- 03 May, 2013 1 commit
-
-
Gerlando Falauto authored
Signed-off-by:
Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 May, 2013 21 commits
-
-
Mugunthan V N authored
In CPSW NAPI, after processing all interrupts IRQ is enabled and then book keeping irq_enabled is updated. In random cases when a packet is transmitted or received between processing packets and IRQ enabled, then just after enabled IRQ and before irq_enabled is updated, ISR is called so IRQs are not disabled as irq_enabled is still false and CPU gets locked in CPSW ISR. By changing the sequence as update the irq_enabled and then enable IRQ fixes the issue. This issue is not captured always as it is a timing issue whether Tx or Rx IRQ is invoked between packet processing and enable IRQ. Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Wei Liu authored
This patch only changes some names to avoid confusion. In this patch we have: MAX_SKB_SLOTS_DEFAULT -> FATAL_SKB_SLOTS_DEFAULT max_skb_slots -> fatal_skb_slots #define XEN_NETBK_LEGACY_SLOTS_MAX XEN_NETIF_NR_SLOTS_MIN The fatal_skb_slots is the threshold to determine whether a packet is malicious. XEN_NETBK_LEGACY_SLOTS_MAX is the maximum slots a valid packet can have at this point. It is defined to be XEN_NETIF_NR_SLOTS_MIN because that's guaranteed to be supported by all backends. Suggested-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Wei Liu authored
Tune xen_netbk_count_requests to not touch working array beyond limit, so that we can make working array size constant. Suggested-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Wei Liu authored
Tracking down from the caller, first_idx is always equal to vif->tx.req_cons. Remove it to avoid confusion. Suggested-by:
-
Somnath Kotur authored
As per SPEC, INTx mode is not supported on VFs. So if enable_msix fails, then just fail probe. Also bail out of be_open if irq_register fails. Signed-off-by:
Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by:
-
Somnath Kotur authored
When RQ creation fails in be_open(), driver jumps to be_close() where napi_disable() is done without a prior napi_enable(); leading to a hang. This change is needed as there is no way to see if napi is enable/disabled. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
-
Somnath Kotur authored
Increasing the timeout value of write_object command to 60 seconds as 30 second timeout was found to be not enough for the command to complete. Signed-off-by:
-
Ajit Khaparde authored
When a user requests Promiscuous mode on SkyHawk-R devices, the FW enables Desparate Promiscuous mode. Due to this, we need to explicitly enable Multicast Promiscuous mode so that Multicast packets are received as well. This patch fixes that. Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Ajit Khaparde authored
The tx priority pause count is available with the driver. But we were not showing it. This change should fix it and display it in ethtool stats. Signed-off-by:
-
Ajit Khaparde authored
Only BE devices provide 16-bit counter for rx_drops_no_fragment. All other devices provide a 32-bit counter for this stat. Use the 32-bit value where available. Signed-off-by:
-
Ajit Khaparde authored
SkyHawk-R devices should use v2 of cq_create command. BE3/BE2 devices can use version 0 of the command to create a CQ. Signed-off-by:
-
Bjørn Mork authored
Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC non-critical fixes from Olof Johansson: "Here is a collection of fixes (and some intermixed cleanups) that were considered less important and thus not included in the later parts of the 3.9-rc cycle. It's a bit all over the map, contents wise. A series of ux500 fixes and cleanups, a bunch of various fixes for OMAP and tegra, and some for Freescale i.MX and even Qualcomm MSM. Note that there's also a patch on this branch to globally turn off -Wmaybe-uninitialized when building with -Os. It's been posted several times by Arnd and no dissent was raised, but nobody seemed interested to pick it up. So here it is, as the topmost patch." * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) Turn off -Wmaybe-uninitialized when building with -Os ARM: orion5x: include linux/cpu.h ARM: tegra: call cpu_do_idle from C code ARM: u300: fix ages old copy/paste bug ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7 ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled ARM: tegra: fix build error when THUMB2_KERNEL enabled ARM: msm: Fix uncompess.h tx underrun check ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: mach-imx: mach-imx6q: Fix sparse warnings ARM: mach-imx: src: Include "common.h ARM: mach-imx: gpc: Include "common.h" ARM: mach-imx: avic: Staticize *avic_base ARM: mach-imx: tzic: Staticize *tzic_base ARM: mach-imx: clk: Include "clk.h" ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops ...
