- 15 Sep, 2015 19 commits
-
-
Iyappan Subramanian authored
Adding the second 10GbE dt node for APM X-Gene SoC device tree Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
Adding support for the second 10GbE port on APM X-Gene SoC Signed-off-by:
-
Oliver Neukum authored
This moves cdc-phonet to the common parser for CDC users to reduce code duplication. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
This moves qmi-wwan to the common parser for CDC user to reduce code duplication. Signed-off-by:
-
Oliver Neukum authored
This patch uses the common parser to parse extra CDC headers in order to reduce code duplication. Signed-off-by:
-
Oliver Neukum authored
This moves cdc-ncm to the common parser for CDC user to reduce code duplication. Signed-off-by:
-
Oliver Neukum authored
CDC drivers all implement their own parser for the extra headers. This patch fixes the code duplication introducing a single common parser in usbnet. Signed-off-by:
-
Mugunthan V N authored
In DRA72x EVM, by default slave 1 is connected to the onboard phy, but slave 2 pins are also muxed with video input module which is controlled by pcf857x gpio and currently to select slave 0 to connect to phy gpio hogging is used, but with omap2plus_defconfig the pcf857x gpio is built as module. So when using NFS on DRA72x EVM, board doesn't boot as gpio hogging do not set proper gpio state to connect slave 0 to phy as it is built as module and you do not see any errors for not setting gpio and just mentions dhcp reply not got. To solve this issue, introducing "mode-gpios" in DT when gpio based muxing is required. This will throw a warning when gpio get fails and returns probe defer. When gpio-pcf857x module is installed, cpsw probes again and ethernet becomes functional. Verified this on DRA72x with pcf as module and ramdisk. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: improve ATU move operations This patchset completes the set of available Address Translation Unit operations. These Marvell switches have 4 operations to flush or (re)move, all or only non-static MAC addresses, from the entire set of databases or from just a particular one. The first 3 patches introduce a generic _mv88e6xxx_atu_flush_move function. The 4 remaining patches update a few FID operations in the driver on setup, when a port join or leave a VLAN, or change state. This is a step forward improving the hardware bridging support in DSA and 88E6352-compatible switches. ==================== Signed-off-by: -
Vivien Didelot authored
When we're moving a port from Learning or Forwarding state to Disabled or Blocking or Listening state, remove all non-static MAC addresses mapped to this port in the entire set of databases, not only one. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Add a new _mv88e6xxx_atu_move function to prepare the ATU data register for the move operation. The ports vector will contain the source port and destination port of the Move operation. If the destination port is 0xF, the MAC addresses mapped to the source port are removed for the address database(s). Then add a _mv88e6xxx_atu_remove wrapper to remove the MAC addresses from a VLAN database that are mapped to a given port, when it leaves it. Signed-off-by:
-
Vivien Didelot authored
When choosing an address database for a new VLAN, flush every entries, not only the non-static ones. Signed-off-by:
-
Vivien Didelot authored
Purge all MAC addresses from the entire set of address databases when the driver initializes the device. Signed-off-by:
-
Vivien Didelot authored
These Marvell switches have 4 operations to flush or (re)move, all or only non-static MAC addresses, from the entire set of databases or from just a particular one. The value of the EntryState bits will determine if the operation is either a Flush (0x0) or a Move (0xF). When moving entries from one port to another, entries will be removed if the destination port is 0xF. This patch renames these operations for consistency, add a new generic _mv88e6xxx_atu_flush_move function, and change _mv88e6xxx_flush_fid to use it. Signed-off-by:
-
Vivien Didelot authored
Other ATU commands need to write the ATU data register. To ease the introduction of such commands, extract the ATU data write access from _mv88e6xxx_atu_load to its own function. Signed-off-by:
-
Vivien Didelot authored
Not every ATU commands apply to an FID, thus remove the FID writing from mv88e6xxx_atu_cmd and write it explicitly where needed, in order to ease introduction of such commands. Signed-off-by:
-
David Ahern authored
rt_fill_info which is called for 'route get' requests hardcodes the table id as RT_TABLE_MAIN which is not correct when multiple tables are used. Use the newly added table id in the rtable to send back the correct table similar to what is done for IPv6. To maintain current ABI a new request flag, RTM_F_LOOKUP_TABLE, is added to indicate the actual table is wanted versus the hardcoded response. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
Add the FIB table id to rtable to make the information available for IPv4 as it is for IPv6. Signed-off-by:
-
David Ahern authored
All callers to rt_dst_alloc have nearly the same initialization following a successful allocation. Consolidate it into rt_dst_alloc. Signed-off-by:
-
- 11 Sep, 2015 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes since the last update: the HD-audio quirks as usual with a USB-audio fix and a trivial fix for the old sparc driver" * tag 'sound-fix-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Change internal PCM order ALSA: hda - Fix white noise on Dell M3800 ALSA: hda - Use ALC880_FIXUP_FUJITSU for FSC Amilo M1437 ALSA: hda - Enable headphone jack detect on old Fujitsu laptops ALSA: sparc: amd7930: Fix module autoload for OF platform driver ALSA: hda - Add some FIXUP quirks for white noise on Dell laptop.
