- 01 Jul, 2019 40 commits
-
-
Fabian Krueger authored
Replaced __attribute__((packed)) with __packed. Both ways of attributing are equivalent, but being shorter, __packed should be preferred. This refactoring makes the core more readable. Signed-off-by:
Fabian Krueger <fabian.krueger@fau.de> Signed-off-by:
Michael Scheiderer <michael.scheiderer@fau.de> Cc: <linux-kernel@i4.cs.fau.de> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabian Krueger authored
After the declarations in a function, there should be a blank line, so that the declaration part is visibly separated from the rest. This refactoring makes the code more readable. Signed-off-by:
-
Fabian Krueger authored
To fix some checkpatch-warnings some lines of this module had to be shortened so that they do not exceed 80 characters per line. This refactoring makes the code more readable. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function dm_backup_dynamic_mechanism_state. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Change type of function rtl8192_rx_initiate from int to void as it always returns 0 and this value is never used. Signed-off-by:
-
Hariprasad Kelam authored
pHalData is not being used in halbtcoutsrc_LeaveLowPower. So remove the same. Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
-
Hariprasad Kelam authored
fix below issues reported by checkpatch CHECK: Using comparison to true is error prone CHECK: Using comparison to false is error prone Signed-off-by:
-
Dave Stevenson authored
The V4L2 control API was expanded to take 64 bit values in commit 0ba2aeb6 (Apr 16 2014), but as this driver wasn't in the mainline kernel at that point this was overlooked. Update to use 64 bit values. This also fixes a couple of warnings in 64 bit builds. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Dave Stevenson authored
Fixes a v4l2-compliance failure v4l2-test-buffers.cpp(415): g_field() == V4L2_FIELD_ANY The driver only ever produces progresive frames, so field should always be set to V4L2_FIELD_NONE. Signed-off-by:
-
Dave Stevenson authored
Fixes a v4l2-compliance failure when passed a buffer that is too small. queue_setup wasn't handling the case where *nplanes != 0, as used from CREATE_BUFS and requiring the driver to sanity check the provided buffer parameters. It was assuming that it was always being used in the REQBUFS case where it provides the buffer properties. Signed-off-by:
-
Dave Stevenson authored
RGB3/BGR3 end up being 3 bytes per pixel, which meant that the alignment code ended up trying to align using bitmasking with a mask of 96. That doesn't work, so switch to an arithmetic alignment for those formats. Signed-off-by:
-
Dave Stevenson authored
Fixes up a checkpatch error "Avoid using bool structure members because of possible alignment issues". Signed-off-by:
-
Dave Stevenson authored
Remove a todo which has been done. Remove a template line that was redundant. Make a comment clearer as to the non-obvious meaning of a field. Signed-off-by:
-
Dave Stevenson authored
With V4L2_CID_COLORFX_CBCR calling ctrl_set_colfx it was incorrectly assigning the colour values to the enable field of dev->colourfx instead of the u and v fields. Correct the assignments. Reported as a Coverity issue Detected by CoverityScan CID#1419711 ("Unused value") Reported-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dave Stevenson authored
Controls of type MMAL_CONTROL_TYPE_STD_MENU call v4l2_ctrl_new_std_menu with a max value and a mask. The max value is one of the defined values for the control, however in the config array there are several entries where raw numbers have been used instead. Replace these with the appropriate enum. Signed-off-by:
-
Dave Stevenson authored
Fixes up all the checkpatch error "line over 80 characters" in mmal-parameters.h Signed-off-by:
-
Dave Stevenson authored
Clear checkpatch complaints of "multiple assignments should be avoided" Signed-off-by:
-
Dave Stevenson authored
Most of the headers use ifndef FOO_H, whilst mmal-parameters.h used ifndef __FOO_H. Revise mmal-parameters.h to drop the underscores and make the headers all consistent. Signed-off-by:
-
Dave Stevenson authored
mmal-common.h and mmal-msg.h didn't have the normal ifndef FOO / define FOO / endif protection to stop it being included multiple times. Add it. Signed-off-by:
-
Dave Stevenson authored
Set the sequence number in vb2_v4l2_buffer mainly so the latest v4l2-ctl reports the frame rate correctly. Signed-off-by:
-
Dave Stevenson authored
