Currently, lp55xx_of_populate_pdata() allocates lp55xx_platform_data if
it's null. And it parses the DT and copies values into the
'client->dev.platform_data'. This may have architectural issue.
Platform data is configurable through the DT or I2C board info inside the
platform area. However, lp55xx common driver changes this configuration
when it is loaded. So 'client->dev.platform_data' is not null anymore.
Eventually, the driver initialization is not identical when it's unloaded
and loaded again.
The lp55xx common driver should use the private data, 'lp55xx_chip->pdata'
instead of changing the original platform data.

So, lp55xx_of_populate_pdata() is modified as follows.
* Do not update 'dev->platform_data'. Return the pointer of new allocated
   lp55xx_platform_data. Then the driver points it to private data,
   'lp55xx_chip->pdata'.
* Each lp55xx driver checks the pointer and handles an error case.

Then, original platform data configuration will be kept regardless of
loading or unloading the driver.
The driver allocates the memory and copies them from the DT if it's NULL.
After the driver is loaded again, 'client->dev.platform_data' is same as
initial load, so the driver is initialized identically.

Cc: Toshi Kikuchi <toshik@chromium.org>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

syscon_node_to_regmap() returns a regmap or an ERR_PTR().
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use resource-managed function devm_led_classdev_register instead
of led_classdev_register to make the error-path simpler.

To be compatible with the change, various gotos are replaced with
direct returns and unneeded labels are dropped. Also, remove
fsg_led_remove as it is now redundant.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch removes Bryan Wu from the list of LED subsystem
maintainers and replaces related git tree URL with the one
maintained by Jacek Anaszewski.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Bryan Wu <cooloney@gmail.com>

Devices found by class_find_device must be freed with put_device().
Otherwise the reference count will not work properly.

Fixes: a96aa64c ("leds/led-class: Handle LEDs with the same name")
Reported-by: Alan Tull <delicious.quinoa@gmail.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Since the LED modes mapping is no longer hardcoded inside the leds-ns2
driver, then it must be provided through the modes-map property in the
ns2-leds nodes.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This checking is done by regmap_get_i2c_bus() which is called in
devm_regmap_init_i2c().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

The leds-ns2 driver is also used by the n090401 board (Seagate NAS
4-Bay), which is based on the Marvell Armada-370 SoC.

Then this patch allows to select the leds-ns2 driver if MACH_ARMADA_370
is enabled. Additionally, this also updates the Kconfig help message.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

On the board n090401 (Seagate NAS 4-Bay), some of the LEDs are handled
by the leds-ns2 driver. This LEDs are connected to an I2C GPIO expander
(PCA95554PW) which means that GPIO access may sleep. This patch makes
leds-ns2 compatible with such GPIOs by using the *_cansleep() variant of
the GPIO functions. As a drawback this functions can't be used safely in
a timer context (with the timer LED trigger for example). To fix this
issue, a workqueue mechanism (copied from the leds-gpio driver) is used.

Note that this patch also updates slightly the ns2_led_sata_store
function. The LED state is now retrieved from cached values instead of
reading the GPIOs previously. This prevents ns2_led_sata_store from
working with a stale LED state (which may happen when a delayed work
is pending).
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO
values to LED mode) is different from the one used on other boards
supported by the leds-ns2 driver.

With this patch the hardcoded mapping is removed from leds-ns2. Now,
it must be defined either in the platform data (if an old-fashion board
setup file is used) or in the DT node. In order to allow the later, this
patch also introduces a modes-map property for the leds-ns2 DT binding.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

These reg_default tables are not modified after initialized, so make them
const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

If COMPILE_TEST is enabled, relax the dependency on GPIOLIB for the
recently introduced symbols LEDS_AAT1290 and LEDS_KTD2692.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

1. Since max-microamp property has had no users so far, then rename
   it to more descriptive led-max-microamp.
2. Since flash-timeout-us property has had no users so far, then rename
   it to more accurate flash-max-timeout-us.
3. Describe led-max-microamp property as mandatory for specific board
   configurations.
4. Make flash-max-microamp and flash-max-timeout-us properties mandatory
   for devices with configurable flash current and flash timeout settings
   respectively.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: devicetree@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Pull SCSI fixes from James Bottomley:
 "A couple of major (hang and deadlock) fixes with fortunately fairly
  rare triggering conditions.  The PM oops is only really triggered by
  people using enclosure services (rare) and the fnic driver is mostly
  used in enterprise environments"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: Fix NULL pointer dereference in runtime PM
  fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack

Pull MIPS bug fixes from Ralf Baechle:
 "Two more fixes for 4.2.

