- 06 Aug, 2020 5 commits
-
-
Vaibhav Gupta authored
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state() and pci_enable/disable_device() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from struct "pci_driver". Compile-tested only. Signed-off-by:
-
Jian-Jia Su authored
V4L2_CAP_VIDEO_M2M is documented as 0x00004000 V4L2_CAP_VIDEO_M2M_MPLANE is documented as 0x00008000 This is different from the definition in include/uapi/linux/videodev2.h Signed-off-by:
Jian-Jia Su <jjsu@chromium.org> Reviewed-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Colton Lewis authored
Silence documentation build warnings by correcting kernel-doc comment v4l2_subdev_get_fwnode_pad_1_to_1 function ./include/media/v4l2-subdev.h:1045: warning: Function parameter or member 'entity' not described in 'v4l2_subdev_get_fwnode_pad_1_to_1' ./include/media/v4l2-subdev.h:1045: warning: Function parameter or member 'endpoint' not described in 'v4l2_subdev_get_fwnode_pad_1_to_1' Signed-off-by:
Colton Lewis <colton.w.lewis@protonmail.com> Signed-off-by:
-
Colton Lewis authored
Silence documentation build warnings by correcting kernel-doc comment v4l2_create_fwnode_links_to_pad and v4l2_create_fwnode_links functions. ./include/media/v4l2-mc.h:110: warning: Function parameter or member 'src_sd' not described in 'v4l2_create_fwnode_links_to_pad' ./include/media/v4l2-mc.h:110: warning: Function parameter or member 'sink' not described in 'v4l2_create_fwnode_links_to_pad' ./include/media/v4l2-mc.h:134: warning: Function parameter or member 'src_sd' not described in 'v4l2_create_fwnode_links' ./include/media/v4l2-mc.h:134: warning: Function parameter or member 'sink_sd' not described in 'v4l2_create_fwnode_links' Signed-off-by:
-
- 19 Jul, 2020 35 commits
-
-
Hans Verkuil authored
Having the '*' in the next line separated from the type makes it hard to see that these functions return a pointer to that type. Instead, keep it next to the type name so it is clear that it is a pointer to that type. Signed-off-by:
-
Hans Verkuil authored
Having the '*' in the next line separated from the type makes it hard to see that these functions return a pointer to that type. Instead, keep it next to the type name so it is clear that it is a pointer to that type. Signed-off-by:
-
Ezequiel Garcia authored
For debugging purposes, seeing the state integer representation is really inconvenient. Improve this and be developer-friendly by printing the state name instead. Suggested-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Hans Verkuil authored
The description was missing V4L2_XFER_FUNC_SRGB in the description of what V4L2_COLORSPACE_JPEG stands for. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state() which is not recommended. Compile-Tested only. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state() which is not recommended. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. [hverkuil: fixes checkpatch alignment warning] Signed-off-by:
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from struct "pci_driver". Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from struct "pci_driver". Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable_device(), pci_save/restore_sate(), etc. Compile-tested only. Signed-off-by:
-
Laurent Pinchart authored
The power-domains and resets properties are used in all DT sources in the kernel but are absent from the bindings. Document them and make them mandatory. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car VSP1 text binding to YAML. Signed-off-by:
-
Laurent Pinchart authored
The resets property is used in DT sources in the kernel tree. Document it and make it mandatory. Signed-off-by:
-
Laurent Pinchart authored
All DT source files in the kernel tree specify the power-domains property. Make it mandatory. Signed-off-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car FDP1 text binding to YAML. Signed-off-by:
-
Laurent Pinchart authored
The resets and iommus properties are used in DT sources in the kernel tree. Document them, and make resets mandatory. The iommus property is optional as not all platforms wire the FCP to a functional IOMMU. Signed-off-by:
-
Laurent Pinchart authored
All DT source files in the kernel tree specify the power-domains property. Make it mandatory. Signed-off-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car FCP text binding to YAML. Signed-off-by:
-
Laurent Pinchart authored
When a notifier supplies a device fwnode and a subdev supplies an endpoint fwnode, incorrect matches may occur if multiple subdevs correspond to the same device fwnode. This can't be handled transparently in the framework, and requires the notifier to switch to endpoint fwnodes. Log a message to notify of this problem. A second message is added to help accelerating the transition to endpoint matching. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
