Add format and argument checking and fix misuses in the dbg macro.

Add __printf
Use %pR for resource
Add #include guard to samsung.h
Move static functions from .h to .c
Use vscnprintf instead of length unguarded vsprintf
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't activate the TX Space available IRQ on startup, or a simple
$ cat /dev/ttyHSU0
will cause an endless amount of IRQs, as there is always space in
the TX FIFO available if no data is going to be sent.

Also correct comments for IRQ names (RX and TX swapped).
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On my test platform (B2020/STiH416) the serial port issues bad characters
during the initial message avalanche as the console comes up. The problem
also occurs when dense(ish) I/O is done using the polled I/O interface.

The problem is fixed for me by using the FIFO half-empty bit rather than
FIFO full bit. Note that using the half-empty bit causes the FIFO to be
managed in a similar way to interrupt based I/O (i.e. where the hardware
gets best test coverage).

Running the FIFO half full will have no impact (good or bad) on console
performance. The UART will still remain fully saturated and the busy-wait
until the FIFO is empty in asc_console_write() will complete at the same
time.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xilinx MDM (Microblaze Debug Module) also contains
uart interface via JTAG which is compatible with
uartlite driver. This interface is really slow
that's why timeout is setup to 1s.

Make this time delay not to be cpu speed dependent.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If NO_DMA=y:

drivers/built-in.o: In function `lpuart_dma_rx_free':
fsl_lpuart.c:(.text+0x7da28): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `lpuart_dma_tx_free':
fsl_lpuart.c:(.text+0x7da60): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `lpuart_dma_rx':
fsl_lpuart.c:(.text+0x7dab8): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `lpuart_dma_tx':
fsl_lpuart.c:(.text+0x7db7e): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `lpuart_copy_rx_to_tty':
fsl_lpuart.c:(.text+0x7dcd4): undefined reference to `dma_sync_single_for_cpu'
make[3]: *** [vmlinux] Error 1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fb78b811 provide a workaround for
kernel panic, but bring potential deadlock risk. that is in
sirfsoc_rx_tmo_process_tl while enter into sirfsoc_uart_pio_rx_chars
cpu hold uart_port->lock, if uart interrupt comes cpu enter into
sirfsoc_uart_isr and deadlock occurs in getting uart_port->lock.

the patch replace spin_lock version to spin_lock_irq* version to avoid
spinlock dead lock issue. let function tty_flip_buffer_push in tasklet
outof spin_lock_irq* protect area to avoid add the pair of spin_lock and
spin_unlock for tty_flip_buffer_push.
BTW drop self defined unused spinlock protect of tx_lock/rx_lock.

