- 01 Sep, 2017 1 commit
-
-
NeilBrown authored
bitmap_resize() does not work for file-backed bitmaps. The buffer_heads are allocated and initialized when the bitmap is read from the file, but resize doesn't read from the file, it loads from the internal bitmap. When it comes time to write the new bitmap, the bh is non-existent and we crash. The common case when growing an array involves making the array larger, and that normally means making the bitmap larger. Doing that inside the kernel is possible, but would need more code. It is probably easier to require people who use file-backed bitmaps to remove them and re-add after a reshape. So this patch disables the resizing of arrays which have file-backed bitmaps. This is better than crashing. Reported-by:
Zhilong Liu <zlliu@suse.com> Fixes: d60b479d ("md/bitmap: add bitmap_resize function to allow bitmap resizing.") Cc: stable@vger.kernel.org (v3.5+). Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
- 28 Aug, 2017 2 commits
-
-
Pawel Baldysiak authored
Search PPL buffer in order to find out the latest PPL header (the one with largest generation number) and use it for recovery. The PPL entry format and recovery algorithm are the same as for single PPL approach. Signed-off-by:
Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
Pawel Baldysiak authored
Increase PPL area to 1MB and use it as circular buffer to store PPL. The entry with highest generation number is the latest one. If PPL to be written is larger then space left in a buffer, rewind the buffer to the start (don't wrap it). Signed-off-by:
Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
- 25 Aug, 2017 7 commits
-
-
Shaohua Li authored
The discard bio doesn't attach the original bio cgroup info. Normal bio is cloned, so is fine. Signed-off-by:
Shaohua Li <shli@fb.com>
-
Denys Vlasenko authored
Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: mingo@redhat.com Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Megha Dey <megha.dey@linux.intel.com> Cc: Gayatri Kammela <gayatri.kammela@intel.com> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Shaohua Li <shli@fb.com>
-
Guoqing Jiang authored
Now raid5_build_block is just called to set the sector of r5dev, raid5_compute_blocknr can be used directly for the purpose. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
Song Liu authored
In r5c_journal_mode_show(), it is necessary to call mddev_lock() before accessing conf and conf->log. Otherwise, the conf->log may change (and become NULL). Signed-off-by:
Song Liu <songliubraving@fb.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
Cihangir Akturk authored
Since commit f1514638 ("fs: seq_file - add event counter to simplify poll() support"), md.c code has been no longer used the private field of the struct seq_file, but seq_release_private() has been continued to be used to release the allocated seq_file. This seems to have been forgotten. So convert it to use seq_release() instead of seq_release_private(). Signed-off-by:
Cihangir Akturk <cakturk@gmail.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
Alexey Obitotskiy authored
In case of external metadata arrays spare disks are added to containers first. mdadm keeps monitoring /proc/mdstat output and when spare disk is available, it moves it from the container to the array. The problem is there is no notification of new spare disk in the container and mdadm waits a long time (until timeout) before it takes the action. Signed-off-by:
Alexey Obitotskiy <aleksey.obitotskiy@intel.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
Shaohua Li authored
Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by:
Jonathan G. Underwood <jonathan.underwood@gmail.com> Fixes: f0250618(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c58(md: raid1: don't use bio's vec table to manage resync pages) Cc: stable@vger.kernel.org (4.12+) Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
- 24 Aug, 2017 3 commits
-
-
Song Liu authored
In raid5, there are scenarios where some ios are deferred to a later time, and some IO need a flush to complete. To make sure we make progress with these IOs, we need to call the following functions: flush_deferred_bios(conf); r5l_flush_stripe_to_raid(conf->log); Both of these functions are called in raid5d(), but missing in raid5_do_work(). As a result, these functions are not called when multi-threading (group_thread_cnt > 0) is enabled. This patch adds calls to these function to raid5_do_work(). Note for stable branches: r5l_flush_stripe_to_raid(conf->log) is need for 4.4+ flush_deferred_bios(conf) is only needed for 4.11+ Cc: stable@vger.kernel.org (4.4+) Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
Shaohua Li authored
raid5 cache could write bitmap superblock before bitmap superblock is initialized. The bitmap superblock is less than 512B. The current code will only copy the superblock to a new page and write the whole 512B, which will zero the the data after the superblock. Unfortunately the data could include bitmap, which we should preserve. The patch will make superblock read do 4k chunk and we always copy the 4k data to new page, so the superblock write will old data to disk and we don't change the bitmap. Reported-by:
Song Liu <songliubraving@fb.com> Reviewed-by:
Song Liu <songliubraving@fb.com> Cc: stable@vger.kernel.org (4.10+) Signed-off-by:
Shaohua Li <shli@fb.com>
-
Linus Torvalds authored
