- 25 Nov, 2015 31 commits
-
-
Johan Hovold authored
Add helper function to release cport-descriptors with a given bundle id. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Remove conditional enabling of connections when binding protocols that served no purpose as a connection either has no bundle or it has an interface with a valid device id. Also remove the now unused GB_PROTOCOL_NO_BUNDLE protocol flag. This is an intermediate step in moving the protocol binding to connection_init, but is also needed as the control bundle is going away. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
The control bundle is going away so update the code. Also remove defensive WARN_ON which would not just warn if our implementation is broken, but also leak further memory unnecessarily. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
The svc connection helper functions should not assume that all dynamic connections will have a bundle. This is needed as the control bundle is going away. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Remove the now unused endo and module code. Note that the never-implemented serial and version attributes of the endo can be implemented as svc attributes if needed. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Replace reference to "endo0" and generate the raw-latency filename based on the host-device bus id instead. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Use dev_err and friends with the svc device for messages. Clean up error messages. Demote a few warnings to warning level. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Create the svc connection when registering the host-device and remove the current svc connection hacks that "upgraded" the svc connection once the endo id and ap interface id was known. Note that the old implementation was partly based on a misunderstanding as it was the remote interface id, rather than the local AP interface id, that used to define a connection (but we also needed the endo_id). The remote interface is no longer needed as static connections, such as the svc connection, are now simply defined by the host-device and host cport id. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Use host-device device and connection name for log messages, as not all connections have a bundle. Note that the "initial" svc connection has never had a bundle. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Use the host-device device and connection name for error messages, as the operation code can not assume that a connection has a bundle. Note that the "initial" svc connection has never had a bundle. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Use host-device device and connection name for log messages rather than assume that all connections have a bundle (e.g. not true for static connections). Note that the "initial" svc connection has never had a bundle. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Add a name field to connections that can be used in log messages. A connection always belongs to a host-device (bus) and can be uniquely identified by its host-device cport id, but include remote interface and cport id nonetheless on the following format: <hd_cport_id>/<intf_id>:<cport_id> The remote interface and cport id will be zero for static connections. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Add helper to determine whether a connection is static, and remove the protocol flag GB_PROTOCOL_SKIP_SVC_CONNECTION. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Make sure that the interface lookup helper can handle static, bundle-less connections without oopsing when creating further connections. Note that the initial svc-connection has always been bundle-less, but did not trigger an oops as a bundle was created for it before further connections were created. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Clean up the connection-creation interface by clearly separating our two types of connections: static and dynamic. Add two convenience functions for creating static and dynamic connections. A static connection is a pre-setup connection that is defined by a host device and a host-device cport id. Specifically, the remote interface or cport id need not be known. The SVC connection is a static connection. A dynamic connection is defined by a host device and a remote interface and cport id. This is our normal connections where the host-device cport is (generally) allocated dynamically. Note that the new generic interface is marked static, but can be exported later to allow dynamic connections to be created also from fixed host-device cports (e.g. for CSI). Also note that a connection of either type is uniquely identified by its host-device and host-device cport id once created. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Kill gb_create_bundle_connection, which was only used to create the control bundle and connection, and replace it with a specialised static helper. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Move endo_id and AP interface id to the svc device. The endo abstraction is about to be removed, and these attributes are arguable attributes of the svc anyway. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Register the svc device upon reception of the HELLO request. The SVC HELLO request contains the endo id and AP interface id, which will be exposed from the svc device rather than the endo. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Make sure to initialise the svc device fully before adding it to the host device. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Make the svc object a child device of the host-device device and use driver core to manage its lifetime. The svc device name is "<bus_id>-svc", where bus_id is the dynamically assigned id of the host device. Note that there is exactly one svc-device per host device (bus). Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Rename bundle devices so that the new device names become "<bus_id>-<intf_id>.<bundle_id>", where bus_id is the dynamically allocated host-device bus id and intf_id the svc-allocated interface id. Using a period (.) rather than a colon (:) makes dev-messages easier to read as as those already add a colon after the device name, for example: greybus 1-4.15: failed to connect cport: -22 Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Make interfaces child devices of host devices. The new interface device name is "<bus_id>-<intf_id>", where bus_id is the dynamically allocated bus id for the host device and intf_id is the svc-allocated interface id. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