56274.220464] BUG: spinlock lockup suspected on CPU#0, swapper/0/0
[56274.223648]  lock: 0xc05d9db0, .magic: dead4ead, .owner: swapper/0/0,
	.owner_cpu: 0
	[56274.231278] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G
	O 3.10.35 #1
	[56274.238241] [<c0015530>] (unwind_backtrace+0x0/0xf4) from
	[<c00120d8>] (show_stack+0x10/0x14)
	[56274.246742] [<c00120d8>] (show_stack+0x10/0x14) from
	[<c01b11b0>] (do_raw_spin_lock+0x110/0x184)
	[56274.255501] [<c01b11b0>] (do_raw_spin_lock+0x110/0x184) from
	[<c02124c8>] (sirfsoc_uart_isr+0x20/0x42c)
	[56274.264874] [<c02124c8>] (sirfsoc_uart_isr+0x20/0x42c) from
	[<c0075790>] (handle_irq_event_percpu+0x54/0x17c)
	[56274.274758] [<c0075790>] (handle_irq_event_percpu+0x54/0x17c)
	from [<c00758f4>] (handle_irq_event+0x3c/0x5c)
	[56274.284561] [<c00758f4>] (handle_irq_event+0x3c/0x5c) from
	[<c0077fa0>] (handle_level_irq+0x98/0xfc)
	[56274.293670] [<c0077fa0>] (handle_level_irq+0x98/0xfc) from
	[<c0074f44>] (generic_handle_irq+0x2c/0x3c)
	[56274.302952] [<c0074f44>] (generic_handle_irq+0x2c/0x3c) from
	[<c000ef80>] (handle_IRQ+0x40/0x90)
	[56274.311706] [<c000ef80>] (handle_IRQ+0x40/0x90) from
	[<c000dc80>] (__irq_svc+0x40/0x70)
	[56274.319697] [<c000dc80>] (__irq_svc+0x40/0x70) from
	[<c038113c>] (_raw_spin_unlock_irqrestore+0x10/0x48)
	[56274.329158] [<c038113c>]
	(_raw_spin_unlock_irqrestore+0x10/0x48) from [<c0200034>]
	(tty_port_tty_get+0x58/0x90)
	[56274.339213] [<c0200034>] (tty_port_tty_get+0x58/0x90) from
	[<c0212008>] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8)
	[56274.349097] [<c0212008>]
	(sirfsoc_uart_pio_rx_chars+0x1c/0xc8) from [<c0212ef8>]
	(sirfsoc_rx_tmo_process_tl+0xe4/0x1fc)
	[56274.359853] [<c0212ef8>]
	(sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) from [<c0027c04>]
	(tasklet_action+0x84/0x114)
	[56274.369739] [<c0027c04>] (tasklet_action+0x84/0x114) from
	[<c0027db4>] (__do_softirq+0x120/0x200)
	[56274.378585] [<c0027db4>] (__do_softirq+0x120/0x200) from
	[<c0027f44>] (do_softirq+0x54/0x5c)
	[56274.386998] [<c0027f44>] (do_softirq+0x54/0x5c) from
	[<c00281ec>] (irq_exit+0x9c/0xd0)
	[56274.394899] [<c00281ec>] (irq_exit+0x9c/0xd0) from
	[<c000ef84>] (handle_IRQ+0x44/0x90)
	[56274.402790] [<c000ef84>] (handle_IRQ+0x44/0x90) from
	[<c000dc80>] (__irq_svc+0x40/0x70)
	[56274.410774] [<c000dc80>] (__irq_svc+0x40/0x70) from
	[<c0288af4>] (cpuidle_enter_state+0x50/0xe0)
	[56274.419532] [<c0288af4>] (cpuidle_enter_state+0x50/0xe0) from
	[<c0288c34>] (cpuidle_idle_call+0xb0/0x148)
	[56274.429080] [<c0288c34>] (cpuidle_idle_call+0xb0/0x148) from
	[<c000f3ac>] (arch_cpu_idle+0x8/0x38)
	[56274.438016] [<c000f3ac>] (arch_cpu_idle+0x8/0x38) from
	[<c0059344>] (cpu_startup_entry+0xfc/0x140)
	[56274.446956] [<c0059344>] (cpu_startup_entry+0xfc/0x140) from
	[<c04a3a54>] (start_kernel+0x2d8/0x2e4)
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All SiRFSoC UART registers are in 32-bits. If we use writeb for
TXFIFO, actually all of 32-bits are still written, for TXTIFO,
only low 8-bits are valid, so in prima2&atlas6, this causes no
problem.
But in the new atlas7, using writeb to write UART registers will
cause an imprecise data abort as HW does check the "wrong" writeb.
So move to writel and this also makes the code consistent with
sirfsoc_uart_pio_tx_chars() in which we use writel.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Two new drivers have been added since 3.14, the MEN 16z135 uart, and
the ARM semihosting console. Both are missing an explicit 'select
SERIAL_CORE', which can leads build errors when no other driver
selects the core, as found during ARM randconfig testing.
In case of the ARM semihosting console, we also have to select
SERIAL_CORE_CONSOLE.

