- 10 Oct, 2017 13 commits
-
-
Ville Syrjälä authored
Apply a bit of polish by parametrizing the CBR_DPLLBMD_PIPE defines. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-3-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Ville Syrjälä authored
One more place where we've failed to switch to enum pipe when talking about PCH transcoders. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
All our mmio writes take forever with lockdep due to the constant lock acquire&dropping we do. Ville has some patches to only acquire the mmio spinlocks once instead for every single mmio, but those aren't ready yet. As an interim solution just extend our budget slightly when lockdep is enabled, to avoid the rare and sporadic noise in CI. v2: I forgot to add the FIXME comment ... Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Mika Kuoppala authored
There is function to tell how many ports we have, so use it. We still have direct relationship with array size and port count, so no harm was done. Fixes: 76e70087 ("drm/i915: Make execlist port count variable") Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010114857.13108-1-mika.kuoppala@intel.com
-
Daniel Vetter authored
4.14-rc1 gained the fancy new cross-release support in lockdep, which seems to have uncovered a few more rules about what is allowed and isn't. This one here seems to indicate that allocating a work-queue while holding mmap_sem is a no-go, so let's try to preallocate it. Of course another way to break this chain would be somewhere in the cpu hotplug code, since this isn't the only trace we're finding now which goes through msr_create_device. Full lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 4.14.0-rc1-CI-CI_DRM_3118+ #1 Tainted: G U ------------------------------------------------------ prime_mmap/1551 is trying to acquire lock: (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8109dbb7>] apply_workqueue_attrs+0x17/0x50 but task is already holding lock: (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&dev_priv->mm_lock){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __mutex_lock+0x86/0x9b0 mutex_lock_nested+0x1b/0x20 i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915] i915_gem_userptr_ioctl+0x222/0x2c0 [i915] drm_ioctl_kernel+0x69/0xb0 drm_ioctl+0x2f9/0x3d0 do_vfs_ioctl+0x94/0x670 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 -> #5 (&mm->mmap_sem){++++}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __might_fault+0x68/0x90 _copy_to_user+0x23/0x70 filldir+0xa5/0x120 dcache_readdir+0xf9/0x170 iterate_dir+0x69/0x1a0 SyS_getdents+0xa5/0x140 entry_SYSCALL_64_fastpath+0x1c/0xb1 -> #4 (&sb->s_type->i_mutex_key#5){++++}: down_write+0x3b/0x70 handle_create+0xcb/0x1e0 devtmpfsd+0x139/0x180 kthread+0x152/0x190 ret_from_fork+0x27/0x40 -> #3 ((complete)&req.done){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 wait_for_common+0x58/0x210 wait_for_completion+0x1d/0x20 devtmpfs_create_node+0x13d/0x160 device_add+0x5eb/0x620 device_create_groups_vargs+0xe0/0xf0 device_create+0x3a/0x40 msr_device_create+0x2b/0x40 cpuhp_invoke_callback+0xa3/0x840 cpuhp_thread_fun+0x7a/0x150 smpboot_thread_fn+0x18a/0x280 kthread+0x152/0x190 ret_from_fork+0x27/0x40 -> #2 (cpuhp_state){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 cpuhp_issue_call+0x10b/0x170 __cpuhp_setup_state_cpuslocked+0x134/0x2a0 __cpuhp_setup_state+0x46/0x60 page_writeback_init+0x43/0x67 pagecache_init+0x3d/0x42 start_kernel+0x3a8/0x3fc x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x6d/0x70 verify_cpu+0x0/0xfb -> #1 (cpuhp_state_mutex){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __mutex_lock+0x86/0x9b0 mutex_lock_nested+0x1b/0x20 __cpuhp_setup_state_cpuslocked+0x52/0x2a0 __cpuhp_setup_state+0x46/0x60 page_alloc_init+0x28/0x30 start_kernel+0x145/0x3fc x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x6d/0x70 verify_cpu+0x0/0xfb -> #0 (cpu_hotplug_lock.rw_sem){++++}: check_prev_add+0x430/0x840 __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 cpus_read_lock+0x3d/0xb0 apply_workqueue_attrs+0x17/0x50 __alloc_workqueue_key+0x1d8/0x4d9 i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915] i915_gem_userptr_ioctl+0x222/0x2c0 [i915] drm_ioctl_kernel+0x69/0xb0 drm_ioctl+0x2f9/0x3d0 do_vfs_ioctl+0x94/0x670 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 other info that might help us debug this: Chain exists of: cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev_priv->mm_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev_priv->mm_lock); lock(&mm->mmap_sem); lock(&dev_priv->mm_lock); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** 2 locks held by prime_mmap/1551: #0: (&mm->mmap_sem){++++}, at: [<ffffffffa01a7b18>] i915_gem_userptr_init__mmu_notifier+0x138/0x270 [i915] #1: (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915] stack backtrace: CPU: 4 PID: 1551 Comm: prime_mmap Tainted: G U 4.14.0-rc1-CI-CI_DRM_3118+ #1 Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 Call Trace: dump_stack+0x68/0x9f print_circular_bug+0x235/0x3c0 ? lockdep_init_map_crosslock+0x20/0x20 check_prev_add+0x430/0x840 __lock_acquire+0x1420/0x15e0 ? __lock_acquire+0x1420/0x15e0 ? lockdep_init_map_crosslock+0x20/0x20 lock_acquire+0xb0/0x200 ? apply_workqueue_attrs+0x17/0x50 cpus_read_lock+0x3d/0xb0 ? apply_workqueue_attrs+0x17/0x50 apply_workqueue_attrs+0x17/0x50 __alloc_workqueue_key+0x1d8/0x4d9 ? __lockdep_init_map+0x57/0x1c0 i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915] i915_gem_userptr_ioctl+0x222/0x2c0 [i915] ? i915_gem_userptr_release+0x140/0x140 [i915] drm_ioctl_kernel+0x69/0xb0 drm_ioctl+0x2f9/0x3d0 ? i915_gem_userptr_release+0x140/0x140 [i915] ? __do_page_fault+0x2a4/0x570 do_vfs_ioctl+0x94/0x670 ? entry_SYSCALL_64_fastpath+0x5/0xb1 ? __this_cpu_preempt_check+0x13/0x20 ? trace_hardirqs_on_caller+0xe3/0x1b0 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7fbb83c39587 RSP: 002b:00007fff188dc228 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: ffffffff81492963 RCX: 00007fbb83c39587 RDX: 00007fff188dc260 RSI: 00000000c0186473 RDI: 0000000000000003 RBP: ffffc90001487f88 R08: 0000000000000000 R09: 00007fff188dc2ac R10: 00007fbb83efcb58 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 00000000c0186473 R15: 00007fff188dc2ac ? __this_cpu_preempt_check+0x13/0x20 Note that this also has the minor benefit of slightly reducing the critical section where we hold mmap_sem. v2: Set ret correctly when we raced with another thread. v3: Use Chris' diff. Attach the right lockdep splat. v4: Repaint in Tvrtko's colors (aka don't report ENOMEM if we race and some other thread managed to not also get an ENOMEM and successfully install the mmu notifier. Note that the kernel guarantees that small allocations succeed, so this never actually happens). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sasha Levin <alexander.levin@verizon.com> Cc: Marta Lofstedt <marta.lofstedt@intel.com> Cc: Tejun Heo <tj@kernel.org> References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_3180/shard-hsw3/igt@prime_mmap@test_userptr.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102939Reviewed-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Jani Nikula authored
Hint that you're not supposed to look at VBT in these functions. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b82c326be8c796a70bdc2bd1c479bbb6159f5cb0.1506586821.git.jani.nikula@intel.com
-
Jani Nikula authored
We parse and store the child devices in parse_general_definitions(). There is no need to parse the VBT block again for SDVO device mapping. Do the same as we do in parse_ddi_ports(). We no longer have access to child device size at this stage, but we also don't need to worry about reading past the child device anymore. Instead of a child device size check, do a mild optimization by limiting the parsing to gens 3 through 7. Reviewed-by:
-
Jani Nikula authored
They're both parsing the same block, and there's no need for them to be split. The former also benefits from the range checks in the latter. Reviewed-by:
-
Jani Nikula authored
Reviewed-by:
-
Jani Nikula authored
Prepare for merging parse_device_mapping() into parse_general_definitions(). No functional changes. Reviewed-by:
-
Jani Nikula authored
In theory, these might clobber information for older VBT versions. We might have to store the BDB version for later parsing, but currently all code accessing these fields will only use them on newer platforms with new enough BDB versions. Reviewed-by:
-
Jani Nikula authored
Early return on failures. Rename the variable for later merging with parse_device_mappings(). Reviewed-by:
-
Jani Nikula authored
While technically CHV isn't DDI, we do look at the VBT based DDI port info for HDMI DDC pin and DP AUX channel. (We call these "alternate", but they're really just something that aren't platform defaults.) In commit e4ab73a1 ("drm/i915: Respect alternate_ddc_pin for all DDI ports") Ville writes, "IIRC there may be CHV system that might actually need this." I'm not sure why there couldn't be even more platforms that need this, but start conservative, and parse the info for CHV in addition to DDI. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553Reported-by:
Marek Wilczewski <mw@3cte.pl> Cc: stable@vger.kernel.org Reviewed-by:
-
- 09 Oct, 2017 18 commits
-
-
Paulo Zanoni authored
