- 12 Jul, 2007 40 commits
-
-
Alan Stern authored
This patch (as918) introduces a new USB driver method: reset_resume. It is called when a device needs to be reset as part of a resume procedure (whether because of a device quirk or because of the USB-Persist facility), thereby taking over a role formerly assigned to the post_reset method. As a consequence, post_reset no longer needs an argument indicating whether it is being called as part of a reset-resume. This separation of functions makes the code clearer. In addition, the pre_reset and post_reset method return types are changed; they now must return an error code. The return value is unused at present, but at some later time we may unbind drivers and re-probe if they encounter an error during reset handling. The existing pre_reset and post_reset methods in the usbhid, usb-storage, and hub drivers are updated to match the new requirements. For usbhid the post_reset routine is also used for reset_resume (duplicate method pointers); for the other drivers a new reset_resume routine is added. The change to hub.c looks bigger than it really is, because mark_children_for_reset_resume() gets moved down next to the new hub_reset_resume() routine. A minor change to usb-storage makes the usb_stor_report_bus_reset() routine acquire the host lock instead of requiring the caller to hold it already. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as917) removes a now-unnecessary level of subroutine nesting from hub.c. Since usb_port_suspend() does nothing but call hub_port_suspend(), and usb_port_resume() does nothing but call hub_port_resume(), there's no reason to keep the routines separate. Also included in the patch are a few cosmetic changes involving whitespace and use of braces. Signed-off-by:
-
Alan Stern authored
This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: -
Alan Stern authored
This patch (as915b) combines the public routine usb_port_suspend() and the private routine __usb_port_suspend() into a single function. By removing the explicit mention of otg_port in the call to __usb_port_suspend(), we prevent a possible error in which the system tries to perform HNP on the wrong port when a non-targeted device is plugged into a non-OTG port. Signed-off-by:
-
Michael Hanselmann authored
This patch fixes a silicon bug in some NEC OHCI chips. The bug appears at random times and is very, very difficult to reproduce. Without the following patch, Linux would shut the chip and its associated devices down. In Apple PowerBooks this leads to an unusable keyboard and mouse (SSH still working). The idea of restarting the chip is taken from public Darwin code. Signed-off-by:
Michael Hanselmann <linux-kernel@hansmi.ch> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Tony Lindgren authored
Disable file_storage USB_CONFIG_ATT_WAKEUP as it requires user interaction during Chapter 9 tests. Signed-off-by: Tony Lindgren <tony@atomide.com Signed-off-by:
Felipe Balbi <felipe.lima@indt.org.br> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Vladimir Barinov authored
This patch fixes the endianness select for transfer buffers in EHCI controllers that have Transaction Translator built in the hub. Also I cleaned it up to make rid of magic numbers. Signed-off-by:
Vladimir Barinov <vbarinov@ru.mvista.com> Cc: <david-b@pacbell.net> Signed-off-by:
-
Al Borchers authored
Some further cleanup after Oliver's patch to update the tty buffering. The input buffer is not used at all anymore, so I removed it. Signed-off-by:
Al Borchers <alborchers@steinerpoint.com> Signed-off-by:
-
Oliver Neukum authored
this is an update of the whiteheat driver. It fixes: - switch from spinlocks to mutexes to prevent sleeping with a spinlock held - locking to stop races with disconnect - error handling for commands that time out Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
This patch set introduces usb_anchor and uses it to implement all modern APIs in the skeleton driver. - proper error reporting in the skeleton driver - implementation of flush() Signed-off-by:
-
Oliver Neukum authored
- introduction of usb_anchor and its methods Signed-off-by:
-
Vikram Pandita authored
Patch is to prevent the OTG host of doing 3 times enumeration of device when the Host suspends for HNP. The error code used in this case is ENOTSUPP. Signed-off-by:
Vikram Pandita <vikram.pandita@ti.com> Acked-by:
-
David Brownell authored
Fix a few serial gadget issues reported by the latest "sparse": some functions should have been defined as static, not just declared that way. Signed-off-by:
-
t.sefzick authored
in order to be able to switch back to 'flow-control none' after having activated 'flow-control rts/cts', I made a small change to 'pl2303.c'. Signed-off-by: -
Oliver Neukum authored
the generic driver also had its own buffering. Signed-off-by: Oliver Neukum <oneukum@suse.de_ Signed-off-by: -