This reverts commit c8c03f18. It turns out that while fixing the ptmx file descriptor to have the correct 'struct path' to the associated slave pty is a really good thing, it breaks some user space tools for a very annoying reason. The problem is that /dev/ptmx and its associated slave pty (/dev/pts/X) are on different mounts. That was what caused us to have the wrong path in the first place (we would mix up the vfsmount of the 'ptmx' node, with the dentry of the pty slave node), but it also means that now while we use the right vfsmount, having the pty master open also keeps the pts mount busy. And it turn sout that that makes 'pbuilder' very unhappy, as noted by Stefan Lippers-Hollmann: "This patch introduces a regression for me when using pbuilder 0.228.7[2] (a helper to build Debian packages in a chroot and to create and update its chroots) when trying to umount /dev/ptmx (inside the chroot) on Debian/ unstable (full log and pbuilder configuration file[3] attached). [...] Setting up build-essential (12.3) ... Processing triggers for libc-bin (2.24-15) ... I: unmounting dev/ptmx filesystem W: Could not unmount dev/ptmx: umount: /var/cache/pbuilder/build/1340/dev/ptmx: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).)" apparently pbuilder tries to unmount the /dev/pts filesystem while still holding at least one master node open, which is arguably not very nice, but we don't break user space even when fixing other bugs. So this commit has to be reverted. I'll try to figure out a way to avoid caching the path to the slave pty in the master pty. The only thing that actually wants that slave pty path is the "TIOCGPTPEER" ioctl, and I think we could just recreate the path at that time. Reported-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Eric W Biederman <ebiederm@xmission.com> Cc: Christian Brauner <christian.brauner@canonical.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Aug, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Late arm64 fixes. They fix very early boot failures with KASLR where the early mapping of the kernel is incorrect, so the failure mode looks like a hang with no output. There's also a signal-handling fix when a uaccess routine faults with a fatal signal pending, which could be used to create unkillable user tasks using userfaultfd and finally a state leak fix for the floating pointer registers across a call to exec(). We're still seeing some random issues crop up (inode memory corruption and spinlock recursion) but we've not managed to reproduce things reliably enough to debug or bisect them yet. Summary: - Fix very early boot failures with KASLR enabled - Fix fatal signal handling on userspace access from kernel - Fix leakage of floating point register state across exec()" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kaslr: Adjust the offset to avoid Image across alignment boundary arm64: kaslr: ignore modulo offset when validating virtual displacement arm64: mm: abort uaccess retries upon fatal signal arm64: fpsimd: Prevent registers leaking across exec
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here are the (hopefully) last GPIO fixes for v4.13: - an important core fix to reject invalid GPIOs *before* trying to obtain a GPIO descriptor for it. - a driver fix for the mvebu driver IRQ handling" * tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: Fix cause computation in irq handler gpio: reject invalid gpio before getting gpio_desc
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Six minor and error leg fixes, plus one major change: the reversion of scsi-mq as the default. We're doing the latter temporarily (with a backport to stable) to give us time to fix all the issues that turned up with this default before trying again" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: call neigh_event_send() to update MAC address Revert "scsi: default to scsi-mq" scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd() scsi: aacraid: Fix out of bounds in aac_get_name_resp scsi: csiostor: fail probe if fw does not support FCoE scsi: megaraid_sas: fix error handle in megasas_probe_one
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix a clang build regression and an potential xattr corruption bug" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: add missing xattr hash update ext4: fix clang build regression
-
- 22 Aug, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fix from Lee Jones: "Revert duplicate commit in da9062-core" * tag 'mfd-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: Revert "mfd: da9061: Fix to remove BBAT_CONT register from chip model"
-
Catalin Marinas authored
With 16KB pages and a kernel Image larger than 16MB, the current kaslr_early_init() logic for avoiding mappings across swapper table boundaries fails since increasing the offset by kimg_sz just moves the problem to the next boundary. This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the Image crosses a PMD_SIZE boundary. Fixes: afd0e5a8 ("arm64: kaslr: Fix up the kernel image alignment") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Ard Biesheuvel authored
In the KASLR setup routine, we ensure that the early virtual mapping of the kernel image does not cover more than a single table entry at the level above the swapper block level, so that the assembler routines involved in setting up this mapping can remain simple. In this calculation we add the proposed KASLR offset to the values of the _text and _end markers, and reject it if they would end up falling in different swapper table sized windows. However, when taking the addresses of _text and _end, the modulo offset (the physical displacement modulo 2 MB) is already accounted for, and so adding it again results in incorrect results. So disregard the modulo offset from the calculation. Fixes: 08cdac61 ("arm64: relocatable: deal with physically misaligned ...") Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Mark Rutland authored
