I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.

USB ID of this device is 0x04f2:0x0939.

We've introduced quirks like this for other models before, so lets add
this mouse too.

Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linuxSigned-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We have to print the filename first before we can kfree it.

Fixes: 91b22810 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The c52f nano receiver is a mouse only receiver. This means that it needs
some special handling compared to the c534 nano receiver:

1) It sends unnumbered mouse reports with a size of 8 bytes, so we need
   to extend the unnumbered mouse report handling to support reports upto
   8 bytes large

2) It mouse reports have the same high-resolution format as those from the
   gaming mouse receivers

3) It can report consumer/multimedia buttons on its second interface, since
   this is a mouse-only receiver these must be forwarded to the mouse child
   device and not to the keyboard child-device (which will not exist)

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203619Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This reverts commit a025a18f.

This patch and 4ceabaf7 are giving extended timeouts
on boot for at least Ubuntu and openSUSE.

Revert them until we get a better fix.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203741Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This reverts commit 4ceabaf7.

This patch and a025a18f are giving extended timeouts
on boot for at least Ubuntu and openSUSE.

Revert them until we get a better fix.
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This reverts commit 94a9992f.

The commit allows for more than 32 bits in hid_field_extract(),
but the return value is a 32 bits int.
So basically what this commit is doing is just silencing those
legitimate errors.

Revert to a previous situation in the hope that a proper
fix will be impletemented.

Fixes: 94a9992f ("HID: Increase maximum report size allowed by hid_field_extract()")
Cc: stable@vger.kernel.org # v5.1
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Since recent high resolution scrolling changes the A4Tech driver must
check for the "REL_WHEEL_HI_RES" usage code.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203369
Fixes: 2dc702c9 ("HID: input: use the Resolution Multiplier for high-resolution scrolling")
Signed-off-by: Błażej Szczygieł <spaz16@wp.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch only adds a MODULE_DESCRIPTION statement to the driver.
This change is only cosmetic, so there should be no runtime impact.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The S510 remote-control shows up as a second keyboard (keypad) on the
receiver. It has a scroll-wheel, which normally sends wheel event
originating from the mouse's evdev node.

Add a HIDPP_QUIRK_KBD_SCROLL_WHEEL quirk for it, so that the wheel events
properly originate from the evdev node of the remote control itself.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since kernel v5.0, one single win8 touchscreen device failed.
And it turns out this is because it reports 2 InRange usage per touch.

It's a first, and I *really* wonder how this was allowed by Microsoft in
the first place. But IIRC, Breno told me this happened *after* a firmware
upgrade...

Anyway, better be safe for those crappy devices, and make sure we have
a full slot before jumping to the next.
This won't prevent all crappy devices to fail here, but at least we will
have a safeguard as long as the contact ID and the X and Y coordinates
are placed in the report after the grabage.

Fixes: 01eaac7e ("HID: multitouch: remove one copy of values")
CC: stable@vger.kernel.org # v5.0+
Reported-and-tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Bluetooth interface of the 2nd-gen Intuos Pro batches together four
independent "frames" of finger data into a single report. Each frame
is essentially equivalent to a single USB report, with the up-to-10
fingers worth of information being spread across two frames. At the
moment the driver only calls `input_sync` after processing all four
frames have been processed, which can result in the driver sending
multiple updates for a single slot within the same SYN_REPORT. This
can confuse userspace, so modify the driver to sync more often if
necessary (i.e., after reporting the state of all fingers).

Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The button numbering of the 2nd-gen Intuos Pro is not consistent between
the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath
enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the
center modeswitch button (BTN_8). The Bluetooth codepath, however, has
the center modeswitch button as BTN_0 and the the eight ExpressKeys as
BTN_1 - BTN_8. To ensure userspace button mappings do not change
depending on how the tablet is connected, modify the Bluetooth codepath
to report buttons in the same order as USB.

To ensure the mode switch LED continues to toggle in response to the
mode switch button, the `wacom_is_led_toggled` function also requires
a small update.

Link: https://github.com/linuxwacom/input-wacom/pull/79
Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for
indicating if the tip or eraser is in contact with the tablet. At the
moment, only the tip contact bit controls the state of the BTN_TOUCH
event. This prevents the eraser from working as expected. This commit
changes the driver to send BTN_TOUCH whenever either the tip or eraser
contact bit is set.

Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

If the tool spends some time in prox before entering range, a series of
events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace
have any clue about the pen whose data is being reported. We need to hold
off on reporting anything until the pen has entered range. Since we still
want to report events that occur "in prox" after the pen has *left* range
we use 'wacom-tool[0]' as the indicator that the pen did at one point
enter range and provide us/userspace with tool type and serial number
information.

Fixes: a48324de ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The serial number and tool type information that is reported by the tablet
while a pen is merely "in prox" instead of fully "in range" can be stale
and cause us to report incorrect tool information. Serial number, tool
type, and other information is only valid once the pen comes fully in range
so we should be careful to not use this information until that point.

In particular, this issue may cause the driver to incorectly report
BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.

Fixes: a48324de ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The touchpad on the cover keyboard for the Acer Switch 3 and 5 does not
work as-is under Linux. Both devices have the same usb id for the cover
keyboard.

The kernel correctly assigns the hid-rmi driver to the device using usbhid
for transport.
Any attempts of hid-rmi to talk to the device using hid_hw_output_report
fail however as usbhid does not have a working urbout due to the lack of
any out endpoints.

Looking through Wireshark usbmon recordings from the Windows Synaptics
driver for this computer running inside of QEMU shows that it should be
using SET_REPORT requests instead.

This replaces the hid_hw_output_report in hid-rmi with a
hid_hw_raw_request for this device, which is at least enough to enable
the kernel to get working multi-touch input.
Signed-off-by: Tobias Auerochs <tobi291019@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The MX5500 keyboard needs the HIDPP_CONSUMER_VENDOR_KEYS quirk to report
events for the 'A' - 'D' Smart Keys and for the "Photo Gallery" and
"Gadgets" keys.

In addition to this adding the Bluetooth match, so that hid-logitech-hidpp
is used instead of the generic HID driver, also adds battery monitoring
support when the keyboard is connected over Bluetooth.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for the HID proxy mode of the Logitech Bluetooth Mini-Receiver
which comes with the Logitech MX5500 keyboard. This receiver works the same
as the Bluetooth Mini-Receiver coming with the MX5000 keyboard and also
presents itself as an USB-hub with 2 separate USB devices for the keyboard
(boot sub-class) interface and for the (boot sub-class) mouse interface.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override
list.

BugLink: https://bugs.launchpad.net/bugs/1825718Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - support for U2F Zero device, from Andrej Shadura

 - logitech-dj has historically been treating devices behind
   non-unifying receivers as generic devices, using the HID emulation in
   the receiver. That had several shortcomings (special keys handling,
   battery level monitoring, etc). The driver has been reworked to
   enumarate (and directly communicate with) the devices behind the
   receiver, to avoid the (too) generic HID implementation in the
   receiver itself. All the work done by Benjamin Tissoires and Hans de
   Goede.

 - restructuring of intel-ish driver in order to allow for multiple
   clients of the ISH implementation, from Srinivas Pandruvada

 - several other smaller fixes and assorted device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (68 commits)
  HID: logitech-dj: fix spelling in printk
  HID: input: fix assignment of .value
  HID: input: make sure the wheel high resolution multiplier is set
  HID: logitech-dj: add usbhid dependency in Kconfig
  HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reports
  HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reports
  HID: logitech-hidpp: add support for HID++ 1.0 wheel reports
  HID: logitech-hidpp: make hidpp10_set_register_bit a bit more generic
  HID: logitech-hidpp: add input_device ptr to struct hidpp_device
  HID: logitech-hidpp: do not hardcode very long report length
  HID: logitech-hidpp: handle devices attached to 27MHz wireless receivers
  HID: logitech-hidpp: use RAP instead of FAP to get the protocol version
  HID: logitech-hidpp: remove unused origin_is_hid_core function parameter
  HID: logitech-hidpp: remove double assignment from __hidpp_send_report
  HID: logitech-hidpp: do not make failure to get the name fatal
  HID: logitech-hidpp: ignore very-short or empty names
  HID: logitech-hidpp: make .probe usbhid capable
  HID: logitech-hidpp: allow non HID++ devices to be handled by this module
  HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver
  HID: logitech-dj: make appending of the HID++ descriptors conditional
  ...