This adds the missing 'select' statements.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the warnings:

   drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_handle_rx':
>> drivers/tty/serial/sc16is7xx.c:548:1: warning: 'sc16is7xx_handle_rx' uses dynamic stack allocation [enabled by default]
   drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_handle_tx':
>> drivers/tty/serial/sc16is7xx.c:589:1: warning: 'sc16is7xx_handle_tx' uses dynamic stack allocation [enabled by default]
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sc16is7xx.c:1060:12: warning: 'sc16is7xx_probe' defined but not used [-Wunused-function]
 static int sc16is7xx_probe(struct device *dev,
            ^
drivers/tty/serial/sc16is7xx.c:1176:12: warning: 'sc16is7xx_remove' defined but not used [-Wunused-function]
 static int sc16is7xx_remove(struct device *dev)
            ^
drivers/tty/serial/sc16is7xx.c:1215:29: warning: 'regcfg' defined but not used [-Wunused-variable]
 static struct regmap_config regcfg = {
                             ^

Fixed these warnings by removing the `#ifdef CONFIG_REGMAP_I2C' around their
calls as this driver selects REGMAP_I2C in Kconfig. This part of driver just
didn't compile at all when REGMAP_I2C configured as module (CONFIG_REGMAP_I2C
is not defined, just CONFIG_REGMAP_I2C_MODULE).
Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On initialization failure, an error message is already printed with
level KERN_ERR, no need to print another one with level KERN_INFO.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pch_uart driver is for a companion chip to the Intel Atom E600
series processors. These are 32-bit x86 processors so the driver is
only needed on X86_32. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 9aac5887 (tty/serial: add generic serial earlycon) moved
console option parsing from 8250_early.c and converted to kstrto*
functions from simple_strtoul along the way. However, kstrto* functions
are not equivalent in that they do not allow non-convertible characters
at the end such as "115200n8". Fix this by changing back to
simple_strtoul and ignore what checkpatch.pl says.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit d2fd6810 (tty/serial: convert 8250 to generic earlycon)
removed setup_early_serial8250_console, but there are still 2 callers
in:

arch/mips/mti-malta/malta-init.c
drivers/firmware/pcdp.c

Add back the function implemented as a wrapper to setup_earlycon.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.

Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.

An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.

Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.

Cc: <stable@vger.kernel.org>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This merges the patch to fix possible loss of dirty bit on munmap() or
madvice(DONTNEED).  If there are concurrent writers on other CPU's that
have the unmapped/unneeded page in their TLBs, their writes to the page
could possibly get lost if a third CPU raced with the TLB flush and did
a page_mkclean() before the page was fully written.

Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another
thread is still busy writing to it, you deserve all the lost writes you
could get.  But we kernel people hold ourselves to higher quality
standards than "crazy people deserve to lose", because, well, we've seen
people do all kinds of crazy things.

So let's get it right, just because we can, and we don't have to worry
about it.

* safe-dirty-tlb-flush:
  mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts

Pull btrfs fixes from Chris Mason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: limit the path size in send to PATH_MAX
  Btrfs: correctly set profile flags on seqlock retry
  Btrfs: use correct key when repeating search for extent item
  Btrfs: fix inode caching vs tree log
  Btrfs: fix possible memory leaks in open_ctree()
  Btrfs: avoid triggering bug_on() when we fail to start inode caching task
  Btrfs: move btrfs_{set,clear}_and_info() to ctree.h
  btrfs: replace error code from btrfs_drop_extents
  btrfs: Change the hole range to a more accurate value.
  btrfs: fix use-after-free in mount_subvol()

Pull arm fixes from Russell King:
 "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me
  to take during the merge window.  This stuff should have been better
  tested and sorted out *before* the merge window"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B
  ARM: 8041/1: pj4: fix cpu_is_pj4 check
  ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor
  ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set
  ARM: 8038/1: iwmmxt: explicitly check for supported architectures

