- 11 Jun, 2003 30 commits
-
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Fix memory leak - free on copyin failure.
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Fix memory leak in emu10k1_audio_open.
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Use copy_to_user to copy mpu_synth_ioctl arg.
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Use copy_to_user/get_char with user buffers.
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Fixed copy/user problem in lento_symlink where user address was getting passed to presto_do_symlink. (From 2.4)
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Use copy_to_user, not memcpy with user buffers
-
Andrew Morton authored
From: Dipankar Sarma <dipankar@in.ibm.com> Fix parsing of options for X.25 facilities
-
Andrew Morton authored
From: Jeff Muizelaar <muizelaar@rogers.com> This patch against 2.5.70-bk2 removes the buffer allocation from resource.c and lets seq_read do it instead.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> Remove shmem_nrpages, no use is made of it (even 2.4-ac, though it counts it, does nothing with it): reintroduce if it becomes useful. Replace GPL oneliner by the block from 2.4-ac, extend Copyright to 2003, remove two white spaces.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> Dissatisfied with earlier fix to race where swapoff sneaks page into tmpfs page cache after truncate_inode_pages cleaned it: calling it a second time can be too heavy, instead fix shmem_unuse_inode to check i_size. (Actually, one part of this fix is in the previous patch: shmem_file_write now has a hold on the page when it raises i_size.)
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> generic_file_aio_write_nolock has recently been corrected for when partial writes hit -EFAULT: now bring shmem_file_write into line.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> loop_get_buffer loses PF_MEMDIE if it's added while in loop_copy_bio: not a high probability since it's not waiting there, but could happen, and sets a bad example (compare with add_to_swap fixed a while back).
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> loop_copy_bio uses one gfp_mask for bio_alloc and alloc_page calls. The bio_alloc obviously can't use highmem, but the alloc_page can. Yes, the underlying device might be unable to use highmem, and have to use one of its bounce buffers, with an extra copy: so be it. (Originally I did propagate the underlying device's bounce needs down to the loop device, to avoid that possible extra copy; but let's keep this simple, the low end doesn't have highmem and the high end can I/O it.)
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> What purpose does loop_make_request's blk_queue_bounce serve? None, it's just a relic from before the kmaps were added to loop's transfers, and ties up mempooled resources - in the file-backed case, with no guarantee they'll soon be freed. And what purpose does loop_set_fd's blk_queue_bounce_limit serve? None, blk_queue_make_request did that.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> Jonah Sherman <jsherman@stuy.edu> pointed out back in February how LO_FLAGS_BH_REMAP is never actually set, since loop_init_xfer only calls the init for non-0 encryption type. Fix that or scrap it? Let's scrap it for now, that path (hacking values in bio instead of copying data) seems never to have been tested, and adds to the number of paths through loop: leave that optimization to some other occasion.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> Remove unused IV from loop_make_request (loop_transfer_bio does that).
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> Remove copy flag and code from loop_copy_bio: wasn't used when reading, and waste of time when writing - the loop transfer function does that. And don't initialize bio fields immediately reinitialized by caller.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> Now it's in loop not bio, better rename bio_copy to loop_copy_bio: loop prefers names that way; and bio_transfer better named loop_transfer_bio. Rename bio,b to rbh,bio to follow call from loop_get_buffer more easily.
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> bio_copy is used only by the loop driver, which already has to walk the bio segments itself: so it makes sense to change it from bio.c export to loop.c static, as prelude to working upon it there. bio_copy itself is unchanged by this patch, with one exception. On oom failure it must use bio_put, instead of mempool_free to static bio_pool: which it should have been doing all along - it was leaking the veclist. (Grudgingly acked by Jens)
-
Andrew Morton authored
From: Hugh Dickins <hugh@veritas.com> When loop restricts underlying file's allocation mask to avoid deadlock, it unintentionally masks out its highmem capability, making failures at the underlying level much more likely.
-
Andrew Morton authored
From: "Ni, Michael" <Michael.Ni@hp.com> s/Compaq/HP/ in MAINTAINERS.