Pull i3c update from Boris Brezillon:

 - Fix a shift wrap bug in the core

 - Remove dead code in the DW driver

* tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: Fix a shift wrap bug in i3c_bus_set_addr_slot_status()
  i3c: master: dw: remove dead code from dw_i3c_master_*_xfers()

Pull security subsystem updates from James Morris:
 "Just a few bugfixes and documentation updates"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  seccomp: fix up grammar in comment
  Revert "security: inode: fix a missing check for securityfs_create_file"
  Yama: mark function as static
  security: inode: fix a missing check for securityfs_create_file
  keys: safe concurrent user->{session,uid}_keyring access
  security: don't use RCU accessors for cred->session_keyring
  Yama: mark local symbols as static
  LSM: lsm_hooks.h: fix documentation format
  LSM: fix documentation for the shm_* hooks
  LSM: fix documentation for the sem_* hooks
  LSM: fix documentation for the msg_queue_* hooks
  LSM: fix documentation for the audit_* hooks
  LSM: fix documentation for the path_chmod hook
  LSM: fix documentation for the socket_getpeersec_dgram hook
  LSM: fix documentation for the task_setscheduler hook
  LSM: fix documentation for the socket_post_create hook
  LSM: fix documentation for the syslog hook
  LSM: fix documentation for sb_copy_data hook

Pull spi updates from Mark Brown:
 "One small feature was added this release but the bulk of the diffstat
  and the changelog comes from the fact that several older drivers got
  some fairly hefty reworks and a couple of new drivers were added:

   - Support for detailed control of timing around chip selects from
     Sowjanya Komatineni.

   - A big set of fixes and imrovements for the Tegra114 driver from
     Sowjanya Komatineni.

   - A big simplification of the GPIO driver from Andrey Smirnov.

   - DMA support and fixes for the Freescale LPSPI driver from Clark
     Wang.

   - Fixes and optimizations for the bcm2835aux from Martin Sparl.

   - New drivers for Mediatek MT7621 (graduated from staging) and Zynq
     QSPI"

[ This is a so-called "evil merge" that additionally removes a warning
  due to an unused variable 'i' introduced by commit 1dfbf334 ("spi:
  ep93xx: Convert to use CS GPIO descriptors")     - Linus ]

* tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits)
  spi: rspi: Fix handling of QSPI code when transmit and receive
  spi: atmel-quadspi: fix crash while suspending
  spi: stm32: return the get_irq error
  spi: tegra114: fix PIO transfer
  spi: pxa2xx: fix SCR (divisor) calculation
  spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select
  spi: ep93xx: Convert to use CS GPIO descriptors
  spi: AD ASoC: declare missing of table
  spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl
  spi: stm32-qspi: manage the get_irq error case
  spi/spi-bcm2835: Split transfers that exceed DLEN
  spi: expand mode support
  dt-bindings: spi: spi-mt65xx: add support for MT8516
  spi: pxa2xx: Add support for Intel Comet Lake
  spi/trace: Cap buffer contents at 64 bytes
  spi: Release spi_res after finalizing message
  spi: Remove warning in spi_split_transfers_maxsize()
  spi: Remove one needless transfer speed fall back case
  spi: sh-msiof: Document r8a77470 bindings
  spi: pxa2xx: use a module softdep for dw_dmac
  ...

Pull regulator updates from Mark Brown:
 "In terms of big picture changes this has been an extremely quiet
  release however there's a lot of changes and a fairly big diffstat
  thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks
  to his work this release removes code overall even though we've added
  a new (albiet fairly small) driver.

  Notable things:

   - A fix for a long standing issue with locking on error interrupts
     from Steve Twiss.

   - A new driver for ST Microelectonics STM32 PWR"

* tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits)
  regulator: core: simplify return value on suported_voltage
  regulator: da9xxx: Switch to SPDX identifier
  regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
  regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
  regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators
  regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc
  regulator: pv880x0: Switch to SPDX identifier
  regulator: hi6xxx: Switch to SPDX identifier
  regulator: vexpress: Switch to SPDX identifier
  regulator: vexpress: Get rid of struct vexpress_regulator
  regulator: sky81452: Switch to SPDX identifier
  regulator: sky81452: Constify sky81452_reg_ops
  regulator: sy8106a: Get rid of struct sy8106a
  regulator: core: do not report EPROBE_DEFER as error but as debug
  regulator: mt63xx: Switch to SPDX identifier
  regulator: fan53555: Switch to SPDX identifier
  regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info
  regulator: ltc3589: Switch to SPDX identifier
  regulator: ltc3589: Get rid of struct ltc3589_regulator
  regulator: ltc3589: Convert to use simplified DT parsing
  ...

