bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"ethernet.h" is included in three files but only "rtw_recv.c" using two macros
defined in "ethernet.h", so move used macros in "rtw_recv.c" and
remove "include/ethernet.h" header file and inclusion of this header file.

v2:
First version of this patch failed to apply.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

My static checker found some slightly inaccurate format codes in printf
calls in comedi_fops.c and drivers/comedi_bond.c.  It may be slightly
pedantic to change them, but using the correctly corresponding format
codes is probably a good idea.  All but one were unsigned ints that were
formatted with %i, change these to %u, and one was an int formatted with
%u, we want to format this with %d.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch displays below errors for bypasslib/bp_ioctl.h file

	 ERROR: Macros with complex values should be enclosed in parenthesis
Hence added parenthesis for macros with complex values.
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1) Deleted  bp_proc_create() declaration from bp_mod.h,
because it is declared as static in bpctl_mod.c and not used anywhere.

2) checkpatch warns about
     WARNING: externs should be avoided in .c files

because we have function declarations in bptcl_mod.c,These
functions are not used anywhere else so made them static.
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It looks like lustre_generic_file_{read,write} are a holdover from
2.6.19 where generic_file_aio_read() replaced generic_file_readv()
and cross-kernel interoperability was required for some period of
time. Lustre has since removed support for those older kernels, but
it looks like the wrappers were not deleted at that time. This patch
will delete them.

Pass &iocb->ki_pos as the last argument for these functions instead
of crw_pos, since this is the convention for other callers.  Verify
that this is the same as the current crw_pos argument.  This code can
likely be cleaned up further in a later patch.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers and cleanups for IIO in the 3.15 cycle.

New drivers:
* si7005 relative humidity and temperature sensor
* Lite-on ltr501 ambient light and proximity sensor

Cleanups
* Clean up some dead comments in max1363
* Drop some obsolete variables in adjd_s311 and tcs3472 left over from
  the introduction of iio_push_to_buffers_with_timestamp.
* Drop some unneeded linux/init.h includes
* Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
* A number of cleanups and fixes for sca3000
* Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
* Drop a platform_set_drvdata in viperboard after the only use of it was
  removed during a devm conversion.
* Add a missing device name for ak8975 to comply with the ABI.
* Put mpu6050 into the IMU menu as it slipped out into the main menu.
* Fix a typo and some comment formatting in mpu6050.
* Document at91 ADC clock properties.

Do not call kfree() till timer function is finished.

[This was found using grep. Compilation tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These debugging macros are seldom used for debugging once the driver
is working. If routine tracing is needed, it can be added on an
individual basis.

In a few cases, removal of the exit macro left a bare label. In these
cases, a go to that label was replaced by a return.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver contains a macro that gets the next item in a linked list.
Replace it with a simple copy of the pointer.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver has its own implementation of a "container_of" macro. It
is replaced with the standard container_of version. Most of these
are a straight one-to-one replacement; however, a few of the instances
referred to the member of a union. Those were replaced with the
struct that is part of that union.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The headers for this driver contain a number of unused structs and macros
that are removed. File include/ioctl_cfg80211.h is now empty and was
deleted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After the previous cleanups, file hal/odm_interface.c is now empty. It
is hereby deleted, and removed from Makefile.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This wrapper is replaced with a simple memcmp(). As the wrapper inverts the
logic of memcmp(), care needed to be taken.

This patch also adds one include of vmalloc.h that was missed in a previous
patch.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding a MAINTAINERS entry with content from the README.
Move the TODO items from the README to a separate TODO file.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not call kfree() till timer function is finished.

[This was found using grep. Compiled tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"ip.h" is included in four files but not being used, so
remove "include/ip.h" header file and inclusion of this header file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"if_ether.h" is included in three files but not being used, so
remove "include/if_ether.h" header file and inclusion of this header file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- WARNING: missing space after return type
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- WARNING: Multiple spaces after return type
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Warning:
 - Unnecessary space after function pointer name
 - quoted string split across lines
 - fix alignment issues

Error:
 - return is not a function, parentheses are not required
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Whitespace between #define keyword and BINDER_* constants are space in
some point and tab in some point. Using space or tab is just writer's
choice. But, let's use them more consistently.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We allocate bdev and then krealloc the devs pointer in order to add bdev
at the end of the devpriv->devs array list.  But if for some reason this
krealloc fails, we need to free bdev before returning an error otherwise
this memory is leaked.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are references to four undefined Kconfig macros in the code.
Remove these as the checks for them will always evaluate to false.

There are additional cleanups possible now, but I'll gladly leave those
to people that are actually familiar with the code.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Two Kconfig entries for this driver default to (uppercase) "Y". But in
Kconfig (lowercase) "y" is a magic symbol. "Y" is an ordinary symbol.
As "Y" is never set these Kconfig symbols will also not be set by
default.

So use "default y" here, as was clearly intended.
Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed multiple coding style errors and warnings
wifi.h:1077: WARNING: please, no space before tabs
wifi.h:762: WARNING: missing space after struct definition
wifi.h:972: WARNING: please, no spaces at the start of a line
wifi.h:1825: WARNING: Unnecessary space after function pointer name
wifi.h:1826: ERROR: "foo * bar" should be "foo *bar"
wifi.h:1099: WARNING: missing space after return type
wifi.h:1320: ERROR: Macros with complex values should be enclosed in parenthesis
wifi.h:1758: WARNING: Multiple spaces after return type
wifi.h:1855: ERROR: code indent should use tabs where possible
wifi.h:2303: ERROR: space prohibited after that open parenthesis '('
wifi.h:2408: ERROR: spaces required around that '=' (ctx:VxV)
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 2397c6e0 entitled "staging: r8188eu:
Remove wrappers around vmalloc and vzalloc" and
commit: 03bd6aea entitled "staging: r8188eu:
Remove wrappers around vfree" failed to add the header file needed
to provide vzalloc and vfree.

This problem was reported by the kbuild test robot.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In kernel 3.11 O_TMPFILE was introduced, but the open flag value
conflicts with the O_LOV_DELAY_CREATE flag 020000000 previously used
by Lustre-aware applications.  O_LOV_DELAY_CREATE allows applications
to defer file layout and object creation from open time (the default)
until it can instead be specified by the application using an ioctl.

Instead of trying to find a non-conflicting O_LOV_DELAY_CREATE flag
or define a Lustre-specific flag that isn't of use to most/any other
filesystems, use (O_NOCTTY|FASYNC) as the new value.  These flags
are not meaningful for newly-created regular files and should be
OK since O_LOV_DELAY_CREATE is only meaningful for new files.

I looked into using O_ACCMODE/FMODE_WRITE_IOCTL, which allows calling
ioctl() on the minimally-opened fd and is close to what is needed,
but that doesn't allow specifying the actual read or write mode for
the file, and fcntl(F_SETFL) doesn't allow O_RDONLY/O_WRONLY/O_RDWR
to be set after the file is opened.

Lustre-change: http://review.whamcloud.com/8312
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4209Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An early return from llog_cat_process_cb() was leaking the llog
handle. Fix this by not doing that.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/7847
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4054Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch separates ACL and XATTR caches, so that
when updating an ACL only LOOKUP lock is needed and
when updating another XATTR only XATTR lock is needed.

This patch also reverts XATTR cache support for setxattr
because client performing REINT under even PR lock
will deadlock if an active server operation (like unlink)
attempts to cancel all locks, and setxattr has to wait
for it (MDC max-in-flight is 1).

This patch disables the r/o cache if the data is
unreasonably large (larger than maximum single EA
size).
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/7208
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3669Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>