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> currently only x86_64 and ia64 don't use the generic irq_cpustat code and both have to workaround it's brokenness for the non-default case. x86_64 defines an empty irq_cpustat_t even if it doesn't need one and ia64 adds CONFIG_IA64 ifdefs around all users. What about this patch instead to make __ARCH_IRQ_STAT useable?
-
Linus Torvalds authored
-
John Levon authored
Ensure that the arch exit routines are always called when needed, previously we could end up with a nasty crash if using oprofile.timer=1, or the FS register failed.
-
John Levon authored
Remove some useless code, from Philippe Elie.
-
John Levon authored
Update the version information.
-
John Levon authored
Export the task->tgid to userspace as well. This is needed for forthcoming thread profiling stuff and should have been done in the original patch ... oh well. This requires an upgrade to oprofile 0.5.3. You can get it from the website, or, for the impatient, here : http://movementarian.org/oprofile-0.5.3.tar.gz
-
bk://ldm.bkbits.net/linux-2.5-coreLinus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
Patrick Mochel authored
into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-core
-
bk://bk.arm.linux.org.uk/linux-2.5-rmkLinus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
- 12 Jun, 2003 1 commit
-
-
Nicolas Pitre authored
Patch from Nicolas Pitre > Patch #1540/1 has had the following note added: > > Ok, it seems that we've had this for years and years, and it hasn't been > causing a problem. We've now got -Wa,-mno-fpu which should catch anything > which shouldn't be used anyway. > > Could you send a new patch for this change please? > > Update by: Russell King Here it is.
-
- 11 Jun, 2003 5 commits
-
-
Peter Milne authored
Patch from Peter Milne Peripheral Memory Mapped Register defs for Messaging, PBI, DMA, I2C
-
Nicolas Pitre authored
Patch from Nicolas Pitre The -march=armv5te issue looks to be fixed in gcc-3.3. Since gcc-3.3 is the only gcc version >= 3 that seems to correctly compile kernels out of the box I think it would be reasonable to apply this patch and no bother with older gcc versions. Yet gcc-3.3 emits V5TE instructions only when -mcpu=xscale is used, but that seems to have been fixed in current CVS so next gcc release will use all available instructions properly with -march=armv5te.
-
Deepak Saxena authored
Patch from Deepak Saxena This patch adds some hooks to arch/arm/Makefile to enable proper building of big-endian kernels. It also adds an option to the the top level arm KConfig that only allows a big-endian kernel to be built if the sub-arch KConfig sets the CONFIG_ARCH_SUPPORTS_BIG_ENDIAN boolean to true. This is mainly there to keep people from attemtpting to build a big-endian kernel for a system that is not capable of running in big-endian mode.
-
Deepak Saxena authored
Patch from Deepak Saxena
-
bk://bk.arm.linux.org.uk/linux-2.5-pcmciaLinus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
- 12 Jun, 2003 4 commits
-
-
Dominik Brodowski authored
Rename the socket_info_t inside tcic.c to struct tcic_socket. At one time there were at least five different "socket_info_t" within cardmgr / linux/drivers/pcmcia. Let's get rid of all of them to avoid confusion in future.
-
Dominik Brodowski authored
Rename the socket_info_t inside tcic.c to struct i82365_socket. At one time there were at least five different "socket_info_t" within cardmgr / linux/drivers/pcmcia. Let's get rid of all of them to avoid confusion in future.
-
Dominik Brodowski authored
The i82365 doesn't work unless CONFIG_ISA is set -- see this from i82365_init: ... sockets = 0; #ifdef CONFIG_ISA isa_probe(); #endif if (sockets == 0) { printk("not found.\n"); driver_unregister(&i82365_driver); return -ENODEV; } ... So, remove all instances of CONFIG_ISA from i82365.c and add a dependency to the Kconfig file.
-
Dominik Brodowski authored
Get rid of the typedef struct pcmcia_socket socket_info_t; by replacing all remaining usages of cs_internal's socket_info_t with struct pcmcia_socket.
-