Pull arm64 fixes from Catalin Marinas:
 - compat renameat2 syscall wiring and __NR_compat_syscalls fix
 - TLB fix for transparent huge pages following switch to generic
   mmu_gather
 - spinlock initialisation for init_mm's context
 - move of_clk_init() earlier
 - Kconfig duplicate entry fix

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: init: Move of_clk_init to time_init
  arm64: initialize spinlock for init_mm's context
  arm64: debug: remove noisy, pointless warning
  arm64: mm: Add THP TLB entries to general mmu_gather
  arm64: add renameat2 compat syscall
  ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"
  arm64: __NR_compat_syscalls fix

Pull irq fixes from Thomas Gleixner:
 "A slighlty large fix for a subtle issue in the CPU hotplug code of
  certain ARM SoCs, where the not yet online cpu needs to setup the cpu
  local timer and needs to set the interrupt affinity to itself.
  Setting interrupt affinity to a not online cpu is prohibited and
  therefor the timer interrupt ends up on the wrong cpu, which leads to
  nasty complications.

  The SoC folks tried to hack around that in the SoC code in some more
  than nasty ways.  The proper solution is to have a way to enforce the
  affinity setting to a not online cpu.  The core patch to the genirq
  code provides that facility and the follow up patches make use of it
  in the GIC interrupt controller and the exynos timer driver.

  The change to the core code has no implications to existing users,
  except for the rename of the locked function and therefor the
  necessary fixup in mips/cavium.  Aside of that, no runtime impact is
  possible, as none of the existing interrupt chips implements anything
  which depends on the force argument of the irq_set_affinity()
  callback"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Exynos_mct: Register clock event after request_irq()
  clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
  irqchip: Gic: Support forced affinity setting
  genirq: Allow forcing cpu affinity of interrupts

Pull tty/serial fixes from Greg KH:
 "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of
  reported issues in the 8250 and samsung serial drivers, as well as a
  character loss fix for the tty core that was caused by the lock
  removal patches a release ago"

* tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial_core: fix uart PORT_UNKNOWN handling
  serial: samsung: Change barrier() to cpu_relax() in console output
  serial: samsung: don't check config for every character
  serial: samsung: Use the passed in "port", fixing kgdb w/ no console
  serial: 8250: Fix thread unsafe __dma_tx_complete function
  8250_core: Fix unwanted TX chars write
  tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc

Pull staging / IIO driver fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 3.15-rc3.

  Nothing major at all, just some assorted issues that people have
  reported"

* tag 'staging-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data
  iio: adc: mxs-lradc: fix warning when buidling on avr32
  iio: cm36651: Fix i2c client leak and possible NULL pointer dereference
  iio: querying buffer scan_mask should return 0/1
  staging:iio:ad2s1200 fix a missing break
  iio: adc: at91_adc: correct default shtim value
  ARM: at91: at91sam9260: change at91_adc name
  ARM: at91: at91sam9g45: change at91_adc name
  iio: cm32181: Fix read integration time function
  iio: adc: at91_adc: Repair broken platform_data support

Merge tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some kernfs fixes for 3.15-rc3 that resolve some reported
  problems.  Nothing huge, but all needed"

* tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  s390/ccwgroup: Fix memory corruption
  kernfs: add back missing error check in kernfs_fop_mmap()
  kernfs: fix a subdir count leak

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 3.15-rc3.  The majority are gadget
  fixes, as we didn't get any of those in for 3.15-rc2.  The others are
  all over the place, and there's a number of new device id addtions as
  well."

* tag 'usb-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: option: add and update a number of CMOTech devices
  usb: option: add Alcatel L800MA
  usb: option: add Olivetti Olicard 500
  usb: qcserial: add Sierra Wireless MC7305/MC7355
  usb: qcserial: add Sierra Wireless MC73xx
  usb: qcserial: add Sierra Wireless EM7355
  USB: io_ti: fix firmware download on big-endian machines
  usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
  xhci: extend quirk for Renesas cards
  xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  phy: fix kernel oops in phy_lookup()
  phy: restore OMAP_CONTROL_PHY dependencies
  phy: exynos: fix building as a module
  USB: serial: fix sysfs-attribute removal deadlock
  usb: wusbcore: fix panic in wusbhc_chid_set
  usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq
  uwb: don't call spin_unlock_irq in a USB completion handler
  usb: chipidea: coordinate usb phy initialization for different phy type
  ...