Pull regmap updates from Mark Brown:
 "A larger than usual set of changes, though mainly small:

   - An optimization to the debugfs code to greatly improve performance
     when dumping extremely sparse register maps from Lucas Tanure.

   - Stricter enforcement of writability checks from Han Nandor.

   - A fix for default interrupt mode configuration from Srinivas
     Kandagatla.

   - SPDX header conversion from Greg Kroah-Hartman"

* tag 'regmap-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add proper SPDX identifiers on files that did not have them.
  regmap: verify if register is writeable before writing operations
  regmap: regmap-irq: fix getting type default values
  regmap: debugfs: Jump to the next readable register
  regmap: debugfs: Replace code by already existing function

Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - fixes to seccomp test, and kselftest framework

 - cleanups to remove duplicate header defines

 - fixes to efivarfs "make clean" target

 - cgroup cleanup path

 - Moving the IMA kexec_load selftest to selftests/kexec work from Mimi
   Johar and Petr Vorel

 - A framework to kselftest for writing kernel test modules addition
   from Tobin C. Harding

* tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
  selftests: build and run gpio when output directory is the src dir
  selftests/ipc: Fix msgque compiler warnings
  selftests/efivarfs: clean up test files from test_create*()
  selftests: fix headers_install circular dependency
  selftests/kexec: update get_secureboot_mode
  selftests/kexec: make kexec_load test independent of IMA being enabled
  selftests/kexec: check kexec_load and kexec_file_load are enabled
  selftests/kexec: Add missing '=y' to config options
  selftests/kexec: kexec_file_load syscall test
  selftests/kexec: define "require_root_privileges"
  selftests/kexec: define common logging functions
  selftests/kexec: define a set of common functions
  selftests/kexec: cleanup the kexec selftest
  selftests/kexec: move the IMA kexec_load selftest to selftests/kexec
  selftests/harness: Add 30 second timeout per test
  selftests/seccomp: Handle namespace failures gracefully
  selftests: cgroup: fix cleanup path in test_memcg_subtree_control()
  selftests: efivarfs: remove the test_create_read file if it was exist
  rseq/selftests: Adapt number of threads to the number of detected cpus
  lib: Add test module for strscpy_pad
  ...

Pull crypto update from Herbert Xu:
 "API:
   - Add support for AEAD in simd
   - Add fuzz testing to testmgr
   - Add panic_on_fail module parameter to testmgr
   - Use per-CPU struct instead multiple variables in scompress
   - Change verify API for akcipher

  Algorithms:
   - Convert x86 AEAD algorithms over to simd
   - Forbid 2-key 3DES in FIPS mode
   - Add EC-RDSA (GOST 34.10) algorithm

  Drivers:
   - Set output IV with ctr-aes in crypto4xx
   - Set output IV in rockchip
   - Fix potential length overflow with hashing in sun4i-ss
   - Fix computation error with ctr in vmx
   - Add SM4 protected keys support in ccree
   - Remove long-broken mxc-scc driver
   - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
  crypto: ccree - use a proper le32 type for le32 val
  crypto: ccree - remove set but not used variable 'du_size'
  crypto: ccree - Make cc_sec_disable static
  crypto: ccree - fix spelling mistake "protedcted" -> "protected"
  crypto: caam/qi2 - generate hash keys in-place
  crypto: caam/qi2 - fix DMA mapping of stack memory
  crypto: caam/qi2 - fix zero-length buffer DMA mapping
  crypto: stm32/cryp - update to return iv_out
  crypto: stm32/cryp - remove request mutex protection
  crypto: stm32/cryp - add weak key check for DES
  crypto: atmel - remove set but not used variable 'alg_name'
  crypto: picoxcell - Use dev_get_drvdata()
  crypto: crypto4xx - get rid of redundant using_sd variable
  crypto: crypto4xx - use sync skcipher for fallback
  crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
  crypto: crypto4xx - fix ctr-aes missing output IV
  crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
  crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
  crypto: ccree - handle tee fips error during power management resume
  crypto: ccree - add function to handle cryptocell tee fips error
  ...

