As long as I investigate SCS.1m, this model reports to transfer/receive
PCM data channels/MIDI conformant data channels in tx/rx AMDTP packet.
There's a contradiction that this model actually has no analog/digital
capture port for PCM frames and no physical MIDI ports.

I guess that SCS.1d also has the contradiction. This model has no
analog/digital ports for PCM frames and no physical MIDI ports, thus it
requires no streaming functionality.

This commit adds some modification codes to handle the contradiction,
as much as possible. Unfortunately, this module adds one PCM playback
substream for SCS.1d so as SCS.1m.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now ALSA oxfw driver gains functionalities which scs1x module has.

This commit obsoletes the scs1x module, and adds a line of MODULE_ALIAS
to load oxfw module instead of scs1x module.

In scs1x module, the name of 'shortname' field is fixed as 'SCS1x'. This
field is used to name MIDI ports for both of SCS.1m and SCS.1d. This is
not good because typically some SCS.1m and SCS.1d are used in the same
system. It's better to distinguish them according to name of the ports.
This commit applies model name in config ROM to the 'shortname'.

For the name of 'driver' and 'longname', this commit uses the same way
applied to the other models. This change may not bring disadvantages to
users because userspace applications use ALSA rawmidi or seq interface
and these interfaces are not influenced by them directly.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit adds MIDI playback ports so that scs1x driver has.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit copies some functions of asynchronous transactions for MIDI
playback, to merge scs1x module. The features of payload in asynchronous
transaction are the same as captured MIDI messages.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit adds MIDI capture so that scs1x driver has.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit copies some functions of asynchronous transactions for MIDI
capture, to merge scs1x module. The features of payload in asynchronous
transaction are:

 * System exclusive messages for SCS.1 are encoded without ID data. In
   this encoding scheme, 4 bits in LSB are available. The bits are squashed
   in payload byte. Thus, one payload byte transfers two MIDI messages.
 * The first byte of payload byte means:
  * 0x00: depending on second payload byte
   * 0xf9: including escaped system exclusive messages for SCS.1, up to
     3 byte (= 6 MIDI messages)
   * the others: including MIDI 1.0 messages
  * the others: including escaped system exclusive messages for SCS.1, up
    to 64 bytes
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When physical controls on SCS.1 models are operated, the models transfer
MIDI messages in asynchronous transactions on IEEE 1394 bus. The models
have a register to have an address for the transactions, and drivers
can register own address for this purpose.

This commit keeps a region of address, registers it and adds a handler for
the transactions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Stanton Controllers and Systems 1 (SCS.1) series is supported by ALSA
scs1x driver. This driver just supports MIDI functionality. On the other
hand, models in this series are based on OXFW971 and ALSA OXFW driver can
support them.

SCS.1 series has MIDI functionality to control its surface state such as
LED lighting. When operating physical knobs and faders, the models
generate MIDI messages. These MIDI messages are transferred by asynchronous
transactions. These transactions are really model-specific and ALSA OXFW
driver requires the functionality so as scs1x module implements.

This commit adds scs1x layer as a preparation to merge scs1x driver to
oxfw driver.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In former commits, some model-specific members are split from the
structure. The structure is just to keep names for compatibility to old
drivers.

This commit arranges name of the structure and localize it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In previous commit, some members are moved from 'struct snd_oxfw' because
they're model-specific. There are also the other model-specific parameters
in 'struct device_info'.

This commit moves these members to model-specific structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently, 'struct snd_oxfw' has some members for models supported by old
firewire-speakers driver, while these members are useless to the other
models.

This commit allocates new memory block and moves these members to
model-specific structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA oxfw driver should have backward compatibility to old
firewire-speakers driver. Additionally, in future commit, scs1x driver
will be merged. It's nice to add a pointer to have a memory block for
model-specific structures.

This commit adds a member to 'struct snd_oxfw' for this aim. Deallocation
is done at freeing ALSA card structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For better readability, use list_for_each_entry_continue_reverse()
in have_dup_chmap().
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The suspend / resume cycle resets the settings of the FM tuner. Restore
frequency settings on resume.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In symmetry we save context first before suspend and restore it last after
resume.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In case of tuner only card there is no need to take care of the codec which is
anyway absent.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

If user does not supply tea575x_tuner parameter the driver tries to detect the
tuner type. The failed codec initialization is considered as FM-only card
present, however the driver still registers an IRQ handler for it.

Move codec detection earlier to set tea575x_tuner parameter before check.

Here the following functions are introduced
 reset_coded()                       resets AC97 codec
 snd_fm801_chip_multichannel_init()  initializes cards with multichannel support

Fixes: 5618955c (ALSA: fm801: move to pcim_* and devm_* functions)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection)
brings autodetection to the driver. However the autodetection algorithm misses
the TUNER_ONLY bit if it is supplied by the user.

Thus, user gets weird messages and no card registered.

 snd_fm801 0000:0d:01.0: detected TEA575x radio type SF64-PCR
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
...
 snd_fm801 0000:0d:01.0: AC'97 0 does not respond - RESET
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 0 access is not valid [0x0], removing mixer.
 snd_fm801: probe of 0000:0d:01.0 failed with error -5

Do a copy of TUNER_ONLY bit to be applied after autodetection is done.