If for some unexpected reason the registers all read zero it's better to WARN and return instead of dividing by zero and completely freezing the machine. I don't expect this to happen in the wild with the current code, but I accidentally triggered the division by zero while doing some debugging in an unusual environment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171005213842.11423-2-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
Looks like we were missing them. Signed-off-by:
-
Matthew Auld authored
It's a little unclear what the sg_mask actually is, so prefer the more meaningful name of sg_page_sizes. Suggested-by:
Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171009110024.29114-1-matthew.auld@intel.comReviewed-by:
-
Chris Wilson authored
Currently, we reject attempting to pin a large bo into the mappable aperture, but only after trying to create the vma. Under debug kernels, repeatedly creating and freeing that vma for an oversized bo consumes one-third of the runtime for pwrite/pread tests as it is spent on kmalloc/kfree tracking. If we move the rejection to before creating that vma, we lose some accuracy of checking against the fence_size as opposed to object size, though the fence can never be smaller than the object. Note that the vma creation itself will reject an attempt to create a vma larger than the GTT so we can remove one redundant test. Signed-off-by:
-
Chris Wilson authored
Both pread/pwrite GTT paths provide a fast fallback in case we cannot map the whole object at a time. Currently, we use the fallback for very large objects and for active objects that would require remapping, but we can also add active fault mappable objects to the list that we want to avoid evicting. The rationale is that such fault mappable objects are in active use and to evict requires tearing down the CPU PTE and forcing a page fault on the next access; more costly, and intefers with other processes, than our per-page GTT fallback. Signed-off-by:
-
Chris Wilson authored
As we have a lightweight fallback to insert a single page into the aperture, try to avoid any heavier evictions when attempting to insert the entire object. Signed-off-by:
-
Chris Wilson authored
If the caller says that he doesn't want to evict any other faulting vma, honour that flag. The logic was used in evict_something, but not the more specific evict_for_node, now being used as a preliminary probe since commit 606fec95 ("drm/i915: Prefer random replacement before eviction search"). Fixes: 606fec95 ("drm/i915: Prefer random replacement before eviction search") Fixes: 82118877 ("drm/i915: Choose not to evict faultable objects from the GGTT") References: https://bugs.freedesktop.org/show_bug.cgi?id=102490Signed-off-by:
-
Chris Wilson authored
We don't wish to refault the entire object (other vma) when unbinding one partial vma. To do this track which vma have been faulted into the user's address space. v2: Use a local vma_offset to tidy up a multiline unmap_mapping_range(). Signed-off-by:
-
Chris Wilson authored
Following the pattern now used for obj->mm.pages, use just pin_fence and unpin_fence to control access to the fence registers. I.e. instead of calling get_fence(); pin_fence(), we now just need to call pin_fence(). This will make it easier to reduce the locking requirements around fence registers. Signed-off-by:
-
Chris Wilson authored
Acquire the fence register for the iomap in i915_vma_pin_iomap() on behalf of the caller. We probably want for the caller to specify whether the fence should be pinned for their usage, but at the moment all callers do want the associated fence, or none, so take it on their behalf. Signed-off-by:
-
Chris Wilson authored
Add assert_forcewakes_active() (the complementary function to assert_forcewakes_inactive) that documents the requirement of a function for its callers to be holding the forcewake ref (i.e. the function is part of a sequence over which RC6 must be prevented). One such example is during ringbuffer reset, where RC6 must be held across the whole reinitialisation sequence. v2: Include debug information in the WARN so we know which fw domain is missing. Signed-off-by:
-
Chris Wilson authored
The lowlevel reset functions expect the caller to be holding the rpm wakeref for the device access across the reset. We were not explicitly doing this in the sefltest, so for simplicity acquire the wakeref for the duration of all subtests. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Chris Wilson authored
Resetting the engine requires us to hold the forcewake wakeref to prevent RC6 trying to happen in the middle of the reset sequence. The consequence of an unwanted RC6 event in the middle is that random state is then saved to the powercontext and restored later, which may overwrite the mmio state we need to preserve (e.g. PD_DIR_BASE in the legacy ringbuffer reset_ring_common()). This was noticed in the live_hangcheck selftests when Haswell would sporadically fail to restart during igt_reset_queue(). Signed-off-by:
