- 08 Dec, 2006 40 commits
-
-
Sergei Shtylyov authored
Straighten up the IDE control/status register caching -- you *really* can't cache the shared register per-channel and hope that it won't get out ouf sync. Set the PIO fallback mode to PIO0 for the slave drive as well as master -- there was no point in having them different (most probably a resutl of typo). Do a bit of reformat and cleanup while at it... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Sergei Shtylyov authored
Fix pdcnew_tune_drive() to always set the PIO mode requested, not pick the best possible one, change pdcnew_config_drive_xfer_rate() accordingly, and get rid of the duplicate tuneproc() call in config_chipset_for_dma(). Signed-off-by:
-
Alan Cox authored
This completes IDE except for one use which requires a new core PCI function and will be polished up at the end Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Eric W. Biederman authored
Currently there is a regression and the ipc sysctls don't show up in the binary sysctl namespace. This patch adds sysctl_ipc_data to read data/write from the appropriate namespace and deliver it in the expected manner. [akpm@osdl.org: warning fix] Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
Refactor the ipc sysctl support so that it is simpler, more readable, and prepares for fixing the bug with the wrong values being returned in the sys_sysctl interface. The function proc_do_ipc_string() was misnamed as it never handled strings. It's magic of when to work with strings and when to work with longs belonged in the sysctl table. I couldn't tell if the code would work if you disabled the ipc namespace but it certainly looked like it would have problems. Signed-off-by:
-
Eric W. Biederman authored
The problem: When using sys_sysctl we don't read the proper values for the variables exported from the uts namespace, nor do we do the proper locking. This patch introduces sysctl_uts_string which properly fetches the values and does the proper locking. Signed-off-by:
-
Eric W. Biederman authored
The binary interface to the namespace sysctls was never implemented resulting in some really weird things if you attempted to use sys_sysctl to read your hostname for example. This patch series simples the code a little and implements the binary sysctl interface. In testing this patch series I discovered that our 32bit compatibility for the binary sysctl interface is imperfect. In particular KERN_SHMMAX and KERN_SMMALL are size_t sized quantities and are returned as 8 bytes on to 32bit binaries using a x86_64 kernel. However this has existing for a long time so it is not a new regression with the namespace work. Gads the whole sysctl thing needs work before it stops being easy to shoot yourself in the foot. Looking forward a little bit we need a better way to handle sysctls and namespaces as our current technique will not work for the network namespace. I think something based on the current overlapping sysctl trees will work but the proc side needs to be redone before we can use it. This patch: Introduce get_uts() and put_uts() (used later) and remove most of the special cases for when UTS namespace is compiled in. Signed-off-by:
-
Don Mullis authored
Assign defaults most likely to please a new user: 1) generate some logging output (verbose=2) 2) avoid injecting failures likely to lock up UI (ignore_gfp_wait=1, ignore_gfp_highmem=1) Signed-off-by:Don Mullis <dwm@meer.net> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Don Mullis authored
Trivial optimization and simplification of should_fail(). Do cheaper disqualification tests first (performance gain not quantified). Simplify logic; eliminate goto. Signed-off-by:
-
Don Mullis authored
Clamp /debug/fail*/stacktrace-depth to MAX_STACK_TRACE_DEPTH. Ensures that a read of /debug/fail*/stacktrace-depth always returns a truthful answer. Signed-off-by:
-
Don Mullis authored
Use bool-true-false throughout. Signed-off-by:
-
Don Mullis authored
Correct, disambiguate, and reformat documentation. Signed-off-by:
-
Andrew Morton authored
`select' doesn't work very well. With alpha `make allmodconfig' we end up with CONFIG_STACKTRACE enabled, so we end up with undefined save_stacktrace() at link time. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by:
-
Andrew Morton authored
- Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by:
-
Akinobu Mita authored