The change to mapping V4L2 to MMAL buffers 1:1 didn't handle the condition we get with raw pixel buffers (eg YUV and RGB) direct from the camera's stills port. That sends the pixel buffer and then an empty buffer with the EOS flag set. The EOS buffer wasn't handled and returned an error up the stack. Handle the condition correctly by returning it to the component if streaming, or returning with an error if stopping streaming. Fixes: 93841670 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by:
-
Dave Stevenson authored
Before commit "staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping" there was a need to ensure that there were sufficient buffers supplied from the user to cover those being sent to the VPU (always 1). Now the buffers are linked 1:1 between MMAL and V4L2, therefore there is no need for that check, and indeed it is wrong as there is no need to submit all the buffers before starting streaming. Fixes: 93841670 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by:
-
Dave Stevenson authored
With the recent change to match MMAL and V4L2 buffers there is a need to wait for all MMAL buffers to be returned during stop_streaming. Fixes: 93841670 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by:
-
Dave Stevenson authored
Fix checkpatch "Alignment should match open parenthesis" errors. Signed-off-by:
-
Dave Stevenson authored
Fix checkpatch errors for missing blank lines after variable or structure declarations. Signed-off-by:
-
Dave Stevenson authored
Fix mismatched or missing brace issues flagged by checkpatch. Signed-off-by:
-
Dave Stevenson authored
Fix checkpatch errors "Avoid multiple line dereference" Signed-off-by:
-
Dave Stevenson authored
We have numerous lines over 80 chars, or oddly split. Many of these are due to using long enum names such as MMAL_COMPONENT_CAMERA. Reduce the length of these enum names. Signed-off-by:
-
Dave Stevenson authored
Fix checkpatch warnings over spaces around operators. Many were around operations that can be replaced with the BIT(x) macro, so replace with that where appropriate. Signed-off-by:
-
Dave Stevenson authored
Fix comment style violations in the header files. Signed-off-by:
-
Dave Stevenson authored
None of the listed author email addresses were valid. Keep list of authors and the companies they represented. Update my email address. Signed-off-by:
-
Dave Stevenson authored
Fix several instances where it is easier to return early on error conditions than handle it as an else clause. As requested by Mauro. Signed-off-by:
-
Dave Stevenson authored
Forward MMAL key frame flags to the V4L2 buffers. Signed-off-by:
-
Dave Stevenson authored
vchi_bulk_queue_receive will queue up to a default of 4 bulk receives on a connection before blocking. If called from the VCHI service_callback thread, then that thread is unable to service the VCHI_CALLBACK_BULK_RECEIVED events that would enable the queue call to succeed. Add a workqueue to schedule the call vchi_bulk_queue_receive in an alternate context to avoid the lock up. Signed-off-by:
-
Dave Stevenson authored
The commit "staging: bcm2835-camera: Replace open-coded idr with a struct idr." replaced an internal implementation of an idr with the standard functions and a spinlock. idr_alloc(GFP_KERNEL) can sleep whilst calling kmem_cache_alloc to allocate the new node, but this is not valid whilst in an atomic context due to the spinlock. There is no need for this to be a spinlock as a standard mutex is sufficient. Fixes: 950fd867 ("staging: bcm2835-camera: Replace open-coded idr with a struct idr.") Signed-off-by:
-
Dave Stevenson authored
When handling for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER was added the firmware would reject the setting if H264 hadn't already been selected. This was fixed in the firmware at that point, but to enable backwards compatibility the returned error was ignored. That was Dec 2013, so the chances of having a firmware that still has that issue is so close to zero that the workaround can be removed. Link: https://github.com/raspberrypi/linux/pull/2782/Signed-off-by:
-
Hariprasad Kelam authored
Below list of functions returns 0 in success and -EINVAL in failure. So directly return 0 on Success. Signed-off-by:
-
Nishka Dasgupta authored
Remove the declarations of the following unused functions from rtw_eeprom.h: - eeprom_write16 - eeprom_read16 - eeprom_read_sz - read_eeprom_content - read_eeprom_content_by_attrib. Signed-off-by:
-
Nishka Dasgupta authored
Remove function ODM_TXPowerTrackingCheck as all it does is call odm_TXPowerTrackingCheckCE. Rename odm_TXPowerTrackingCheckCE to ODM_TXPowerTrackingCheck for compatibility with call sites. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function odm_TXPowerTrackingInit as all it does is call odm_TXPowerTrackingThermalMeterInit. Rename odm_TXPowerTrackingThermalMeterInit to odm_TXPowerTrackingInit for compatibility with call sites. Issue found with Coccinelle. Signed-off-by:
-