-
Chris Wilson authored
During hangcheck testing, we try to execute requests following the GPU reset, and in particular want to try and debug when those fail. Signed-off-by:
-
Chris Wilson authored
We can use drm_printer to hide the differences between printk and seq_printf, and so make the i915_engine_info pretty printer able to be called from different contexts and not just debugfs. For instance, I want to use the pretty printer to debug kselftests. Signed-off-by:
-
Chris Wilson authored
We only apply the hugepage PD redirection inside the ppGTT, so during i915_vma_insert() we want to exclude the GGTT from the additional alignment constraints (thereby avoiding the extra GTT pressure from fragmentation). Add an assert to document that intention alongside the comment. v2: After discussion with Matthew, make it a blanket GGTT ban (previously we allowed the expansion for appgtt, and so indirectly ggtt). There are issues we need to fix before allowing the current appgtt to be used with hugepages, and if we do, we probably want more care over when to expand/align, as the mappable aperture inside the ggtt is precious. Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009092019.20747-1-chris@chris-wilson.co.ukReviewed-by:
-
Ville Syrjälä authored
Eliminate the duplicate code for pipe timing readout in intel_crtc_mode_get() by using the functions we use for the normal state readout. v2: Store dotclock in adjusted_mode instead of the final mode Cc: dri-devel@lists.freedesktop.org Cc: Rob Kramer <rob@solution-space.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
intel_crtc->config->cpu_transcoder isn't yet filled out when intel_crtc_mode_get() gets called during output probing, so we should not use it there. Instead intel_crtc_mode_get() figures out the correct transcoder on its own, and that's what we should use. If the BIOS boots LVDS on pipe B, intel_crtc_mode_get() would actually end up reading the timings from pipe A instead (since PIPE_A==0), which clearly isn't what we want. It looks to me like this may have been broken by commit eccb140b ("drm/i915: hw state readout&check support for cpu_transcoder") as that one removed the early initialization of cpu_transcoder from intel_crtc_init(). Cc: stable@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Rob Kramer <rob@solution-space.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by:
Rob Kramer <rob@solution-space.com> Fixes: eccb140b ("drm/i915: hw state readout&check support for cpu_transcoder") References: https://lists.freedesktop.org/archives/dri-devel/2016-April/104142.htmlSigned-off-by:
-
- 07 Oct, 2017 9 commits
-
-
Matthew Auld authored
For gen8+ platforms which support the 48b PPGTT, enable platform level support for 2M pages. Also enable for mock testing. Signed-off-by:
-
Matthew Auld authored
For gen9+ enable platform level support for 64K pages. Also enable for mock testing. Signed-off-by:
-
Matthew Auld authored
Currently gvt gtt handling doesn't support huge page entries, so disable for now. v2: remove useless 48b PPGTT check Suggested-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Matthew Auld authored
Try to mix sg page sizes for 4K, 64K and 2M pages. v2: s/BIT(x) >> 12/BIT(x) >> PAGE_SHIFT/ Suggested-by:
-
Matthew Auld authored
v2: mock test page support configurations and add MI_STORE_DWORD test v3: run all mockable huge page tests on all platforms via the mock_device v4: add pin_update regression test various improvements suggested by Chris v5: fix issues reported by kbuild test single sg spanning multiple page sizes don't explode when running the live-tests through the appgtt v6: lots of improvements from Chris v7: run on each engine for igt_write_huge add simple tmpfs fallback test v8: size_t is bad don't break the i386 build Signed-off-by: -
Matthew Auld authored
Good to know, mostly for debugging purposes. v2: some improvements from Chris Signed-off-by:
-
Matthew Auld authored
Now that we support multiple page sizes for the ppgtt, it would be useful to track the real usage for debugging purposes. Signed-off-by:
-
Matthew Auld authored
Support inserting 64K pages into the 48b PPGTT. v2: check for 64K scratch v3: we should only have to re-adjust maybe_64K at every sg interval Signed-off-by:
-
Matthew Auld authored
Before we can fully enable 64K pages, we need to first support a 64K scratch page if we intend to support the case where we have object sizes < 2M, since any scratch PTE must also point to a 64K region. Without this our 64K usage is limited to objects which completely fill the page-table, and therefore don't need any scratch. v2: add reminder about why 48b PPGTT Reported-by:
-