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Just a bunch of fixes to squeeze in before -rc1: - three nouveau regression fixes - one qxl regression fix - a bunch of i915 fixes ... and some core displayport/atomic fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/device: enable c800 quirk for tecra w50 drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x drm/nouveau/gr/nv04: fix big endian setting on gr context drm/qxl: validate monitors config modes drm/i915: Allow DSI dual link to be configured on any pipe drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS drm/i915: Fix CSR MMIO address check drm/i915: Limit the number of loops for reading a split 64bit register drm/i915: Fix broken mst get_hw_state. drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x uapi/drm/i915_drm.h: fix userspace compilation. drm/i915: Always mark the object as dirty when used by the GPU drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed drm/dp: Define AUX_RETRY_INTERVAL as 500 us drm/atomic: Fix bookkeeping with TEST_ONLY, v3.
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
three nouveau regression fixes. * 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/device: enable c800 quirk for tecra w50 drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x drm/nouveau/gr/nv04: fix big endian setting on gr context
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull blk-cg updates from Jens Axboe: "A bit later in the cycle, but this has been in the block tree for a a while. This is basically four patchsets from Tejun, that improve our buffered cgroup writeback. It was dependent on the other cgroup changes, but they went in earlier in this cycle. Series 1 is set of 5 patches that has cgroup writeback updates: - bdi_writeback iteration fix which could lead to some wb's being skipped or repeated during e.g. sync under memory pressure. - Simplification of wb work wait mechanism. - Writeback tracepoints updated to report cgroup. Series 2 is is a set of updates for the CFQ cgroup writeback handling: cfq has always charged all async IOs to the root cgroup. It didn't have much choice as writeback didn't know about cgroups and there was no way to tell who to blame for a given writeback IO. writeback finally grew support for cgroups and now tags each writeback IO with the appropriate cgroup to charge it against. This patchset updates cfq so that it follows the blkcg each bio is tagged with. Async cfq_queues are now shared across cfq_group, which is per-cgroup, instead of per-request_queue cfq_data. This makes all IOs follow the weight based IO resource distribution implemented by cfq. - Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff. - Other misc review points addressed, acks added and rebased. Series 3 is the blkcg policy cleanup patches: This patchset contains assorted cleanups for blkcg_policy methods and blk[c]g_policy_data handling. - alloc/free added for blkg_policy_data. exit dropped. - alloc/free added for blkcg_policy_data. - blk-throttle's async percpu allocation is replaced with direct allocation. - all methods now take blk[c]g_policy_data instead of blkcg_gq or blkcg. And finally, series 4 is a set of patches cleaning up the blkcg stats handling: blkcg's stats have always been somwhat of a mess. This patchset tries to improve the situation a bit. - The following patches added to consolidate blkcg entry point and blkg creation. This is in itself is an improvement and helps colllecting common stats on bio issue. - per-blkg stats now accounted on bio issue rather than request completion so that bio based and request based drivers can behave the same way. The issue was spotted by Vivek. - cfq-iosched implements custom recursive stats and blk-throttle implements custom per-cpu stats. This patchset make blkcg core support both by default. - cfq-iosched and blk-throttle keep track of the same stats multiple times. Unify them" * 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits) blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/ blkcg: implement interface for the unified hierarchy blkcg: misc preparations for unified hierarchy interface blkcg: separate out tg_conf_updated() from tg_set_conf() blkcg: move body parsing from blkg_conf_prep() to its callers blkcg: mark existing cftypes as legacy blkcg: rename subsystem name from blkio to io blkcg: refine error codes returned during blkcg configuration blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device() blkcg: reduce stack usage of blkg_rwstat_recursive_sum() blkcg: remove cfqg_stats->sectors blkcg: move io_service_bytes and io_serviced stats into blkcg_gq blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq blkcg: make blkcg_[rw]stat per-cpu blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it blkcg: consolidate blkg creation in blkcg_bio_issue_check() blk-throttle: improve queue bypass handling blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup() blkcg: inline [__]blkg_lookup() ... -
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Roy Spliet authored
Typo that snuck in with commit 6979c630Signed-off-by:
Roy Spliet <rspliet@eclipso.eu> Reported-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
-
Ilia Mirkin authored
