- 23 Sep, 2015 27 commits
-
-
Joe Perches authored
It's clearer to use function pointer calls directly instead of the macro indirections of ARCRESET, ACOMMAND, ASTATUS, and AINTMASK. Remove the now unused macros too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Simplify and make consistent the current uses of readb/writeb by using the newly introduced arcnet_<I/O> equivalents. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Simplify and make consistent the current uses of readb/writeb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Use the same indirection as the other arcnet_<I/O> macros. Neither of these new macros add the BUS_ALIGN use for 8 bit devices on 16 bit busses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets There is an register offset, 8, that is unnamed and used as-is. o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate o Create static inline com20020_set_subaddress for the SET_SUBADR macro There is an unused arcnet config entry CONFIGSA100_CT6001 which added a special #define BUS_ALIGN which was introduced but never used in fullhist git tree commit 22cfce4b82b0 ("[ARCNET]: Fixes.") in Nov 2004 for Linux v2.6.10. This BUS_ALIGN #define tries to allow 8 bit devices to work on a 16 bit bus by aligning addresses to 16 bit boundaries. Move this currently unused CONFIG_SA1100_CT6001 BUS_ALIGN macro from com20020.h to arcdevice.h. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
arcnet uses an I/O scheme which can align I/O addresses to word boundaries on different architectures. Add arcnet specific macros which can hide this alignment calculation. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Might as well be specific about the use of this array. Add a commment questioning the indexing too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
These #include files don't need to be in the include/linux directory as they can be local to drivers/net/arcnet/ Move them and update the #include statements. Update the MAINTAINERS file pattern by deleting arcdevice from the NETWORKING block as arcnet is currently unmaintained. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Just neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Make sure the arguments are tested appropriately when not using this function. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Use direct tests of pointer instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Move the assignment above the if like general kernel style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Alloc failures have generic stack dumps so these are redundant. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Use the normal kernel style for EXPORT_SYMBOL. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Use the more current logging style. Remove #define VERSION, use pr_info normally. Add pr_fmt with "arcnet:" prefixes and KBUILD_MODNAME. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
These macros don't actually represent BUG uses but are more commonly used as logging macros, so use a more kernel style macro. Convert the BUGMSG from a netdev_ like use to actually use netdev_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Don't hide what should be obvious. Make the macro a simple test instead of using if and test. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
These macros are actually printk and pr_cont uses with a flag. Add a new BUGLVL_TEST macro which is just the "should use" test and not an odd "if (<foo>)" macro to simplify uses in a new patch. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Conformity can be useful. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Use the preferred kernel include path for asm paths. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Using coalesced strings helps grep for specific messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Move braces normal kernel locations. Add missing braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Use a more current kernel line style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Standardized spacing is easier to read. git diff -w shows no differences. objdiff shows no differences. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Joe Perches authored
Standardized spacing is easier to read. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
-
- 22 Sep, 2015 13 commits
-
-
Andrzej Hajda authored
skb->len is always non-negative. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
Thresholds uses -1 to indicate that default value should be used. Since thresholds are unsigned sign checking makes no sense. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
Thresholds uses -1 to indicate that default value should be used. Since thresholds are unsigned sign checking makes no sense. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
To avoid underflows signed variables should be used in expression. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
Unsigned minus constant is still unsigned so checking its sign makes no sense. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
Variable can store negative values. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
phy_mode can be negative. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrzej Hajda authored
Difference of unsigned values is also unsigned so it does not make sense to check its sign. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree in this 4.4 development cycle, they are: 1) Schedule ICMP traffic to IPVS instances, this introduces a new schedule_icmp proc knob to enable/disable it. By default is off to retain the old behaviour. Patchset from Alex Gartrell. I'm also including what Alex originally said for the record: "The configuration of ipvs at Facebook is relatively straightforward. All ipvs instances bgp advertise a set of VIPs and the network prefers the nearest one or uses ECMP in the event of a tie. For the uninitiated, ECMP deterministically and statelessly load balances by hashing the packet (usually a 5-tuple of protocol, saddr, daddr, sport, and dport) and using that number as an index (basic hash table type logic). The problem is that ICMP packets (which contain really important information like whether or not an MTU has been exceeded) will get a different hash value and may end up at a different ipvs instance. With no information about where to route these packets, they are dropped, creating ICMP black holes and breaking Path MTU discovery. Suddenly, my mom's pictures can't load and I'm fielding midday calls that I want nothing to do with. To address this, this patch set introduces the ability to schedule icmp packets which is gated by a sysctl net.ipv4.vs.schedule_icmp. If set to 0, the old behavior is maintained -- otherwise ICMP packets are scheduled." 2) Add another proc entry to ignore tunneled packets to avoid routing loops from IPVS, also from Alex. 3) Fifteen patches from Eric Biederman to: * Stop passing nf_hook_ops as parameter to the hook and use the state hook object instead all around the netfilter code, so only the private data pointer is passed to the registered hook function. * Now that we've got state->net, propagate the netns pointer to netfilter hook clients to avoid its computation over and over again. A good example of how this has been simplified is the former TEE target (now nf_dup infrastructure) since it has killed the ugly pick_net() function. There's another round of netns updates from Eric Biederman making the line. To avoid the patchbomb again to almost all the networking mailing list (that is 84 patches) I'd suggest we send you a pull request with no patches or let me know if you prefer a better way. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mugunthan V N says: ==================== Add support for reading macid when DT macid not found Did a boot test on dra7-evm [1] and am437x-gp-evm [2]. Pushed a branch [3] for others to test the patch. [1]: http://pastebin.ubuntu.com/12513420/ [2]: http://pastebin.ubuntu.com/12513428/ [3]: git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git cpsw-macid-read-support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
There are 2 MACIDs stored in the control module of the am4372. These are read by the cpsw driver if no valid MACID was found in the devicetree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
There are 2 MACIDs stored in the control module of the dra7. These are read by the cpsw driver if no valid MACID was found in the devicetree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-