-
Al Viro authored
Commit 32fcfd40 ("make vfree() safe to call from interrupt contexts") made it safe to do vfree directly from the RCU callback, which allows us to simplify ipc/util.c a lot by getting rid of the differences between vmalloc/kmalloc memory. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Miller authored
Commit 8ad227ff ("net: vlan: add 802.1ad support") added some new NETIF_F_* features bits, but it added them in the middle of existing values. Userland depends upon the flag bits via the per-netdevice 'flags' sysfs file. So restore the previous ordering by adding the new flags at the end. Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
-
- 01 May, 2013 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/efi changes from Peter Anvin: "The bulk of these changes are cleaning up the efivars handling and breaking it up into a tree of files. There are a number of fixes as well. The entire changeset is pretty big, but most of it is code movement. Several of these commits are quite new; the history got very messed up due to a mismerge with the urgent changes for rc8 which completely broke IA64, and so Ingo requested that we rebase it to straighten it out." * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: remove "kfree(NULL)" efi: locking fix in efivar_entry_set_safe() efi, pstore: Read data from variable store before memcpy() efi, pstore: Remove entry from list when erasing efi, pstore: Initialise 'entry' before iterating efi: split efisubsystem from efivars efivarfs: Move to fs/efivarfs efivars: Move pstore code into the new EFI directory efivars: efivar_entry API efivars: Keep a private global pointer to efivars efi: move utf16 string functions to efi.h x86, efi: Make efi_memblock_x86_reserve_range more readable efivarfs: convert to use simple_open()
-
James Hogan authored
Al's commit e1b5bb6d ("consolidate cond_syscall and SYSCALL_ALIAS declarations") broke the build on blackfin and metag due to the following code: #ifndef SYMBOL_NAME #ifdef CONFIG_SYMBOL_PREFIX #define SYMBOL_NAME(x) CONFIG_SYMBOL_PREFIX ## x #else #define SYMBOL_NAME(x) x #endif #endif #define __SYMBOL_NAME(x) __stringify(SYMBOL_NAME(x)) __stringify literally stringifies CONFIG_SYMBOL_PREFIX ##x, so you get lines like this in kernel/sys_ni.s: .weak CONFIG_SYMBOL_PREFIXsys_quotactl .set CONFIG_SYMBOL_PREFIXsys_quotactl,CONFIG_SYMBOL_PREFIXsys_ni_syscall The patches in Rusty's modules-next tree such as "CONFIG_SYMBOL_PREFIX: cleanup." cleans up the whole mess around symbol prefixes, so this patch just attempts to fix the build in the meantime. The intermediate definition of SYMBOL_NAME above isn't used and is incorrect when CONFIG_SYMBOL_PREFIX is defined as CONFIG_SYMBOL_PREFIX is a quoted string literal, so define __SYMBOL_NAME directly depending on CONFIG_SYMBOL_PREFIX. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Mea-culpa-by:
-
Al Viro authored
Signed-off-by: -
Al Viro authored
-
David Howells authored
Move non-public declarations and definitions from linux/proc_fs.h to fs/proc/internal.h. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Make the PROC_I() and PDE() macros internal to procfs. This means making PDE_DATA() out of line. This could be made more optimal by storing PDE()->data into inode->i_private. Also provide a __PDE_DATA() that is inline and internal to procfs. Signed-off-by:
-
David Howells authored
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by:
Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by:
-
Al Viro authored
Signed-off-by: -
David Howells authored
Clean up the pseries scanlog driver's use of procfs: (1) Don't need to save the proc_dir_entry pointer as we have the filename to remove with. (2) Save the scan log buffer pointer in a static variable (there is only one of it) and don't save it in the PDE (which doesn't have a destructor). Signed-off-by: -
David Howells authored
