED.
3) test_lpm: OK
4) test_lru_map: OK
5) test_verifier: Summary: 828 PASSED, 0 FAILED.

Above tests are all done in following two conditions separately:
1:bpf_jit_enable=1 and bpf_jit_harden=0
2:bpf_jit_enable=1 and bpf_jit_harden=2

Below are some numbers for this jit implementation:
Note:
  I run test_progs in kselftest 100 times continuously for every condition,
  the numbers are in format: total/times=avg.
  The numbers that test_bpf reports show almost the same relation.

a:jit_enable=0 and jit_harden=0            b:jit_enable=1 and jit_harden=0
  test_pkt_access:PASS:ipv4:15622/100=156    test_pkt_access:PASS:ipv4:10674/100=106
  test_pkt_access:PASS:ipv6:9130/100=91      test_pkt_access:PASS:ipv6:4855/100=48
  test_xdp:PASS:ipv4:240198/100=2401         test_xdp:PASS:ipv4:138912/100=1389
  test_xdp:PASS:ipv6:137326/100=1373         test_xdp:PASS:ipv6:68542/100=685
  test_l4lb:PASS:ipv4:61100/100=611          test_l4lb:PASS:ipv4:37302/100=373
  test_l4lb:PASS:ipv6:101000/100=1010        test_l4lb:PASS:ipv6:55030/100=550

c:jit_enable=1 and jit_harden=2
  test_pkt_access:PASS:ipv4:10558/100=105
  test_pkt_access:PASS:ipv6:5092/100=50
  test_xdp:PASS:ipv4:131902/100=1319
  test_xdp:PASS:ipv6:77932/100=779
  test_l4lb:PASS:ipv4:38924/100=389
  test_l4lb:PASS:ipv6:57520/100=575

The numbers show we get 30%~50% improvement.

See Documentation/networking/filter.txt for more information.

Changelog:

 Changes v5-v6:
 1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for
   consistence reason.
 2:Clean up non-standard comments, reported by Daniel Borkmann.
 3:Fix a memory leak issue, repoted by Daniel Borkmann.

 Changes v4-v5:
 1:Delete is_on_stack, BPF_REG_AX is the only one
   on real hardware registers, so just check with
   it.
 2:Apply commit 1612a981 ("bpf, x64: fix JIT emission
   for dead code"), suggested by Daniel Borkmann.

 Changes v3-v4:
 1:Fix changelog in commit.
   I install llvm-6.0, then test_progs willn't report errors.
   I submit another patch:
   "bpf: fix misaligned access for BPF_PROG_TYPE_PERF_EVENT program type on x86_32 platform"
   to fix another problem, after that patch, test_verifier willn't report errors too.
 2:Fix clear r0[1] twice unnecessarily in *BPF_IND|BPF_ABS* simulation.

 Changes v2-v3:
 1:Move BPF_REG_AX to real hardware registers for performance reason.
 3:Using bpf_load_pointer instead of bpf_jit32.S, suggested by Daniel Borkmann.
 4:Delete partial codes in 1c2a088a, suggested by Daniel Borkmann.
 5:Some bug fixes and comments improvement.

 Changes v1-v2:
 1:Fix bug in emit_ia32_neg64.
 2:Fix bug in emit_ia32_arsh_r64.
 3:Delete filename in top level comment, suggested by Thomas Gleixner.
 4:Delete unnecessary boiler plate text, suggested by Thomas Gleixner.
 5:Rewrite some words in changelog.
 6:CodingSytle improvement and a little more comments.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):

    /*
     ...
     *.int bpf_helper(list of arguments)
     *.>    Description
     *.>    >       Start of description
     *.>    >       Another line of description
     *.>    >       And yet another line of description
     *.>    Return
     *.>    >       0 on success, or a negative error in case of failure
     ...
     */

This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.

Concretely, something like the following would now be supported:

    /*
     ...
     *int bpf_helper(list of arguments)
     *......Description
     *.>    >       Start of description...
     *>     >       Another line of description
     *..............And yet another line of description
     *>     Return
     *.>    ........0 on success, or a negative error in case of failure
     ...
     */

While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.

v2: Remove unnecessary caret when a regex is used with match().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

So by chance I looked into x86 assembly in arch/x86/net/bpf_jit_comp.c and
noticed the weird and inconsistent comment style it mistakenly learned from
the networking code:

 /* Multi-line comment ...
  * ... looks like this.
  */

Fix this to use the standard comment style specified in Documentation/CodingStyle
and used in arch/x86/ as well:

 /*
  * Multi-line comment ...
  * ... looks like this.
  */

Also, to quote Linus's ... more explicit views about this:

  http://article.gmane.org/gmane.linux.kernel.cryptoapi/21066

  > But no, the networking code picked *none* of the above sane formats.
  > Instead, it picked these two models that are just half-arsed
  > shit-for-brains:
  >
  >  (no)
  >      /* This is disgusting drug-induced
  >        * crap, and should die
  >        */
  >
  >   (no-no-no)
  >       /* This is also very nasty
  >        * and visually unbalanced */
  >
  > Please. The networking code actually has the *worst* possible comment
  > style. You can literally find that (no-no-no) style, which is just
  > really horribly disgusting and worse than the otherwise fairly similar
  > (d) in pretty much every way.