When there's a fatal signal pending, arm64's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Steve Capper <steve.capper@arm.com> Tested-by:
Steve Capper <steve.capper@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Tested-by:
James Morse <james.morse@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Dave Martin authored
There are some tricky dependencies between the different stages of flushing the FPSIMD register state during exec, and these can race with context switch in ways that can cause the old task's regs to leak across. In particular, a context switch during the memset() can cause some of the task's old FPSIMD registers to reappear. Disabling preemption for this small window would be no big deal for performance: preemption is already disabled for similar scenarios like updating the FPSIMD registers in sigreturn. So, instead of rearranging things in ways that might swap existing subtle bugs for new ones, this patch just disables preemption around the FPSIMD state flushing so that races of this type can't occur here. This brings fpsimd_flush_thread() into line with other code paths. Cc: stable@vger.kernel.org Fixes: 674c242c ("arm64: flush FP/SIMD state correctly after execve()") Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Lee Jones authored
This patch was applied to the MFD twice, causing unwanted behavour. This reverts commit b77eb79a. Fixes: b77eb79a ("mfd: da9061: Fix to remove BBAT_CONT register from chip model") Reported-by:
Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
- 21 Aug, 2017 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just a couple small fixes, two of which have to do with gcc-7: 1) Don't clobber kernel fixed registers in __multi4 libgcc helper. 2) Fix a new uninitialized variable warning on sparc32 with gcc-7, from Thomas Petazzoni. 3) Adjust pmd_t initializer on sparc32 to make gcc happy. 4) If ATU isn't available, don't bark in the logs. From Tushar Dave" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus() sparc64: remove unnecessary log message sparc64: Don't clibber fixed registers in __multi4. mm: add pmd_t initializer __pmd() to work around a GCC bug.
-
Thomas Petazzoni authored
When building the kernel for Sparc using gcc 7.x, the build fails with: arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’: arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized] cmd |= PCI_COMMAND_IO; ^~ The simplified code looks like this: unsigned int cmd; [...] pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); [...] cmd |= PCI_COMMAND_IO; I.e, the code assumes that pcic_read_config() will always initialize cmd. But it's not the case. Looking at pcic_read_config(), if bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will not be initialized. As a simple fix, we initialize cmd to zero at the beginning of pcibios_fixup_bus. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - PAE40 related updates - SLC errata for region ops - intc line masking by default * tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: Mask individual IRQ lines during core INTC init ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses ARC: dma: implement dma_unmap_page and sg variant ARCv2: SLC: Make sure busy bit is set properly for region ops ARC: [plat-sim] Include this platform unconditionally ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103 ARC: defconfig: Cleanup from old Kconfig options
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fix from Alexandre Belloni: "Fix regmap configuration for ds1307" * tag 'rtc-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix regmap config
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix IGMP handling wrt VRF, from David Ahern. 2) Fix timer access to freed object in dccp, from Eric Dumazet. 3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are triggerable by userspace. Also from Eric Dumazet. 4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian King. 5) Correct datagram peek handling of empty SKBs, from Matthew Dawson. 6) Fix use after free in TIPC, from Eric Dumazet. 7) When replacing a route in ipv6 we need to reset the round robin pointer, from Wei Wang. 8) Fix bug in pci_find_pcie_root_port() which was unearthed by the relaxed ordering changes, from Thierry Redding. I made sure to get an explicit ACK from Bjorn this time around :-) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: repair fib6 tree in failure case net_sched: fix order of queue length updates in qdisc_replace() tools lib bpf: improve warning switchdev: documentation: minor typo fixes bpf, doc: also add s390x as arch to sysctl description net: sched: fix NULL pointer dereference when action calls some targets rxrpc: Fix oops when discarding a preallocated service call irda: do not leak initialized list.dev to userspace net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled PCI: Allow PCI express root ports to find themselves tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set ipv6: reset fn->rr_ptr when replacing route sctp: fully initialize the IPv6 address in sctp_v6_to_addr() tipc: fix use-after-free tun: handle register_netdevice() failures properly datagram: When peeking datagrams with offset < 0 don't skip empty skbs bpf, doc: improve sysctl knob description netxen: fix incorrect loop counter decrement nfp: fix infinite loop on umapping cleanup ...
