- 09 Oct, 2017 16 commits
-
-
Andres Rodriguez authored
Use _INVALID to identify bad parameters and _UNSET to represent the lack of interest in a specific value. Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Andres Rodriguez authored
This is useful for changing an entity's priority at runtime. v2: don't modify the order of amd_sched_entity members Reviewed-by:
-
Andres Rodriguez authored
Returning invalid priorities as _NORMAL is a backwards compatibility quirk of amdgpu_ctx_ioctl(). Move this detail one layer up where it belongs. Signed-off-by:
-
Andres Rodriguez authored
Programming CP_HQD_QUEUE_PRIORITY enables a queue to take priority over other queues on the same pipe. Multiple queues on a pipe are timesliced so this gives us full precedence over other queues. Programming CP_HQD_PIPE_PRIORITY changes the SPI_ARB_PRIORITY of the wave as follows: 0x2: CS_H 0x1: CS_M 0x0: CS_L The SPI block will then dispatch work according to the policy set by SPI_ARB_PRIORITY. In the current policy CS_H is higher priority than gfx. In order to prevent getting stuck in loops of resources bouncing between GFX and high priority compute and introducing further latency, we statically reserve a portion of the pipe. v2: fix srbm_select to ring->queue and use ring->funcs->type v3: use AMD_SCHED_PRIORITY_* instead of AMDGPU_CTX_PRIORITY_* v4: switch int to enum amd_sched_priority v5: corresponding changes for srbm_lock v6: change CU reservation to PIPE_PERCENT allocation v7: use kiq instead of MMIO v8: back to MMIO, and make the implementation sleep safe. v9: corresponding changes for splitting HIGH into _HW/_SW Acked-by: -
Andres Rodriguez authored
Add an initial framework for changing the HW priorities of rings. The framework allows requesting priority changes for the lifetime of an amdgpu_job. After the job completes the priority will decay to the next lowest priority for which a request is still valid. A new ring function set_priority() can now be populated to take care of the HW specific programming sequence for priority changes. v2: set priority before emitting IB, and take a ref on amdgpu_job v3: use AMD_SCHED_PRIORITY_* instead of AMDGPU_CTX_PRIORITY_* v4: plug amdgpu_ring_restore_priority_cb into amdgpu_job_free_cb v5: use atomic for tracking job priorities instead of last_job v6: rename amdgpu_ring_priority_[get/put]() and align parameters v7: replace spinlocks with mutexes for KIQ compatibility v8: raise ring priority during cs_ioctl, instead of job_run v9: priority_get() before push_job() Reviewed-by:
-
Andres Rodriguez authored
Add a new context creation parameter to express a global context priority. The priority ranking in descending order is as follows: * AMDGPU_CTX_PRIORITY_HIGH_HW * AMDGPU_CTX_PRIORITY_HIGH_SW * AMDGPU_CTX_PRIORITY_NORMAL * AMDGPU_CTX_PRIORITY_LOW_SW * AMDGPU_CTX_PRIORITY_LOW_HW The driver will attempt to schedule work to the hardware according to the priorities. No latency or throughput guarantees are provided by this patch. This interface intends to service the EGL_IMG_context_priority extension, and vulkan equivalents. Setting a priority above NORMAL requires CAP_SYS_NICE or DRM_MASTER. v2: Instead of using flags, repurpose __pad v3: Swap enum values of _NORMAL _HIGH for backwards compatibility v4: Validate usermode priority and store it v5: Move priority validation into amdgpu_ctx_ioctl(), headline reword v6: add UAPI note regarding priorities requiring CAP_SYS_ADMIN v7: remove ctx->priority v8: added AMDGPU_CTX_PRIORITY_LOW, s/CAP_SYS_ADMIN/CAP_SYS_NICE v9: change the priority parameter to __s32 v10: split priorities into _SW and _HW v11: Allow DRM_MASTER without CAP_SYS_NICE Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
-
Andres Rodriguez authored