Also improve the comments and some other details while at it:

 - Don't mix same-line and previous-line comment style on otherwise
   identical code patterns within the same function,

 - capitalize 'BPF' and x86 register names consistently,

 - capitalize sentences consistently,

 - instead of 'x64' use 'x86-64': x64 is a Microsoft specific term,

 - use more consistent punctuation,

 - use standard coding style in macros as well,

 - fix typos and a few other minor details.

Consistent coding style is not optional, at least in arch/x86/.

No change in functionality.

( In case this commit causes conflicts with pending development code
  I'll be glad to help resolve any conflicts! )
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

To make eBPF program load time easier to parse from "bpftool prog"
output for machines, change the time format used by the program. The
format now differs for plain and JSON version:

- Plain version uses a string formatted according to ISO 8601.
- JSON uses the number of seconds since the Epoch, wich is less friendly
  for humans but even easier to process.

Example output:

    # ./bpftool prog
    41298: xdp  tag a04f5eef06a7f555 dev foo
            loaded_at 2018-04-18T17:19:47+0100  uid 0
            xlated 16B  not jited  memlock 4096B

    # ./bpftool prog -p
    [{
            "id": 41298,
            "type": "xdp",
            "tag": "a04f5eef06a7f555",
            "gpl_compatible": false,
            "dev": {
                "ifindex": 14,
                "ns_dev": 3,
                "ns_inode": 4026531993,
                "ifname": "foo"
            },
            "loaded_at": 1524068387,
            "uid": 0,
            "bytes_xlated": 16,
            "jited": false,
            "bytes_memlock": 4096
        }
    ]

Previously, "Apr 18/17:19" would be used at both places.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Bring the erspan uapi header file so BPF tunnel helpers can use it.

Fixes: 933a741e ("selftests/bpf: bpf tunnel test.")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Quentin Monnet says:

====================
Here is a follow-up set for eBPF helper documentation, with two patches
to fix formatting issues:

- One to fix an error I introduced with the initial set for the doc.
- One for the newly added bpf_get_stack(), that is currently not parsed
  correctly with the Python script (function signature is fine, but
  description and return value appear as empty).

There is no change to text contents in this set.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Bring fixes for eBPF helper documentation formatting to bpf.h under
tools/ as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix formatting (indent) for bpf_get_stack() helper documentation, so
that the doc is rendered correctly with the Python script.

Fixes: c195651e ("bpf: add bpf_get_stack helper")
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Some edits brought to the last iteration of BPF helper functions
documentation introduced an error with RST formatting. As a result, most
of one paragraph is rendered in bold text when only the name of a helper
should be. Fix it, and fix formatting of another function name in the
same paragraph.

Fixes: c6b5fb86 ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tracepoints to bpf core were added as a way to provide introspection
to bpf programs and maps, but after some time it became clear that
this approach is inadequate, so prog_id, map_id and corresponding
get_next_id, get_fd_by_id, get_info_by_fd, prog_query APIs were
introduced and fully adopted by bpftool and other applications.
The tracepoints in bpf core started to rot and causing syzbot warnings:
WARNING: CPU: 0 PID: 3008 at kernel/trace/trace_event_perf.c:274
Kernel panic - not syncing: panic_on_warn set ...
perf_trace_bpf_map_keyval+0x260/0xbd0 include/trace/events/bpf.h:228
trace_bpf_map_update_elem include/trace/events/bpf.h:274 [inline]
map_update_elem kernel/bpf/syscall.c:597 [inline]
SYSC_bpf kernel/bpf/syscall.c:1478 [inline]
Hence this patch deletes tracepoints in bpf core.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: syzbot <bot+a9dbb3c3e64b62536a4bc5ee7bbd4ca627566188@syzkaller.appspotmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit d5a00528 ("syscalls/core, syscalls/x86: Rename
struct pt_regs-based sys_*() to __x64_sys_*()") renamed a lot
of syscall function sys_*() to __x64_sys_*().
This caused several kprobe based samples/bpf tests failing.

This patch fixed the problem in bpf_load.c.
For x86_64 architecture, function name __x64_sys_*() will be
first used for kprobe event creation. If the creation is successful,
it will be used. Otherwise, function name sys_*() will be used
for kprobe event creation.

Fixes: d5a00528 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, the bpf_current_task_under_cgroup helper has a check where if
the BPF program is running in_interrupt(), it will return -EINVAL. This
prevents the helper to be used in many useful scenarios, particularly
BPF programs attached to Perf Events.

This commit removes the check. Tested a few NMI (Perf Event) and some
softirq context, the helper returns the correct result.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Andrey Ignatov says:

====================
BPF helpers documentation in UAPI refers to kernel ctx structures when it
has to refer to user visible ones. Fix it.
====================
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The patch syncs bpf.h to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>