Oliver Neukum authored
this fixes the flushing trouble due to its own buffering for this driver. Signed-off-by:
-
Oliver Neukum authored
the new tty buffering code allows usb drivers to stop private buffering. In fact we must do so to allow flushing to work correctly. This does so for the visor driver. Signed-off-by:
-
David Brownell authored
Make sure gadgetfs userspace interface is properly exported: - Move <linux/usb_gadgetfs.h> to <linux/usb/gadgetfs.h>; - Export it using Kbuild; - Add an #include guard; - Correct some internal documentation; - Update struct layout so it's the same on 32/64 bit kernels. Signed-off-by:
-
David Rientjes authored
Substitute USB instances of __attribute__ ((unused)) functions with the newly introduced __maybe_unused. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Li Yang authored
For MPC831x support, change the ehci-fsl driver to preserve bits set in platform code. Add a common CONFIG_USB_EHCI_FSL to indicate presence of Freescale EHCI SOC. Add FSL_USB2_DR_OTG operating mode support, thus both host and device can work for the mini-ab receptacle. Note: this doesn't enable OTG protocol support. Signed-off-by:
Li Yang <leoli@freescale.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Stefan Roese authored
Now select the big-endian configuration options CONFIG_USB_EHCI_BIG_ENDIAN_MMIO and CONFIG_USB_EHCI_BIG_ENDIAN_DESC in the usb host Kconfig file and not in the platform Kconfig files. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
-
Stefan Roese authored
This patch adds support for the AMCC 440EPx EHCI controller whose in-memory data structures and the registers are represented in big- endian format. Signed-off-by:
-
Stepan Moskovchenko authored
The new FT232RL allows setting and getting the value of the latency timer, like on the FT232BM. However, the driver will not create the sysfs entries for the RL without this one-line patch. I have tested it on two systems with successful results. From: Stepan Moskovchenko <stevenm86@gmail.com> Signed-off-by: -
Alan Stern authored
This patch (as911) replaces some C++-style commented-out debugging lines in driver.c with a new "verbose debugging" macro. It makes the code look cleaner, and it's easier to turn the debugging on or off. Signed-off-by:
-
Alan Stern authored
This patch (as908) adds central protection in usbcore for the prototypical race between opening and unregistering a char device. The spinlock used to protect the minor-numbers array is replaced with an rwsem, which can remain locked across a call to a driver's open() method. This guarantees that open() and deregister() will be mutually exclusive. The private locks currently used in several individual drivers for this purpose are no longer necessary, and the patch removes them. The following USB drivers are affected: usblcd, idmouse, auerswald, legousbtower, sisusbvga/sisusb, ldusb, adutux, iowarrior, and usb-skeleton. As a side effect of this change, usb_deregister_dev() must not be called while holding a lock that is acquired by open(). Unfortunately a number of drivers do this, but luckily the solution is simple: call usb_deregister_dev() before acquiring the lock. In addition to these changes (and their consequent code simplifications), the patch fixes a use-after-free bug in adutux and a race between open() and release() in iowarrior. Signed-off-by:
-
Mark Lord authored
Okay, found it. The root cause here was a missing CONFIG_USB_SUSPEND=y, which means the hci_usb device never got marked as USB_STATE_SUSPENDED, which then caused the loop to go on forever. The system works fine now with CONFIG_USB_SUSPEND=y in the .config. Here's the patch to prevent future lockups for this or other causes. I no longer need it, but it does still seem a good idea. Signed-off-by:
Mark Lord <mlord@pobox.com> Signed-off-by:
-
Daniel Drake authored
Recently, the USB device matching code stopped matching generic interface matches against devices with vendor-specific device class values. Some drivers now need to explicitly match USB device ID's (in addition to generic interface info) to retain the same behaviour as before. This new macro, suggested by Alan Stern, makes the explicit device/interface matching a little simpler for those users. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
David Brownell authored
Remove some dead CONFIG_ symbols, and document the status of a few others. The "gadget_chips.h" references are by and large to drivers which exist but haven't yet been submitted for merging to the main 2.6 tree. Signed-off-by:
-
Dave Platt authored
Improvements and fixes to the MCT U232 USB/serial interface driver. Implement RTS/CTS hardware flow control. Implement HUPCL. Bring handling of DTR and RTS into conformance with other Linux serial port drivers - assert both signals when opening device, even if "crtscts" is not currently selected. Signed-off-by:
Dave Platt <dplatt@radagast.org> Signed-off-by:
-
Arjan van de Ven authored
This patch modifies the USB regular 250ms timer to be "perfectly aligned" to the second and quarters thereof. This change is there to make sure that if you have multiple USB ports, the timers for all these ports will fire at the same time rather than all spread out. All spread out wakes the CPU up from power saving idle a lot more than needed... Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Martin K. Petersen authored
This patch adds support for the most recent Digi EdgePort USB serial devices. Signed-off-by:
Martin K. Petersen <mkp@mkp.net> Signed-off-by:
Mike Swift <mikes@digi.com> Signed-off-by:
Jeremy McBane <jmcbane@digi.com> Signed-off-by:
-
Alan Stern authored
This patch (as898) changes the port reset code in the hub driver. If a connect change occurs, it is reported the same way as a disconnect (which of course is what it really is). It also changes usb_reset_device(), to prevent the routine from futilely retrying the reset after a disconnect has occurred. Signed-off-by:
-
Alan Stern authored
This patch (as895) fixes up a loose end in the port-handover code for the USB-Persist facility. A special case occurs when a high-speed device is attached to a port which the user has designated to run at full-speed only; the port must be disabled before the handover can take place. Signed-off-by:
-
Alan Stern authored
This patch (as888) adds a new USB device quirk for devices which are unable to resume correctly. By using the new code added for the USB-persist facility, it is a simple matter to reset these devices instead of resuming them. To get things kicked off, a quirk entry is added for the Philips PSC805. Signed-off-by:
-
Alan Stern authored
This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss of VBUS power during suspend. In order for the USB-persist facility to work correctly, it is necessary for low- and full-speed devices attached to a high-speed port to be handed back to the companion controller during resume processing. This entails three changes: adding code to ehci-hcd to perform the handover, removing code from ohci-hcd to turn off ports during root-hub reinit, and adding code to ohci-hcd to turn on ports during PCI controller resume. (Other bus glue resume methods for platforms supporting high-speed controllers would need a similar change, if any existed.) Signed-off-by:
-
Alan Stern authored
This patch (as886) adds the controversial USB-persist facility, allowing USB devices to persist across a power loss during system suspend. The facility is controlled by a new Kconfig option (with appropriate warnings about the potential dangers); when the option is off the behavior will remain the same as it is now. But when the option is on, people will be able to use suspend-to-disk and keep their USB filesystems intact -- something particularly valuable for small machines where the root filesystem is on a USB device! Signed-off-by:
-
Pete Zaitcev authored
Add a class which allows for an easier integration with udev. This code was originally written by Paolo Abeni, and arrived to my tree as a part of big patch to add binary API on December 18. As I understand, Paolo always meant the class to be a part of the whole thing. This is his udev rule to go along with the patch: KERNEL=="usbmon[0-9]*", NAME="usbmon%n", MODE="0440",OWNER="root",GROUP="bin" Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Kees Lemmens authored
Last week I've been searching for a driver for the CA-42 cable (see usb below) that fitted my kernel 2.6.20. I only found an abandoned version for a driver on your website that indeed worked on 2.6.18 but wouldn't even compile with a more recent 2.6.20 kernel. I fiddled 2 evenings with the kernel code and have patched it up now to work with the modifications in the 2.6.20 kernel. The patch is attached hereafter and it works fine (at least for me :-) ). Bus 2 Device 13: ID 0ea0:6858 Ours Technology, Inc. I had to fiddle a little with the settings in .gnokiirc but that also occurred with the older 2.6.18 kernel. Nevertheless, on one system with this cable and my Nokia 6070 I had best results with : model = 6510 connection = dku5 while on an other system with the same kernel, cable and phone it only worked with : model = AT connection = serial serial_write_usleep = 1 From: Kees Lemmens <C.W.J.Lemmens@ewi.tudelft.nl> Cc: <pawel.kot@gmail.com> Cc: <bozo@andrews.hu> Signed-off-by: -
David Brownell authored
Remove atomic operations on the reference counter for EHCI queue heads. On various platforms (including ppc7448), atomic operations are unusable with dma-coherent memory. Signed-off-by:
Steven J. Hill <sjhill1@rockwellcollins.com> Signed-off-by:
-
Jan Engelhardt authored
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
