An error occurred fetching the project authors.
- 21 Mar, 2014 3 commits
-
-
Filipe Manana authored
Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Filipe Manana authored
When locking file ranges in the inode's io_tree, cache the first extent state that belongs to the target range, so that when unlocking the range we don't need to search in the io_tree again, reducing cpu time and making and therefore holding the io_tree's lock for a shorter period. Signed-off-by:
-
Josef Bacik authored
Zach found this deadlock that would happen like this btrfs_end_transaction <- reduce trans->use_count to 0 btrfs_run_delayed_refs btrfs_cow_block find_free_extent btrfs_start_transaction <- increase trans->use_count to 1 allocate chunk btrfs_end_transaction <- decrease trans->use_count to 0 btrfs_run_delayed_refs lock tree block we are cowing above ^^ We need to only decrease trans->use_count if it is above 1, otherwise leave it alone. This will make nested trans be the only ones who decrease their added ref, and will let us get rid of the trans->use_count++ hack if we have to commit the transaction. Thanks, cc: stable@vger.kernel.org Reported-by:Zach Brown <zab@redhat.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Tested-by:
-
- 10 Mar, 2014 37 commits
-
-
Miao Xie authored
We didn't have a lock to protect the access to the delalloc inodes list, that is we might access a empty delalloc inodes list if someone start flushing delalloc inodes because the delalloc inodes were moved into a other list temporarily. Fix it by wrapping the access with a lock. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
When we create a snapshot, we just need wait the ordered extents in the source fs/file root, but because we use the global mutex to protect this ordered extents list of the source fs/file root to avoid accessing a empty list, if someone got the mutex to access the ordered extents list of the other fs/file root, we had to wait. This patch splits the above global mutex, now every fs/file root has its own mutex to protect its own list. Signed-off-by:
-
Miao Xie authored
We needn't flush all delalloc inodes when we doesn't get s_umount lock, or we would make the tasks wait for a long time. Signed-off-by:
-
Miao Xie authored
generic/074 in xfstests failed sometimes because of the enospc error, the reason of this problem is that we just reclaimed the space we need from the reserved space for delalloc, and then tried to reserve the space, but if some task did no-flush reservation between the above reclamation and reservation, Task1 Task2 shrink_delalloc() reclaim 1 block (The space that can be reserved now is 1 block) do no-flush reservation reserve 1 block (The space that can be reserved now is 0 block) reserving 1 block failed the reservation of Task1 failed, but in fact, there was enough space to reserve if we could reclaim more space before. Fix this problem by the aggressive reclamation of the reserved delalloc metadata space. Signed-off-by:
-
Miao Xie authored
The reason is: - The per-cpu counter has its own lock to protect itself. - Here we needn't get a exact value. Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Miao Xie authored
As the comment in the btrfs_direct_IO says, only the compressed pages need be flush again to make sure they are on the disk, but the common pages needn't, so we add a if statement to check if the inode has compressed pages or not, if no, skip the flush. And in order to prevent the write ranges from intersecting, we need wait for the running ordered extents. But the current code waits for them twice, one is done before the direct IO starts (in btrfs_wait_ordered_range()), the other is before we get the blocks, it is unnecessary. because we can do the direct IO without holding i_mutex, it means that the intersected ordered extents may happen during the direct IO, the first wait can not avoid this problem. So we use filemap_fdatawrite_range() instead of btrfs_wait_ordered_range() to remove the first wait. Signed-off-by:
-
Miao Xie authored
The tasks that wait for the IO_DONE flag just care about the io of the dirty pages, so it is better to wake up them immediately after all the pages are written, not the whole process of the io completes. Signed-off-by:
-
Miao Xie authored
btrfs_wait_ordered_roots() moves all the list entries to a new list, and then deals with them one by one. But if the other task invokes this function at that time, it would get a empty list. It makes the enospc error happens more early. Fix it. Signed-off-by:
-
Miao Xie authored
If the snapshot creation happened after the nocow write but before the dirty data flush, we would fail to flush the dirty data because of no space. So we must keep track of when those nocow write operations start and when they end, if there are nocow writers, the snapshot creators must wait. In order to implement this function, I introduce btrfs_{start, end}_nocow_write(), which is similar to mnt_{want,drop}_write(). These two functions are only used for nocow file write operations. Signed-off-by: -
Qu Wenruo authored
