- 30 Jan, 2008 40 commits
-
-
Harvey Harrison authored
Adding the address of the faulting library missed removing a line ending from X86_32. Also update the shorter printk format for X86_32 in fault_64.c to make it easier to se the remaining differences. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Andi Kleen authored
Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Previously there was a AMD specific quirk to handle the case of AMD Fam10h MWAIT not supporting any C states. But it turns out that CPUID already has ways to detectly detect that without using special quirks. The new code simply checks if MWAIT supports at least C1 and doesn't use it if it doesn't. No more vendor specific code. Note this is does not simply clear MWAIT because MWAIT can be still useful even without C states. Credit goes to Ben Serebrin for pointing out the (nearly) obvious. Cc: "Andreas Herrmann" <andreas.herrmann3@amd.com> Signed-off-by:
-
Andi Kleen authored
Previously it was only run for Intel CPUs, but AMD Fam10h implements MWAIT too. This matches 64bit behaviour. Signed-off-by:
-
Harvey Harrison authored
Choose a less generic name for such a special case. Add a comment explaining the odd use in X86_32. Change the one user of stack_pointer. Signed-off-by:
-
Harvey Harrison authored
Leave definition of pt_regs in its own section, move all kernel code to section afterwards, unify prototype definitions, has some conditional prototypes to make it clear what was only defined in 32 and 64 bit. Signed-off-by:
-
Harvey Harrison authored
Unify the definiton of: v8086_mode user_mode user_mode_vm stack_pointer instruction_pointer frame_pointer in ptrace.h to make it clear where the differences are between 32 and 64 bit. Changes macros to static inlines as well. Signed-off-by:
-
Hiroshi Shimamoto authored
kdump needs ELF_CORE_COPY_REGS in crash_save_cpu(). This lack of the macro causes the following BUG. SysRq : Trigger a crashdump ------------[ cut here ]------------ kernel BUG at include/linux/elfcore.h:105! invalid opcode: 0000 [1] PREEMPT SMP Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by:
-
Dmitri Vorobiev authored
This is against current x86.git. The size of the system call table for 32-bit x86 kernels is obtained by compile-time calculation of the sys_call_table array, not from the value, which the NR_syscalls macro expands to. This trivial patch removes the fossil macro. Manually tested by grepping the x86 files for the "NR_syscalls" string. No relevant use cases found. Build-tested using allyesconfig, allnoconfig and a couple of randconfig instances. All builds successfully finished. Runtime test performed using a stripped-down Debian-ish config. The system booted successfully. Signed-off-by:
Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by:
-
Kyle McMartin authored
PSE, PGE, XMM, XMM2, and FXSR are defined as required features, and will be optimized to a constant at compile time. Remove their redundant definitions. Signed-off-by:
Kyle McMartin <kyle@mcmartin.ca> Signed-off-by:
-
travis@sgi.com authored
This patch removes the EXPORT_SYMBOL for: x86_cpu_to_node_map_init x86_cpu_to_node_map_early_ptr ... thus fixing the section mismatch problem. Also, the mem -> node hash lookup is fixed. Signed-off-by:
Mike Travis <travis@sgi.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Remove duplicate set_pud()s. Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Remove duplicate set_pmd()s. Signed-off-by:
-
Jeremy Fitzhardinge authored
Remove duplicate set_pte* operations. PAE still needs to have special variants of some of these because it can't atomically update a 64-bit pte, so there's still some duplication. Signed-off-by:
-
Jeremy Fitzhardinge authored
Remove duplicate __pmd/pmd_val functions. Signed-off-by:
-
Jeremy Fitzhardinge authored
Remove duplicate __pgd/pgd_val functions. Signed-off-by:
-
Jeremy Fitzhardinge authored
Remove duplicate __pte/pte_val functions. Signed-off-by:
-
Jeremy Fitzhardinge authored
Rearrange the various pagetable mmu_ops to remove duplication. Signed-off-by:
-
Jeremy Fitzhardinge authored
Signed-off-by:
-
Andrew Morton authored
WARNING: vmlinux.o(__ksymtab+0x670): Section mismatch: reference to .init.data:x86_cpu_to_node_map_init (between '__ksymtab_x86_cpu_to_node_map_init' and '__ksymtab_node_data') Cc: Matthew Dobson <colpatch@us.ibm.com> Cc: Mike Travis <travis@sgi.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mike Travis authored
Signed-off-by:
-
Jan Beulich authored
Based on patch from Jan Beulich <jbeulich@novell.com>. Don't rely on kmalloc(PAGE_SIZE) returning PAGE_SIZE aligned memory (Xen requires GDT *and* LDT to be page-aligned). Using the page allocator interface also removes the (albeit small) slab allocator overhead. The same change being done for 64-bits for consistency. Further, the Xen hypercall interface expects the LDT address to be virtual, not machine. [ Adjusted to unified ldt.c - Jeremy ] Signed-off-by:
Jan Beulich <jbeulich@novell.com> Acked-by:
-
Jan Beulich authored
Remove the dead .text.lock. Move _etext and __{start,stop}___ex_table into their sections. Signed-off-by: -