Pull hwmon updates from Guenter Roeck:

 - Add driver for Intersil ISL68137 PWM Controller

 - Add driver for Lochnagar 2

 - Add driver for Infineon IR38064 Voltage Regulator

 - Add support for TMP75B to lm75 driver

 - Convert documentation to ReST format

 - Use request_muxed_region for Super-IO accesses in several drivers

 - Add 'samples' attribute to ABI, and start using it

 - Add support for custom sysfs attributes to pmbus drivers (used in
   ISL68137 driver)

 - Introduce HWMON_CHANNEL_INFO macro

 - Automated changes:
      - Use permission specific [SENSOR_][DEVICE_]ATTR variants
      - Fix build warnings due to unused of_device_id structures
      - Use HWMON_CHANNEL_INFO macro

 - Various minor improvements and fixes

* tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (125 commits)
  hwmon: (lm75) Add support for TMP75B
  dt-bindings: hwmon: Add tmp75b to lm75.txt
  hwmon: (s3c) Use dev_get_drvdata()
  hwmon: (max6650) Drop call to thermal_cdev_update
  docs: hwmon: remove the extension from .rst files
  docs: hwmon: convert three docs to ReST format
  hwmon: (max6650) add thermal cooling device capability
  hwmon: (ina3221) Add voltage conversion time settings
  hwmon: (ina3221) Do not read-back to cache reg_config
  docs: hwmon: Add an index file and rename docs to *.rst
  docs: hwmon: convert remaining files to ReST format
  docs: hwmon: misc files: convert to ReST format
  docs: hwmon: pmbus files: convert to ReST format
  docs: hwmon: k8temp, w83793: convert to ReST format
  docs: hwmon: da9052, da9055: convert to ReST format
  docs: hwmon: wm831x, wm8350: convert to ReST format
  docs: hwmon: dme1737, vt1211: convert to ReST format
  docs: hwmon: ads1015: convert to ReST format
  docs: hwmon: asc7621: convert to ReST format
  docs: hwmon: ibmpowernv: convert to ReST format
  ...

Pull RAS updates from Borislav Petkov:

 - Support for varying MCA bank numbers per CPU: this is in preparation
   for future CPU enablement (Yazen Ghannam)

 - MCA banks read race fix (Tony Luck)

 - Facility to filter MCEs which should not be logged (Yazen Ghannam)

 - The usual round of cleanups and fixes

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE/AMD: Don't report L1 BTB MCA errors on some family 17h models
  x86/MCE: Add an MCE-record filtering function
  RAS/CEC: Increment cec_entered under the mutex lock
  x86/mce: Fix debugfs_simple_attr.cocci warnings
  x86/mce: Remove mce_report_event()
  x86/mce: Handle varying MCA bank counts
  x86/mce: Fix machine_check_poll() tests for error types
  MAINTAINERS: Fix file pattern for X86 MCE INFRASTRUCTURE
  x86/MCE: Group AMD function prototypes in <asm/mce.h>

Pull EDAC updates from Borislav Petkov:

 - amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam)

 - skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo)

 - altera: Stratix10 improvements (Thor Thayer)

 - The usual round of fixes, fixlets and cleanups

* tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  Revert "EDAC/amd64: Support more than two controllers for chip select handling"
  arm64: dts: stratix10: Use new Stratix10 EDAC bindings
  Documentation: dt: edac: Add Stratix10 Peripheral bindings
  Documentation: dt: edac: Fix Stratix10 IRQ bindings
  EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call
  EDAC/altera: Initialize peripheral FIFOs in probe()
  EDAC/altera: Do less intrusive error injection
  EDAC/amd64: Adjust printed chip select sizes when interleaved
  EDAC/amd64: Support more than two controllers for chip select handling
  EDAC/amd64: Recognize x16 symbol size
  EDAC/amd64: Set maximum channel layer size depending on family
  EDAC/amd64: Support more than two Unified Memory Controllers
  EDAC/amd64: Use a macro for iterating over Unified Memory Controllers
  EDAC/amd64: Add Family 17h Model 30h PCI IDs
  MAINTAINERS: Add entry for EDAC-I10NM
  MAINTAINERS: Update entry for EDAC-SKYLAKE
  EDAC, altera: Fix S10 Double Bit Error Notification
  EDAC, skx, i10nm: Make skx_common.c a pure library

Pull device properties framework updates from Rafael Wysocki:
 "These fix the handling of data nodes in the ACPI properties support
  code, add a new helper for endpoint lookup in property graphs and
  restore a comment inadvertently removed by one of previous changes.

