- 11 Jun, 2015 9 commits
-
-
Raghu Vatsavayi authored
Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-09 This series contains updates to ixgbe only. The series adds additional support for x550 support, such as WoL and auto-negotiation of flow control. Adds new PHY support (external PHY) for x550, as well as the new methods/functions needed to support the new PHY's. Fixed a bug found in code inspection, where a check was missed when clearing counters for x550. Also fixed the init code flow for copper x550 devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== Add cim_ma_la, cim_pif_la and tx_rate debugfs entry This patch series adds the following. Add debugfs entry to dump CIM MA logic analyzer and CIM PIF logic analyzer logs. Also adds support to dump tx rate of the channels in the adapter This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Slaby authored
EXTRA_CFLAGS should be used on the command line only. Since EXTRA_CFLAGS here add only a non-existant path to compiler include paths (by -I), remove EXTRA_CFLAGS completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Before this patch the user-specified bridge port was ignored when deleting an fdb entry and thus one could delete an entry that belonged to any port. Example (eth0 and eth1 are br0 ports): bridge fdb add 00:11:22:33:44:55 dev eth0 master bridge fdb del 00:11:22:33:44:55 dev eth1 master (succeeds) after the patch: bridge fdb add 00:11:22:33:44:55 dev eth0 master bridge fdb del 00:11:22:33:44:55 dev eth1 master RTNETLINK answers: No such file or directory Based on a patch by Wilson Kok. Reported-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.2-20150609' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-05-06 this is a pull request of a two patches for net-next. The first patch is by Tomas Krcka, he fixes the (currently unused) register address for acceptance filters. Oliver Hartkopp contributes a patch for the cangw, where an optional UID is added to reference routing jobs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Jun, 2015 19 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Included changes: - use common Jenkins hash instead of private implementation - extend internal routing API - properly re-arrange header files inclusion - clarify precedence between '&' and '?' - remove unused ethhdr variable in batadv_gw_dhcp_recipient_get() - ensure per-VLAN structs are updated upon MAC change ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
This patch corrects a bug in ixgbe_setup_ixfi_x550em where we were reading and modifying IXGBE_KRM_LINK_CTRL_1 but forgot to write the results back. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
Even though X550 may later clear this value for certain devices set it initially to support copper. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
We need to call the set_lan_id before accessing I2C and this wasn't being done so this patch corrects that. Likewise we do the same for QSFP just to be consistent. In the X550 case this is even more important as with out it the mux is not controlled properly. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch adds ixgbe_check_link_t_X550em for checking copper PHY link. We check that both the MAC and external PHY have link. This is to avoid a false link up between the internal and external PHY when the external PHY doesn't have link. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch adds support for another 10baseT X550 device. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
A subset of the X550 function pointers didn't have default methods. This didn't cause any issue with previous X550 devices as they were all redefined. However future devices will need these default values. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
Reviewing the X550 copper init flow with the Si team resulted in a new simplified flow. We no longer wait for the PHY FW initialization complete bit to be set as this bit is only set once by the PHY at power on and then cleared on the first read. So only the first instance of running SW (or possibly MAC FW) needs to initialize the PHY. The PHY initialization has been simplified and now only requires that the PHY FW be un-stalled low-power mode or enabled the transceiver Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This check was missed in when this new MAC type was added. Since these counts can be incremented for X550 we need to clear them. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
Add checks for systems that don't have SFP's to avoid incorrectly acting on interrupts that are falsely interpreted as SFP events. We do this by updating the ixgbe_is_sfp to be aware of the new X550 devices. This also includes a modified check generating the EICR mask to be more forward-looking. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch adds support for receiving interrupts from a external copper PHY for the X550 part. This includes enabling, detection as well as re-enablement. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