Alan Cox authored
I can find no reason for the _p on the serverworks IRQ routing logic, and a review of the documentation contains no indication that any such delay is needed so lets try this Signed-off-by:
-
Alan Cox authored
Rather than remove and/or mangle inb_p/outb_p we want to remove the use of them from inappropriate places. For the PIC/PIT this may eventually depend on 32/64bitism or similar so start by adding inb/outb_pit and inb/outb_pic so that we can make them use any scheme we settle on without disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can make inb_pit use udelay without messing up inb_p). Floppy already does this for the fdc. That really only leaves the CMOS as a core logic item to tackle, and bits of parallel port handling in the chipset layers. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Abhishek Sagar authored
Highlight peculiar cases in singles-step kprobe handling. In reenter_kprobe(), a breakpoint in KPROBE_HIT_SS case can only occur when single-stepping a breakpoint on which a probe was installed. Since such probes are single-stepped inline, identifying these cases is unambiguous. All other cases leading up to KPROBE_HIT_SS are possible bugs. Identify and WARN_ON such cases. Signed-off-by:
Abhishek Sagar <sagar.abhishek@gmail.com> Signed-off-by:
-
Benjamin LaHaise authored
an otherwise idle system takes about 3 ticks per network interface in unregister_netdev() due to multiple calls to synchronize_rcu(), which adds up to quite a few seconds for tearing down thousands of interfaces. By flushing pending rcu callbacks in the idle loop, the system makes progress hundreds of times faster. If this is indeed a sane thing to, it probably needs to be done for other architectures than x86. And yes, the network stack shouldn't call synchronize_rcu() quite so much, but fixing that is a little more involved. Signed-off-by:
-
John Reiser authored
The ENDPROCs() were not used everywhere. Some code used just END() instead, while other code used nothing. um/sys-i386/checksum.S didn't #include <linux/linkage.h> . I also got confused because gcc puts the .type near the ENTRY, while ENDPROC puts it on the opposite end. Signed off by: John Reiser <jreiser@BitWagon.com> Signed-off-by:
-
Harvey Harrison authored
Add caller of is_errata93() to X86_32, ifdef'd to do nothing. Signed-off-by:
-
Harvey Harrison authored
Comments, indentation, printk format. Uses task_pid_nr() on X86_64 now, but this is always defined to task->pid. Signed-off-by:
-
Harvey Harrison authored
Copy the prefetch of map_sem from X86_64 and move the check notify_page_fault (soon to be kprobe_handle_fault) out of the unlikely if() statement. This makes the X86_32|64 pagefault handlers closer to each other. Signed-off-by:
-
Harvey Harrison authored
is_prefetch was the last user of get_segment_eip and only on X86_32. This function returned the faulting instruction's address and set the upper segment limit. Instead, use the convert_ip_to_linear helper and rely on probe_kernel_address to do the segment checks which was already done everywhere the segment limit was being checked on X86_32. Remove get_segment_eip as well. Signed-off-by:
-
Harvey Harrison authored
Rename convert_rip_to_linear to convert_ip_to_linear for shared X86_32|64 use. Signed-off-by:
-
Harvey Harrison authored
Where x86_32 passed zero in the high 32 bits, use wrmsrl which will zero extend for us. This allows ifdefs for 32/64 bit to be eliminated. Eliminate ifdef in step.c. Similar cleanup was done when unifying kprobes_32|64.c and wrmsr() was chosen there over wrmsrl(). This patch changes these to wrmsrl. Signed-off-by:
-
travis@sgi.com authored
Change static bios_cpu_apicid array to a per_cpu data variable. This includes using a static array used during initialization similar to the way x86_cpu_to_apicid[] is handled. There is one early use of bios_cpu_apicid in apic_is_clustered_box(). The other reference in cpu_present_to_apicid() is called after smp_set_apicids() has setup the percpu version of bios_cpu_apicid. [ mingo@elte.hu: build fix ] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
travis@sgi.com authored
Change the following static arrays sized by NR_CPUS to per_cpu data variables: acpi_cpufreq_data *drv_data[NR_CPUS] Signed-off-by:
-
travis@sgi.com authored
Change the following static arrays sized by NR_CPUS to per_cpu data variables: char cpu_to_node_map[NR_CPUS]; Signed-off-by:
-
travis@sgi.com authored
Clean up references to x86_cpu_to_apicid. Removes extraneous comments and standardizes on "x86_*_early_ptr" for the early kernel init references. Signed-off-by:
-
travis@sgi.com authored
Change the following static arrays sized by NR_CPUS to per_cpu data variables: i386_cpu cpu_devices[NR_CPUS]; (And change the struct name to x86_cpu.) Signed-off-by:
-
travis@sgi.com authored
Change the following static arrays sized by NR_CPUS to per_cpu data variables: task_struct *idle_thread_array[NR_CPUS]; This is only done if CONFIG_HOTPLUG_CPU is defined as otherwise, the array is removed after initialization anyways. Signed-off-by:
-
