- 12 Mar, 2018 22 commits
-
-
Tonghao Zhang authored
ixgbe enabled rlec counter and the rx_error used it. We can export the counter directly via ethtool -S ethX. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
With commit 7f05b467 ("xfrm: check for xdo_dev_state_free") we no longer need to add an empty callback function to the driver, so now let's remove the useless code. Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
-
Shannon Nelson authored
Fix up the Tx trailer length calculation. We can't believe the trailer len from the xstate information because it was calculated before the packet was put together and padding added. This bit of code finds the padding value in the trailer, adds it to the authentication length, and saves it so later we can put it into the Tx descriptor to tell the device where to stop the checksum calculation. Fixes: 59259470 ("ixgbe: process the Tx ipsec offload") Signed-off-by:
-
Shannon Nelson authored
Make sure the Security Association is using a 128-bit authentication, since that's the only size that the hardware offload supports. Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== fix some bugs for HNS3 driver This patchset fixes some bugs for HNS3 driver: [Patch 1/12 - Patch 8/12] fix various bugs for PF driver. [Patch 9/12 - Patch 12/12] fix issues when change the us mac address of PF/VF device to an existent one in the mac_vlan table. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jian Shen authored
VF changes unicast mac address by sending mailbox msg to PF, then PF completes the mac address modification. It may fail when the target uc mac address is already in the mac_vlan table. VF should be aware of it by reading the message result. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Jian Shen authored
It's not allowed to add two same unicast mac address entries to the mac_vlan table. When modify the uc mac address of a VF device to the same value with the PF device's, the PF device will lose its entry of the mac_vlan table. Lookup the mac address in the mac_vlan table, and add it if the entry is inexistent. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Jian Shen authored
Error code -EIO was used to indicate mutilple errors in function hclge_get_mac_vlan_cmd_status().This patch fixes it by using error code depending on the error type. For no space error, return -ENOSPC. For entry not found, return -ENOENT. For command send fail, return -EIO. For invalid op code, return -EINVAL. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Jian Shen authored
An enum type variable was used to store an "int" type return value. This patch fixes it. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
This patch fixes the buffer overflow warning by refactoring hclgevf_bind_ring_to_vector and hclge_get_ring_chain_from_mbx. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
When vlan ctag filter is enabled, the loopback selftest fails because loopback selftest does not support vlan. This patch fixes it by disabling the vlan ctag filter when runnig loopback selftest. Signed-off-by:
-
Peng Li authored
This patch add support for querying pfc puase packets statistic in hclge_ieee_getpfc, which is used to tell user how many pfc puase packets have been sent and received by this mac port. Signed-off-by:
-
Peng Li authored
Original skb->truesize reports the received packet size, not the actual buffer size NIC driver allocated(1 Page). The linux net protocol will misjudge the true size of rx queue. Signed-off-by:
-
Fuyun Liang authored
Since the firmware cmd to setup mac pause params is the same as the firmware cmd to pfc pause params, this patch unifies the pause params setup function. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
-
Fuyun Liang authored
The function of dev_close and dev_open is just likes ifconfig <netif> down and ifconfig <netif> up. The ipv6 address will be lost after dev_close and dev_open are called. This patch uses hns3_nic_net_stop to replace dev_close and uses hns3_nic_net_open to replace dev_open. Signed-off-by:
-
Fuyun Liang authored
The link status update function is called by timer every second. But net_stop and net_open may be called with very short intervals. The link status update function can not detect the link state has changed. It causes the netdev not running problem. This patch fixes it by updating the link state in ae_stop function. Signed-off-by:
-
Fuyun Liang authored
When driver is in initial state, the mac_vlan table table is empty. So the delete operation for mac address must fail. Existence check is needed here. Otherwise, the error message will make user confused. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== selftests: forwarding: Tweaks and a new test First patch adds a new test for VLAN-unaware bridges. Next two patches make the tests fail in case they are missing interfaces or dependencies. Last patch allows one to create the veth interfaces even without the optional configuration file. ==================== Signed-off-by: -
Ido Schimmel authored
Some users want to be able to run the tests without a configuration file which is useful when one needs to test both virtual and physical interfaces on the same machine. Move the defines that set the type of interface to create and whether to create it away from the optional configuration file to the library like the rest of the defines. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Ido Schimmel authored