-
Oleg Nesterov authored
This was reported many times, and this was even mentioned in commit 52ee2dfd ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by:
Troy Kensinger <tkensinger@google.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Heiner Kallweit authored
Current max_register setting breaks reading nvram on certain chips and also reading the standard registers on RX8130 where register map starts at 0x10. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Fixes: 11e5890b "rtc: ds1307: convert driver to regmap" Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Wei Wang authored
In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Leblond authored
Signed-off-by:
Eric Leblond <eric@regit.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris Packham authored
Two typos in switchdev.txt Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Looks like this was accidentally missed, so still add s390x as supported eBPF JIT arch to bpf_jit_enable. Fixes: 014cd0a3 ("bpf: Update sysctl documentation to list all supported architectures") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 20 Aug, 2017 5 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
The 'move_paghes()' system call was introduced long long ago with the same permission checks as for sending a signal (except using CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability). That turns out to not be a great choice - while the system call really only moves physical page allocations around (and you need other capabilities to do a lot of it), you can check the return value to map out some the virtual address choices and defeat ASLR of a binary that still shares your uid. So change the access checks to the more common 'ptrace_may_access()' model instead. This tightens the access checks for the uid, and also effectively changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that anybody really _uses_ this legacy system call any more (we hav ebetter NUMA placement models these days), so I expect nobody to notice. Famous last words. Reported-by:
Otto Ebeling <otto.ebeling@iki.fi> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Another pile of small fixes and updates for x86: - Plug a hole in the SMAP implementation which misses to clear AC on NMI entry - Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line parameter works correctly again - Use the proper accessor in the startup64 code for next_early_pgt to prevent accessing of invalid addresses and faulting in the early boot code. - Prevent CPU hotplug lock recursion in the MTRR code - Unbreak CPU0 hotplugging - Rename overly long CPUID bits which got introduced in this cycle - Two commits which mark data 'const' and restrict the scope of data and functions to file scope by making them 'static'" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Constify attribute_group structures x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt' x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks x86: Fix norandmaps/ADDR_NO_RANDOMIZE x86/mtrr: Prevent CPU hotplug lock recursion x86: Mark various structures and functions as 'static' x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag x86/smpboot: Unbreak CPU0 hotplug x86/asm/64: Clear AC on NMI entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A few small fixes for timer drivers: - Prevent infinite recursion in the arm architected timer driver with ftrace - Propagate error codes to the caller in case of failure in EM STI driver - Adjust a bogus loop iteration in the arm architected timer driver - Add a missing Kconfig dependency to the pistachio clocksource to prevent build failures - Correctly check for IS_ERR() instead of NULL in the shared timer-of code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL clocksource/drivers/em_sti: Fix error return codes in em_sti_probe() clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two fixes for the perf subsystem: - Fix an inconsistency of RDPMC mm struct tagging across exec() which causes RDPMC to fault. - Correct the timestamp mechanics across IOC_DISABLE/ENABLE which causes incorrect timestamps and total time calculations" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix time on IOC_ENABLE perf/x86: Fix RDPMC vs. mm_struct tracking
-