Fixes: d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There is no need to store struct pci_dev in struct fm801. Generic struct device
can be easily translated to struct pci_dev whenever it's needed, in particular
for one user for now.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The compiler complains on unused condition as follows

sound/pci/fm801.c: In function ‘snd_fm801_interrupt’:
sound/pci/fm801.c:585:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Put the curly braces around empty body as suggested.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The patch introduces two new helpers fm801_iowrite16() and fm801_ioread16() to
write and read the registers by offset. Previously similar was done to access
the hardware registers by their names.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Otherwise we will have a warning on ->remove() since device is a PCI one.

WARNING: CPU: 4 PID: 1411 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x137/0x160()
remove_proc_entry: removing non-empty directory 'irq/21', leaking at least 'snd_fm801'

Fixes: 5618955c (ALSA: fm801: move to pcim_* and devm_* functions)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This is an API consolidation only. The use of kmalloc + memset to 0
is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZX_DCAPS_REVERSE_ASSIGN is no longer referred by any code.
Let's drop it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZX_DCAPS_POSFIX_VIA is coupled always with AZX_DRIVER_VIA type, so we
don't have to keep this bit in dcaps.  Save one more!
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZX_DCAPS_RIRB_DELAY is dedicated only for Nvidia and its purpose is
just to set a flag in bus.  So it's better to be set in the toplevel
driver, either hda_intel.c or hda_tegra.c, instead of the common
hda_controller.c.  This also allows us to strip this flag from dcaps,
so save one more bit there.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND,
which is Creative's XFi specific.  So, we can replace it and reduce
one more bit free for DCAPS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Adding control elements is just for models supported by old
firewire-speakers modules. The processing should be in a function to add
model-dependent quirk.

This commit moves the codes to the function. As a result, the function
should handle error state, thus this commit also changes prototype of
the function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently, assignment to model-dependent quirk is corresponding to
asynchronous transactions on IEEE 1394 bus. This is also achieved with
device entry.

This commit changes the processing of model-dependent quirk with the
entry. As a result, the transactions are sent only for Loud models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA OXFW driver uses AV/C Audio Subunit commands to control some models.
The commands get/set the state of Feature function block of the subunit.
The commands are not specific to OXFW, thus there's a possibility to use
them in the other drivers.

Currently, helper functions for the commands require 'struct snd_oxfw',
although, it's not necessarily required. It's better to change prototype
of the functions without the structure for future use.

This commit changes the prototype.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit renames local functions with prefix 'spkr_', so that they're
for firewire-speakers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In ALSA firewire stack, drivers basically has no control elements. This
is due to the fact that each model has own functionality even if they use
the same communication chipset. Implementing all of the functionalities in
kernel space unreasonably increases our efforts to maintain the stack. In
most case, these functionalities can be implemented in userspace via Linux
fw character devices.

However, ALSA OXFW driver has control elements comes from old
firewire-speakers driver. Adding the elements is in a file names as
'oxfw-control.c', while the elements are really model-specific. The
name is confusing because it gives an idea to handle control elements
for all of OXFW-based models.

This commit renames the file so that it's just for models supported by
old firewire-speakers driver.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Intel Atom processors seem to have a problem at recording when
bdl_pos_adj is set to an odd value.  When a value like 1 is used, it
may drop the samples unexpectedly.  Actually, for the old Atoms, we
used to set AZX_DRIVER_SCH type, and this assigns 32 as default.
Meanwhile the newer chips, Baytrail and Braswell, are set as
AZX_DRIVER_PCH, and the lower default value, 1, is assigned.

This patch changes the default values for these chipsets to a safer
default, 32, again.  Since changing the driver type (AZX_DRIVER_XXX)
leads to the rename of the driver string, it would result in a
possible regression.  So, we can't change the type.  Instead, in this
patch, manual (ugly) PCI ID checks are added on top.

A drawback by this increase is the slight increase of the latency, but
it's a sub-ms order in normal situations, so mostly negligible.
Reported-and-tested-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just a minor cleanup; instead of passing an array, pass the assigned
bdl_pos_adj option value directory in struct azx.  Also split the code
to get the default bdl_pos_adj value for the change that will follow
after this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The usb_protocol_ops structures are never modified, so declare them as
const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A couple of i915_audio_component ops have been added and accessed
directly from patch_hdmi.c.  Ideally all these should be factored out
into hdac_i915.c.

This patch does it, adds two new helper functions for setting N/CTS
and fetching ELD bytes.  One bonus is that the hackish widget vs port
mapping is also moved to hdac_i915.c, so that it can be fixed /
enhanced more cleanly.
Reviewed-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since we have a new audio component ops to fetch the current ELD and
state now, we can reduce the usage of unsol event of HDMI/DP pins.
The unsol event isn't only unreliable, but it also needs the power
up/down of the codec and link at each time, which is a significant
power and time loss.

In this patch, the jack creation and unsol/jack event handling are
modified to use the audio component for the dedicated Intel chips.

The jack handling got slightly more codes than a simple usage of
hda_jack layer since we need to deal directly with snd_jack object;
the hda_jack layer is basically designed for the pin sense read and
unsol events, both of which aren't used any longer in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge the latest i915 audio component changes for HDMI/DP get_eld ops.
This is actually used in HD-audio side in this branch.