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent ACPI regression related to device
  notifications, intel_idle fix related to IvyTown support, fix for a
  buffer size issue in ACPICA, PM core fix related to the "freeze" sleep
  state, four fixes for various types of breakage in cpufreq drivers, a
  PNP workaround for a wrong memory region size in ACPI tables, and a
  fix and cleanup for the ACPI tools Makefile.

  Specifics:

   - Fix for broken ACPI notifications on some systems caused by a
     recent ACPI hotplug commit that blocked the propagation of unknown
     type notifications to device drivers inadvertently.

   - intel_idle fix to make the IvyTown C-states handling (added
     recently) work as intended which now is broken due to missing
     braces.  From Christoph Jaeger.

   - ACPICA fix to make it allocate buffers of the right sizes for the
     Generic Serial Bus operation region access.  From Lv Zheng.

   - PM core fix unblocking cpuidle before entering the "freeze" sleep
     state which causes that state to be able to actually save more
     energy than runtime idle.

   - Configuration and build fixes for the highbank and powernv cpufreq
     drivers from Kefeng Wang and Srivatsa S Bhat.

   - Coccinelle warning fix related to error pointers for the unicore32
     cpufreq driver from Duan Jiong.

   - Integer overflow fix for the ppc-corenet cpufreq driver from Geert
     Uytterhoeven.

   - Workaround for BIOSes that don't report the entire Intel MCH area
     in their ACPI tables from Bjorn Helgaas.

   - ACPI tools Makefile fix and cleanup from Thomas Renninger"

* tag 'pm+acpi-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / notify: Do not block unknown type notifications in root handler
  PNP: Work around BIOS defects in Intel MCH area reporting
  cpufreq: highbank: fix ARM_HIGHBANK_CPUFREQ dependency warning
  cpufreq: ppc: Fix integer overflow in expression
  cpufreq, powernv: Fix build failure on UP
  cpufreq: unicore32: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  PM / suspend: Make cpuidle work in the "freeze" state
  intel_idle: fix IVT idle state table setting
  ACPICA: Fix buffer allocation issue for generic_serial_bus region accesses.
  tools/power/acpi: Minor bugfixes

fs_path_ensure_buf is used to make sure our path buffers for
send are big enough for the path names as we construct them.
The buffer size is limited to 32K by the length field in
the struct.

But bugs in the path construction can end up trying to build
a huge buffer, and we'll do invalid memmmoves when the
buffer length field wraps.

This patch is step one, preventing the overflows.
Signed-off-by: Chris Mason <clm@fb.com>

The mmu-gather operation 'tlb_flush_mmu()' has done two things: the
actual tlb flush operation, and the batched freeing of the pages that
the TLB entries pointed at.

This splits the operation into separate phases, so that the forced
batched flushing done by zap_pte_range() can now do the actual TLB flush
while still holding the page table lock, but delay the batched freeing
of all the pages to after the lock has been dropped.

This in turn allows us to avoid a race condition between
set_page_dirty() (as called by zap_pte_range() when it finds a dirty
shared memory pte) and page_mkclean(): because we now flush all the
dirty page data from the TLB's while holding the pte lock,
page_mkclean() will be held up walking the (recently cleaned) page
tables until after the TLB entries have been flushed from all CPU's.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* pnp:
  PNP: Work around BIOS defects in Intel MCH area reporting

* acpi-hotplug:
  ACPI / notify: Do not block unknown type notifications in root handler