This patch provides stacktrace filtering feature. The stacktrace filter allows failing only for the caller you are interested in. For example someone may want to inject kmalloc() failures into only e100 module. they want to inject not only direct kmalloc() call, but also indirect allocation, too. - e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone --> kmem_cache_alloc This patch enables to detect function calls like this by stacktrace and inject failures. The script Documentaion/fault-injection/failmodule.sh helps it. The range of text section of loaded e100 is expected to be [/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text) So failmodule.sh stores these values into /debug/failslab/address-start and /debug/failslab/address-end. The maximum stacktrace depth is specified by /debug/failslab/stacktrace-depth. Please see the example that demonstrates how to inject slab allocation failures only for a specific module in Documentation/fault-injection/fault-injection.txt [dwm@meer.net: reject failure if any caller lies within specified range] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This patch provides process filtering feature. The process filter allows failing only permitted processes by /proc/<pid>/make-it-fail Please see the example that demostrates how to inject slab allocation failures into module init/cleanup code in Documentation/fault-injection/fault-injection.txt Signed-off-by:
-
Akinobu Mita authored
This patch provides fault-injection capability for disk IO. Boot option: fail_make_request=<probability>,<interval>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where disk IO can be issued safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_make_request/interval /debug/fail_make_request/probability /debug/fail_make_request/specifies /debug/fail_make_request/times Example: fail_make_request=10,100,0,-1 echo 1 > /sys/blocks/hda/hda1/make-it-fail generic_make_request() on /dev/hda1 fails once per 10 times. Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Akinobu Mita authored
This patch provides fault-injection capability for alloc_pages() Boot option: fail_page_alloc=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in pages. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_page_alloc/interval /debug/fail_page_alloc/probability /debug/fail_page_alloc/specifies /debug/fail_page_alloc/times /debug/fail_page_alloc/ignore-gfp-highmem /debug/fail_page_alloc/ignore-gfp-wait Example: fail_page_alloc=10,100,0,-1 The page allocation (alloc_pages(), ...) fails once per 10 times. Signed-off-by:
-
Akinobu Mita authored
This patch provides fault-injection capability for kmalloc. Boot option: failslab=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/failslab/interval /debug/failslab/probability /debug/failslab/specifies /debug/failslab/times /debug/failslab/ignore-gfp-highmem /debug/failslab/ignore-gfp-wait Example: failslab=10,100,0,-1 slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Akinobu Mita authored
This patch provides base functions implement to fault-injection capabilities. - The function should_fail() is taken from failmalloc-1.0 (http://www.nongnu.org/failmalloc/) [akpm@osdl.org: cleanups, comments, add __init] Cc: <okuji@enbug.org> Signed-off-by:
-
Akinobu Mita authored
This patch set provides some fault-injection capabilities. - kmalloc() failures - alloc_pages() failures - disk IO errors We can see what really happens if those failures happen. In order to enable these fault-injection capabilities: 1. Enable relevant config options (CONFIG_FAILSLAB, CONFIG_PAGE_ALLOC, CONFIG_MAKE_REQUEST) and if you want to configure them via debugfs, enable CONFIG_FAULT_INJECTION_DEBUG_FS. 2. Build and boot with this kernel 3. Configure fault-injection capabilities behavior by boot option or debugfs - Boot option failslab= fail_page_alloc= fail_make_request= - Debugfs /debug/failslab/* /debug/fail_page_alloc/* /debug/fail_make_request/* Please refer to the Documentation/fault-injection/fault-injection.txt for details. 4. See what really happens. Signed-off-by: -
Yan Burman authored
Replace kmalloc+memset with kcalloc and simplify Signed-off-by:
Yan Burman <burman.yan@gmail.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Jesper Juhl authored
NFS3: Calculate 'w' a bit later in nfs3svc_encode_getaclres() This is a small performance optimization since we can return before needing 'w'. It also saves a few bytes of .text : Before: text data bss dec hex filename 1632 140 0 1772 6ec fs/nfsd/nfs3acl.o After: text data bss dec hex filename 1624 140 0 1764 6e4 fs/nfsd/nfs3acl.o Signed-off-by:Jesper Juhl <jesper.juhl@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
Jesper Juhl authored
NFS2: Calculate 'w' a bit later in nfsaclsvc_encode_getaclres() This is a small performance optimization since we can return before needing 'w'. It also saves a few bytes of .text : Before: text data bss dec hex filename 2406 212 0 2618 a3a fs/nfsd/nfs2acl.o After: text data bss dec hex filename 2400 212 0 2612 a34 fs/nfsd/nfs2acl.o Signed-off-by: -