  Specifics:

   - Fix the handling of data nodes in the ACPI properties support code
     for devices with child devices and hierarchical _DSD properties
     (Pierre-Louis Bossart).

   - Add fwnode_graph_get_endpoint_by_id() helper for endpoint lookup in
     device property graphs (Sakari Ailus).

   - Restore the _DSD data subnodes GUID comment inadvertently removed
     by one of previous changes (Shunyong Yang)"

* tag 'devprop-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
  device property: Add fwnode_graph_get_endpoint_by_id()
  ACPI: property: restore _DSD data subnodes GUID comment

Pull power management updates from Rafael Wysocki:
 "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
  handling and expose it to user space via sysfs, fix and clean up
  several cpufreq drivers, add support for two new chips to the qoriq
  cpufreq driver, fix, simplify and clean up the cpufreq core and the
  schedutil governor, add support for "CPU" domains to the generic power
  domains (genpd) framework and provide low-level PSCI firmware support
  for that feature, fix the exynos cpuidle driver and fix a couple of
  issues in the devfreq subsystem and clean it up.

  Specifics:

   - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
     processors and expose it to user space via sysfs to avoid having to
     access it through the generic MSR I/F (Rafael Wysocki).

   - Improve the handling of global turbo changes made by the platform
     firmware in the intel_pstate driver (Rafael Wysocki).

   - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
     in cpufreq (Borislav Petkov).

   - Fix the frequency calculation loop in the armada-37xx cpufreq
     driver (Gregory CLEMENT).

   - Fix possible object reference leaks in multuple cpufreq drivers
     (Wen Yang).

   - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).

   - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
     Kumar).

   - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
     (Vabhav Sharma, Yuantian Tang).

   - Fix kobject memory leak in the cpufreq core (Viresh Kumar).

   - Simplify the IOwait boosting in the schedutil cpufreq governor and
     rework the TSC cpufreq notifier on x86 (Rafael Wysocki).

   - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).

   - Improve the cpufreq documentation, add SPDX license tags to some PM
     documentation files and unify copyright notices in them (Rafael
     Wysocki).

   - Add support for "CPU" domains to the generic power domains (genpd)
     framework and provide low-level PSCI firmware support for that
     feature (Ulf Hansson).

   - Rearrange the PSCI firmware support code and add support for
     SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).

   - Improve genpd support for devices in multiple power domains (Ulf
     Hansson).

   - Unify target residency for the AFTR and coupled AFTR states in the
     exynos cpuidle driver (Marek Szyprowski).

   - Introduce new helper routine in the operating performance points
     (OPP) framework (Andrew-sh.Cheng).

   - Add support for passing on-die termination (ODT) and auto power
     down parameters from the kernel to Trusted Firmware-A (TF-A) to the
     rk3399_dmc devfreq driver (Enric Balletbo i Serra).

   - Add tracing to devfreq (Lukasz Luba).

   - Make the exynos-bus devfreq driver suspend all devices on system
     shutdown (Marek Szyprowski).

   - Fix a few minor issues in the devfreq subsystem and clean it up
     somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
     Saravana Kannan, Yangtao Li).

   - Improve system wakeup diagnostics (Stephen Boyd).

   - Rework filesystem sync messages emitted during system suspend and
     hibernation (Harry Pan)"

* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  x86: tsc: Rework time_cpufreq_notifier()
  PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
  PM / Domains: Search for the CPU device outside the genpd lock
  PM / Domains: Drop unused in-parameter to some genpd functions
  PM / Domains: Use the base device for driver_deferred_probe_check_state()
  cpufreq: qoriq: Add ls1028a chip support
  PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
  PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
  PM / Domains: Don't kfree() the virtual device in the error path
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  PM / Domains: remove unnecessary unlikely()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  firmware/psci: add support for SYSTEM_RESET2
  PM / devfreq: add tracing for scheduling work
  trace: events: add devfreq trace event file
  ...

