- 30 Oct, 2005 7 commits
-
-
Seth, Rohit authored
Set the low water mark for hot pages in pcp to zero. (akpm: for the life of me I cannot remember why we created pcp->low. Neither can Martin and the changelog is silent. Maybe it was just a brainfart, but I have this feeling that there was a reason. If not, we should remove the fields completely. We'll see.) Signed-off-by: Rohit Seth <rohit.seth@intel.com> Cc: <linux-mm@kvack.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Seth, Rohit authored
Increase the page allocator's per-cpu magazines from 1/4MB to 1/2MB. Over 100+ runs for a workload, the difference in mean is about 2%. The best results for both are almost same. Though the max variation in results with 1/2MB is only 2.2%, whereas with 1/4MB it is 12%. Signed-off-by: Rohit Seth <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Rik Van Riel authored
It turns out that the original swap token implementation, by Song Jiang, only enforced the swap token while the task holding the token is handling a page fault. This patch approximates that, without adding an additional flag to the mm_struct, by checking whether the mm->mmap_sem is held for reading, like the page fault code does. This patch has the effect of automatically, and gradually, disabling the enforcement of the swap token when there is little or no paging going on, and "turning up" the intensity of the swap token code the more the task holding the token is thrashing. Thanks to Song Jiang for pointing out this aspect of the token based thrashing control concept. The new code shows a slight degradation over the old swap token code, but still a big win over running without the swap token. 2.6.12+ swap token disabled $ for i in `seq 10` ; do /usr/bin/time ./qsbench -n 30000000 -p 3 ; done 101.74user 23.13system 8:26.91elapsed 24%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (38597major+430315minor)pagefaults 0swaps 101.98user 24.91system 8:03.06elapsed 26%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (33939major+430457minor)pagefaults 0swaps 101.93user 22.12system 7:34.90elapsed 27%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (33166major+421267minor)pagefaults 0swaps 101.82user 22.38system 8:31.40elapsed 24%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (39338major+433262minor)pagefaults 0swaps 2.6.12+ swap token enabled, timeout 300 seconds $ for i in `seq 4` ; do /usr/bin/time ./qsbench -n 30000000 -p 3 ; done 102.58user 16.08system 3:41.44elapsed 53%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (19707major+285786minor)pagefaults 0swaps 102.07user 19.56system 4:00.64elapsed 50%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (19012major+299259minor)pagefaults 0swaps 102.64user 18.25system 4:07.31elapsed 48%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (21990major+304831minor)pagefaults 0swaps 101.39user 19.41system 5:15.81elapsed 38%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (24850major+323321minor)pagefaults 0swaps 2.6.12+ with new swap token code, timeout 300 seconds $ for i in `seq 4` ; do /usr/bin/time ./qsbench -n 30000000 -p 3 ; done 101.87user 24.66system 5:53.20elapsed 35%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (26848major+363497minor)pagefaults 0swaps 102.83user 19.95system 4:17.25elapsed 47%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (19946major+305722minor)pagefaults 0swaps 102.09user 19.46system 5:12.57elapsed 38%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (25461major+334994minor)pagefaults 0swaps 101.67user 20.61system 4:52.97elapsed 41%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (22190major+329508minor)pagefaults 0swaps Signed-off-by: Rik Van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Rik Van Riel authored
Add sem_is_read/write_locked functions to the read/write semaphores, along the same lines of the *_is_locked spinlock functions. The swap token tuning patch uses sem_is_read_locked; sem_is_write_locked is added for completeness. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ivan Kokshaysky authored
barrier.h uses barrier() in non-SMP case. And doesn't include compiler.h. Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
YOSHIFUJI Hideaki authored
Add missing compensation for (HZ == 250) != (1 << SHIFT_HZ) in second_overflow(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
This patch adds vmalloc_node(size, node) -> Allocate necessary memory on the specified node and get_vm_area_node(size, flags, node) and the other functions that it depends on. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 29 Oct, 2005 33 commits
-
-
Linus Torvalds authored
-
Nicolas Pitre authored
Patch from Nicolas Pitre Since vmlinux.lds.S is preprocessed, we can use the defines already present in asm/memory.h (allowed by patch #3060) for the XIP kernel link address instead of relying on a duplicated Makefile hardcoded value, and also get rid of its dependency on awk to handle it at the same time. While at it let's clean XIP stuff even further and make things clearer in head.S with a nice code reduction. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Patch from Nicolas Pitre This patch allows for assorted type of cleanups by letting assembly code use the same set of defines for constant values and avoid duplicated definitions that might not always be in sync, or that might simply be confusing due to the different names for the same thing. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Arthur Othieno authored
Some boards declare prom_free_prom_memory as a void function but the caller free_initmem() expects a return value. Fix those up and return 0 instead, just like everyone else does. Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
by emulation of a full FPU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Prefetching may be fatal on some systems if we're prefetching beyond the end of memory on some systems. It's also a seriously bad idea on non dma-coherent systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Limit the number of cpu type options in the cpu menu to just those types that are actually available for the select platform. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
CFE 1.2.5 and earlier fails to turn on the ExpMemEn bit in the PCIFeatureControl register, which means that DMA does not work beyond physical address 01_0000_0000, ergo to DRAM beyond 1GB. With ExpMemEn turned on, 01_0000_0000-0f_ffff_ffff is mapped, so DMA works for up to 61 GB of DRAM. Will be fixed in CFE 1.2.6 (yet to be released). Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board. Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
Expand SB1 cache error handling by adding SB1_CEX_ALWAYS_FATAL and SB1_CEX_STALL, allowing configurable behavior on cache errors. Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
- Kconfig and Makefile changes - arch/mips/sibyte/bcm1480/ - changes to sibyte common code to support 1480 Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
Update sibyte headers to match Broadcom internal copies: - comment cleanup and updates - fix LittleSur part number to match the board silkscreen Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Andrew Isaacson authored
Add header files for BCM1480/1280/1455/1255 family of chips, and update sb1250 headers which are shared by BCM1480 family. Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h new file mode 100644
-
Andrew Isaacson authored
Fix typo in cpu_probe_sibyte. Signed-Off-By: Andy Isaacson <adi@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Cacheflush(0, 0, 0) was crashing the system. This is because flush_icache_range(start, end) tries to flushing whole address space (0 - ~0UL) if both start and end are zero. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
First argument of fpu_emulator_cop1Handler() was unused. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-