Peter Zijlstra authored
> ============================================= > [ INFO: possible recursive locking detected ] > 2.6.18-1.2724.lockdepPAE #1 > --------------------------------------------- > nfsd/6884 is trying to acquire lock: > (&inode->i_mutex){--..}, at: [<c04811e5>] vfs_rmdir+0x73/0xf4 > > but task is already holding lock: > (&inode->i_mutex){--..}, at: [<f8dfa621>] > nfsd4_clear_clid_dir+0x1f/0x3d [nfsd] > > other info that might help us debug this: > 3 locks held by nfsd/6884: > #0: (hash_sem){----}, at: [<f8de05eb>] nfsd+0x181/0x2ea [nfsd] > #1: (client_mutex){--..}, at: [<f8df6d19>] > nfsd4_setclientid_confirm+0x3b/0x2cf [nfsd] > #2: (&inode->i_mutex){--..}, at: [<f8dfa621>] > nfsd4_clear_clid_dir+0x1f/0x3d [nfsd] > > stack backtrace: > [<c040524d>] dump_trace+0x69/0x1af > [<c04053ab>] show_trace_log_lvl+0x18/0x2c > [<c040595f>] show_trace+0xf/0x11 > [<c0405a53>] dump_stack+0x15/0x17 > [<c043ca7a>] __lock_acquire+0x110/0x9b6 > [<c043d91e>] lock_acquire+0x5c/0x7a > [<c061a41b>] __mutex_lock_slowpath+0xde/0x234 > [<c04811e5>] vfs_rmdir+0x73/0xf4 > [<f8dfa62b>] nfsd4_clear_clid_dir+0x29/0x3d [nfsd] > [<f8dfa733>] nfsd4_remove_clid_dir+0xb8/0xf8 [nfsd] > [<f8df6e90>] nfsd4_setclientid_confirm+0x1b2/0x2cf [nfsd] > [<f8def19a>] nfsd4_proc_compound+0x137a/0x166c [nfsd] > [<f8de00d5>] nfsd_dispatch+0xc5/0x180 [nfsd] > [<f8d09d83>] svc_process+0x3bd/0x631 [sunrpc] > [<f8de0604>] nfsd+0x19a/0x2ea [nfsd] > [<c0404e27>] kernel_thread_helper+0x7/0x10 > DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10 > Leftover inexact backtrace: > ======================= Some nesting annotation to the nfsd4 recovery code. The vfs operations called will take dentry->d_inode->i_mutex. Signed-off-by:Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
Jeff Garzik authored
* diva, sedlbauer: the 'ready' label is only used in certain configurations * hfc_pci: - cast 'arg' to proper size for testing and printing - print out 'void __iomem *' variables with %p, rather than using incorrect casts that throw warnings Signed-off-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Adrian Bunk authored
HISAX_AMD7930 was never anywhere near to being working, and this doesn't seem to change in the forseeable future. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
-
Burman Yan authored
Acked-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
-
Jesper Juhl authored
There's a potential problem in isdn_ppp.c::isdn_ppp_decompress(). dev_alloc_skb() may fail and return NULL. If it does we will be passing a NULL skb_out to ipc->decompress() and may also end up dereferencing a NULL pointer at *proto = isdn_ppp_strip_proto(skb_out); Correct this by testing 'skb_out' against NULL early and bail out. Signed-off-by: -
Akinobu Mita authored
unregister_capi_driver() needs to be called in module cleanup. (It fixes data corruption by reloading t1isa driver) Cc: Kai Germaschewski <kai.germaschewski@gmx.de> Acked-by:
-
Amol Lad authored
Cleanups done to use min/max macros from kernel.h. Handcrafted MIN/MAX macros are changed to use macros in kernel.h [akpm@osdl.org: warning fix] Signed-off-by:
Amol Lad <amol@verismonetworks.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Jiri Slaby authored
fix gcc signed/unsigned warnings Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Jiri Slaby authored
- remove cvs rcsid and alter code that uses it. - allow a semicolon after use of macro to not confuse parsers (e.g. indent) by do {} while (0) - JIFFIES_DIFF is simple subtraction, subtract directly - returns cleanup -- do not put values in parenthesis and do not return nothing at the end of void functions - comments are /* */ in C (not //) Signed-off-by: -
Jiri Slaby authored
make the code indented by tabs. Signed-off-by:
-
Jiri Slaby authored
Save 3 indent levels in interrupt routine by moving the code to a separate function. This needs to be done to allow Lindent do its work, since only 4 columns are used for indenting now and hence Lindent makes a big mess in the code, when moves it 4*5 columns to the right. Signed-off-by:
-
Jiri Slaby authored
Do not set expires by hand, use kernel helper, which also calls add_timer. Signed-off-by:
-
Jiri Slaby authored
register tty device dynamically according to the count of board ports. Signed-off-by:
-
Jiri Slaby authored
Reorganizate module init and exit and implement logic, when something fails in these functions. The former is needed for proper handling dynamic tty_register_device. Signed-off-by:
-
Jiri Slaby authored
Let's have these function at the end of the driver and expand stli_init directly into module_init fucntion, since there is nothing other to have there. Signed-off-by:
-