Pull ACPI updates from Rafael Wysocki:
 "These rearrange the ACPI documentation by converting it to the .rst
  format and splitting it into clear categories (admin guide, driver
  API, firmware guide), switch over multiple users of a problematic
  library function to a new better one, update the ACPICA code in the
  kernel to a new upstream release, fix a few issues, improve power
  device management diagnostics and do some cleanups.

  Specifics:

   - Convert the ACPI documentation in the kernel source tree to the
     .rst format and split it into the admin guide, driver API and
     firmware guide parts (Changbin Du).

   - Add a PRP0001 usage example to the ACPI documentation (Thomas
     Preston).

   - Switch over the users of the acpi_dev_get_first_match_name()
     library function which turned out to be problematic to a new,
     better one called acpi_dev_get_first_match_dev() (Andy Shevchenko,
     YueHaibing).

   - Update the ACPICA code in the kernel to upstream release 20190405
     including:
       * Null pointer dereference check in acpi_ns_delete_node() (Erik
         Schmauss).
       * Multiple macro and function name changes (Bob Moore).
       * Predefined operation region name fix (Erik Schmauss).

   - Fix hibernation issue on systems using the Baytrail and Cherrytrail
     Intel SoCs introduced during the 4.20 development cycle (Hans de
     Goede).

   - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui).

   - Fix button handling during system resume (Zhang Rui).

   - Add a device PM diagnostic message (Rafael Wysocki).

   - Clean up the code, comments and white space in multiple places
     (Bjorn Helgaas, Gustavo Silva, Kefeng Wang)"

* tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST
  Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST
  Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST
  Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST
  ...

Pull arm64 updates from Will Deacon:
 "Mostly just incremental improvements here:

   - Introduce AT_HWCAP2 for advertising CPU features to userspace

   - Expose SVE2 availability to userspace

   - Support for "data cache clean to point of deep persistence" (DC PODP)

   - Honour "mitigations=off" on the cmdline and advertise status via
     sysfs

   - CPU timer erratum workaround (Neoverse-N1 #1188873)

   - Introduce perf PMU driver for the SMMUv3 performance counters

   - Add config option to disable the kuser helpers page for AArch32 tasks

   - Futex modifications to ensure liveness under contention

   - Rework debug exception handling to seperate kernel and user
     handlers

   - Non-critical fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  Documentation: Add ARM64 to kernel-parameters.rst
  arm64/speculation: Support 'mitigations=' cmdline option
  arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
  arm64: enable generic CPU vulnerabilites support
  arm64: add sysfs vulnerability show for speculative store bypass
  arm64: Fix size of __early_cpu_boot_status
  clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
  clocksource/arm_arch_timer: Remove use of workaround static key
  clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
  clocksource/arm_arch_timer: Direcly assign set_next_event workaround
  arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  ARM: vdso: Remove dependency with the arch_timer driver internals
  arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
  arm64: Add part number for Neoverse N1
  arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
  arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
  arm64: mm: Remove pte_unmap_nested()
  arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
  arm64: compat: Reduce address limit for 64K pages
  ...

Pull mmiowb removal from Will Deacon:
 "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())

  Remove mmiowb() from the kernel memory barrier API and instead, for
  architectures that need it, hide the barrier inside spin_unlock() when
  MMIO has been performed inside the critical section.

  The only relatively recent changes have been addressing review
  comments on the documentation, which is in a much better shape thanks
  to the efforts of Ben and Ingo.

  I was initially planning to split this into two pull requests so that
  you could run the coccinelle script yourself, however it's been plain
  sailing in linux-next so I've just included the whole lot here to keep
  things simple"

* tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits)
  docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section
  arch: Remove dummy mmiowb() definitions from arch code
  net/ethernet/silan/sc92031: Remove stale comment about mmiowb()
  i40iw: Redefine i40iw_mmiowb() to do nothing
  scsi/qla1280: Remove stale comment about mmiowb()
  drivers: Remove explicit invocations of mmiowb()
  drivers: Remove useless trailing comments from mmiowb() invocations
  Documentation: Kill all references to mmiowb()
  riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code
  powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code
  ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
  m68k/io: Remove useless definition of mmiowb()
  nds32/io: Remove useless definition of mmiowb()
  x86/io: Remove useless definition of mmiowb()
  arm64/io: Remove useless definition of mmiowb()
  ARM/io: Remove useless definition of mmiowb()
  mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors
  ...

