- 29 Apr, 2019 14 commits
-
-
John Barberiz authored
Refactor dp vendor parsing int to a new function, and call it before get_active_converter_info(). Also, add a flag to skip parsing of Display ID 2.0. Some devices fail on readind DID2, but we shouldn't fail EDID read because of it. Add this flag to facilitate the logic. Signed-off-by:
John Barberiz <John.Barberiz@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Charlene Liu authored
Different HW will need to init HUBP differently. For now, add a vtable entry, and hook a NO-OP for DCN1. In addition, future HW will need to access the HUBPREQ_DEBUG register for hubp_init. Add it to the reg list. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Eric Yang authored
[Why] The new interface now replaces the old interface for all known configurations. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Thomas Lim authored
[Why] Due to the generic introduction of seamless boot, the display is no longer blanked upon boot. However, this causes corruption on some systems that does not lock the memory in the non-secure boot case, resulting in brief corruption on boot due to garbage being written into the frame buffer. [How] Add a flag, read during DC init, to determine whether display should be blanked on boot. Default to true. Signed-off-by:
Thomas Lim <Thomas.Lim@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Yongqiang Sun authored
* Replace certain register writes with register sets that overwrites the the entire register, instead of only a field within the register. * Add program_watermarks() entry to hubbub vtable. Hook it up to existing functions that program watermarks. * Add additional watermark registers. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] Many userspace applications (and IGT) seem to expect that most drivers can keep a CRTC active and enabled if there are no primary or overlay planes. DC is setup to handle this but only in the case where there are absolutely no planes on the CRTC - no primary, cursor, or overlay. [How] Add a check to reject commits that have cursor planes enabled and nothing else on CRTCs since we can't handle that. The new helper does_crtc_have_active_cursor is used for this. In atomic commit tail, we need to let DC know that there are zero planes enabled when doing stream updates to let it disable and blank pipes as appropriate. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
David Francis <David.Francis@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] When disabling all the pipes for a CRTC the page-flip interrupt also gets disabled on Raven. We can't re-enable the page-flip interrupt unless we give DC at least one active DC plane. We currently enable interrupts after the call to dc_commit_state since there's currently no valid sequence that should disable all the planes or re-enable planes for a CRTC without first going through dc_commit_state. If we were to allow for a CRTC to be enabled with no primary plane this would not be the case - the call to dc_commit_updates_for_stream would enable the planes when going from zero to at least one active plane, but manage_dm_interrupts would have been called too early. This results in a page-flip timeout on any subsequent commits since we think the page-flip are now enabled when they're actually disabled. We need to enable interrupts after the call to dc_commit_updates_for_stream. [How] Split enabling interrupts into two passes. One pass before dc_commit_updates_for_stream and one after it. Shifting all the interrupts to be strictly below the call doesn't currently work even though it should in theory. We end up queuing off the vblank event to be handle by the flip handler before it's actually enabled in some cases, particularly: old_crtc_state->active = false -> new_crtc_state->active = true The framebuffer states haven't changed and we can technically still do a "pageflip" in this case and send back the event. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] We only currently drop the vblank reference when the stream is being removed from the context. We should be dropping it whenever we disable interrupts and reaquiring it after we re-enable them. We also never get the extra reference correctly when re-enabling interrupts, since grabbing the reference has the following condition: if (!crtc_state->crc_enabled && enable) drm_crtc_vblank_get(crtc); This means that crc_enabled must be *false* in order to grab the extra reference. [How] Always drop the ref whenever we're disabling interrupts. Only disable CRC capture when the stream is being removed. Always grab the ref by setting dm_new_crtc_state->crc_enabled = false before the call to re-enable CRC capture. Signed-off-by: -
Nicholas Kazlauskas authored
[Why] We can't do cursor programming after the planes have been disabled since there won't be any pipes - leading to lock warnings and the wrong cursor state being left in the registers. When we re-enable the planes after the previous cursor state will also remain if we don't have a cursor plane. [How] If we're disabling the planes then do the cursor programming first. If we're not disabling the planes then do the cursor programming after. Introduce the amdgpu_dm_commit_cursors helper to avoid code duplication for both of these cases. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The vblank and pageflip interrupts should only be enabled for a CRTC that's enabled and has active planes. The current logic takes care of this, but isn't setup to handle the case where the active plane count goes to zero but the stream remains enabled. We currently block this case since we don't allow commits that enable a CRTC with no active planes, but shouldn't be any reason we can't support this from a hardware perspective and many userspace applications expect to be able to do it (like IGT). [How] The count_crtc_active_planes function fills in the number of "active_planes" on the dm_crtc_state. This should be the same as DC's plane_count on the stream_status but easier to access since we don't need to lock the private atomic state with the DC context. Add the "interrupts_enabled" flag to the dm_crtc_state and set it based on whether the stream exists and if there are active planes on the stream. Update the disable and enable logic to make use of this new flag. There shouldn't be any functional change (yet) with this patch. Signed-off-by:
-
Wentao Lou authored