Broken since "gr: convert user classes to new-style nvkm_object" Tested on a PPC64 G5 + NV34 Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Linus Torvalds authored
Merge third patch-bomb from Andrew Morton: - even more of the rest of MM - lib/ updates - checkpatch updates - small changes to a few scruffy filesystems - kmod fixes/cleanups - kexec updates - a dma-mapping cleanup series from hch * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits) dma-mapping: consolidate dma_set_mask dma-mapping: consolidate dma_supported dma-mapping: cosolidate dma_mapping_error dma-mapping: consolidate dma_{alloc,free}_noncoherent dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent} mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd() mm: make sure all file VMAs have ->vm_ops set mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff() mm: mark most vm_operations_struct const namei: fix warning while make xmldocs caused by namei.c ipc: convert invalid scenarios to use WARN_ON zlib_deflate/deftree: remove bi_reverse() lib/decompress_unlzma: Do a NULL check for pointer lib/decompressors: use real out buf size for gunzip with kernel fs/affs: make root lookup from blkdev logical size sysctl: fix int -> unsigned long assignments in INT_MIN case kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo kexec: align crash_notes allocation to make it be inside one physical page kexec: remove unnecessary test in kimage_alloc_crash_control_pages() kexec: split kexec_load syscall from kexec core code ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull late ARM SoC updates from Kevin Hilman: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The bulk of the changes are for samsung/exynos SoCs for some changes that needed a few minor reworks so ended up a bit late. The others are mainly for qcom SoCs: a couple fixes and some DTS updates" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: multi_v7_defconfig: Enable PBIAS regulator soc: qcom: smd: Correct fBLOCKREADINTR handling soc: qcom: smd: Use correct remote processor ID soc: qcom: smem: Fix errant private access ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path ARM: dts: qcom: msm8960-cdp: Use stdout-path ARM: dts: qcom: msm8660-surf: Use stdout-path ARM: dts: qcom: ipq8064-ap148: Use stdout-path ARM: dts: qcom: apq8084-mtp: Use stdout-path ARM: dts: qcom: apq8084-ifc6540: Use stdout-path ARM: dts: qcom: apq8074-dragonboard: Use stdout-path ARM: dts: qcom: apq8064-ifc6410: Use stdout-path ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path ARM: dts: qcom: Label serial nodes for aliasing and stdout-path reset: ath79: Fix missing spin_lock_init reset: Add (devm_)reset_control_get stub functions ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12 cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o ARM: dts: add iommu property to JPEG device for exynos4 ARM: dts: enable SPI1 for exynos4412-odroidu3 ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
bunch of drm fixes. * tag 'topic/drm-fixes-2015-09-09' of git://anongit.freedesktop.org/drm-intel: drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed drm/dp: Define AUX_RETRY_INTERVAL as 500 us drm/atomic: Fix bookkeeping with TEST_ONLY, v3.
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel into drm-next Fixes headed for v4.3-rc1, including Maarten's DP MST state checker fix you requested. * tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel: drm/i915: Allow DSI dual link to be configured on any pipe drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS drm/i915: Fix CSR MMIO address check drm/i915: Limit the number of loops for reading a split 64bit register drm/i915: Fix broken mst get_hw_state. drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x uapi/drm/i915_drm.h: fix userspace compilation. drm/i915: Always mark the object as dirty when used by the GPU
-
Jonathon Jongsma authored
Due to some recent changes in drm_helper_probe_single_connector_modes_merge_bits(), old custom modes were not being pruned properly. In current kernels, drm_mode_validate_basic() is called to sanity-check each mode in the list. If the sanity-check passes, the mode's status gets set to to MODE_OK. In older kernels this check was not done, so old custom modes would still have a status of MODE_UNVERIFIED at this point, and would therefore be pruned later in the function. As a result of this new behavior, the list of modes for a device always includes every custom mode ever configured for the device, with the largest one listed first. Since desktop environments usually choose the first preferred mode when a hotplug event is emitted, this had the result of making it very difficult for the user to reduce the size of the display. The qxl driver did implement the mode_valid connector function, but it was empty. In order to restore the old behavior where old custom modes are pruned, we implement a proper mode_valid function for the qxl driver. This function now checks each mode against the last configured custom mode and the list of standard modes. If the mode doesn't match any of these, its status is set to MODE_BAD so that it will be pruned as expected. Signed-off-by:
Jonathon Jongsma <jjongsma@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 10 Sep, 2015 9 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm updates from Paolo Bonzini: "ARM: - Full debug support for arm64 - Active state switching for timer interrupts - Lazy FP/SIMD save/restore for arm64 - Generic ARMv8 target PPC: - Book3S: A few bug fixes - Book3S: Allow micro-threading on POWER8 x86: - Compiler warnings Generic: - Adaptive polling for guest halt" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits) kvm: irqchip: fix memory leak kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PF KVM: trace kvm_halt_poll_ns grow/shrink KVM: dynamic halt-polling KVM: make halt_poll_ns per-vCPU Silence compiler warning in arch/x86/kvm/emulate.c kvm: compile process_smi_save_seg_64() only for x86_64 KVM: x86: avoid uninitialized variable warning KVM: PPC: Book3S: Fix typo in top comment about locking KVM: PPC: Book3S: Fix size of the PSPB register KVM: PPC: Book3S HV: Exit on H_DOORBELL if HOST_IPI is set KVM: PPC: Book3S HV: Fix race in starting secondary threads KVM: PPC: Book3S: correct width in XER handling KVM: PPC: Book3S HV: Fix preempted vcore stolen time calculation KVM: PPC: Book3S HV: Fix preempted vcore list locking KVM: PPC: Book3S HV: Implement H_CLEAR_REF and H_CLEAR_MOD KVM: PPC: Book3S HV: Fix bug in dirty page tracking KVM: PPC: Book3S HV: Fix race in reading change bit when removing HPTE KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8 KVM: PPC: Book3S HV: Make use of unused threads when running guests ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze update from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: elf-em.h: move EM_MICROBLAZE to the common header
-
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernelLinus Torvalds authored
Pull hexagon updates from Richard Kuo: "Just two fixes -- one for a uapi header and one for a timer interface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: Revert "Hexagon: fix signal.c compile error" hexagon/time: Migrate to new 'set-state' interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix out-of-bounds array access in netfilter ipset, from Jozsef Kadlecsik. 2) Use correct free operation on netfilter conntrack templates, from Daniel Borkmann. 3) Fix route leak in SCTP, from Marcelo Ricardo Leitner. 4) Fix sizeof(pointer) in mac80211, from Thierry Reding. 5) Fix cache pointer comparison in ip6mr leading to missed unlock of mrt_lock. From Richard Laing. 6) rds_conn_lookup() needs to consider network namespace in key comparison, from Sowmini Varadhan. 7) Fix deadlock in TIPC code wrt broadcast link wakeups, from Kolmakov Dmitriy. 8) Fix fd leaks in bpf syscall, from Daniel Borkmann. 9) Fix error recovery when installing ipv6 multipath routes, we would delete the old route before we would know if we could fully commit to the new set of nexthops. Fix from Roopa Prabhu. 10) Fix run-time suspend problems in r8152, from Hayes Wang. 11) In fec, don't program the MAC address into the chip when the clocks are gated off. From Fugang Duan. 12) Fix poll behavior for netlink sockets when using rx ring mmap, from Daniel Borkmann. 13) Don't allocate memory with GFP_KERNEL from get_stats64 in r8169 driver, from Corinna Vinschen. 14) In TCP Cubic congestion control, handle idle periods better where we are application limited, in order to keep cwnd from growing out of control. From Eric Dumzet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) tcp_cubic: better follow cubic curve after idle period tcp: generate CA_EVENT_TX_START on data frames xen-netfront: respect user provided max_queues xen-netback: respect user provided max_queues r8169: Fix sleeping function called during get_stats64, v2 ether: add IEEE 1722 ethertype - TSN netlink, mmap: fix edge-case leakages in nf queue zero-copy netlink, mmap: don't walk rx ring on poll if receive queue non-empty cxgb4: changes for new firmware 1.14.4.0 net: fec: add netif status check before set mac address r8152: fix the runtime suspend issues r8152: split DRIVER_VERSION ipv6: fix ifnullfree.cocci warnings add microchip LAN88xx phy driver stmmac: fix check for phydev being open net: qlcnic: delete redundant memsets net: mv643xx_eth: use kzalloc net: jme: use kzalloc() instead of kmalloc+memset net: cavium: liquidio: use kzalloc in setup_glist() net: ipv6: use common fib_default_rule_pref ... -
Christoph Hellwig authored
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by:
-
Christoph Hellwig authored
Currently there are three valid implementations of dma_mapping_error: (1) call ->mapping_error (2) check for a hardcoded error code (3) always return 0 This patch provides a common implementation that calls ->mapping_error if present, then checks for DMA_ERROR_CODE if defined or otherwise returns 0. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by:
-
Christoph Hellwig authored
Most architectures do not support non-coherent allocations and either define dma_{alloc,free}_noncoherent to their coherent versions or stub them out. Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips implements them directly. This patch moves the Openrisc version to common code, and handles the DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance. Note that actual non-coherent allocations require a dma_cache_sync implementation, so if non-coherent allocations didn't work on an architecture before this patch they still won't work after it. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by:
-
