- 13 Aug, 2015 1 commit
-
-
Olof Johansson authored
Merge tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Second batch of DT changes for 4.3: - Add the slow clock to the nodes that will use it - Add hlcd to the at91sam9x5 and at91sam9n12 - Add touchscreen and touch button support to the at91sam9x5ek * tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (22 commits) ARM: at91/dt: sama5d2: use slow clock where necessary ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller ARM: at91/dt: at91sam9x5dm: add support for the touschscreen ARM: at91/dt: add drm support for at91sam9n12ek ARM: at91/dt: enable lcd support for at91sam9x5 SoCs ARM: at91/dt: add at91sam9x5-ek Display Module dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi ARM: at91/dt: sama5d4: use slow clock where necessary ARM: at91/dt: sama5d3: use slow clock where necessary ARM: at91/dt: at91sam9x5: use slow clock where necessary ARM: at91/dt: at91sam9rl: use slow clock where necessary ARM: at91/dt: at91sam9n12: use slow clock where necessary ARM: at91/dt: at91sam9g45: use slow clock where necessary ARM: at91/dt: at91sam9263: use slow clock where necessary ARM: at91/dt: at91sam9261: use slow clock where necessary ARM: at91/dt: at91sam9260: use slow clock where necessary ARM: at91/dt: at91rm9200: use slow clock where necessary Documentation: dt: rtc: at91rm9200: add clocks property Documentation: watchdog: at91sam9_wdt: add clocks property ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 11 Aug, 2015 11 commits
-
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Third Round of Renesas ARM Based SoC DT Updates for v4.3 * Add JPU support: r8a7791 and r8a7790 SoCs * Add MMCIF and PFC support: r8a7794 SoC * Add initial support for r8a7794/silk * Add missing "gpio-ranges" to gpio nodes: sh73a0, r8a7740 and r8a73a4 SoCs * tag 'renesas-dt3-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio node ARM: shmobile: r8a7740 dtsi: Add missing "gpio-ranges" to gpio node ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node ARM: shmobile: silk: add eMMC DT support ARM: shmobile: r8a7794: add MMCIF DT support ARM: shmobile: silk: add Ether DT support ARM: shmobile: silk: initial device tree ARM: shmobile: r8a7794: add PFC DT support ARM: shmobile: r8a7791: Add JPU device node. ARM: shmobile: r8a7790: Add JPU device node. Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v4.3/dt-pt3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Omap device tree changes for v4.3 merge window. Pretty much all just trivial additions to configure devices for various SoCs and boards: - Updates for omap3-devkit8000 board support - M3 coprosessor, regulator, mux, RTC and eMMC updates for am437x - MMC, regmap, mux and dwc3 updates for dra7 and omap5 * tag 'omap-for-v4.3/dt-pt3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support ARM: dts: omap3-devkit8000: add LCD panels ARM: dts: omap3-devkit8000: Add DSS' DVI support ARM: dts: omap3-devkit8000: Add S-video output support ARM: dts: omap3-devkit8000: Add keymap support ARM: dts: omap3-devkit8000: Add PMU stat support ARM: dts: omap3-devkit8000: Add user button support ARM: dts: am437x-gp-evm: Add regulator-always-on and regulator-boot-on for RTC DCDCs ARM: dts: AM4372: Reorder the rtc compatible string ARM: dts: am437x-gp-evm: Add eMMC support ARM: dts: am437x-gp-evm: Add gpio-hog for configuring eMMC/NAND driver ARM: dts: am43xx: Introduce MUX_MODE9 for pinctrl ARM: dts: dra72-evm: Fix spurious card insert/removal interrupt ARM: dts: dra7-evm: Fix spurious card insert/removal interrupt ARM: dts: am57xx-beagle-x15: mmc1: remove redundant pbias-supply property ARM: dts: dra7-evm: Add MMCSD card removal GPIO ARM: dts: dra72-evm: Set max clock frequency of MMC1 and MMC2 ARM: dts: dra7-evm: add evm_3v3_sd regulator ARM: dts: dra72-evm: add evm_3v3_sd regulator ARM: dts: AM4372: Add the wkup_m3_ipc node ... Signed-off-by:
-
Masahiro Yamada authored
This is used as a base board for reference core modules. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Gregory Fong authored
Need the aon_pm_l2_intc and irq0_aon_intc descriptions, so included those as well. Signed-off-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
In the default Broadcom SDK the shared override is activated for this cache controller, do the same in the upstream code. Data and instruction prefetching is not activated by default for this cache controller on the bcm53xx SoC, do it manually like it is done in the vendor SDK. Signed-off-by:
-
Olof Johansson authored
Merge tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt ARM: sirf: dts update for 4.3 some missed dt nodes or props for sirf dts for 4.3. Among them: - G2D - PWM - JPEG - Multimedia - PMU(performance monitor unit) - GMAC - SDR(software digital radio) and its DMA - pinmux for NAND - GPIO key * tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: atlas7: add a GPIO key for rearview button ARM: dts: atlas7: put pinctl property to get pinmux for NAND ARM: dts: atlas7: add software digital radio nodes and its DMA channels ARM: dts: atlas7: add lost PWM node ARM: dts: atlas7: add lost G2D node ARM: dts: atlas7: add multimedia codec node ARM: dts: atlas7: add alias name for spi device ARM: dts: atlas7: add lost gmac node ARM: dts: atlas7: add performance monitor unit node ARM: dts: atlas7: add lost jpeg node Signed-off-by:
-
Masahiro Yamada authored
Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for PH1-LD6b reference board. Signed-off-by:
-
Masahiro Yamada authored
Initial version of UniPhier PH1-Pro5 device tree. Signed-off-by:
-
Masahiro Yamada authored