Pull s390 updates from Martin Schwidefsky:

 - Support for kernel address space layout randomization

 - Add support for kernel image signature verification

 - Convert s390 to the generic get_user_pages_fast code

 - Convert s390 to the stack unwind API analog to x86

 - Add support for CPU directed interrupts for PCI devices

 - Provide support for MIO instructions to the PCI base layer, this will
   allow the use of direct PCI mappings in user space code

 - Add the basic KVM guest ultravisor interface for protected VMs

 - Add AT_HWCAP bits for several new hardware capabilities

 - Update the CPU measurement facility counter definitions to SVN 6

 - Arnds cleanup patches for his quest to get LLVM compiles working

 - A vfio-ccw update with bug fixes and support for halt and clear

 - Improvements for the hardware TRNG code

 - Another round of cleanup for the QDIO layer

 - Numerous cleanups and bug fixes

* tag 's390-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (98 commits)
  s390/vdso: drop unnecessary cc-ldoption
  s390: fix clang -Wpointer-sign warnigns in boot code
  s390: drop CONFIG_VIRT_TO_BUS
  s390: boot, purgatory: pass $(CLANG_FLAGS) where needed
  s390: only build for new CPUs with clang
  s390: simplify disabled_wait
  s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  s390/unwind: introduce stack unwind API
  s390/opcodes: add missing instructions to the disassembler
  s390/bug: add entry size to the __bug_table section
  s390: use proper expoline sections for .dma code
  s390/nospec: rename assembler generated expoline thunks
  s390: add missing ENDPROC statements to assembler functions
  locking/lockdep: check for freed initmem in static_obj()
  s390/kernel: add support for kernel address space layout randomization (KASLR)
  s390/kernel: introduce .dma sections
  s390/sclp: do not use static sccbs
  s390/kprobes: use static buffer for insn_page
  s390/kernel: convert SYSCALL and PGM_CHECK handlers to .quad
  s390/kernel: build a relocatable kernel
  ...

Pull m68k updates from Geert Uytterhoeven:

 - drop arch_gettimeoffset and adopt clocksource API

 - defconfig updates

* tag 'm68k-for-v5.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  Documentation/features/time: Mark m68k having modern-timekeeping
  m68k: defconfig: Update defconfigs for v5.1-rc1
  m68k: mvme16x: Handle timer counter overflow
  m68k: mvme16x: Convert to clocksource API
  m68k: mvme147: Handle timer counter overflow
  m68k: mvme147: Convert to clocksource API
  m68k: mac: Convert to clocksource API
  m68k: hp300: Handle timer counter overflow
  m68k: hp300: Convert to clocksource API
  m68k: bvme6000: Convert to clocksource API
  m68k: atari: Convert to clocksource API
  m68k: amiga: Convert to clocksource API
  m68k: Drop ARCH_USES_GETTIMEOFFSET
  m68k: apollo, q40, sun3, sun3x: Remove arch_gettimeoffset implementations
  m68k: mac: Fix VIA timer counter accesses
  m68k: Call timer_interrupt() with interrupts disabled

Pull x86 microcode loading update from Borislav Petkov:
 "A nice Intel microcode blob loading cleanup which gets rid of the ugly
  memcpy wrappers and switches the driver to use the iov_iter API. By
  Jann Horn.

  In addition, the /dev/cpu/microcode interface is finally deprecated as
  it is inadequate for the same reasons the late microcode loading is"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Deprecate MICROCODE_OLD_INTERFACE
  x86/microcode: Fix the ancient deprecated microcode loading method
  x86/microcode/intel: Refactor Intel microcode blob loading

Pull x86 topology updates from Ingo Molnar:
 "Two main changes: preparatory changes for Intel multi-die topology
  support, plus a syslog message tweak"

* 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Make DEBUG_HOTPLUG_CPU0 pr_info() more descriptive
  x86/smpboot: Rename match_die() to match_pkg()
  topology: Simplify cputopology.txt formatting and wording
  x86/topology: Fix documentation typo

Pull x86 timer updates from Ingo Molnar:
 "Two changes: an LTO improvement, plus the new 'nowatchdog' boot option
  to disable the clocksource watchdog"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timer: Don't inline __const_udelay()
  x86/tsc: Add option to disable tsc clocksource watchdog