The over heat message is displayed for multiple reasons but the text is cut-n-pasted for each of these cases. This patch pulls the text from the same location. I noticed this as I am about to add another case. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch adds a PHY reset function ixgbe_reset_phy_t_X550em. Which allows devices that have LASI support in enable their interrupt. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch adds x550 external PHY interrupt and forced 1G/10G support. This included enabling and handling LSC and thermal sensor interrupt. ixgbe_handle_lasi() has been added for handling the interrupts received over SDP0 from the external 10baseT PHY. ixgbe_enable_lasi_ext_t_x550em and ixgbe_get_lasi_ext_t_x550em have been added to X550em to enable mask and check interrupt flags for the external PHY. Forced 1G/10G link speed is handled via ixgbe_mac_link_t_X550em. ixgbe_seupt_mac_link_t_X550em sets up the internal PHY and external PHY to either iXFI (10G) or KX (1G) based on the user selected auto advertised link speed setting. Then sets up the external PHY auto advertised link speed. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
The I2C mux control relies on the SDP setting in the ESDP register so it is necessary to restore the value after a MAC reset. Combine all this functionality in to a support function. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This new method will control the PHY power state. You pass in the state you wish to change to (ether on or off). For cases where this method is not used the current PHY power state behavior is maintained. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
Add a define for the new PHY identification as well as it's mapping to the correct PHY type. Also allow ethtool to identify this type as well. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
These Device ID could support both WoL and autoneg flow control. In the case of WoL this is indicated by the eeprom. This patch enables these devices this support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
Some of the register addresses and format where unfortunately changed between MAC types. To get around this we add a const u32 *mvals pointer to the ixgbe_hw struct to point to an array of mac-type-dependent values. These can include register offsets, masks, whatever can be in a u32. When the ixgbe_hw struct is initialized, a pointer to the appropriate array must be set. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 Jun, 2015 5 commits
-
-
Michael Holzheu authored
bpf_tail_call() arguments: - ctx......: Context pointer - jmp_table: One of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table - index....: Index in the jump table In this implementation s390x JIT does stack unwinding and jumps into the callee program prologue. Caller and callee use the same stack. With this patch a tail call generates the following code on s390x: if (index >= array->map.max_entries) goto out 000003ff8001c7e4: e31030100016 llgf %r1,16(%r3) 000003ff8001c7ea: ec41001fa065 clgrj %r4,%r1,10,3ff8001c828 if (tail_call_cnt++ > MAX_TAIL_CALL_CNT) goto out; 000003ff8001c7f0: a7080001 lhi %r0,1 000003ff8001c7f4: eb10f25000fa laal %r1,%r0,592(%r15) 000003ff8001c7fa: ec120017207f clij %r1,32,2,3ff8001c828 prog = array->prog[index]; if (prog == NULL) goto out; 000003ff8001c800: eb140003000d sllg %r1,%r4,3 000003ff8001c806: e31310800004 lg %r1,128(%r3,%r1) 000003ff8001c80c: ec18000e007d clgij %r1,0,8,3ff8001c828 Restore registers before calling function 000003ff8001c812: eb68f2980004 lmg %r6,%r8,664(%r15) 000003ff8001c818: ebbff2c00004 lmg %r11,%r15,704(%r15) goto *(prog->bpf_func + tail_call_start); 000003ff8001c81e: e31100200004 lg %r1,32(%r1,%r0) 000003ff8001c824: 47f01006 bc 15,6(%r1) Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Hartkopp authored
Similar to referencing iptables rules by their line number this UID allows to reference created routing jobs, e.g. to alter configured data modifications. The UID is an optional non-zero value which can be provided at routing job creation time. When the UID is set the UID replaces the data modification configuration as job identification attribute e.g. at job removal time. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Tomas Krcka authored