  One fixes a build issue with the LLVM assembler - LLVM assembler macro
  names are case sensitive, GNU as macro names are insensitive; the
  other corrects a license string (GPL v2, not GPLv2) such that the
  module loader will recognice the license correctly"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  FIRMWARE: bcm47xx_nvram: Fix module license.
  MIPS: Fix LLVM build issue.

Pull 9p regression fix from Al Viro:
 "Fix for breakage introduced when switching p9_client_{read,write}() to
  struct iov_iter * (went into 4.1)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  9p: ensure err is initialized to 0 in p9_client_read/write

Some use of those functions were providing unitialized values to those
functions. Notably, when reading 0 bytes from an empty file on a 9P
filesystem, the return code of read() was not 0.

Tested with this simple program:

    #include <assert.h>
    #include <sys/types.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <unistd.h>

    int main(int argc, const char **argv)
    {
        assert(argc == 2);
        char buffer[256];
        int fd = open(argv[1], O_RDONLY|O_NOCTTY);
        assert(fd >= 0);
        assert(read(fd, buffer, 0) == 0);
        return 0;
    }

Cc: stable@vger.kernel.org # v4.1
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull ARM fixes from Russell King:
 "Another couple of small ARM fixes.

  A patch from Masahiro Yamada who noticed that "make -jN all zImage"
  would end up generating bad images where N > 1, and a patch from
  Nicolas to fix the Marvell CPU user access optimisation code when page
  faults are disabled"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8418/1: add boot image dependencies to not generate invalid images
  ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage

Pull x86 fixes from Ingo Molnar:
 "Various low level fixes: fix more fallout from the FPU rework and the
  asm entry code rework, plus an MSI rework fix, and an idle-tracing fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/math-emu: Fix crash in fork()
  x86/fpu/math-emu: Fix math-emu boot crash
  x86/idle: Restore trace_cpu_idle to mwait_idle() calls
  x86/irq: Build correct vector mapping for multiple MSI interrupts
  Revert "sched/x86_64: Don't save flags on context switch"

Pull perf fixes from Ingo Molnar:
 "Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Show backtrace when handling a SIGSEGV on --stdio mode
  perf tools: Fix buildid processing
  perf tools: Make fork event processing more resilient
  perf tools: Avoid deadlock when map_groups are broken

Pull irq fixes from Thomas Gleixner:
 "A series of small fixlets for a regression visible on OMAP devices
  caused by the conversion of the OMAP interrupt chips to hierarchical
  interrupt domains.  Mostly one liners on the driver side plus a small
  helper function in the core to avoid open coded mess in the drivers"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/crossbar: Restore set_wake functionality
  irqchip/crossbar: Restore the mask on suspend behaviour
  ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism
  irqchip/crossbar: Restore the irq_set_type() mechanism
  genirq: Introduce irq_chip_set_type_parent() helper
  genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy

Pull timer fixes from Thomas Gleixner:
 "Two minimalistic fixes for 4.2 regressions:

   - Eric fixed a thinko in the timer_list base switching code caused by
     the overhaul of the timer wheel.  It can cause a cpu to see the
     wrong base for a timer while we move the timer around.

   - Guenter fixed a regression for IMX if booted w/o device tree, where
     the timer interrupt is not initialized and therefor the machine
     fails to boot"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/imx: Fix boot with non-DT systems
  timer: Write timer->flags atomically

During later stages of math-emu bootup the following crash triggers:

	 math_emulate: 0060:c100d0a8
	 Kernel panic - not syncing: Math emulation needed in kernel
	 CPU: 0 PID: 1511 Comm: login Not tainted 4.2.0-rc7+ #1012
	 [...]
	 Call Trace:
	  [<c181d50d>] dump_stack+0x41/0x52
	  [<c181c918>] panic+0x77/0x189
	  [<c1003530>] ? math_error+0x140/0x140
	  [<c164c2d7>] math_emulate+0xba7/0xbd0
	  [<c100d0a8>] ? fpu__copy+0x138/0x1c0
	  [<c1109c3c>] ? __alloc_pages_nodemask+0x12c/0x870
	  [<c136ac20>] ? proc_clear_tty+0x40/0x70
	  [<c136ac6e>] ? session_clear_tty+0x1e/0x30
	  [<c1003530>] ? math_error+0x140/0x140
	  [<c1003575>] do_device_not_available+0x45/0x70
	  [<c100d0a8>] ? fpu__copy+0x138/0x1c0
	  [<c18258e6>] error_code+0x5a/0x60
	  [<c1003530>] ? math_error+0x140/0x140
	  [<c100d0a8>] ? fpu__copy+0x138/0x1c0
	  [<c100c205>] arch_dup_task_struct+0x25/0x30
	  [<c1048cea>] copy_process.part.51+0xea/0x1480
	  [<c115a8e5>] ? dput+0x175/0x200
	  [<c136af70>] ? no_tty+0x30/0x30
	  [<c1157242>] ? do_vfs_ioctl+0x322/0x540
	  [<c104a21a>] _do_fork+0xca/0x340
	  [<c1057b06>] ? SyS_rt_sigaction+0x66/0x90
	  [<c104a557>] SyS_clone+0x27/0x30
	  [<c1824a80>] sysenter_do_call+0x12/0x12

The reason is the incorrect assumption in fpu_copy(), that FNSAVE
can be executed from math-emu kernels as well.