amdgpu_sriov_vf would return 0x0 or 0x4 to indicate if sriov. but F32_POLL_ENABLE need 0x0 or 0x1 to determine if enabled. set 0x4 into F32_POLL_ENABLE would make SDMA0_GFX_RB_WPTR_POLL_CNTL not working. Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Reviewed-by:
-
Evan Quan authored
Update Vega20 sdma golden settings. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
hersen wu authored
[WHY] clock unit mis-match between caller DC and SMU interface. dc pass lock in mhz. the same unit as smu. no covert is needed. [HOW] remove covert_10k_to_mhz in smu interface this fixes corruption issue with 4k @60 display and stutter mode enable Reviewed-by:Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
hersen wu <hersenxs.wu@amd.com> Signed-off-by:
-
Colin Ian King authored
Currently an allocation is being made but the allocation failure check is being performed on another pointer. Fix this by checking the correct pointer. Also use the normal kernel idiom for null pointer checks. Addresses-Coverity: ("Resource leak") Fixes: 43e3ac83 ("drm/amd/display: Add function to copy DC streams") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 23 Apr, 2019 14 commits
-
-
Jun Lei authored
[why] When DMCU interrupts x86, it leads to undefined phy programming [how] expand dmcu interface to support new PHY lock and unlock commands if DMCU FW doesn't support these commands, they fail silently so its okay Signed-off-by:
-
Eric Bernstein authored
[Why] Starting with DCN1, the input_pixel_processor (ipp) struct has been replaced by dpp struct (part of DAL3.1 SW architecture change). Need to update logic to handle cases where ipp is never allocated. [How] Only skip cursor position programming if both ipp and dpp resources are NULL. Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
-
Anthony Koo authored
[Why] Power down of PHY on eDP requires us to call eDP power control to power on again [How] 1. In the case link rates don't match, disable PHY requires calling of eDP power control ON after 2. Link disable case limit to eDP path since this is not really applicable to DP since we do power down PHY as part of verify link cap 3. Move detection of eDP link settings to be done even for S4 resume cases where other dpcd cap read and edid read can be skipped Signed-off-by:
-
Anthony Koo authored
[Why] Some DMCU messages were being sent in cases where there was no DMCU FW at all, which resulted in some wait timeouts [How] Delay sending some of the DMCU messages after FW init is called and DMCU is running. Signed-off-by:
-
Wenjing Liu authored
We'll need the ability to copy a dc_stream_state for some features. Implement it here. Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
-
Anthony Koo authored
[Why] Workaround was missing in one HW disable path, meaning when all pipes are power gated, stutter was not working [How] Add workaround for init_hw path for stutter workaround Signed-off-by:
-
Leo Li authored
smu.ppt_funcs is only initialized for ASICs supporting SW SMU. On a Hawaii ASIC, attempting to access the udev attribute ATTRS{power_dpm_state} will cause a null pointer deref in amdgpu_get_dpm_state() because of this. Fix by checking if SW SMU is supported first. Signed-off-by:Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Leo Li authored
They will be used by DC when runing ASIC-specific HUBP initialization. Signed-off-by:
-
Andrey Grodzovsky authored
Patch '5edb0c9b Fix deadlock with display during hanged ring recovery' was accidentaly removed during one of DALs code merges. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Christian König authored
Don't block others while waiting for the fences to finish, concurrent submission is perfectly valid in this case and holding the lock can prevent killed applications from terminating. Signed-off-by:
Christian König <ckoenig.leichtzumerken@gmail.com> Reviewed-by:
-
Andrey Grodzovsky authored
It's normal for VRAM to lost during GPU reset and so change the log level to INFO to avoid confusing users. Signed-off-by:
-
Chengming Gui authored
enable UMDPSTATE support to force performance level for raven2. v2: squash in warning fix (Alex) Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
-
Chengming Gui authored
The power profile allows the user to adjust the power state heuristics for clock level transitions. v2: squash in warning fix (Alex) Reviewed-by:
-
- 19 Apr, 2019 10 commits
-
-
Colin Ian King authored
There is a spelling mistake in a pr_err message. Fix it. Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a DRM_INFO message. Fix it. Reviewed-by:
-
Likun Gao authored
Enable MGCG for picasso. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Yintian Tao authored
Under SRIOV, we need disable DRIVER_ATOMIC. Otherwise, it will trigger WARN_ON at drm_universal_plane_init. Signed-off-by:
Yintian Tao <yttao@amd.com> Acked-by:
-
wentalou authored
amdgpu_bo_destroy had a bug by calling amdgpu_bo_unref outside mutex_lock. If amdgpu_device_recover_vram executed between amdgpu_bo_unref and list_del_init, it would get NULL of shadow->parent, then caused Call Trace and GPU reset failed. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Leo Li authored
This is needed by DC to support EDID emulation on USB-C ports. CC: Samson Tam <Samson.Tam@amd.com> CC: Harry Wentland <harry.wentland@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Amber Lin authored
Method of getting firmware version is the same across ASICs, so remove them from ASIC-specific files and create one in amdgpu_amdkfd.c. This new created get_fw_version simply reads fw_version from adev->gfx than parsing the ucode header. Signed-off-by:
Amber Lin <Amber.Lin@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
shaoyunl authored
Send message with parameter to SMC to set xgmi pstate Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
DC and DM already support DRM_FORMAT_RGB565, it's just missing from the list of valid formats. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Evan Quan authored
PSP SOS firmware needs to be 0x80067 or later. Signed-off-by:
-
- 15 Apr, 2019 2 commits
-
-
Joshua Aberback authored
[Why] We used this change to investigate the performance of bandwidth validation, it will be useful to have if we need to investigate further. [How] We use performance counter tick numbers to profile performance, they live at dc->debug.bw_val_profile (set .enable in debugger to turn on measuring). Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
-
Joshua Aberback authored
Add a fast_validate parameter in dc_validate_global_state for future use Signed-off-by:
-