Introduce a flag to signal that access to a BO will be synchronized through an external mechanism. Currently all buffers shared between contexts are subject to implicit synchronization. However, this is only required for protocols that currently don't support an explicit synchronization mechanism (DRI2/3). This patch introduces the AMDGPU_GEM_CREATE_EXPLICIT_SYNC, so that users can specify when it is safe to disable implicit sync. v2: only disable explicit sync in amdgpu_cs_ioctl Reviewed-by:
-
Andres Rodriguez authored
Reviewed-by:
-
Christian König authored
Convert GTT mappings into linear ones for huge page handling. v2: use fragment size as minimum for linear conversion Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Acked-by:
-
Christian König authored
Instead of mapping them bit by bit map/unmap all consecutive pages as in one call. v2: test for consecutive pages instead of using compound page order. Signed-off-by:
-
Christian König authored
Totally surprisingly this is more efficient than doing it page by page. Signed-off-by:
-
Horace Chen authored
SR-IOV need to reserve a piece of shared VRAM at the exact place to exchange data betweem PF and VF. The start address and size of the shared mem are passed to guest through VBIOS structure VRAM_UsageByFirmware. VRAM_UsageByFirmware is a general feature in VBIOS, it indicates that VBIOS need to reserve a piece of memory on the VRAM. Because the mem address is specified. Reserve it early in amdgpu_ttm_init to make sure that it can monoplize the space. Signed-off-by:
Horace Chen <horace.chen@amd.com> Reviewed-by:
-
Yong Zhao authored
Without the additional bits set in PDEs/PTEs, the ATC memory access would have failed on Raven. Signed-off-by:
Yong Zhao <yong.zhao@amd.com> Acked-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More new stuff for 4.15. Highlights: - Add clock query interface for raven - Add new FENCE_TO_HANDLE ioctl - UVD video encode ring support on polaris - transparent huge page DMA support - deadlock fixes - compute pipe lru tweaks - powerplay cleanups and regression fixes - fix duplicate symbol issue with radeon and amdgpu - misc bug fixes * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (72 commits) drm/radeon/dp: make radeon_dp_get_dp_link_config static drm/radeon: move ci_send_msg_to_smc to where it's used drm/amd/sched: fix deadlock caused by unsignaled fences of deleted jobs drm/amd/sched: NULL out the s_fence field after run_job drm/amd/sched: move adding finish callback to amd_sched_job_begin drm/amd/sched: fix an outdated comment drm/amd/sched: rename amd_sched_entity_pop_job drm/amdgpu: minor coding style fix drm/ttm: add transparent huge page support for DMA allocations v2 drm/ttm: add support for different pool sizes drm/ttm: remove unsued options from ttm_mem_global_alloc_page drm/amdgpu: add uvd enc irq drm/amdgpu: add uvd enc ib test drm/amdgpu: add uvd enc ring test drm/amdgpu: add uvd enc vm functions (v2) drm/amdgpu: add uvd enc into run queue drm/amdgpu: add uvd enc rings drm/amdgpu: add new uvd enc ring methods drm/amdgpu: add uvd enc command in header drm/amdgpu: add uvd enc registers in header ...
-
Alex Deucher authored
It's not used outside this file any longer. Reviewed-by:
-
Alex Deucher authored
It's used in ci_dpm.c so move it there and make it static. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 06 Oct, 2017 24 commits
-
-
Nicolai Hähnle authored
Highly concurrent Piglit runs can trigger a race condition where a pending SDMA job on a buffer object is never executed because the corresponding process is killed (perhaps due to a crash). Since the job's fences were never signaled, the buffer object was effectively leaked. Worse, the buffer was stuck wherever it happened to be at the time, possibly in VRAM. The symptom was user space processes stuck in interruptible waits with kernel stacks like: [<ffffffffbc5e6722>] dma_fence_default_wait+0x112/0x250 [<ffffffffbc5e6399>] dma_fence_wait_timeout+0x39/0xf0 [<ffffffffbc5e82d2>] reservation_object_wait_timeout_rcu+0x1c2/0x300 [<ffffffffc03ce56f>] ttm_bo_cleanup_refs_and_unlock+0xff/0x1a0 [ttm] [<ffffffffc03cf1ea>] ttm_mem_evict_first+0xba/0x1a0 [ttm] [<ffffffffc03cf611>] ttm_bo_mem_space+0x341/0x4c0 [ttm] [<ffffffffc03cfc54>] ttm_bo_validate+0xd4/0x150 [ttm] [<ffffffffc03cffbd>] ttm_bo_init_reserved+0x2ed/0x420 [ttm] [<ffffffffc042f523>] amdgpu_bo_create_restricted+0x1f3/0x470 [amdgpu] [<ffffffffc042f9fa>] amdgpu_bo_create+0xda/0x220 [amdgpu] [<ffffffffc04349ea>] amdgpu_gem_object_create+0xaa/0x140 [amdgpu] [<ffffffffc0434f97>] amdgpu_gem_create_ioctl+0x97/0x120 [amdgpu] [<ffffffffc037ddba>] drm_ioctl+0x1fa/0x480 [drm] [<ffffffffc041904f>] amdgpu_drm_ioctl+0x4f/0x90 [amdgpu] [<ffffffffbc23db33>] do_vfs_ioctl+0xa3/0x5f0 [<ffffffffbc23e0f9>] SyS_ioctl+0x79/0x90 [<ffffffffbc864ffb>] entry_SYSCALL_64_fastpath+0x1e/0xad [<ffffffffffffffff>] 0xffffffffffffffff Note: The correctness of this change depends on the earlier commit "drm/amd/sched: move adding finish callback to amd_sched_job_begin" v2: set an error on the finished fence Signed-off-by:Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
Nicolai Hähnle authored
amd_sched_process_job drops the fence reference, so NULL out the s_fence field before adding it as a callback to guard against accidentally using s_fence after it may have be freed. v2: add a clarifying comment Signed-off-by:
-
Nicolai Hähnle authored
The finish callback is responsible for removing the job from the ring mirror list, among other things. It makes sense to add it as callback in the place where the job is added to the ring mirror list. Signed-off-by:
-
Nicolai Hähnle authored
Signed-off-by:
-
Nicolai Hähnle authored
The function does not actually remove the job from the FIFO, so "peek" describes it better. Signed-off-by:
-
Christian König authored
Fix two minor 80 char issues. Signed-off-by:
-
Christian König authored
Try to allocate huge pages when it makes sense. v2: fix comment and use ifdef Signed-off-by:
-
Christian König authored
Correctly handle different page sizes in the memory accounting. Signed-off-by:
-
Christian König authored
Nobody is actually using that, remove it. Signed-off-by:
-
James Zhu authored
Add UVD encode IRQ handle and enable the UVD encode trap Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-and-Tested-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
James Zhu authored
Generate create/destroy messages to test UVD encode indirect buffer function. And enable UVD encode IB test during device initialization. Signed-off-by:
-
James Zhu authored
Add UVD encode ring test functions. And enable UVD encode ring test during UVD encode hardware initialization. Signed-off-by:
-
James Zhu authored
Add UVD encode ring vm functions to handle frame ecoding. v2: squash in warning fix (James) Signed-off-by:
-
James Zhu authored
Signed-off-by:
-
James Zhu authored
UVD 6.3 has two UVD encode rings. Add the ring structures and initialize the hw ring buffers. Currently only ASIC Polaris10/11/12 uses UVD6.3 encode engine on HEVC encoding. Signed-off-by:
-
James Zhu authored
Add new UVD encode ring methods get/set/emit/flush/sync to support uvd6.3 HEVC encoding Signed-off-by:
-
James Zhu authored
Add UVD encode command interface definition for uvd6.3 HEVC encoding Signed-off-by:
-
James Zhu authored
Add UVD encode write/read/size/base registers definition for uvd6.3 HEVC ecoding Signed-off-by:
-
Rex Zhu authored
regression issue caused by commit 47047263 ("drm/amd/powerplay: delete eventmgr related files.") Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Tom St Denis authored
This partially reverts 0b6b4cbf77c995a34a4ec3d705a636434dadc51a and fixes the noise issues on Tonga. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Evan Quan authored
Signed-off-by:
-
Evan Quan authored
v2: squash in rebase fix (Tom) Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
-
Evan Quan authored
v2: squash in rebase fix (Tom) Signed-off-by:
-
Evan Quan authored
v2: squash in rebase fix (Tom) Signed-off-by:
-