The notifier is useful to match functions to access information about the device matching a subdev. This will be used to print messages using the correct struct device and driver name. Signed-off-by:
-
Laurent Pinchart authored
fwnode matching was designed to match on nodes corresponding to a device. Some drivers, however, needed to match on endpoints, and have passed endpoint fwnodes to v4l2-async. This works when both the subdev and the notifier use the same fwnode types (endpoint or device), but makes drivers that use different types incompatible. Fix this by extending the fwnode match to handle fwnodes of different types. When the types (deduced from the presence of remote endpoints) are different, retrieve the device fwnode for the side that provides an endpoint fwnode, and compare it with the device fwnode provided by the other side. This allows interoperability between all drivers, regardless of which type of fwnode they use for matching. Signed-off-by:
-
Laurent Pinchart authored
Drivers may need to test if a fwnode is a graph endpoint. To avoid hand-written solutions that wouldn't work for all fwnode types, add a new fwnode_graph_is_endpoint() function for this purpose. We don't need to wire it up to different backends for OF and ACPI for now, as the implementation can simply be based on checkout the presence of a remote-endpoint property. Signed-off-by:
-
Jacopo Mondi authored
The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer. The GMSL link carries power, control (I2C) and video data over a single coax cable. Signed-off-by:
-
Jacopo Mondi authored
The IMI RDACM20 and IMI RDACM21 are Gigabit Multimedia Serial Link (GMSL) camera capable of transmitting video and I2C control messages on a coax cable physical link for automotive applications. Document their device tree bindings. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Kieran Bingham authored
The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and CSI-2 output. The device supports multicamera streaming applications, and features the ability to synchronise the attached cameras. CSI-2 output can be configured with 1 to 4 lanes, and a control channel is supported over I2C, which implements an I2C mux to facilitate communications with connected cameras across the reverse control channel. Signed-off-by:
-
Laurent Pinchart authored
The MAX9286 deserializes video data received on up to 4 Gigabit Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up to 4 data lanes. Signed-off-by:
-
Dongchun Zhu authored
Add a V4L2 sub-device driver for DW9768 voice coil motor, providing control to set the desired focus via IIC serial interface. Signed-off-by:
Dongchun Zhu <dongchun.zhu@mediatek.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Dongchun Zhu authored
Add DeviceTree Binding Documentation for Dongwoon Anatech DW9768 voice coil actuator. Reviewed-by:
-
Andrey Konovalov authored
This fixes checkpatch warnings of "msleep < 20ms can sleep for up to 20ms". Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
-
Dafna Hirschfeld authored
Currently the 'pads' and 'pad_cfg' arrays of the rkisp1_resizer are of size 'RKISP1_ISP_PAD_MAX' which is 4. But the resizer has only two pads. Change the size of the arrays to 2 by adding and using 'RKISP1_RSZ_PAD_MAX' similar to the way it is done in the isp entity. [hverkuil: fix typos in commit log] Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
-
Dafna Hirschfeld authored
The field alloc_ctx in struct rkisp1_device is not used. This patch removes it. Signed-off-by:
-
Dafna Hirschfeld authored
The field ctrl_handler in struct rkisp1_device is not used. This patch removes it. Signed-off-by:
-
Dafna Hirschfeld authored
media: staging: rkisp1: cap: in stream start, replace calls to rkisp1_handle_buffer with rkisp1_set_next_buf The function 'rkisp1_stream_start' calls 'rkisp1_handle_buffer' in order to update the 'buf.curr' and 'buf.next' fields and configure the device before streaming starts. This cause a wrong increment of the debugs field 'frame_drop'. This patch replaces the call to 'rkisp1_handle_buffer' with a call to 'rkisp1_set_next_buf'. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'rkisp1_set_next_buf' configures the registers according to 'cap->buf.next'. It is called after updating 'cap->buf.next' and 'cap->buf.curr'. This patch moves the code that updates those fields to rkisp1_set_next_buf. This is a preparation for later patch that change a call to 'rkisp1_handle_buffer' with a call to 'rkisp1_set_next_buf'. Signed-off-by:
-
Dafna Hirschfeld authored
The spinlock buf.lock should protect access to the buffers. This includes the buffers in buf.queue and also buf.curr and buf.next. The function 'rkisp1_set_next_buf' access buf.next therefore it should also be protected with the lock. Signed-off-by:
-