Returning 0 gives a false sense of success when the required modules did not even manage to be initialized and register the required net devices. Signed-off-by:
-
Ido Schimmel authored
We already return an error when some dependencies (e.g., 'jq') are missing so lets be consistent and do that for all. Signed-off-by:
-
Ido Schimmel authored
Similar to the VLAN-aware bridge test, test the VLAN-unaware bridge and make sure that ping, FDB learning and flooding work as expected. Signed-off-by:
-
- 09 Mar, 2018 18 commits
-
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2018-03-09 here is the current pile of qeth patches for net-next. Just the usual small updates and clean ups. Please apply. ==================== Signed-off-by: -
Julian Wiedmann authored
Using up 8 bytes in every ipaddr object to store SETIP/DELIP flags is rather wasteful. Except for takeover eligibility, the flag values all just depend on the address type, so determine them on demand. While at it reorder the struct to fill an alignment hole. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Reduce code duplication. Signed-off-by:
-
Julian Wiedmann authored
On an IP event, current code tries to determine if the netdev belongs to a L3 card by walking all qeth cards in the system, and then all of their VLAN devices too. Short-cut the whole thing by identifying a L3 device through its netdev_ops. Signed-off-by:
-
Julian Wiedmann authored
Extract a helper that does the actual work & returns the right NOTIFY_* responses, and start putting the temporary ipaddr container objects on the stack rather than kmalloc'ing them. They are small, and this reduces the confusion of which objects actually get added to qeth's IP tables. Signed-off-by:
-
Julian Wiedmann authored
init_qdio_queues() resets the Input Queue's overall QDIO state, and positions the buffer cursor back to 0. So this is the obvious place to also reset the queue's NAPI context (in contrast to doing it rather randomly in the middle of the big set_online() path). No functional change. Signed-off-by:
-
Julian Wiedmann authored
Newly-allocated skbs default to PACKET_HOST, and eth_type_trans() is smart enough to determine any other packet type from the frame's destination address. So except for the IQD sniffer case, there is no need to set up skb->pkt_type manually. Signed-off-by:
-
Julian Wiedmann authored
napi_alloc_skb() doesn't need to disable IRQs during the allocation, and thus may save us a few cycles. Doing so requires a small fix-up in the HiperTransport path, which currently assumes a fixed NET_SKB_PAD headroom padding. napi_alloc_skb() adds an additional NET_IP_ALIGN padding, so use the proper helper for setting up the mac_header offset. Use this opportunity to convert the non-NAPI path to netdev_alloc_skb(), which means that skb->dev is now always set-up during allocation and doesn't need to be assigned manually. Signed-off-by:
-
Julian Wiedmann authored
We need to pass the *payload* length, not the L2 address length. For qeth (using eth_header()) this is merely a cosmetic change: the parameter only matters when building headers for ETH_P_802_2 or ETH_P_802_3, whereas our fake headers are built with ETH_P_IP / ETH_P_IPV6 / 0. Signed-off-by:
-
Julian Wiedmann authored
qeth implements HW-based Unicast Filtering (via SETVMAC) on L2 devices. Tell the stack, so it knows that receiving traffic for secondary addresses doesn't require full-blown promiscuous mode. Signed-off-by:
-
Julian Wiedmann authored
NETIF_F_SG support is currently limited to OSA (and for L2 even OSD) devices. Advertise it for some more device types (OSM, L2 OSX, z/VM OSA) that share the same code paths. For now, keep it switched off by default on these devices. Signed-off-by:
-
Julian Wiedmann authored
The 'portname' attribute is deprecated and setting it has no effect. Signed-off-by:
-
Julian Wiedmann authored
"s390/qeth: fix SETIP command handling" introduced a new helper, apply it driver-wide. Signed-off-by:
-
Paolo Abeni authored
Some network devices - notably ipvlan slave - are not compatible with any kind of rx_handler. Currently the hook can be installed but any configuration (bridge, bond, macsec, ...) is nonfunctional. This change allocates a priv_flag bit to mark such devices and explicitly forbid installing a rx_handler if such bit is set. The new bit is used by ipvlan slave device. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Ganesh Goudar authored
T6 cards can support up to 100 G speeds. So, increase max programmable tx rate limit to 100 Gbps. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wvla, remove VLA usage and replace it with a fixed-length array instead. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Vaibhav Murkute authored
Fixed a coding style issue. Signed-off-by:
Vaibhav Murkute <vaibhavmurkute88@gmail.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== fixes for configuration lost problems This patchset refactors some functions and some bugs in order to fix the configuration loss problem when resetting and setting channel number. ==================== Signed-off-by:
-
