- 27 Sep, 2012 17 commits
-
-
David S. Miller authored
GCC refuses to recognize that all error control flows do in fact set err to something. Add an explicit initialization to shut it up. net/sched/sch_drr.c: In function ‘drr_enqueue’: net/sched/sch_drr.c:359:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] net/sched/sch_qfq.c: In function ‘qfq_enqueue’: net/sched/sch_qfq.c:885:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
GCC can't see that in all non-error-return paths we do in fact set *using_dac to something. Add an explicit initialization to remove this warning: drivers/net/ethernet/brocade/bna/bnad.c: In function ‘bnad_pci_probe’: drivers/net/ethernet/brocade/bna/bnad.c:3079:5: warning: ‘using_dac’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/brocade/bna/bnad.c:3233:7: note: ‘using_dac’ was declared here Signed-off-by: -
Konstantin Khlebnikov authored
fix copy-paste error introduced in linux-next commit "ipv6: add a new namespace for nf_conntrack_reasm" Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Amerigo Wang <amwang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Acked-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Ivan Vecera authored
Current VFs enumeration algorithm used in be_find_vfs does not take domain number into the match. The match found in igb/ixgbe is more elegant and safe. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
stephen hemminger authored
Linux tunnels were written before RFC6040 and therefore never implemented the corner case of ECN getting set in the outer header and the inner header not being ready for it. Section 4.2. Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. This patch moves the ECN decap logic out of the individual tunnels into a common place. It also adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Overloads rx_frame_error to keep track of ECN related error. Thanks to Chris Wright who caught this while reviewing the new VXLAN tunnel. This code was tested by injecting faulty logic in other end GRE to send incorrectly encapsulated packets. Signed-off-by:Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
stephen hemminger authored
The handlers for xfrm_tunnel are always invoked with rcu read lock already. Signed-off-by:
-
stephen hemminger authored
The gre function pointers for receive and error handling are always called (from gre.c) with rcu_read_lock already held. Signed-off-by:
-
stephen hemminger authored
GRE driver incorrectly uses zero as a flag value. Zero is a perfectly valid value for key, and the tunnel should match packets with no key only with tunnels created without key, and vice versa. This is a slightly visible change since previously it might be possible to construct a working tunnel that sent key 0 and received only because of the key wildcard of zero. I.e the sender sent key of zero, but tunnel was defined without key. Note: using gre key 0 requires iproute2 utilities v3.2 or later. The original utility code was broken as well. Signed-off-by:
-
Daniel Borkmann authored
This patch is a follow-up for patch "filter: add XOR instruction for use with X/K" that implements BPF SPARC JIT parts for the BPF XOR operation. Signed-off-by:
Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by:
-
LEROY Christophe authored
This patch adds proper handling of the buggy revision A2 of LXT973 phy, adding precautions linked to ERRATA Item 4: Revision A2 of LXT973 chip randomly returns the contents of the previous even register when you read a odd register regularly Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vipul Pandya authored
This patch adds a new common code routine to upgrade an adapter's firmware. This routine handles all of the complexities of working with the the existing adapter firmware in order to quiesce the adapter and uP, etc. For an automatic upgrade it will send a HELLO command to check if cxgb4 want/can upgrade firmware, i.e. if cxgb4 is MASTER and has newer firmware that it wants to load and call the new common code routine t4_fw_upgrade. Note that it should not issue a RESET command after a successful firmware upgrade. Signed-off-by:
Jay Hernandez <jay@chelsio.com> Signed-off-by:
Vipul Pandya <vipul@chelsio.com> Signed-off-by:
-
Vipul Pandya authored
If a card had already been initialized, on reloading cxgb4 driver firmware required an upgrade but the upgrade did not happen. In that case a mailbox timeout would occur during T4 configuration file stuff. The fix is to let the caller know the firmware was not upgraded so a reset would be issued before starting the T4 config stuff. Signed-off-by:
-
Vipul Pandya authored
In case if user defined configuration file at /lib/firmware/cxgb4/t4-config.txt location and also factory default configuration file written to FLASH are not present then driver will use hardwired configuration settings. Signed-off-by:
-
Vipul Pandya authored
Starting with T4 firmware version 1.3.11.0 the firmware now supports device configuration via a Firmware Configuration File. The Firmware Configuration File was primarily developed in order to centralize all of the configuration, resource allocation, etc. for Unified Wire operation where multiple Physical / Virtual Function Drivers would be using a T4 adapter simultaneously. The Firmware Configuration file can live in three locations as shown below in order of precedence. 1) User defined configuration file: /lib/firmware/cxgb4/t4-config.txt 2) Factory Default configuration file written to FLASH within the manufacturing process. 3) Hardwired driver configuration. Signed-off-by:
-
Vipul Pandya authored
This patch adds new enums and macros to enable T4 configuration file support. It also removes duplicate macro definitions. It fixes the build failure in cxgb4vf driver introduced because of old macro definition removal. It also performs SGE initialization based on T4 configuration file is provided or not. If it is provided then it uses the parameters provided in it otherwise it uses hard coded values. Signed-off-by:
-
Vipul Pandya authored
This patch implements two new functions t4_mem_win_read and t4_memory_read. These new functions can be used to read memory via the PCIE memory window. Please note, for proper execution of these functions PCIE_MEM_ACCESS_BASE_WIN registers must be setup correctly like how setup_memwin in the cxgb4 driver does it. Signed-off-by:
-
Vipul Pandya authored
Signed-off-by:
-
- 25 Sep, 2012 2 commits
-
-
Andy Shevchenko authored
The commit 5e953778 ("ipconfig: add nameserver IPs to kernel-parameter ip=") introduces ic_nameservers_predef() that defined only for BOOTP. However it is used by ip_auto_config_setup() as well. This patch moves it outside of #ifdef BOOTP. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
Commit 5640f768 ("net: use a per task frag allocator") accidentally contained an unrelated change to net/ipv4/raw.c, later committed (without the pr_err() debugging bits) in net tree as commit ab43ed8b (ipv4: raw: fix icmp_filter()) This patch reverts this glitch, noticed by Stephen Rothwell. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 24 Sep, 2012 21 commits
-
-
Daniel Borkmann authored
This patch is a follow-up for patch "filter: add XOR instruction for use with X/K" that implements BPF x86 JIT parts for the BPF XOR operation. Signed-off-by:
-
Daniel Borkmann authored
SKF_AD_ALU_XOR_X has been added a while ago, but as an 'ancillary' operation that is invoked through a negative offset in K within BPF load operations. Since BPF_MOD has recently been added, BPF_XOR should also be part of the common ALU operations. Removing SKF_AD_ALU_XOR_X might not be an option since this is exposed to user space. Signed-off-by:
-
Steven J. Hill authored
The MIPSsim platform is no longer supported or used. This patch deletes the Ethernet driver. Signed-off-by:
Steven J. Hill <sjhill@mips.com> Signed-off-by:
-
Eric Dumazet authored
We currently use a per socket order-0 page cache for tcp_sendmsg() operations. This page is used to build fragments for skbs. Its done to increase probability of coalescing small write() into single segments in skbs still in write queue (not yet sent) But it wastes a lot of memory for applications handling many mostly idle sockets, since each socket holds one page in sk->sk_sndmsg_page Its also quite inefficient to build TSO 64KB packets, because we need about 16 pages per skb on arches where PAGE_SIZE = 4096, so we hit page allocator more than wanted. This patch adds a per task frag allocator and uses bigger pages, if available. An automatic fallback is done in case of memory pressure. (up to 32768 bytes per frag, thats order-3 pages on x86) This increases TCP stream performance by 20% on loopback device, but also benefits on other network devices, since 8x less frags are mapped on transmit and unmapped on tx completion. Alexander Duyck mentioned a probable performance win on systems with IOMMU enabled. Its possible some SG enabled hardware cant cope with bigger fragments, but their ndo_start_xmit() should already handle this, splitting a fragment in sub fragments, since some arches have PAGE_SIZE=65536 Successfully tested on various ethernet devices. (ixgbe, igb, bnx2x, tg3, mellanox mlx4) Signed-off-by:
Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by:
-
Claudiu Manoil authored
This is primarily to address transmission timeout occurrences, when multiple H/W Tx queues are being used concurrently. Because in the priority scheduling mode the controller does not service the Tx queues equally (but in ascending index order), Tx timeouts are being triggered rightaway for a basic test with multiple simultaneous connections like: iperf -c <server_ip> -n 100M -P 8 resulting in kernel trace: NETDEV WATCHDOG: eth1 (fsl-gianfar): transmit queue <X> timed out ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 ... and controller reset during intense traffic, and possibly further complications. This patch changes the default H/W Tx scheduling setting (TXSCHED) for multi-queue devices, from priority scheduling mode to a weighted round robin mode with equal weights for all H/W Tx queues, and addresses the issue above. Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Eric Dumazet authored
loopback current mtu of 16436 bytes allows no more than 3 MSS TCP segments per frame, or 48 Kbytes. Changing mtu to 64K allows TCP stack to build large frames and significantly reduces stack overhead. Performance boost on bulk TCP transferts can be up to 30 %, partly because we now have one ACK message for two 64KB segments, and a lower probability of hitting /proc/sys/net/ipv4/tcp_reordering default limit. Signed-off-by:
-
David S. Miller authored
All callers provide a non-NULL scm argument. Signed-off-by: -
Merav Sicron authored
This patch changes the definition of bnx2x_tests_str_arr from static char pointer to static const char bi-directional array. Also the bnx2x_get_strings function is simplified. Reported-by:
Joe Perches <joe@perches.com> Reported-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Merav Sicron <meravs@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Wei Yongjun authored
ipaddr has been allocated in function qeth_l3_add_vipa() but does not free before leaving from the error handling cases. The same problem also exists in function qeth_l3_add_rxip(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Sebastian Ott authored
Make sure that all ccws used for writing are initialized with zeros - especially since the last ccw contains a TIC for which the unused fields have to be zeros. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Cleanup the qeth_get_channel_path_desc function and rename it to qeth_update_from_chp_desc. No functional change. Signed-off-by:
-
git://1984.lsi.us.es/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== This patchset contains updates for your net-next tree, they are: * Mostly fixes for the recently pushed IPv6 NAT support: - Fix crash while removing nf_nat modules from Patrick McHardy. - Fix unbalanced rcu_read_unlock from Ulrich Weber. - Merge NETMAP and REDIRECT into one single xt_target module, from Jan Engelhardt. - Fix Kconfig for IPv6 NAT, which allows inconsistent configurations, from myself. * Updates for ipset, all of the from Jozsef Kadlecsik: - Add the new "nomatch" option to obtain reverse set matching. - Support for /0 CIDR in hash:net,iface set type. - One non-critical fix for a rare crash due to pass really wrong configuration parameters. - Coding style cleanups. - Sparse fixes. - Add set revision supported via modinfo.i * One extension for the xt_time match, to support matching during the transition between two days with one single rule, from Florian Westphal. * Fix maximum packet length supported by nfnetlink_queue and add NFQA_CAP_LEN attribute, from myself. You can notice that this batch contains a couple of fixes that may go to 3.6-rc but I don't consider them critical to push them: * The ipset fix for the /0 cidr case, which is triggered with one inconsistent command line invocation of ipset. * The nfnetlink_queue maximum packet length supported since it requires the new NFQA_CAP_LEN attribute to provide a full workaround for the described problem. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
This patch adds the NFQA_CAP_LEN attribute that allows us to know what is the real packet size from user-space (even if we decided to retrieve just a few bytes from the packet instead of all of it). Security software that inspects packets should always check for this new attribute to make sure that it is inspecting the entire packet. This also helps to provide a workaround for the problem described in: http://marc.info/?l=netfilter-devel&m=134519473212536&w=2 Original idea from Florian Westphal. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The packets that we send via NFQUEUE are encapsulated in the NFQA_PAYLOAD attribute. The length of the packet in userspace is obtained via attr->nla_len field. This field contains the size of the Netlink attribute header plus the packet length. If the maximum packet length is specified, ie. 65535 bytes, and packets in the range of (65531,65535] are sent to userspace, the attr->nla_len overflows and it reports bogus lengths to the application. To fix this, this patch limits the maximum packet length to 65531 bytes. If larger packet length is specified, the packet that we send to user-space is truncated to 65531 bytes. To support 65535 bytes packets, we have to revisit the idea of the 32-bits Netlink attribute length. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch allows the FTP helper to pickup the sequence tracking from the first packet seen. This is useful to fix the breakage of the first FTP command after the failover while using conntrackd to synchronize states. The seq_aft_nl_num field in struct nf_ct_ftp_info has been shrinked to 16-bits (enough for what it does), so we can use the remaining 16-bits to store the flags while using the same size for the private FTP helper data. Signed-off-by: -
Florian Westphal authored
Currently, if you want to do something like: "match Monday, starting 23:00, for two hours" You need two rules, one for Mon 23:00 to 0:00 and one for Tue 0:00-1:00. The rule: --weekdays Mo --timestart 23:00 --timestop 01:00 looks correct, but it will first match on monday from midnight to 1 a.m. and then again for another hour from 23:00 onwards. This permits userspace to explicitly ignore the day transition and match for a single, continuous time period instead. Signed-off-by:
-
Alexander Duyck authored
With recent kernel changes we can now return errors on a failure to setup a VLAN filter. This patch takes advantage of that opportunity so that we can return either an EIO error in the case of a mailbox failure, or an EACCESS error in the case of being denied access to the VLAN filter table by the PF. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change fixes the ixgbevf driver so that it can correctly drop a frame should it receive a jumbo frame. Signed-off-by:
-
Greg Rose authored
While fixing up a patch from Alex Duyck to use q_vectors in ring containers to update the ITR I bungled it and missed actually updating the counters in the ring container q_vectors. This patch fixes my mistake and makes interrupt moderation actually work. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