Fix by including linux/uaccess.h:

   drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_ioctl':
>> drivers/tty/serial/sc16is7xx.c:861:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
>> drivers/tty/serial/sc16is7xx.c:867:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull hwmon fixes from Guenter Roeck:
 - ltc2945: Don't unecessarily crash kernel on implementation error
 - vexpress: Fix 'name' and 'label' attributes

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ltc2945) Don't crash the kernel unnecessarily
  hwmon: (vexpress) Avoid creating non-existing attributes
  hwmon: (vexpress) Use legal hwmon device names

Pull SCSI fixes from James Bottomley:
 "This is a set of seven fixes, three (hpsa) and free'd command
  references correcting bugs in the last round of updates and the
  remaining four correcting problems within the SCSI error handler that
  was causing a deadlock within USB"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] More USB deadlock fixes
  [SCSI] Fix USB deadlock caused by SCSI error handling
  [SCSI] Fix command result state propagation
  [SCSI] Fix spurious request sense in error handling
  [SCSI] don't reference freed command in scsi_prep_return
  [SCSI] don't reference freed command in scsi_init_sgtable
  [SCSI] hpsa: fix NULL dereference in hpsa_put_ctlr_into_performant_mode()

Pull ARM SoC fixes from Arnd Bergmann:
 "Since we didn't get around to collect fixes in time for -rc2 over the
  easter vacation, this one is unfortunately a bit larger than we'd like
  for an -rc3 merge.

  A large set of the changes is in the device tree sources, so I'm
  splitting out the description between code changes and DT changes.
  Aside from omap and versatile express, the actual code bugs are and
  trivial.  Here is an overview:

  imx:
   - fix video clock settings
   - fix one clock refcounting bug

  omap:
   - update defconfig for renamed USB PHY driver
   - fix error handling in gpmc
   - fix N900 video initialization regression
   - fix reression in hwmod code from missing braces
   - fix am43xx and omap3 clocks
   - remove bogus write to voltage control register

  pxa:
   - fix build regression from 3.13 header cleanup

  rockchip:
   - fix a misleading printk string

  shmobile:
   - fix incorrect sound setting on multiple machines

  spear:
   - remove incorrect __init section annotation

  tegra:
   - remove a stale Kconfig entry

  u300:
   - update defconfig

  ux500:
   - enable common wireless and sensor drivers in defconfig
   - more defconfig updates

  vexpress:
   - fix voltage calculation for opp
   - fix reboot hang and warning
   - fix out-of-bounds array access
   - improve error handling in clock driver

  overall:
   - always select CLKSRC_OF in multiplatform builds

  And these are the devicetree related changes:

  imx:
   - add missing #clock-cell properties
   - fix pinctrl setting in imx6sl-evk
   - fix video endpoint on imx53
   - remove obsolete lvds-channel nodes (multiple patches)
   - add missing second stmpe node
   - fix usb host mode on dmo-edmqmx6 (multiple patches)
   - fix gic node #address-cells to match usage
   - add missing legacy IRQ map for PCIe
   - fix microsom pincontrol setting for rgmii
   - fix fatal typo in touchscreen DT usage for mx5
   - list all RAM present on m53evk and mx53qsb

  omap:
   - fix bug in DT handling of gpmc external bus
   - add DT for older revision of beagleboard
   - fix regression after DT node name fixes
   - remove obsolete properties for gpmc
   - fix pinmux comment to match DT it refers to
   - fix newly added dra7xx clock node data
   - add missing clock for USB PHY

  mvebu:
   - add missing clock for mdio node
   - fix nonstandard vendor prefixes on i2c nodes

  rockchip:
   - fix pin control setting for uart

  shmobile:
   - fix typo in DT data for pin control (multiple patches)
   - fix gic node #address-cells to match usage

  tegra:
   - fix clock and uart DT representation to match hardware

  zynq:
   - add DT nodes for newly added driver
   - add DT properties required for cpufreq-ondemand

  overall:
   - restore alphabetic order in Makefile
   - grammar fixes in bindings"

