Skip to content

L
linux
Switch branch/tag
  1. 03 Nov, 2017 5 commits
  3. 02 Nov, 2017 2 commits
    • Arnd Bergmann's avatar
      skd: use ktime_get_real_seconds() · 474f5da2
      Arnd Bergmann authored 
      Like many storage drivers, skd uses an unsigned 32-bit number for
interchanging the current time with the firmware. This will overflow in
y2106 and is otherwise safe.

However, the get_seconds() function is generally considered deprecated
since the behavior is different between 32-bit and 64-bit architectures,
and using it may indicate a bigger problem.

To annotate that we've thought about this, let's add a comment here
and migrate to the ktime_get_real_seconds() function that consistently
returns a 64-bit number.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      474f5da2
    • Arnd Bergmann's avatar
      block: fix CDROM dependency on BLK_DEV · c091fbe9
      Arnd Bergmann authored 
      After the cdrom cleanup, I get randconfig warnings for some configurations:

warning: (BLK_DEV_IDECD && BLK_DEV_SR) selects CDROM which has unmet direct dependencies (BLK_DEV)

This adds an explicit BLK_DEV dependency for both drivers. The other
drivers that select 'CDROM' already have this and don't need a change.

Fixes: 2a750166 ("block: Rework drivers/cdrom/Makefile")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c091fbe9
  5. 01 Nov, 2017 25 commits
  7. 31 Oct, 2017 1 commit
  9. 30 Oct, 2017 6 commits
    • Liang Chen's avatar
      bcache: explicitly destroy mutex while exiting · 330a4db8
      Liang Chen authored 
      mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.

As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.
Signed-off-by: default avatarLiang Chen <liangchen.linux@gmail.com>
Reviewed-by: default avatarMichael Lyle <mlyle@lyle.org>
Reviewed-by: default avatarColy Li <colyli@suse.de>
Reviewed-by: default avatarEric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      330a4db8
    • tang.junhui's avatar
      bcache: fix wrong cache_misses statistics · c1573137
      tang.junhui authored 
      Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.

[ML: applied by 3-way merge]
Signed-off-by: default avatartang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: default avatarMichael Lyle <mlyle@lyle.org>
Reviewed-by: default avatarColy Li <colyli@suse.de>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c1573137
    • Tang Junhui's avatar
      bcache: update bucket_in_use in real time · d44c2f9e
      Tang Junhui authored 
      bucket_in_use is updated in gc thread which triggered by invalidating or
writing sectors_to_gc dirty data, It's a long interval. Therefore, when we
use it to compare with the threshold, it is often not timely, which leads
to inaccurate judgment and often results in bucket depletion.

We have send a patch before, by the means of updating bucket_in_use
periodically In gc thread, which Coly thought that would lead high
latency, In this patch, we add avail_nbuckets to record the count of
available buckets, and we calculate bucket_in_use when alloc or free
bucket in real time.

[edited by ML: eliminated some whitespace errors]
Signed-off-by: default avatarTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: default avatarMichael Lyle <mlyle@lyle.org>
Reviewed-by: default avatarMichael Lyle <mlyle@lyle.org>
Reviewed-by: default avatarColy Li <colyli@suse.de>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      d44c2f9e
    • Elena Reshetova's avatar
      bcache: convert cached_dev.count from atomic_t to refcount_t · 3b304d24
      Elena Reshetova authored 
      atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable cached_dev.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: default avatarKees Cook <keescook@chromium.org>
Reviewed-by: default avatarDavid Windsor <dwindsor@gmail.com>
Reviewed-by: default avatarHans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: default avatarMichael Lyle <mlyle@lyle.org>
Signed-off-by: default avatarElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      3b304d24
    • Coly Li's avatar
      bcache: only permit to recovery read error when cache device is clean · d59b2379
      Coly Li authored 
      When bcache does read I/Os, for example in writeback or writethrough mode,
if a read request on cache device is failed, bcache will try to recovery
the request by reading from cached device. If the data on cached device is
not synced with cache device, then requester will get a stale data.

For critical storage system like database, providing stale data from
recovery may result an application level data corruption, which is
unacceptible.

With this patch, for a failed read request in writeback or writethrough
mode, recovery a recoverable read request only happens when cache device
is clean. That is to say, all data on cached device is up to update.

For other cache modes in bcache, read request will never hit
cached_dev_read_error(), they don't need this patch.

Please note, because cache mode can be switched arbitrarily in run time, a
writethrough mode might be switched from a writeback mode. Therefore
checking dc->has_data in writethrough mode still makes sense.

Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
    bug to fix, and option to permit it is unnecessary. So this version
    the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure  to
    allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.

[small change to patch comment spelling by mlyle]
Signed-off-by: default avatarColy Li <colyli@suse.de>
Signed-off-by: default avatarMichael Lyle <mlyle@lyle.org>
Reported-by: default avatarArne Wolf <awolf@lenovo.com>
Reviewed-by: default avatarMichael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Kai Krakow <hurikhan77@gmail.com>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      d59b2379
    • Bart Van Assche's avatar
      block: Fix a race between blk_cleanup_queue() and timeout handling · 4e9b6f20
      Bart Van Assche authored 
      Make sure that if the timeout timer fires after a queue has been
marked "dying" that the affected requests are finished.
Reported-by: default avatarchenxiang (M) <chenxiang66@hisilicon.com>
Fixes: commit 287922eb ("block: defer timeouts to a workqueue")
Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
Tested-by: default avatarchenxiang (M) <chenxiang66@hisilicon.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      4e9b6f20
  11. 27 Oct, 2017 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7