This patch corrects addresses of acceptance filters. These registers are not in use, but values should be correct. Tested with MCP2515 and am3352 and also checked datasheets for MCP2515 and MCP2510. Signed-off-by: Tomas Krcka <tomas.krcka@nkgroup.cz> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix stack allocation in s390 BPF JIT, from Michael Holzheu. 2) Disable LRO on openvswitch paths, from Jiri Benc. 3) UDP early demux doesn't handle multicast group membership properly, fix from Shawn Bohrer. 4) Fix TX queue hang due to incorrect handling of mixed sized fragments and linearlization in i40e driver, from Anjali Singhai Jain. 5) Cannot use disable_irq() in timer handler of AMD xgbe driver, from Thomas Lendacky. 6) b2net driver improperly assumes pci_alloc_consistent() gives zero'd out memory, use dma_zalloc_coherent(). From Sriharsha Basavapatna. 7) Fix use-after-free in MPLS and ipv6, from Robert Shearman. 8) Missing neif_napi_del() calls in cleanup paths of b44 driver, from Hauke Mehrtens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: replace last open coded skb_orphan_frags with function call net: bcmgenet: power on MII block for all MII modes ipv6: Fix protocol resubmission ipv6: fix possible use after free of dev stats b44: call netif_napi_del() bridge: disable softirqs around br_fdb_update to avoid lockup Revert "bridge: use _bh spinlock variant for br_fdb_update to avoid lockup" mpls: fix possible use after free of device be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent() bridge: use _bh spinlock variant for br_fdb_update to avoid lockup amd-xgbe: Use disable_irq_nosync from within timer function rhashtable: add missing import <linux/export.h> i40e: Make sure to be in VEB mode if SRIOV is enabled at probe i40e: start up in VEPA mode by default i40e/i40evf: Fix mixed size frags and linearization ipv4/udp: Verify multicast group is ours in upd_v4_early_demux() openvswitch: disable LRO s390/bpf: fix bpf frame pointer setup s390/bpf: fix stack allocation
-
- 08 Jun, 2015 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull last-minute virtio fix from Michael Tsirkin: "This fixes a minor issue affecting multiqueue virtio net when user keeps changing the number of active queues and CPUs are added and removed by hotplug" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: Clear stale cpumask when setting irq affinity
-
Dan Murphy authored
Fix the device tree entries to modify the '_' to '-'. Also changes the names of the internal delay properties from -int- to -internal- as the -int- appeared as a keyword. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicholas Mc Guire authored
API compliance scanning with coccinelle flagged: ./drivers/atm/iphase.c:2621:4-20: WARNING: timeout (50) seems HZ dependent Numeric constants passed to schedule_timeout() make the effective timeout HZ dependent which does not seem intended. Fixed up by converting the constant to jiffies with msecs_to_jiffies() As this driver was introduced in the early 2.3 series it is most likely assuming HZ=100 so the constant 50 is converted to 500ms. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Kevin Hilman: "About 10 days worth of small bug fixes, and the (hopefully) final round fixes for from arm-soc land for the -rc cycle. Nothing special to note, but here's a brief summary of fixes by SoC type: - OMAP: small set of misc DT fixes; boot fix for THUMB2 kernel - mediatek: PMIC fixes; DT fix for model name - exynos: wakeup interupt fixes for 3250 - mvebu: revert mbus patch which broke DMA masters * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage ARM: dts: AM35xx: fix system control module clocks arm64: dts: mt8173-evb: fix model name ARM: exynos: Fix wake-up interrupts for Exynos3250 ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 ARM: dts: Fix dm816x to use right compatible flag for MUSB ARM: OMAP3: Fix booting with thumb2 kernel Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window" bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms. ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC soc: mediatek: Add compile dependency to pmic-wrapper soc: mediatek: PMIC wrap: Fix register state machine handling soc: mediatek: PMIC wrap: Fix clock rate handling
-
Florian Fainelli authored
Update the AFE_TX_CONFIG value to solve marginal rise/fall issues observed when the link is operating in 100BaseT. This workaround applies to GPHY revisions D0, E0 and newer. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Commit 70008aa5 ("skbuff: convert to skb_orphan_frags") replaced open coded tests of SKBTX_DEV_ZEROCOPY and skb_copy_ubufs with calls to helper function skb_orphan_frags. Apply that to the last remaining open coded site. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The RGMII block is currently only powered on when using RGMII or RGMII_NO_ID, which is not correct when using the GENET interface in MII or Reverse MII modes. We always need to power on the RGMII interface for this block to properly work, regardless of the MII mode in which we operate. Fixes: aa09677c ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-