The parent parameter was only used for debug messages and to name the connection workqueue. Use the host-device device for this instead. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Make the host device a proper device in the kernel device model. Host devices will be our new greybus-bus root devices. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Add a bundle_id attribute for the interface-unique id of a bundle that user space can use for matching. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Use hexadecimal notation for class-attribute value. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Rename the bundle class-attribute "bundle_class" for consistency reasons and to make it self documenting. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Add interface_id attribute that user space needs to identify an interface. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
The interface device_id attribute is an implementation detail that does not need to be exported to user space. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Rename vendor and product attributes vendor_id and product_id. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Update the ABI documentation to match the new device model. Note that the SVC unique_id and version attributes are not yet implemented. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
- 24 Nov, 2015 5 commits
-
-
Johan Hovold authored
Update the example sysfs-tree layout under Documentation. The new layout reflects changes to the kernel device-model that are needed to eventually be able to handle multiple AP-bridges. The example tree has two AP-bridges, each with its own view of the UniPro network, the bus. . ├── greybus1 │ ├── 1-2 │ │ ├── 1-2.1 │ │ │ ├── class │ │ │ ├── id │ │ │ └── state │ │ ├── 1-2.2 │ │ │ ├── class │ │ │ ├── id │ │ │ └── state │ │ ├── id │ │ ├── product_id │ │ ├── unique_id │ │ └── vendor_id │ ├── 1-4 │ │ ├── 1-4.2 │ │ │ ├── class │ │ │ ├── gpbridge0 │ │ │ │ ├── gpio │ │ │ │ │ └── gpiochip490 │ │ │ │ └── i2c-4 │ │ │ ├── id │ │ │ └── state │ │ ├── id │ │ ├── product_id │ │ ├── unique_id │ │ └── vendor_id │ └── 1-svc │ ├── ap_intf_id │ ├── eject │ ├── endo_id │ └── unique_id └── greybus2 ├── 2-3 │ ├── 2-3.1 │ │ ├── class │ │ ├── id │ │ └── state │ ├── id │ ├── product_id │ ├── unique_id │ └── vendor_id └── 2-svc ├── ap_intf_id ├── eject ├── endo_id └── unique_id Every bus has exactly one svc device (1-svc and 2-svc). For our system, the svc device of each bus will be a representation of the same network-unique SVC device (e.g. endo_id and unique_id will be identical). The first bus has two registered interfaces (1-2 and 1-4), while the second bus has a single interface (2-3). Note that the interface ids (2, 4, and 3) are necessarily unique as these are interfaces on the same network. Interface 1-2 has two bundles (1-2.1 and 1-2.2) and interface 1-4 has a single bundle (1-4.2). The bundle ids are interface-unique and reflect the ids found in each manifest. In the example, bundle 1-4.2 has a gbbridge-device, which is the parent device for a gpiochip device and an i2c bus. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Sachin Pandhare authored
This patch doesn't change any functionality. It just improves the readability of the code. Current code to get 'descriptors' pointer looks as if we are forcing the pointer type change. To simplify the address calculations, use 'descriptors' member directly from greybus_manifest structure. Signed-off-by: Sachin Pandhare <sachin.pandhare@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Fix off-by-one error when checking the number of cports a host-device supports. The CPORT_ID_MAX is the largest valid cport id so the maximum number of cports a host-device can use is CPORT_ID_MAX + 1. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Fix cport-id allocation that failed to include the highest port id in the available cport-id range. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Vaibhav Agarwal authored
This patch adds gb-codec driver with static information for DAPM widgets, controls & dapm_routes. Including some changes in kernel code(machine driver): - Able to register codec and glue it with existing sound card successfully. - Able to view & modify mixer controls: (volume/mute[left/right][input/output]) - Able to view DAPM widgets registered via /debug interface. - Able to establish DAPM path for playback. Since, FE<->BE path not yet verified with default jetson build, registering GB DAI as normal DAI link to verify GB virtual codec specific DAPM path. Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org> Reviewed-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
- 22 Nov, 2015 4 commits
-
-
Johan Hovold authored
Add matching macro for bundle class. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Move id-matching back to core and the bus code where it belongs. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Fix vendor and product matching by matching on the 32-bit Ara vendor and product ids. Remove the "fake" 16-bit vendor and product ids and export the Ara ids using the "vendor" and "product" interface attributes instead. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Remove the unimplemented interface unique-id. There will eventually be an interface-serial-number attribute provided, but let's not export it or commit to a name for this attribute until we need it. Signed-off-by: Johan Hovold <johan@hovoldconsulting.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-