Don't try to copy the registers, the soft state will be copied
by fork anyway, so the child task inherits the parent task's
soft math state.

With this fix applied math-emu kernels boot up fine on modern
hardware and the 'no387 nofxsr' boot options.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

On a math-emu bootup the following crash occurs:

	Initializing CPU#0
	------------[ cut here ]------------
	kernel BUG at arch/x86/kernel/traps.c:779!
	invalid opcode: 0000 [#1] SMP
	[...]
	EIP is at do_device_not_available+0xe/0x70
	[...]
	Call Trace:
	 [<c18238e6>] error_code+0x5a/0x60
	 [<c1002bd0>] ? math_error+0x140/0x140
	 [<c100bbd9>] ? fpu__init_cpu+0x59/0xa0
	 [<c1012322>] cpu_init+0x202/0x330
	 [<c104509f>] ? __native_set_fixmap+0x1f/0x30
	 [<c1b56ab0>] trap_init+0x305/0x346
	 [<c1b548af>] start_kernel+0x1a5/0x35d
	 [<c1b542b4>] i386_start_kernel+0x82/0x86

The reason is that in the following commit:

  b1276c48 ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()")

I failed to consider math-emu's limitation that it cannot execute the
FNINIT instruction in kernel mode.

The long term fix might be to allow math-emu to execute (certain) kernel
mode FPU instructions, but for now apply the safe (albeit somewhat ugly)
fix: initialize the emulation state explicitly without trapping out to
the FPU emulator.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

While the idea behind get_maintainer seems highly useful it's
unfortunately way to trigger happy to grab people that once had a few
commits to files.  For someone like me who does a lot of tree-wide API
work that leads to an incredible amount of Cc spam.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c48a11c7 ("netvm: propagate page->pfmemalloc to skb") added
checks for page->pfmemalloc to __skb_fill_page_desc():

        if (page->pfmemalloc && !page->mapping)
                skb->pfmemalloc = true;

It assumes page->mapping == NULL implies that page->pfmemalloc can be
trusted.  However, __delete_from_page_cache() can set set page->mapping
to NULL and leave page->index value alone.  Due to being in union, a
non-zero page->index will be interpreted as true page->pfmemalloc.

So the assumption is invalid if the networking code can see such a page.
And it seems it can.  We have encountered this with a NFS over loopback
setup when such a page is attached to a new skbuf.  There is no copying
going on in this case so the page confuses __skb_fill_page_desc which
interprets the index as pfmemalloc flag and the network stack drops
packets that have been allocated using the reserves unless they are to
be queued on sockets handling the swapping which is the case here and
that leads to hangs when the nfs client waits for a response from the
server which has been dropped and thus never arrive.

The struct page is already heavily packed so rather than finding another
hole to put it in, let's do a trick instead.  We can reuse the index
again but define it to an impossible value (-1UL).  This is the page
index so it should never see the value that large.  Replace all direct
users of page->pfmemalloc by page_is_pfmemalloc which will hide this
nastiness from unspoiled eyes.

The information will get lost if somebody wants to use page->index
obviously but that was the case before and the original code expected
that the information should be persisted somewhere else if that is
really needed (e.g.  what SLAB and SLUB do).

[akpm@linux-foundation.org: fix blooper in slub]
Fixes: c48a11c7 ("netvm: propagate page->pfmemalloc to skb")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.com>
Debugged-by: Jiri Bohac <jbohac@suse.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for ASPM-related NULL pointer dereference crashes on
  Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
  PA-RISC.  These are both caused by things we merged in the v4.2 merge
  window.  Details:

  Resource management
    - Don't use 64-bit bus addresses on PA-RISC

  Miscellaneous
    - Tolerate hierarchies with no Root Port"

* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Don't use 64-bit bus addresses on PA-RISC
  PCI: Tolerate hierarchies with no Root Port

Pull media fixes from Mauro Carvalho Chehab:

 - a regression fix at the videobuf2 core driver

 - fix error handling at mantis probing code

 - revert the IR encode patches, as the API is not mature enough.
   So, better to postpone the changes to a latter Kernel

 - fix Kconfig breakages on some randconfig scenarios.

* tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] mantis: Fix error handling in mantis_dma_init()
  Revert "[media] rc: rc-ir-raw: Add scancode encoder callback"
  Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper"
  Revert "[media] rc: ir-rc5-decoder: Add encode capability"
  Revert "[media] rc: ir-rc6-decoder: Add encode capability"
  Revert "[media] rc: rc-core: Add support for encode_wakeup drivers"
  Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"
  Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback"
  [media] vb2: Fix compilation breakage when !CONFIG_BUG
  [media] vb2: Only requeue buffers immediately once streaming is started
  [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled
  [media] media/dvb: fix ts2020.c Kconfig and build

Pull input layer fix from Dmitry Torokhov:
 "A small fixup to gpio_keys_polled driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio_keys_polled - request GPIO pin as input.

Pull drm fixes from Dave Airlie:
 "A bunch of i915 fixes, one revert a VBT fix that was a bit premature,
  and some braswell feature removal that the hw actually didn't support.

  One radeon race fix at boot, and one hlcdc build fix, one fix from
  Russell that fixes build as well with new audio features.

  This is hopefully all I have until -next"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: fix hotplug race at startup
  drm/edid: add function to help find SADs
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
  drm/i915: Flag the execlists context object as dirty after every use

We apparantly get a hotplug irq before we've initialised
modesetting,

[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf674028 #111
Hardware name: MicroLink                               /D850MV                         , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
 f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
 f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
 [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
 [<c125f162>] ? mutex_lock+0x9/0xa
 [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
 [<c1034741>] ? process_one_work+0xfc/0x194
 [<c1034b58>] ? worker_thread+0x18d/0x218
 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
 [<c103742a>] ? kthread+0x7b/0x80
 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
 [<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63
Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.

Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.

Finally a gpu state fix from Chris, also cc: stable.

* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/i915: Flag the execlists context object as dirty after every use

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix a recent regression in the ACPI backlight code and a memory
  leak in the Exynos cpufreq driver.

  Specifics:

   - Fix a recently introduced issue in the ACPI backlight code which
     causes lockdep to complain about a circular lock dependency during
     initialization (Hans de Goede).

   - Fix a possible memory during initialization in the Exynos cpufreq
     driver (Shailendra Verma)"

* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
  ACPI / video: Fix circular lock dependency issue in the video-detect code

* acpi-video:
  ACPI / video: Fix circular lock dependency issue in the video-detect code

* cpufreq-fixes:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match

Meelis and Helge reported that 3a9ad0b4 ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.

PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to 3a9ad0b4, we always used 32-bit PCI addresses.  After
3a9ad0b4, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.

Fixes: 3a9ad0b4 ("PCI: Add pci_bus_addr_t")
Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.eeReported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Based-on-idea-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org	# v3.19+

Commit b253149b ("sched/idle/x86: Restore mwait_idle() to fix boot
hangs, to improve power savings and to improve performance") restores
mwait_idle(), but the trace_cpu_idle related calls are missing. This
causes powertop on my old desktop powered by Intel Core2 E6550 to
report zero wakeups and zero events.

Add them back to restore the proper behaviour.

Fixes: b253149b ("sched/idle/x86: Restore mwait_idle() to ...")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Cc: <len.brown@intel.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1440046479-4262-1-git-send-email-jszhang@marvell.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull networking fixes from David Miller:

 1) Out of bounds array access in 802.11 minstrel code, from Adrien
    Schildknecht.

 2) Don't use skb_get() in IGMP/MLD code paths, as this makes
    pskb_may_pull() BUG.  From Linus Luessing.

 3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.

 4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.

 5) Fix ppp device deregistration wrt.  netns deletion, from Guillaume
    Nault.

 6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
    Lau.

 7) Fix memory leak in batman-adv code, from Sven Eckelmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  batman-adv: Fix memory leak on tt add with invalid vlan
  net: phy: fix semicolon.cocci warnings
  net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
  be2net: avoid vxlan offloading on multichannel configs
  ipv6: Fix a potential deadlock when creating pcpu rt
  ipv6: Add rt6_make_pcpu_route()
  ipv6: Remove un-used argument from ip6_dst_alloc()
  net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
  net: ethernet: micrel: fix an error code
  ppp: fix device unregistration upon netns deletion
  net: phy: fix PHY_RUNNING in phy_state_machine
  Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
  inet: fix potential deadlock in reqsk_queue_unlink()
  gianfar: Restore link state settings after MAC reset
  ipv4: off-by-one in continuation handling in /proc/net/route
  net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
  mac80211: fix invalid read in minstrel_sort_best_tp_rates()