Add I2C controller device nodes for PH1-sLD3, PH1-LD4, PH1-sLD8 (FIFO-less I2C) and PH1-Pro4 (FIFO-builtin I2C). Signed-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung 1st DT updates for v4.3 - for exynos3250 : update video-phy node with syscon phandle - for exynos4210 : add CPU OPP and regulator supply property : use labels for overriding nodes for exynos4210-universal_c210 - for exynos4412-trats2 : set max17047 over heat and voltage thresholds - for exynos5250 and 5420 : extend exynos5250/5420-pinctrl nodes using labels : include exynos5250/5420-pinctrl after the nodes definitions - for exynos5410-smdk5410 : clean up indentation - for exynos5422-odroidxu3 : define default thermal-zones for exynos5422 : enable USB3 regulators, TMU and thermal-zones : add pwm-fan node * tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420 ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250 ARM: dts: Enable thermal-zones for exynos5422-odroidxu3 ARM: dts: Define default thermal-zones for exynos5422 ARM: dts: Enable TMU for exynos5422-odroidxu3 ARM: dts: Add pwm-fan node for exynos5422-odroidxu3 ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210 ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2 ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3 ARM: dts: Clean up indentation for exynos5410-smdk5410 ARM: dts: add CPU OPP and regulator supply property for exynos4210 ARM: dts: Update video-phy node with syscon phandle for exynos3250 Signed-off-by:
-
- 07 Aug, 2015 22 commits
-
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it to the currently defined nodes. Signed-off-by:Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Nicolas Ferre authored
The display module for at91sam9x5-ek has a few touch buttons, add support for those. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Alexandre Belloni authored
The display module on the at91sam9x5-ek has a resistive touchscreen, add it. Signed-off-by: -
Bo Shen authored
Add drm support for at91sam9n12ek board. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Josh Wu <josh.wu@atmel.com> Signed-off-by:
-
Boris Brezillon authored
Use the at91sam9x5 display module dtsi in the relevant board dts. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Boris Brezillon authored
All the at91sam9x5-ek share the share display module, add a dtsi to describe it. Signed-off-by:
-
Boris Brezillon authored
Actually make use of at91sam9x5_lcd.dtsi in the relevant SoC dtsis. Signed-off-by:
-
Boris Brezillon authored
Define at91sam9x5 hlcdc node for the SoCs with an LCD controller. Signed-off-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. [boris.brezillon@free-electrons.com: add tcb clocks] Signed-off-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary, The LCD PWM will be handled later. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the real-time timer, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. The LCD PWM will be handled later. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the real-time timer, the shutdown controller and the timer counters need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the two real-time timers, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the real-time timer, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the real-time timer, the shutdown controller, the timer counters need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The system timer, the RTC and the timer counters need the slow clock, add it. Acked-by:
-
Alexandre Belloni authored
The RTC needs an input clock, it is the slow clock. It is required as it will not function without it. Acked-by:
-
Alexandre Belloni authored
The watchdog has an input clock, the slow clock. It is required as it will not function without it. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
Boris Brezillon authored
The timer counters need the slow clock. It is required as they will not function without it. Signed-off-by:
-
Alexandre Belloni authored
The system timer (at91rm9200), the reset controller and the shutdown controller need an input clock. This is the slow clock and they will not function without it. Also fix the shutdown controller example. Acked-By:
Sebastian Reichel <sre@kernel.org> Acked-by:
-
- 06 Aug, 2015 6 commits
-
-
Anthoine Bourgeois authored
This patch is the touchscreen part for LCD screens sold with devkit8000 board. Signed-off-by:
Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner Device Tree changes for 4.3 A bunch of device tree patches that: - Enable the OTG controller on some boards - Various additions to the existing boards - New boards: A33 Ippo Q8H, Iteaduino Plus, * tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (35 commits) ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq ARM: dts: sun5i: hsg-h702: Enable USB OTG controller ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime ARM: sunxi: dt: Convert users to the PIO interrupts binding ARM: dts: sun4i: Add Iteaduino Plus A10 ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic ARM: dts: axp152: Add a dtsi file for the axp152 pmic ARM: dts: sun6i: Enable otg controller on the cs908 ARM: dts: sun4i: Enable otg controller on the mini-x ARM: dts: sun4i: Enable otg controller on the ba10-tvbox ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes devicetree: Add msi to the vendor-prefix list ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33 ARM: dts: sun8i: sina33: Enable USB hosts ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets ... Signed-off-by:
-
Anthoine Bourgeois authored
Devkit8000 was sold with a 4.3" LCD or 7.0" or without. This patch creates one dts file per bundle. Signed-off-by:
-
Anthoine Bourgeois authored
This commit adds the support of DVI output on the devkit8000 board. Signed-off-by:
-
Anthoine Bourgeois authored
This commit adds the support of TV output on the devkit8000 board. Signed-off-by:
-
Anthoine Bourgeois authored
The keymap is convert in devicetree from the legacy board file. Signed-off-by:
-