Clean up some of the problems with the rtas_flash driver: (1) It shouldn't fiddle with the internals of the procfs filesystem (altering pde->count). (2) If pid namespaces are in effect, then you can get multiple inodes connected to a single pde, thereby rendering the pde->count > 2 test useless. (3) The pde->count fudging doesn't work for forked, dup'd or cloned file descriptors, so add static mutexes and use them to wrap access to the driver through read, write and release methods. (4) The driver can only handle one device, so allocate most of the data previously attached to the pde->data as static variables instead (though allocate the validation data buffer with kmalloc). (5) We don't need to save the pde pointers as long as we have the filenames available for removal. (6) Don't try to multiplex what the update file read method does based on the filename. Instead provide separate file ops and split the function. Whilst we're at it, tabulate the procfile information and loop through it when creating or destroying them rather than manually coding each one. [Folded fixes from Vasant Hegde <hegdevasant@linux.vnet.ibm.com>] Signed-off-by: -
David Howells authored
Use remove_proc_subtree() rather than remove_proc_entry() to remove a device-specific proc directory and all its children. Signed-off-by:
-
David Howells authored
Use remove_proc_subtree() rather than remove_proc_entry() to remove a minor-specific drm proc directory and all its children. Things could theoretically be improved by storing the drm_minor pointer in the minor-specific dir proc_dir_entry struct data and then scrapping the list of proc files - but that's shared with the debugfs interface where you can't do that, so I don't see an easy way of doing it. Signed-off-by:
-
David Howells authored
Use minor->index to label things, not the name field from the proc_dir_entry of the /proc/dwm/<minor>/ directory. Also, use "%u" not "%d" to render the value and use a 12-byte buffer in which to render the integer, not a 16-byte buffer. The longest string an unsigned int can give you is 10 chars (4294967295) plus a NUL, so round up to 12 as the stack is likely to be 4- or 8-byte aligned. Signed-off-by:
-
David Howells authored
Constify drm_proc_list[] and related pointers. Signed-off-by:
-
David Howells authored
Don't print proc_dir_entry data in debug as we're soon to have no direct access to the contents of the PDE. Print what was put in there instead. Signed-off-by:
-
David Howells authored
Don't access the proc_dir_entry in ReiserFS's r_open(), r_start() r_show() procfs interface functions. ReiserFS stores the ->show() method pointer in PDE->data and the super_block pointer in PDE->parent->data. This isn't changing. Currently, ReiserFS passes the PDE pointer into seq_file::private from r_open() so that r_start() and r_show() can then access it. Instead, use seq_open_private() to allocate a two-pointer struct that's passed through seq_file::private and put the ->show() method and the sb pointers in there. Signed-off-by:
-
David Howells authored
Supply an accessor function for getting the private data from the parent proc_dir_entry struct of the proc_dir_entry struct associated with an inode. ReiserFS, for instance, stores the super_block pointer in the proc directory it makes for that super_block, and a pointer to the respective seq_file show function in each of the proc files in that directory. This allows a reduction in the number of file_operations structs, open functions and seq_operations structs required. The problem otherwise is that each show function requires two pieces of data but only has storage for one per PDE (and this has no release function). Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Jerry Chuang <jerry-chuang@realtek.com> cc: Maxim Mikityanskiy <maxtram95@gmail.com> cc: YAMANE Toshiaki <yamanetoshi@gmail.com> cc: linux-wireless@vger.kernel.org cc: linux-scsi@vger.kernel.org cc: devel@driverdev.osuosl.org Signed-off-by:
-
David Howells authored
Use remove_proc_subtree() to remove the airo device subdir and all its children instead of doing it manually. Signed-off-by:
-