Add ftrace for btrfs_workqueue for further workqueue tunning. This patch needs to applied after the workqueue replace patchset. Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Qu Wenruo authored
The new btrfs_workqueue still use open-coded function defition, this patch will change them into btrfs_func_t type which is much the same as kernel workqueue. Signed-off-by:
-
Liu Bo authored
Btrfs send reads data from disk and then writes to a stream via pipe or a file via flush. Currently we're going to read each page a time, so every page results in a disk read, which is not friendly to disks, esp. HDD. Given that, the performance can be gained by adding readahead for those pages. Here is a quick test: $ btrfs subvolume create send $ xfs_io -f -c "pwrite 0 1G" send/foobar $ btrfs subvolume snap -r send ro $ time "btrfs send ro -f /dev/null" w/o w real 1m37.527s 0m9.097s user 0m0.122s 0m0.086s sys 0m53.191s 0m12.857s Signed-off-by:Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
This has no functional change, only picks out the same part of two functions, and makes it shared. Signed-off-by:
-
Filipe Manana authored
When we're finishing processing of an inode, if we're dealing with a directory inode that has a pending move/rename operation, we don't need to send a utimes update instruction to the send stream, as we'll do it later after doing the move/rename operation. Therefore we save some time here building paths and doing btree lookups. Signed-off-by:
-
Filipe Manana authored
When using prealloc extents, a file defragment operation may actually fragment the file and increase the amount of data space used by the file. This change fixes that behaviour. Example: $ mkfs.btrfs -f /dev/sdb3 $ mount /dev/sdb3 /mnt $ cd /mnt $ xfs_io -f -c 'falloc 0 1048576' foobar && sync $ xfs_io -c 'pwrite -S 0xff -b 100000 5000 100000' foobar $ xfs_io -c 'pwrite -S 0xac -b 100000 200000 100000' foobar $ xfs_io -c 'pwrite -S 0xe1 -b 100000 900000 100000' foobar && sync Before defragmenting the file: $ btrfs filesystem df /mnt Data, single: total=8.00MiB, used=1.25MiB System, DUP: total=8.00MiB, used=16.00KiB System, single: total=4.00MiB, used=0.00 Metadata, DUP: total=1.00GiB, used=112.00KiB Metadata, single: total=8.00MiB, used=0.00 $ btrfs-debug-tree /dev/sdb3 (...) item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 prealloc data disk byte 12845056 nr 1048576 prealloc data offset 0 nr 4096 item 7 key (257 EXTENT_DATA 4096) itemoff 15757 itemsize 53 extent data disk byte 12845056 nr 1048576 extent data offset 4096 nr 102400 ram 1048576 extent compression 0 item 8 key (257 EXTENT_DATA 106496) itemoff 15704 itemsize 53 prealloc data disk byte 12845056 nr 1048576 prealloc data offset 106496 nr 90112 item 9 key (257 EXTENT_DATA 196608) itemoff 15651 itemsize 53 extent data disk byte 12845056 nr 1048576 extent data offset 196608 nr 106496 ram 1048576 extent compression 0 item 10 key (257 EXTENT_DATA 303104) itemoff 15598 itemsize 53 prealloc data disk byte 12845056 nr 1048576 prealloc data offset 303104 nr 593920 item 11 key (257 EXTENT_DATA 897024) itemoff 15545 itemsize 53 extent data disk byte 12845056 nr 1048576 extent data offset 897024 nr 106496 ram 1048576 extent compression 0 item 12 key (257 EXTENT_DATA 1003520) itemoff 15492 itemsize 53 prealloc data disk byte 12845056 nr 1048576 prealloc data offset 1003520 nr 45056 (...) Now defragmenting the file results in more data space used than before: $ btrfs filesystem defragment -f foobar && sync $ btrfs filesystem df /mnt Data, single: total=8.00MiB, used=1.55MiB System, DUP: total=8.00MiB, used=16.00KiB System, single: total=4.00MiB, used=0.00 Metadata, DUP: total=1.00GiB, used=112.00KiB Metadata, single: total=8.00MiB, used=0.00 And the corresponding file extent items are now no longer perfectly sequential as before, and we're now needlessly using more space from data block groups: $ btrfs-debug-tree /dev/sdb3 (...) item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 extent data disk byte 12845056 nr 1048576 extent data offset 0 nr 4096 ram 1048576 extent compression 0 item 7 key (257 EXTENT_DATA 4096) itemoff 15757 itemsize 53 extent data disk byte 13893632 nr 102400 extent data offset 0 nr 102400 ram 102400 extent compression 0 item 8 key (257 EXTENT_DATA 106496) itemoff 15704 itemsize 53 extent data disk byte 12845056 nr 1048576 extent data offset 106496 nr 90112 ram 1048576 extent compression 0 item 9 key (257 EXTENT_DATA 196608) itemoff 15651 itemsize 53 extent data disk byte 13996032 nr 106496 extent data offset 0 nr 106496 ram 106496 extent compression 0 item 10 key (257 EXTENT_DATA 303104) itemoff 15598 itemsize 53 prealloc data disk byte 12845056 nr 1048576 prealloc data offset 303104 nr 593920 item 11 key (257 EXTENT_DATA 897024) itemoff 15545 itemsize 53 extent data disk byte 14102528 nr 106496 extent data offset 0 nr 106496 ram 106496 extent compression 0 item 12 key (257 EXTENT_DATA 1003520) itemoff 15492 itemsize 53 extent data disk byte 12845056 nr 1048576 extent data offset 1003520 nr 45056 ram 1048576 extent compression 0 (...) With this change, the above example will no longer cause allocation of new data space nor change the sequentiality of the file extents, that is, defragment will be effectless, leaving all extent items pointing to the extent starting at disk byte 12845056. In a 20Gb filesystem I had, mounted with the autodefrag option and 20 files of 400Mb each, initially consisting of a single prealloc extent of 400Mb, having random writes happening at a low rate, lead to a total of over ~17Gb of data space used, not far from eventually reaching an ENOSPC state. Signed-off-by:
-
Filipe Manana authored
When the defrag flag BTRFS_DEFRAG_RANGE_START_IO is set and compression enabled, we weren't flushing completely, as writing compressed extents is a 2 steps process, one to compress the data and another one to write the compressed data to disk. Signed-off-by:
-
Qu Wenruo authored
Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by:
-
Qu Wenruo authored
Since all the btrfs_worker is replaced with the newly created btrfs_workqueue, the old codes can be easily remove. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->scrub_* with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->qgroup_rescan_worker with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->delayed_workers with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->fixup_workers with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->readahead_workers with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->cache_workers with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->rmw_workers with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->endio_* workqueues with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Replace the fs_info->submit_workers with the newly created btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Much like the fs_info->workers, replace the fs_info->submit_workers use the same btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Much like the fs_info->workers, replace the fs_info->delalloc_workers use the same btrfs_workqueue. Signed-off-by:
-
Qu Wenruo authored
Use the newly created btrfs_workqueue_struct to replace the original fs_info->workers Signed-off-by:
-
Qu Wenruo authored
The original btrfs_workers has thresholding functions to dynamically create or destroy kthreads. Though there is no such function in kernel workqueue because the worker is not created manually, we can still use the workqueue_set_max_active to simulated the behavior, mainly to achieve a better HDD performance by setting a high threshold on submit_workers. (Sadly, no resource can be saved) So in this patch, extra workqueue pending counters are introduced to dynamically change the max active of each btrfs_workqueue_struct, hoping to restore the behavior of the original thresholding function. Also, workqueue_set_max_active use a mutex to protect workqueue_struct, which is not meant to be called too frequently, so a new interval mechanism is applied, that will only call workqueue_set_max_active after a count of work is queued. Hoping to balance both the random and sequence performance on HDD. Signed-off-by:
-
Qu Wenruo authored
Add high priority function to btrfs_workqueue. This is implemented by embedding a btrfs_workqueue into a btrfs_workqueue and use some helper functions to differ the normal priority wq and high priority wq. So the high priority wq is completely independent from the normal workqueue. Signed-off-by:
-
Qu Wenruo authored
Use kernel workqueue to implement a new btrfs_workqueue_struct, which has the ordering execution feature like the btrfs_worker. The func is executed in a concurrency way, and the ordred_func/ordered_free is executed in the sequence them are queued after the corresponding func is done. The new btrfs_workqueue works much like the original one, one workqueue for normal work and a list for ordered work. When a work is queued, ordered work will be added to the list and helper function will be queued into the workqueue. The helper function will execute a normal work and then check and execute as many ordered work as possible in the sequence they were queued. At this patch, high priority work queue or thresholding is not added yet. The high priority feature and thresholding will be added in the following patches. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by:
-
Qu Wenruo authored
The struct async_sched is not used by any codes and can be removed. Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Tested-by:
-
Liu Bo authored
It is really unnecessary to search tree again for @gen, @mode and @rdev in the case of REG inodes' creation, as we've got btrfs_inode_item in sctx, and @gen, @mode and @rdev can easily be fetched. Signed-off-by:
-
Miao Xie authored
We can not release the reserved metadata space for the first write if we find the write position is pre-allocated. Because the kernel might write the data on the disk before we do the second write but after the can-nocow check, if we release the space for the first write, we might fail to update the metadata because of no space. Fix this problem by end nocow write if there is dirty data in the range whose space is pre-allocated. Signed-off-by:
-