* tag 'fixes-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits)
  ARM: vexpress/TC2: Convert OPP voltage to uV before storing
  power/reset: vexpress: Fix restart/power off operation
  dt: tegra: remove non-existent clock IDs
  clk: tegra: remove non-existent clocks
  ARM: tegra: remove UART5/UARTE from tegra124.dtsi
  ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE
  ARM: Tidy up DTB Makefile entries
  ARM: fix missing CLKSRC_OF on multi-platform
  ARM: spear: add __init to spear_clocksource_init()
  ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO
  arm/mach-vexpress: array accessed out of bounds
  clk: vexpress: NULL dereference on error path
  ARM: OMAP2+: Fix GPMC remap for devices using an offset
  ARM: zynq: dt: Add I2C nodes to Zynq device tree
  ARM: zynq: DT: Add 'clock-latency' property
  ARM: OMAP2+: Fix oops for GPMC free
  ARM: dts: Add support for the BeagleBoard xM A/B
  ARM: dts: Grammar /that will/it will/
  ARM: dts: Grammar /is uses/ is used/
  ARM: OMAP2+: Fix config name for USB3 PHY
  ...

Pull file locking fixes from Jeff Layton:
 "File locking related bugfixes for v3.15 (pile #2)

   - fix for a long-standing bug in __break_lease that can cause soft
     lockups
   - renaming of file-private locks to "open file description" locks,
     and the command macros to more visually distinct names

  The fix for __break_lease is also in the pile of patches for which
  Bruce sent a pull request, but I assume that your merge procedure will
  handle that correctly.

  For the other patches, I don't like the fact that we need to rename
  this stuff at this late stage, but it should be settled now
  (hopefully)"

* tag 'locks-v3.15-2' of git://git.samba.org/jlayton/linux:
  locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" instead
  locks: rename file-private locks to "open file description locks"
  locks: allow __break_lease to sleep even when break_time is 0

Pull nfsd bugfixes from Bruce Fields:
 "Three small nfsd bugfixes (including one locks.c fix for a bug
  triggered only from nfsd).

  Jeff's patches are for long-existing problems that became easier to
  trigger since the addition of vfs delegation support"

* 'for-3.15' of git://linux-nfs.org/~bfields/linux:
  Revert "nfsd4: fix nfs4err_resource in 4.1 case"
  nfsd: set timeparms.to_maxval in setup_callback_client
  locks: allow __break_lease to sleep even when break_time is 0

commit 0b60f9ea (s390: use
device_remove_file_self() instead of device_schedule_callback())

caused random memory corruption on my s390 box. Turns out that the
last element of the ccwgroup structure is of dynamic size, so we
must move the newly introduced work structure _before_ the zero
length array.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Tejun Heo <tj@kernel.org>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While updating how mmap enabled kernfs files are handled by lockdep,
9b2db6e1 ("sysfs: bail early from kernfs_file_mmap() to avoid
spurious lockdep warning") inadvertently dropped error return check
from kernfs_file_mmap().  The intention was just dropping "if
(ops->mmap)" check as the control won't reach the point if the mmap
callback isn't implemented, but I mistakenly removed the error return
check together with it.

This led to Xorg crash on i810 which was reported and bisected to the
commit and then to the specific change by Tobias.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Tobias Powalowski <tobias.powalowski@googlemail.com>
Tested-by: Tobias Powalowski <tobias.powalowski@googlemail.com>
References: http://lkml.kernel.org/g/533D01BD.1010200@googlemail.com
Cc: stable <stable@vger.kernel.org> # 3.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently kernfs_link_sibling() increates parent->dir.subdirs before
adding the node into parent's chidren rb tree.

Because it is possible that kernfs_link_sibling() couldn't find
a suitable slot and bail out, this leads to a mismatch between
elevated subdir count with actual children node numbers.

This patches fix this problem, by moving the subdir accouting
after the actual addtion happening.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>